965 resultados para built-up edge


Relevância:

80.00% 80.00%

Publicador:

Resumo:

This work is concerned with the behaviour of thin webbed rolled steel joists or universal beams when they are subjected to concentrated loads applied to the flanges. The prime concern is the effect of high direct stresses causing web failure in a small region of the beam. The review shows that although many tests have been carried out on rolled steel beams and built up girders, no series of tests has restricted the number of variables involved to enable firm conclusions to be drawn. The results of 100 tests on several different rolled steel universal beam sections having various types of loading conditions are presented. The majority of the beams are tested by loading with two opposite loads, thus eliminating the effects of bending and shear, except for a small number of beams which are tested simply supported on varying spans. The test results are first compared with the present design standard (BS 449) and it is shown that the British Standard is very conservative for most of the loading conditions included in the tests but is unsafe for others. Three possible failure modes are then considered, overall elastic buckling of the web, flexural yielding of the web due to large out of plane deflexions and local crushing of the material at the junction of the web and the root fillets. Each mode is considered theoretically and developed to establish the main variables, thus enabling a comparison to be made with the test results. It is shown that all three failure modes have a particular relevance for individual loading conditions, but that determining the failure load given the beam size and the loading conditions is very difficult in certain instances. Finally it is shown that there are some empirical relationships between the failure loads and the type of loading for various beam serial sizes.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The research work described in this thesis is concerned with the development of glassfibre reinforced plastics for structural uses in Civil Engineering construction. The first stage was primarily concerned with the design of GRP lamintes with structura1 properties and method of manufacture suitable for use with relatively large structural components. A cold setting, pressure moulding technique was developed which proved to be efficient in reducing the void content in the composite and minimising the exothermic effect due to curing. The effect of fibre content and fibre arrangement on strength and stiffness of the cornposite was studied and the maximum amount of' fibre content that could be reached by the adopted type of moulding technique was determined. The second stage of the project was concerned with the introduction of steel-wire "sheets" into the GRP cornposites, to take advantage of the high modulus of steel wire to improve the GRP stiffness and to reduce deformation. The experimental observations agreed reasonably well with theoretical predictions in both first and second stages of the work. The third stage was concerned with studying the stability of GRP flat rectangular plates subjected to uniaxial compression or pure shear, to simulate compression flanges or shear webs respectively. The investigation was concentrated on the effect of fibre arrangement in the plate on buckling load. The effect of the introduction of steel-wire sheets on the plate stability in compression was also investigated. The boundary conditions were chosen to be close to those usually assumed in built-up box-sections for both compression flanges and webs. The orthotropic plate and the mid-plane symmetric were used successfully in predicting the buckling load theoretically. In determining the buckling load experimentally, two methods were used. The Southwell plot method and electrical strain gauge method. The latter proved to be more reliable in predicting the buckling load than the former, especially for plates under uniaxial compression. Sample design charts for GRP plates that yield and buckle simultaneously under compression are also presented in the thesis. The final stage of the work dealt with the design and test of GRP beams. The investigation began by finding the optimum cross-section for a GRP beam. The cross-section which was developed was a thin walled corrugated section which showed higher stiffness than other cross-sections for the same cross-sectional area (i.e. box, I, and rectangular sections). A cold setting, hand layings technique was used in manufacturing these beams wbich were of nine types depending on the type of glass reinforcement employed and the arrangement of layers in the beam. The simple bending theory was used in the beam design and proved to be satisfactory in predicting the stresses and deflections. A factor of safety of 4 was chosen for design purposes and considered to be suitable for long term use under static load. Because of its relatively low modulus, GRP beams allowable deflection was limited to 1/120th of the span which was found to be adequate for design purposes. A general discussion of the behaviour of GRP composites and their place relative to the more conventional structural material was also presented in the thesis.