Development of a system to monitor surfer’s balance and plantar pressure and surfboard’s movement

O uso da tecnologia tem crescido nas últimas décadas nas mais diversas áreas, seja na indústria ou no dia-a-dia, e é cada vez mais evidente os benefícios que traz. No desporto não é diferente. Cada dia surgem novos desenvolvimentos objetivando a melhoria do desempenho dos praticantes de atividades físicas, possibilitando atingir resultados nunca antes pensados. Além disto, a utilização da tecnologia no desporto permite a obtenção de dados biomecânicos que podem ser utilizados tanto no treinamento quando na melhoria da qualidade de vida dos atletas auxiliando na prevenção de lesões, por exemplo. Deste modo, o presente projeto se aplica na área do desporto, nomeadamente, na modalidade do surfe, onde a ausência de trabalhos científicos ainda é elevada, aliando a tecnologia eletrônica ao desporto para quantificar informações até então desconhecidas. Três fatores básicos de desempenho foram levantados, sendo eles: equilíbrio, posicionamento dos pés e movimentação da prancha de surfe. Estes fatores levaram ao desenvolvimento de um sistema capaz de medi-los dinamicamente através da medição das forças plantares e da rotação da prancha de surfe. Além da medição dos fatores, o sistema é capaz de armazenar os dados adquiridos localmente através de um cartão de memória, para posterior análise; e também enviá-los através de uma comunicação sem fio, permitindo a visualização do centro de pressões plantares; dos ângulos de rotação da prancha de surfe; e da ativação dos sensores; em tempo real. O dispositivo consiste em um sistema eletrônico embarcado composto por um microcontrolador ATMEGA1280; um circuito de aquisição e condicionamento de sinal analógico; uma central inercial; um módulo de comunicação sem fio RN131; e um conjunto de sensores de força Flexiforce. O firmware embarcado foi desenvolvido em linguagem C. O software Matlab foi utilizado para receção de dados e visualização em tempo real. Os testes realizados demostraram que o funcionamento do sistema atende aos requisitos propostos, fornecendo informação acerca do equilíbrio, através do centro de pressões; do posicionamento dos pés, através da distribuição das pressões plantares; e do movimento da prancha nos eixos pitch e roll, através da central inercial. O erro médio de medição de força verificado foi de -0.0012 ± 0.0064 N, enquanto a mínima distância alcançada na transmissão sem fios foi de 100 m. A potência medida do sistema foi de 330 mW.

The impact of global forces on the individual: empirical evidence from the German clothing industry

Starting from theoretical perspectives on globalisation, the following article analyses how current working conditions are affected by globalisation processes. For this purpose, recent developments in the German clothing sector are traced back to the power of economic globalisation processes. Characterising the German clothing sector as pioneer in economic globalisation, we use empirical findings to illustrate how current processes of globalisation influence the work place: At organisational level, corporate strategies aim at rationalisation, standardisation and flexibilisation of work in order to response to the economic pressure of global markets. At individual level these strategies, in turn, speed up working processes and intensify working processes for the employees. Although these developments form strong trends, we conclude that the local embeddedness of companies is still of high importance with regard to organisational and individual consequences of globalisation.

Gold nanoparticle to antibody conjugates for diagnosis applications: molecular interactions and immunoassay development

Thesis for the Master degree in Structural and Functional Biochemistry

The effect of water inorganic matrix in ibuprofen adsorption onto activated carbon for water and wastewater treatment

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Contamination of public parks and squares from Guarulhos (São Paulo State, Brazil ) by Toxocara spp. and Ancylostoma spp.

The contaminated soil with mammal feces is an important factor of risk to infection with zoonotic diseases. Amongst these zoonoses are visceral larva migrans and cutaneous larva migrans caused by Toxocara spp. and Ancylostoma spp., respectively. The aim of this study was to assess the environmental contamination by Toxocara spp. eggs and hookworms (Ancylostoma spp.) in public parks and squares in the city of Guarulhos, a metropolitan area of São Paulo, São Paulo State, Brazil. Soil samples were collected, between September and December 2010, and examined using the centrifugal flotation technique with sodium dichromate and zinc sulphate as well as the modified Baermann method. Notably, 35 (74.5%) of the 47 districts surveyed in Guarulhos possessed samples contaminated with Toxocara spp. and/or eggs or larvae of Ancylostoma spp. The frequency of Toxocara spp. and Ancylostoma spp. in the samples from public areas was 68.1% and 46.8%, respectively. Overall, the eastern side of Guarulhos is the region with the highest occurrence of causative agents of larva migrans. In all collection sites, the presence of feces from dogs and cats accompanied by their owners and stray animals were observed. Notably, it is important to adopt measures to control dog and cat breeding, to treat infected animals, and provide health education to the population.

Politics, Commerce, and Colonization in Angola at the Turn of the Eighteenth Century

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em História Moderna e dos Descobrimentos

Italian interlocking directorates: structure, evolution and cross-country comparisons

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Analysis of the progress of lifelong learning strategies of Portuguese Economics and Management Schools

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Strategy definition of a new business opportunity in mobile-casual gaming: Partnership between Nmusic and Rovio Entertainment Ltd.

