959 resultados para cocoa plantation
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Exotic species are used to trigger facilitation in restoration plantings, but this positive effect may not be permanent and these species may have negative effects later on. Since such species can provide a marketable product (firewood), their harvest may represent an advantageous strategy to achieve both ecological and economic benefits. In this study, we looked at the effect of removal of a non-native tree species (Mimosa caesalpiniifolia) on the understory of a semideciduous forest undergoing restoration. We assessed two 14-year-old plantation systems (modified taungya agroforestry system; and mixed plantation using commercial timber and firewood tree species) established at two sites with contrasting soil properties in São Paulo state, Brazil. The experimental design included randomized blocks with split plots. The natural regeneration of woody species (height ≥0.2 m) was compared between managed (all M. caesalpiniifolia trees removed) and unmanaged plots during the first year after the intervention. The removal of M. caesalpiniifolia increased species diversity but decreased stand basal area. Nevertheless, the basal area loss was recovered after 1 year. The management treatment affected tree species regeneration differently between species groups. The results of this study suggest that removal of M. caesalpiniifolia benefited the understory and possibly accelerated the succession process. Further monitoring studies are needed to evaluate the longer term effects on stand structure and composition. The lack of negative effects of tree removal on the natural regeneration indicates that such interventions can be recommended, especially considering the expectations of economic revenues from tree harvesting in restoration plantings.
Resumo:
Pós-graduação em Agronomia - FEIS
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desevolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on condition. P. taeda L wood (43 years old trees) from Horto Florestal of Manduri (latitude 230 00’ south, longitude 400 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better ju regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, cons right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences between the velocity of stress waves at juvenile wood, mature wood and pith regions. Keywords: stress wave method, velocity 17 destrutivos de propagação da propagação de ondas de tensão em toras e madeira serrada de taeda L. Hernando Alfonso Lara Palma - Universidade Estadual Paulista Faculdade de Ciências Agronômicas – FCA/UNESP – Botucatu - SP, e-mail: awballarin@fca.unesp.br Luiz Antonio Vasques Hellmeister - Universidade Estadual Paulista - Faculdade de Arquitetura, FAAC/UNESP – Bauru - SP, e-mail: hellmeister@faac.unesp.br Este trabalho teve como objetivo analisar a influência do tipo de lenho, da posição da tora ao longo do fuste e das dimensões das peças desdobradas, na velocidade de as de tensão (Stress wave method), na condição de madeira verde. P. taeda L., originária de árvores de plantio do Horto Florestal de SP., com idade aproximada de 43 anos, pela facilidade de identificação dos anéis imento e demarcação das regiões de madeira adulta e madeira juvenil. Foram amostradas 6 árvores distintas, escolhidas ao acaso do talhão selecionado. De cada árvore foram retiradas 4 toras com comprimento de 2,5 m cada. Foram demarcadas nas toras a ha central (8 cm de espessura) e 4 tábuas laterais (espessura comercial de 2,5 cm), sendo duas à esquerda e duas à direita da prancha central. Foram avaliadas as relações existentes entre as velocidades de propagação das ondas de tensão na madeira íntegra (toras) e desdobrada (pranchas e tábuas), na condição de madeira verde, nas três regiões distintas do lenho: medula, madeira adulta e madeira juvenil. A análise comparativa dos resultados revelou a concordância entre as velocidades antes e após o desdobr madeira. Houve diferenciação estatisticamente significativa entre as velocidades de propagação das ondas de tensão nos lenhos adulto, juvenil e na medula. -destrutivos, método das ondas de tensão, Pinus taeda stress wave tests on green logs and lumber of Pinus taeda In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on L wood (43 years old trees) from Horto Florestal of Manduri (latitude 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better juvenile and mature wood regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, considering 2 boards on the left and 2 at the right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood, juvenile wood and pith). Comparative analyses of results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences ty of stress waves at juvenile wood, mature wood and pith regions
Resumo:
Pós-graduação em Ciência Florestal - FCA
Resumo:
The sugarcane is a crop of annual cycle, where its large water demand is not always full, causing stand gaps in the sprouting of ratoons. Thus, this study aimed to assess the stand gaps in the first and second ratoon sugarcane under seven levels of water deficit. The experiment was conducted in the Center of Agricultural Sciences of the Federal University of Alagoas in the period of 22 February 2010 to 20 February 2012. The stand gaps depending on water depths ranged from 11.2 (25% ETo) to 16.8% (100% ETo) in the first ratoon and from 24.8 (0% ETo) to 32.8% (100% ETo) on second ratoon. The average size of stand gaps ranged from 0.60 to 0.68 m in the first ratoon and from 0.70 to 0.74 m on second ratoon. The average distance to find a stand gap ranged from 16.8 to 29.5 m in the first ratoon and from 6.5 to 10.9 m in the second ratoon. The percentage of gaps and the average size of the gaps in the sprouting of ratoon increase with the age of the sugarcane plantation and the average distance between gaps decreases. The use of irrigation in the culture of sugarcane increase the percentage of gaps, but because these spaces are filled with culms of other sugarcane clumps and were irrigated with larger water depths, the agricultural productivity of the culture increases. The depths of irrigation decreases the average distance between gaps with more intensity in the first than in the second ratoon.
