968 resultados para cleaner shrimp
Resumo:
The objective of the present study was to evaluate the potential of a heterotrophic rearing media (microbial flocs) on the growth and survival of Farfantepenaeus paulensis reared in the nursery phase. For 30 days, F. paulensis post-larvae (0.019 ± 0.01g) were reared in nine 40-liter plastic tanks at the density of 500 post-larvae m -2. Three treatments with three replicates each were used: rearing in the presence of microbial flocs with ration supply (FLOC + R); rearing in the sole presence of flocs - no ration supplied (FLOC); and rearing in clear water plus with ration supply (AC + R). The presence of microbial flocs had no significant effect on growth and survival in the nursery rearing of F. paulensis.
Resumo:
Replacing glass fibers with natural fibers in the automobile industry can yield economic, environmental and social benefits. This article evaluates the prospective environmental impacts of automobile applications of curauá fiber (Ananas erectifolius), which nearly equates the physical properties of glass fibers. The study identified economic and social advantages of applying curauá fiber composites in car parts. Besides costing 50% less than fiber glass, the use of curauá fibers can promote regional development in the Amazon region. In order to realize significant environmental benefits, however, the curauá-based composites would have to be lighter than their glass fiber-based counterparts. © 2006 Elsevier Ltd. All rights reserved.
Resumo:
As the adaptation of titanium crowns obtained by Rematitan Plus investment, specific for titanium, is not recognized to be suitable, this study evaluated the effect of the concentration of the specific liquid and the temperature of the mold of investments on the internal misfit of crowns cast on commercially pure titanium. Individual dies of epoxy resin were obtained, representing teeth prepared for full-crown restoration with a 6-degree axial surface convergence angle and shoulder (1.0 mm). For the waxing of each crown, a ring-shaped stainless steel matrix (8.0mm internal diameter; 7.5 mm height) was adapted above the individual dies of epoxy resin. The Rematian Plus investment was mixed according to the manufacturer's instructions using two different concentrations of the specific liquid: 100%, 75%. Casting was performed in a Discovery Plasma Ar-arc vacuum-pressure casting machine with molds at temperatures of 430°C, 515°C and 600°C. The crowns were cleaned individually in a solution (1% HF + 13% HNO3) for 10 min using a ultrasonic cleaner, with no internal adaptations, and luted with zinc phosphate cement under a 5 kg static load. The crown and die assemblies were embedded in resin and sectioned longitudinally. The area occupied by cement was observed using stereoscopic lens (10X) and measured by the Leica Qwin image analysis system (mm2). The data for each experimental condition (n=8) were analyzed by Kruskal-Wallis non-parametric test (á=0.05). The results showed that liquid dilution and the increase in mold temperature did not significantly influence the levels of internal fit of the cast titanium crowns. The lowest means (±SD) of internal misfit were obtained for the 430°C/100%: (7.25 mm2 ±1.59) and 600°C/100% (8.8 mm2 ±2.25) groups, which presented statistically similar levels of internal misfit.
Resumo:
Candida species have frequently been isolated from the oral cavities of a variety of patients, such as elderly people, dentures users, immunocompromised and health patients. Yeasts may be associated with immune response and local factors such as poor oral hygiene. It was evaluated effectiveness of tongue cleaner showing which types would be preferred by patients, changes in tongue coating and in saliva yeasts counting. Thirty patients were selected and randomly distributed into three groups. This crossover blind study evaluated the effect of tongue cleaning using: a plastic and a steel tongue scraper and a nylon soft-bristle toothbrush. All patients were instructed to use the cleaners twice a day for one week (fifteen-day wash-out period). Saliva and tongue coating samples were collected from each patient from each test period, the yeasts were counted by colony forming units per mL (CFU/ mL) and the species were identified. The patients were questioned about cleaner preference. An increase in the percentage of patients with no tongue coating after scraping was observed. A reduction in the mean number of Candida species in tongue coating was observed only after nylon soft-bristle toothbrush cleaner. Candida albicans was the prevalent species. Volunteers preferred to the steel tongue scraper (60%). Tongue cleaners reduced the tongue coating and the mean number of saliva's yeasts. Degree of tongue coating favors the Candida species colonization.
Resumo:
The efficiency of systems composed of two species of floating aquatic macrophyte (Eichhornia crassipes and Pistia stratiotes) to treat effluents from shrimp culture was evaluated in this research. The effluent originated from a pond populated with Macrobrachium amazonicum. Treatment systems consisted of 12 experimental tanks with aquatic macrophyte and three tanks without plants (control). Water samples were collected from the fresh water supply and before and after passing through the treatment systems. There are no differences in the removal of nutrients between the two species. The higher nutrient removal was observed for total phosphorus (41.9% by control; 71.6% by E. crassipes; 69.9 by P. stratiotes; 72.5% by E. crassipes + P. stratiotes and 72.1 by P. stratiotes + E. crassipes) and turbidity (30.6% by control; 80.2% by E. crassipes; 75.2 by P. stratiotes; 79.8% by E. crassipes + P. stratiotes and 81.5 by P. stratiotes + E. crassipes). The systems containing aquatic macrophytes were efficient in nitrogen and phosphorus removal from M. amazonicum culture. © 2008 Sociedade Brasileira de Zootecnia.