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This exploratory study is concerned with the integrated appraisal of multi-storey dwelling blocks which incorporate large concrete panel systems (LPS). The first step was to look at U.K. multi-storey dwelling stock in general, and under the management of Birmingham City Council in particular. The information has been taken from the databases of three departments in the City of Birmingham, and rearranged in a new database using a suite of PC software called `PROXIMA' for clarity and analysis. One hundred of their stock were built large concrete panel system. Thirteen LPS blocks were chosen for the purpose of this study as case-studies depending mainly on the height and age factors of the block. A new integrated appraisal technique has been created for the LPS dwelling blocks, which takes into account the most physical and social factors affecting the condition and acceptability of these blocks. This appraisal technique is built up in a hierarchical form moving from the general approach to particular elements (a tree model). It comprises two main approaches; physical and social. In the physical approach, the building is viewed as a series of manageable elements and sub-elements to cover every single physical or environmental factor of the block, in which the condition of the block is analysed. A quality score system has been developed which depends mainly on the qualitative and quantitative conditions of each category in the appraisal tree model, and leads to physical ranking order of the study blocks. In the social appraisal approach, the residents' satisfaction and attitude toward their multi-storey dwelling block was analysed in relation to: a. biographical and housing related characteristics; and b. social, physical and environmental factors associated with this sort of dwelling, block and estate in general.The random sample consisted of 268 residents living in the 13 case study blocks. Data collected was analysed using frequency counts, percentages, means, standard deviations, Kendall's tue, r-correlation coefficients, t-test, analysis of variance (ANOVA) and multiple regression analysis. The analysis showed a marginally positive satisfaction and attitude towards living in the block. The five most significant factors associated with the residents' satisfaction and attitude in descending order were: the estate, in general; the service categories in the block, including heating system and lift services; vandalism; the neighbours; and the security system of the block. An important attribute of this method, is that it is relatively inexpensive to implement, especially when compared to alternatives adopted by some local authorities and the BRE. It is designed to save time, money and effort, to aid decision making, and to provide ranked priority to the multi-storey dwelling stock, in addition to many other advantages. A series of solution options to the problems of the block was sought for selection and testing before implementation. The traditional solutions have usually resulted in either demolition or costly physical maintenance and social improvement of the blocks. However, a new solution has now emerged, which is particularly suited to structurally sound units. The solution of `re-cycling' might incorporate the reuse of an entire block or part of it, by removing panels, slabs and so forth from the upper floors in order to reconstruct them as low-rise accommodations.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This thesis describes the stratigraphy, sedimentology and diagenesis of the Pendleside Limestone (Asbian age), a sequence of limestones, shales and dolostones in the Clitheroe area of N. W. England. Field study of 19 measured sections indicates that it was deposited in a rhythmically subsiding basin (Craven Basin) because of movements on the Mid-Craven Fault which was active in Dinantian times. The sequence is up to 190m thick and consists mostly of distal turbidite deposits which have been reworked at horizons when sediment accumulation built up to the wave base. The original depositional fabric and mineralogy of the Pendleside Limestone Group has been extensively modified by diagenetic processes including cementation, authi­genesis, dolomitization and silicification. These processes have been studied using a wide variety of laboratory techniques. The carbonate cements of the PendIeside Limestone consist predominantly of ferroan calcite and non-ferroan calcite with microdolomite incIusions. The former is probably a stable replacement of original-high-magnesian calcite. Cementation was accompanied by the formation of authigenic albite and quartz. Much of the upper part of the Pendleside Limestone has been extensively dolomitized and chertified. Several distinct zones of dolomitization are found which increase in thickness and intensity towards the top of the Pendleside Limestone Group. The dolostone horizons correspond to coarser-grained lithologies deposited during periods of shallow water sedimentation. The composition of the dolomites changes from ferroan dolomite in the lower part of the Group to non-ferroan dolomite in the upper part. The low strontium and sodium content of the dolostones in association with the other evidence suggests that the dolomitization was brought about in an open system by the mixing of marine and fresh water in phreatic lens which were established at periodic intervals. The dolomitization was closely associated with chertification although this was initiated by the dissolution of siliceous spicules which provided the necessary source of silica.