Evaluation of a thermally driven heat pump for solar heating and cooling applications

Exploiting solar energy technology for both heating and cooling purposes has the potential of meeting an appreciable portion of the energy demand in buildings throughout the year. By developing an integrated, multi-purpose solar energy system, that can operate all twelve months of the year, a high utilisation factor can be achieved which translates to more economical systems. However, there are still some techno-economic barriers to the general commercialisation and market penetration of such technologies. These are associated with high system and installation costs, significant system complexity, and lack of knowledge of system implementation and expected performance. A sorption heat pump module that can be integrated directly into a solar thermal collector has thus been developed in order to tackle the aforementioned market barriers. This has been designed for the development of cost-effective pre-engineered solar energy system kits that can provide both heating and cooling. This thesis summarises the characterisation studies of the operation of individual sorption modules, sorption module integrated solar collectors and a full solar heating and cooling system employing sorption module integrated collectors. Key performance indicators for the individual sorption modules showed cooling delivery for 6 hours at an average power of 40 W and a temperature lift of 21°C. Upon integration of the sorption modules into a solar collector, measured solar radiation energy to cooling energy conversion efficiencies (solar cooling COP) were between 0.10 and 0.25 with average cooling powers between 90 and 200 W/m2 collector aperture area. Further investigations of the sorption module integrated collectors implementation in a full solar heating and cooling system yielded electrical cooling COP ranging from 1.7 to 12.6 with an average of 10.6 for the test period. Additionally, simulations were performed to determine system energy and cost saving potential for various system sizes over a full year of operation for a 140 m2 single-family dwelling located in Madrid, Spain. Simulations yielded an annual solar fraction of 42% and potential cost savings of €386 per annum for a solar heating and cooling installation employing 20m2 of sorption integrated collectors.

A Model of Normative Power

A power describes the ability of an agent to act in some way. While this notion of power is critical in the context of organisational dynamics, and has been studied by others in this light, it must be constrained so as to be useful in any practical application. In particular, we are concerned with how power may be used by agents to govern the imposition and management of norms, and how agents may dynamically assign norms to other agents within a multi-agent system. We approach the problem by defining a syntax and semantics for powers governing the creation, deletion, or modification of norms within a system, which we refer to as normative powers. We then extend this basic model to accommodate more general powers that can modify other powers within the system, and describe how agents playing certain roles are able to apply powers, changing the system’s norms, and also the powers themselves. We examine how the powers found within a system may change as the status of norms change, and show how standard norm modification operations — such as the derogation, annulment and modification of norms— may be represented within our system.

Enforcement in environmental law: an economic analysis of citizen suits

Previous to 1970, state and federal agencies held exclusive enforcement responsibilities over the violation of pollution control standards. However, recognizing that the government had neither the time nor resources to provide full enforcement, Congress created citizen suits. Citizen suits, first amended to the Clean Air Act in 1970, authorize citizens to act as private attorney generals and to sue polluters for violating the terms of their operating permits. Since that time, Congress has included citizen suits in 13 other federal statutes. The citizen suit phenomenon is sufficiently new that little is known about it. However, we do know that citizen suits have increased rapidly since the early 1980's. Between 1982 and 1986 the number of citizen suits jumped from 41 to 266. Obviously, they are becoming a widely used method of enforcing the environmental statutes. This paper will provide a detailed description, analysis and evaluation of citizen suits. It will begin with an introduction and will then move on to provide some historic and descriptive background on such issues as how citizen suit powers are delegated, what limitations are placed on the citizens, what parties are on each side of the suit, what citizens can enforce against, and the types of remedies available. The following section of the paper will provide an economic analysis of citizen suits. It will begin with a discussion of non-profit organizations, especially non-profit environmental organizations, detailing the economic factors which instigate their creation and activities. Three models will be developed to investigate the evolution and effects of citizen suits. The first model will provide an analysis of the demand for citizen suits from the point of view of a potential litigator showing how varying remedies, limitations and reimbursement procedures can effect both the level and types of activities undertaken. The second model shows how firm behavior could be expected to respond to citizen suits. Finally, a third model will look specifically at the issue of efficiency to determine whether the introduction of citizen enforcement leads to greater or lesser economic efficiency in pollution control. The database on which the analysis rests consists of 1205 cases compiled by the author. For the purposes of this project this list of citizen suit cases and their attributes were computerized and used to test a series of hypotheses derived from three original economic models. The database includes information regarding plaintiffs, defendants date notice and/or complaint was filed and statutes involved in the claim. The analysis focuses on six federal environmental statutes (Clean Water Act} Resource Conservation and Recovery Act, Comprehensive Environmental Response Compensation and Liability Act, Clean Air Act, Toxic Substances Control Act, and Safe Drinking Water Act) because the majority of citizen suits have occurred under these statutes.