Resumo:
The objective of this work was to evaluate the influence of fresh water shrimp Macrobrachium amazonicum (Heller, 1862) in performance of Nile tilapia (Oreochromis niloticus) cultivated in polyculture system and feeding with ration pelleted and mashed. The work was realized in Centro de Pesquisa em Aqüicultura Ambiental-CPAA/IAP - Toledo/PR during 37 days. Were utilized like experimental unit 16 ponds excavated, covered with concrete but with bottom of soil with dimension the 4 x 3 m and useful volume the 3,5 m 3. Were utilized 30 tilapias e 150 shrimps for experimental unit distributed at an entirely randomized design with 4 treatments and 4 replications, where TF: tilapia feeding with ration mashed; TCF: tilapia and shrimp feeding with ration mashed; TP: tilapia feeding with ration pelleted; TCP: tilapia and shrimp feeding with ration pelleted. The density used were the 2,6 fishes/m 2 with medium initial weight the 5,58 ± 0,10 g and initial length the 5,56 cm, and the density of shrimp was the 13 shrimps/m 2 with initial length the 1,04 cm. The temperature was gauged daily, while the variables dissolved oxygen, pH and electrical conductivity, weekly. The quantity of ration supplied was the 10% of total biomass of fishes, with feed frequency the 4 times a day, being corrected weekly in function of the biometry. During the experimental period the medium values of temperature, dissolved oxygen, pH and electrical conductivity of the ponds water were 23,42 ± 0,83°C, 5,32 ± 0,52 mg/L, 7,02 ± 0,39, e 100,96 ± 1,81 μS/ cm respectively. Won't registering any influence of shrimp during the cultivation and the ration pelleted provide the better conversion alimentary and performance of tilapias.
Resumo:
The phytochemical profile of ethanolic extract of Solanum lycocarpum fruits was analyzed and preliminary toxicity tests were performed against brine shrimp larvae. The extract was subjected to preliminary phytochemical analysis to identify the main classes of secondary metabolites and tested against the larvae of A. salina to obtain the median lethal concentrations (LC50%). The phytochemical tests showed the presence of phenols, tannins, saponins, alkaloids and free steroids. The extract was fractionated with various solvents for toxicity testing against the larvae and the hydroalcoholic fraction showed considerable cytotoxicity (CL50% = 285.546 g/mL).
Resumo:
Fish hydrolyzed (HP), poultry manure (CF), shrimp skin (CC), cattle manure (EB), sewage sludge (LE) and castorbean presscake (TM) were evaluated for their effect of aqueous extracts with and without autoclaving, on mycelial growth and conidial germination of Cylindrocladium spathiphylli. The effect of mixtures of residues with potting mixes and their volatile compounds were also evaluated on the mycelial growth of the pathogen. To evaluate the effect of HP in the suppressiveness to Cylindrocladium spathiphylli, HP was added in potting mix artificially infested, at concentrations of 0, 10, 20, 30, 40 and 50% of the volume of water required to reach the water retention capacity of the potting mix. The mixtures were incubated for 10 days and transferred to pots containing one plug of Spathiphyllum Opal per pot. In the experiments in vitro, aqueous extracts and mixtures containing HP showed the highest suppressiveness against the pathogen. In the Spathiphyllum growing, the suppressiveness occurred at concentrations higher than 20% of fish hidrolyzed.
Resumo:
ITO nanowires were synthesized by carbothermal reduction process, using a co-evaporation method, and have controlled size, shape, and chemical composition. The electrical measurements of nanowires showed they have a resistance of about 102 Ω. In order to produce nanocomposites films, nanowires were dispersed in toluene using an ultrasonic cleaner, so the PMMA polymer was added, and the system was kept under agitation up to obtain a clear suspension. The PMMA polymer was filled with 1, 2, 5 and 10% in weight of nanowires, and the films were done by tape casting. The results showed that the electrical resistance of nanocomposites changed by over 7 orders of magnitude by increasing the amount of filler, and using 5 wt% of filler the composite resistance decreased from 1010 Ω to about 104 Ω, which means that percolation threshold of wires occurred at this concentration. This is an interesting result once for nanocomposites filled with ITO nanoparticles is necessary about 18% in weight to obtain percolation. The addition of filler up to 10 wt% decreased the resistance of the composite to 103 Ω, which is a value close to the resistance of wires. The composites were also analyzed by transmission electron microscopy (TEM), and the TEM results are in agreement with the electrical ones about percolation of nanowires. These results are promising once indicates that is possible to produce conductive and transparent in the visible range films by the addition of ITO nanowires in a polymeric matrix using a simple route. © 2011 Materials Research Society.