Resumo:
This study aimed to technically and economically evaluate the Forwarder performance in the first cutting wood extraction from a Eucalyptus grandis plantation. Technical analysis included a movement and timing study by continuous method, and the productivity was determined using the extracted wood volume in cubic meters. Economical analysis included operational costs parameters and wood extraction cost. Results referred to the effective operational performance. Loading and unloading activities responded for more than ¾ of the total time of effective Forwarder operational cycle. Operational costs were influenced by maintenance and repair costs. The estimated cost of extraction was US$ 0.97 per cubic meter.
Resumo:
Expansion of agricultural practice, cattle raising and forestry, in a disorderly way and no limits of land use, generates the degradation of natural resources such as soil, water and vegetation. That fact brings consequences, impacts the environment and the rural landscape. This study aimed to identify and quantify the land use in nine watersheds included in the watershed of Faxinal creek, located in western Botucatu, São Paulo State, Brazil, at 22º 51’ 35” and 22º 57’ 02” – Latitude S and 48º 39’ 42” and 48º 38’ 01” – Longitude W. The basin was subdivided into 9 subunits, being eight from second and one from third-order branch. The diagnosis of the subunits was carried out with geospatial technologies, in order to gather data on the use and occupation of the soil. Based on the obtained results, was concluded that the sub watersheds are occupied by the sum of areas of Citrus, horticulture, coffee plantation and small other occupations (25,81%), followed by reforestation (24,80%), as an isolated occupation element, has occupied the largest area.
Diagnóstico de conflitos em áreas de preservação permanente na bacia do Rio Capivara - Botucatu (SP)
Resumo:
The permanent preservation areas (PPA) established by Brazilian law are there to protect the natural environment. With the expansion of space occupied by man and development of economic activities in these areas were engaged in conflicts characterized PPA, where the use is other than the natural vegetation. According to these paradigms work aims to raise these conflict areas in the River Basin Capivara, Botucatu (SP) with the help of GIS Ilwis 3.4, topographic maps of IBGE and satellite images CBERS 2B. The map was generated from PPA in the GIS by distance calculation in relation to drainage, springs and break line on Cuesta de Botucatu. The classes of land use and natural vegetation were determined by interpretation of satellite images and field visits to check their veracity. With the cutting of the map of land use and natural vegetation in relation to PPA unit it was determined that the total 44,63% PPA is in conflict occupied by pasture, forest plantation, orange, annual crops, farms and irrigated rice project in lowland. This diagnostic characterizes the degradation of the environment and highlights the need to harmonize the economic and urban development with the preservation of the environment to ensure sustainability of the region.
Resumo:
The sunflower oleaginous is the fourth of recognized importance in the oil production and few studies related to agricultural operations adopted for this crop. The objective of the present work was to study the performance of agricultural machines in the conventional tillage and reduced in the plantation of the sunflower crop. The experiment was installed at the Experimental Farm of Lageado, belonging to the Faculty of Agricultural Sciences of UNESP, located in Botucatu-SP. It consisted of two types of tillage (conventional tillage-CC and reduced tillage-CR), with experimental design in randomized blocks and four replications. The treatment CC promoted less coverage of the soil surface protected with waste when compared to CR treatment. The chisel plow was the tillage of equipment that required the tractor higher average traction force, average power traction and slippage, consequently, promoted lower average speed of work. The theoretical field capacity and area of land involved in the treatment CR were superior when compared to treatment CC, thereby lower consumption of fuel per hour worked was lower in CR treatment.