Brazil: The Underlying Ideas of Regional Policies

"Brazil: The Underlying Ideas of Regional Policies," in FLEMES, D. Regional Leadership in the Global System. Ashgate Publisher, 2010.

Citizens and the future of multilateralism in a polycentric world at 2030: the perspectives of emerging countries for the trading system: the impasse of WTO, the trends of mega agreements, the logic of value chains and the advent of consumers concerns on international trade

A new paradigm is modeling the World: evolutionary innovations in all fronts, new information technologies, huge mobility of capital, use of risky financial tools, globalization of production, new emerging powers and the impact of consumer concerns on governmental policies. These phenomena are shaping the World and forcing the advent of a new World Order in the Multilateral Monetary, Financial, and Trading System. The effects of this new paradigm are also transforming global governance. The political and economic orders established after the World War and centered on the multilateral model of UN, IMF, World Bank, and the GATT, leaded by the developed countries, are facing significant challenges. The rise of China and emerging countries shifted the old model to a polycentric World, where the governance of these organizations are threatened by emerging countries demanding a bigger participation in the role and decision boards of these international bodies. As a consequence, multilateralism is being confronted by polycentrism. Negotiations for a more representative voting process and the pressure for new rules to cope with the new demands are paralyzing important decisions. This scenario is affecting seriously not only the Monetary and Financial Systems but also the Multilateral Trading System. International trade is facing some significant challenges: a serious deadlock to conclude the last round of the multilateral negotiation at the WTO, the fragmentation of trade rules by the multiplication of preferential and mega agreements, the arrival of a new model of global production and trade leaded by global value chains that is threatening the old trade order, and the imposition of new sets of regulations by private bodies commanded by transnationals to support global value chains and non-governmental organizations to reflect the concerns of consumers in the North based on their precautionary attitude about sustainability of products made in the World. The lack of any multilateral order in this new regulation is creating a big cacophony of rules and developing a new regulatory war of the Global North against the Global South. The objective of this paper is to explore how these challenges are affecting the Tradinge System and how it can evolve to manage these new trends.

Anatomy of relationship significance: a critical realist exploration

Markets-as-networks (MAN) theorists contend, at least tacitly, the significance of business relationships to the firm – that is, business relationships contribute somewhat to corporate survival or growth. One does not deny the existence of significant business relationships but sustain, in contrast to the consensus within the MAN theory, that relationship significance should not be a self-evident assumption. For significance cannot be a taken-for-granted property of each and every one of the firm’s business relationships. The authors adopt explicitly a critical realist metatheoretical position in this conceptual paper and claim that relationship significance is an event of the business world, whose causes remain yet largely unidentified. Where the powers and liabilities of business relationships (i.e., relationship functions and dysfunctions) are put to work, inevitably under certain contingencies (namely the surrounding networks and markets), relationship effects ensue for the firm (often benefits in excess of sacrifices, i.e., relationship value) and as a consequence relationship significance is likely to be brought about. In addition, relationship significance can result from the dual impact that business relationships may have on the structure and powers and liabilities of the firm, that is, on corporate nature and scope, respectively.

Thermodynamic analysis of direct steam reforming of ethanol in molten carbonate fuel cell

Fuel cell as molten carbonate fuel cell (MCFC) operates at high temperatures. Thus, cogeneration processes may be performed, generating heat for its own process or for other purposes of steam generation in the industry. The use of ethanol is one of the best options because this is a renewable and less environmentally offensive fuel, and is cheaper than oil-derived hydrocarbons, as in the case of Brazil. In that country, because of technical, environmental, and economic advantages, the use of ethanol by steam reforming process has been the most investigated process. The objective of this study is to show a thermodynamic analysis of steam reforming of ethanol, to determine the best thermodynamic conditions where the highest volumes of products are produced, making possible a higher production of energy, that is, a more efficient use of resources. To attain this objective, mass and energy balances were performed. Equilibrium constants and advance degrees were calculated to get the best thermodynamic conditions to attain higher reforming efficiency and, hence, higher electric efficiency, using the Nernst equation. The advance degree (according to Castellan 1986, Fundamentos da Fisica/Quimica, Editora LTC, Rio de Janeiro, p. 529, in Portuguese) is a coefficient that indicates the evolution of a reaction, achieving a maximum value when all the reactants' content is used of reforming increases when the operation temperature also increases and when the operation pressure decreases. However, at atmospheric pressure (1 atm), the advance degree tends to stabilize in temperatures above 700 degrees C; that is, the volume of supplemental production of reforming products is very small with respect to high use of energy resources necessary. The use of unused ethanol is also suggested for heating of reactants before reforming. The results show the behavior of MCFC. The current density, at the same tension, is higher at 700 degrees C than other studied temperatures such as 600 and 650 degrees C. This fact occurs due to smaller use of hydrogen at lower temperatures that varies between 46.8% and 58.9% in temperatures between 600 and 700 degrees C. The higher calculated current density is 280 mA/cm(2). The power density increases when the volume of ethanol to be used also increases due to higher production of hydrogen. The highest produced powers at 190 mA/cm(2) are 99.8, 109.8, and 113.7 mW/cm(2) for 873, 923, and 973 K, respectively. The thermodynamic efficiency has the objective to show the connection among operational conditions and energetic factors, which are some parameters that describe a process of internal steam reforming of ethanol.