Resumo:
The growing concern for renewable and cleaner energy sources has increased the demand for biofuels, pointing out the ethanol from sugarcane. The aim of this study was quantify the partition of energy balance components and monitor the physiological development indexes of the sugarcane, relating them to water availability conditions of climate and soil in Campos dos Goytacazes, Norte Fluminense, Brazil. To this end, a micrometeorological station was settled in an area of 13 ha in commercial cultivation. The culture was regularly monitored at 85, 102, 128, 149, 174, 194, 215, 235, 255 and 280 days after cutting (DAC). The variations in water availability directly influenced the rates of crop growth and energy balance. Under the conditions studied most of the available energy (53%) was consumed by the latent heat flux.
Resumo:
This paper presents a power system capacity expansion planning modelconsidering carbon emissions constraints. In addition to the traditionaltechnical and economical issues usually considered in the planning process, two environmental policies that consist on the taxation and the annual limitsof carbon dioxide (CO 2) emissions are considered. Furthermore, the gradualretirement of old inefficient generation plants has been included. The approachguarantees a cleaner electricity production in the expanded power system ata relatively low cost. The proposed model considers the transmission systemand is applied to a 4-region and 11-region power systems over a 20-yearplanning horizon. Results show practical investment decisions in terms of sustainability and costs.
Resumo:
The objective of this study was to investigate morphological variation in traits of systematic relevance and the phylogenetic position, ecology, and reproductive biology of the shrimp Lysmata rauli Laubenheimer and Rhyne, 2010 (Caridea: Hippolytidae), described based only on a single specimen collected in Salvador, Bahia, Brazil. We analyzed a total of 89 specimens from Camamu Bay, Bahia (n = 88) and from S3o Vicente estuary, São Paulo (n = 1). Considerable morphological variation was detected in the rostral spine series, number of segments on the carpus and merus of pereiopod 2, number of spiniform setae on the ventrolateral margin of merus and on the ventral margin of propodus of pereiopods 3-5. Importantly, L rauli can be distinguished neither using morphology, nor coloration from the Indo-Pacific L. vittata (Stimpson, 1860). Furthermore, molecular phylogenetic analyses (using the 16S mt DNA fragment) did not reveal any considerable genetic dissimilarities between L rauli and L vittata. Thus, our results clearly indicate that L rauli is not a new species but a junior synonym of L vittata. The high density observed within the structures of oyster farming indicates that the invasive L vittata lives in crowds in Brazil. The studied population was composed of males, hermaphrodites, and transitional individuals (having characteristics of males and hermaphrodites). The above information suggests that L rauli is a protandric simultaneous hermaphrodite, as it has been observed in all species of Lysmata that have been investigated. Lysmata vittata has invaded the southwestern Atlantic and is present in Bahia, Rio de Janeiro and S3o Paulo, Brazil. © The Crustacean Society, 2013. Published by Brill NV, Leiden.
Resumo:
The objective of this research is to verify the adherence between the sustainable activities of an Indian university and the variables recommended by Alshuwaikhat and Abubakar (2008) in a framework that analyzed the contributions made by Higher Education Institutions for Sustainable Development. For such, a field work was conducted in India by the first author of this article to get in-depth data about sustainability at the university analyzed. Besides direct observations and gathering documents, interviews were also conducted with professors/scholars, students and employees. It was ascertained that up to the time in which the research was performed, the university studied was not fully adhering to the framework recommended by Alshuwaikhat and Abubakar (2008). Thus, there are still several opportunities for the university studied to be more sustainable. © 2013 Elsevier Ltd. All rights reserved.
Resumo:
The objective of this paper is to identify the main definitions, related practices and to point out future directions in green supply chain management (GSCM). After a literature review and systematisation of the published articles in this field, it was possible to identify: a) the main research objectives of analysed papers; b) the research methods adopted; c) the predominantly analysed industrial sectors; d) the GSCM practices considered by the researchers. Results are presented in each of these analytical perspectives. The main findings are: 1) there are various classifications, nomenclatures and types of GSCM practices, but the most commonly used by studies in GSCM are cleaner production, product design, reverse logistic and green purchasing; 2) from the highlighted definitions, the tonic is to adapt operating activities and incorporate the supply chain management philosophy (integration/ collaboration) to environmental concerns (impact reduction) in relations between links in the chain. These results can be useful for those interested in environmental management as well as supply chain management, considering the growing interest in GSCM. We also propose a research agenda on this subject. This is one of the most recent literature review and systematisation on green supply chain management. © 2013 Inderscience Enterprises Ltd.
Resumo:
Some dynamical properties for a bouncing ball model are studied. We show that when dissipation is introduced the structure of the phase space is changed and attractors appear. Increasing the amount of dissipation, the edges of the basins of attraction of an attracting fixed point touch the chaotic attractor. Consequently the chaotic attractor and its basin of attraction are destroyed given place to a transient described by a power law with exponent -2. The parameter-space is also studied and we show that it presents a rich structure with infinite self-similar structures of shrimp-shape. © 2013 Elsevier B.V. All rights reserved.