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Bits, Atoms, and Information Sharing: new opportunities for participation

The particular characteristics and affordances of technologies play a significant role in human experience by defining the realm of possibilities available to individuals and societies. Some technological configurations, such as the Internet, facilitate peer-to-peer communication and participatory behaviors. Others, like television broadcasting, tend to encourage centralization of creative processes and unidirectional communication. In other instances still, the affordances of technologies can be further constrained by social practices. That is the case, for example, of radio which, although technically allowing peer-to-peer communication, has effectively been converted into a broadcast medium through the legislation of the airwaves. How technologies acquire particular properties, meanings and uses, and who is involved in those decisions are the broader questions explored here. Although a long line of thought maintains that technologies evolve according to the logic of scientific rationality, recent studies demonstrated that technologies are, in fact, primarily shaped by social forces in specific historical contexts. In this view, adopted here, there is no one best way to design a technological artifact or system; the selection between alternative designs—which determine the affordances of each technology—is made by social actors according to their particular values, assumptions and goals. Thus, the arrangement of technical elements in any technological artifact is configured to conform to the views and interests of those involved in its development. Understanding how technologies assume particular shapes, who is involved in these decisions and how, in turn, they propitiate particular behaviors and modes of organization but not others, requires understanding the contexts in which they are developed. It is argued here that, throughout the last century, two distinct approaches to the development and dissemination of technologies have coexisted. In each of these models, based on fundamentally different ethoi, technologies are developed through different processes and by different participants—and therefore tend to assume different shapes and offer different possibilities. In the first of these approaches, the dominant model in Western societies, technologies are typically developed by firms, manufactured in large factories, and subsequently disseminated to the rest of the population for consumption. In this centralized model, the role of users is limited to selecting from the alternatives presented by professional producers. Thus, according to this approach, the technologies that are now so deeply woven into human experience, are primarily shaped by a relatively small number of producers. In recent years, however, a group of three interconnected interest groups—the makers, hackerspaces, and open source hardware communities—have increasingly challenged this dominant model by enacting an alternative approach in which technologies are both individually transformed and collectively shaped. Through a in-depth analysis of these phenomena, their practices and ethos, it is argued here that the distributed approach practiced by these communities offers a practical path towards a democratization of the technosphere by: 1) demystifying technologies, 2) providing the public with the tools and knowledge necessary to understand and shape technologies, and 3) encouraging citizen participation in the development of technologies.

Indoor location-based analytics systems: Portuguese market compettive assessment and entry procing strategy of BIPs' technology in Sonae Sierra Shopping malls stores

This project attempts to provide an in-depth competitive assessment of the Portuguese indoor location-based analytics market, and to elaborate an entry-pricing strategy for Business Intelligence Positioning System (BIPS) implementation in Portuguese shopping centre stores. The role of industry forces and company’s organizational resources platform to sustain company’s competitive advantage was explored. A customer value-based pricing approach was adopted to assess BIPS value to retailers and maximize Sonae Sierra profitability. The exploratory quantitative research found that there is a market opportunity to explore every store area types with tailored proposals, and to set higher-than-tested membership fees to allow a rapid ROI, concluding there are propitious conditions for Sierra to succeed in BIPS store’s business model in Portugal.

Potential M&A between TIM Brazil and Oi S.A: The irreversible force of Telecommunications convergence

The intrinsic forces of market aiming for telecom industry convergence has arrived to Brazil. This case presents real characters, a sequence of events and other public information that has been impacting two corporations studied in this case. TIM Brazil and Oi S.A, two top players in the Brazilian telecom industry mobile and fixed segment respectively. While a merge between the two of them looks perfect and simple in an operational perspective due to its vertical complementarity, bring to them opportunities to win over a bundle offer (multi service package) that will consolidate their market predominance. Macroeconomic and internal corporate contrasts between these companies’ environment might signal that an impulsive could have a high price to pay in the future.

Mental health and neuroscience. A perspective from the magazine market

Mental health awareness has been rising worldwide, motivated by its social and economic costs. Despite the investment in research in neuroscience in the recent years, little is known about the underlying mechanisms in the brain that are correlated with psychiatric conditions. This project, through two feature articles suitable to be published in magazines, provides perspectives onto mental health research. First it presents an example where psychiatry joins forces with neuroscience and computer science in an interdisciplinary effort to improve the life of those affected by mental disorders. The second article gathers opinions which claim that mental health research priorities should be set by patients themselves, or even that people with lived experience of mental health issues should have an active role in that research. This project was planned and researched while I was an Erasmus student at Nottingham Trent University, in the United Kingdom.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

Isokinetic dynamometry of knee flexors and extensors: comparative study among non-athletes, jumper athletes and runner athletes

Participation in intensive sports activities leads to muscular specializations that may generate alterations in involved articular forces and cause static (posture) and dynamic changes (alterations of articular stability, coordination, etc.). Prevention of injury requires specific functional muscular evaluation in all athletes and for any kind of sport. OBJECTIVE: To dynamically evaluate, through isokinetic tests, the peak torque, total work, and average power of the knee flexor and extensor muscles of jumper and runner athletes and compare them to those of a non-athletic population, evaluating dominance and balance between agonistic and antagonistic muscle groups. RESULTS: In the non-athlete group, we noted a higher asymmetry between the dominant and nondominant members. The jumpers had the highest values of the evaluated parameters of all groups, whereas parameters for the runners were intermediate between non-athletes and jumpers.