Optical and electrical properties of polymerizing plasmas and their correlation with DLC film properties

Diamond-like carbon (DLC) films were grown from radiofrequency plasmas of acetylene-argon mixtures, at different excitation powers, P. The effects of this parameter on the plasma potential, electron density, electron temperature, and plasma activity were investigated using a Langmuir probe. The mean electron temperature increased from about 0.5 to about 7.0 eV while the mean electron density decreased from about 1.2x10(9) to about 0.2x10(9) cm(-3) as P was increased from 25 to 150 W. Both the plasma potential and the plasma activity were found to increase with increasing P. Through actinometric optical emission spectrometry, the relative concentrations of CH, [CH], and H, [H], in the discharge were mapped as a function of the applied power. A rise in [H] and a fall in [CH] with increasing P were observed and are discussed in relation to the plasma characteristics and the subimplantation model. The optical properties of the films were calculated from ultraviolet-visible spectroscopic data; the surface resistivity was measured by the two-point probe method. The optical gap, E(G), and the surface resistivity, rho(s), fall with increasing P. E(G) and rho(s) are in the ranges of about 2.0-1.3 eV and 10(14)-10(16) Omega/square, respectively. The plasma power also influences the film self-bias, V(b), via a linear dependence, and the effect of V(b) on ion bombardment during growth is addressed together with variation in the relative densities of sp(2) and sp(3) bonds in the films as determined by Raman spectroscopy.

Treatment of PVC using an alternative low energy ion bombardment procedure

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Some orbital characteristics of lunar artificial satellites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of castor oil-based polyurethane membranes in rat bone-marrow cell culture

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of single nucleotide polymorphisms of CAPN1 and CAST genes on meat traits in Nellore beef cattle (Bos indicus) and in their crosses with Bos taurus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Viability and cell cycle analysis of equine fibroblasts cultured in vitro

This experiment aimed to study equine fibroblasts in culture analyzing and the cell cycle and viability of cells pre- and post-freezing. Skin fragments were obtained from 6 horses and cultured in DMEM high glucose + 10% FCS in 5% CO(2) until the beginning of confluence. Two passages were performed before freezing. Cells subjected to serum starvation (0.5% FCS) were analyzed for viability and cell cycle at 24, 48, 72, 96, 120, 144 and 168 h of culture. For the confluent groups, cells were analyzed at the moment they achieved confluence. Cellular viability was assisted with Hoescht 33342 and propidium iodide. The analysis of apoptosis/necrosis and cell cycle was performed using a flow cytometer (FACS Calibur BD(A (R))) after staining the cells with annexin V and propidium iodide. Both optical microscopy and flow cytometry confirmed that cellular viability was similar for serum starvation and confluent groups (average 84%). Similarly, both methods were efficient to synchronize the cell cycle before freezing. However, after thawing, serum starvation, for more than 24 h, was superior to culture for synchronizing cells in G0/G1 (69% x 90%). The results of this experiment indicate that equine fibroblasts can be efficiently cultured after thawing.

Histological analyses of thermal effect caused by 1.2 W diode laser irradiation at rat periodontal pockets

The aim of this in vivo study was to evaluate the thermal effects caused by 810 nm 1.2 W diode laser irradiation of periodontal tissues. Despite all data available concerning the laser application for periodontal treatment, one of the most relevant challenges is to prevent the harmful tissue heating induced by different clinical protocols. Periodontal pockets were induced at molars in 96 rats. Several irradiation powers under CW mode were investigated: 0, 400, 600, 800, 1000, 1200 mW. The pockets were irradiated using a 300 A mu m frontal illumination fiber. The animals were killed at 4 or 10 days after irradiation. The mandible was surgically removed and histologically processed. The histological sections stained with H/E demonstrated that irradiation parameters up to 1000 mW were thermally safe for the periodontal tissues. The sections stained with Brown & Brenn technique evidenced bacteria in the periodontal tissues. Consequently, the diode laser irradiation as a unique treatment was not capable to eliminate bacteria of the biofilm present in the pockets. According to the methodology used here, it was concluded that the thermal variation promoted by a diode laser can cause damage to periodontal tissues depending on the energy density used. The 1.2 W diode laser irradiation itself does not control the bacteria present in the biofilm of the periodontal pockets without mechanical action. The knowledge of proper high intensity laser parameters and methods of irradiation for periodontal protocols may prevent any undesirable thermal damage to the tissues.