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Non-uniform B-spline dictionaries on a compact interval are discussed in the context of sparse signal representation. For each given partition, dictionaries of B-spline functions for the corresponding spline space are built up by dividing the partition into subpartitions and joining together the bases for the concomitant subspaces. The resulting slightly redundant dictionaries are composed of B-spline functions of broader support than those corresponding to the B-spline basis for the identical space. Such dictionaries are meant to assist in the construction of adaptive sparse signal representation through a combination of stepwise optimal greedy techniques.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The paper is a contribution to the theory of branching processes with discrete time and a general phase space in the sense of [2]. We characterize the class of regular, i.e. in a sense sufficiently random, branching processes (Φk) k∈Z by almost sure properties of their realizations without making any assumptions about stationarity or existence of moments. This enables us to classify the clans of (Φk) into the regular part and the completely non-regular part. It turns out that the completely non-regular branching processes are built up from single-line processes, whereas the regular ones are mixtures of left-tail trivial processes with a Poisson family structure.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The Arnamagnæan Institute, principally in the form of the present writer, has been involved in a number of projects to do with the digitisation, electronic description and text-encoding of medieval manuscripts. Several of these projects were dealt with in a previous article 'The view from the North: Some Scandinavian digitisation projects', NCD review, 4 (2004), pp. 22-30. This paper looks in some depth at two others, MASTER and CHLT. The Arnamagnæan Institute is a teaching and research institute within the Faculty of Humanities at the University of Copenhagen. It is named after the Icelandic scholar and antiquarian Árni Magnússon (1663-1730), secretary of the Royal Danish Archives and Professor of Danish Antiquities at the University of Copenhagen, who in the course of his lifetime built up what is arguably the single most important collection of early Scandinavian manuscripts in the world, some 2,500 manuscript items, the earliest dating from the 12th century. The majority of these are from Iceland, but the collection also contains important Norwegian, Danish and Swedish manuscripts, along with approximately 100 manuscripts of continental provenance. In addition to the manuscripts proper, there are collections of original charters and apographa: 776 Norwegian (including Faroese, Shetlandic and Orcadian) charters and 2895 copies, 1571 Danish charters and 1372 copies, and 1345 Icelandic charters and 5942 copies. When he died in 1730, Árni Magnússon bequeathed his collection to the University of Copenhagen. The original collection has subsequently been augmented through individual purchases and gifts and the acquisition of a number of smaller collections, bringing the total to nearly 3000 manuscript items, which, with the charters and apographa, comprise over half a million pages.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Full text: The title of the book gives us a major clue on the innovative approach developed by Anne Freadman in her analysis of a particular Colette corpus, the one devoted to auto-biographical writing: Les Vrilles de la vigne, Mes apprentissages, La Maison de Claudine, Sido ,L’E ́toile Vesper and Le Fanal bleu. Freadman follows the powerful lure of Rimbaldianvieilles vieilleries and its echoes with Colette’s fondness for collecting objects, people and memories. To this must be added a technical aspect, that of the study of the genre of Colette’s writing. Freadman argues that, by largely avoiding the autobiographical form, the writer achieves a new way of ‘telling time’, collecting anecdotes and detail taken from the quotidian and setting them within an all-encompassing preoccupation with time. This provides the second part of the title.The sonata form directs the sequence of the book, orchestrated into five parts,from ‘exposition’ to ‘first subject’ to‘bridge’ to ‘second subject’ to ‘recapitulation’. This has the advantage of enabling Freadman to move and progress between distinct themes—autobiography first,then alternative forms—with grace,whilst preserving within her own writing what she sees as the essence of Colette’s relationship to time in her ‘Livres-Souvenirs’, the telling of time. This‘telling of time’ is itself therefore cleverly subjected to the time constraints and freedoms of musical composition. Freadman’s ‘Exposition’ takes us through a discussion of the autobiographical genre, analysing the texts against anumber of theorists, from Lejeune to Benjamin and Ricoeur, before launching into ‘Colette and Autobiography’. It argues pertinently that Colette did not write a ‘sustained’ autobiography, even inthe most autobiographical of her writings, Mes apprentissages. Measured against Goodwin’s three sources for autobiography, confession, apologia and memoirs, Colette’s autobiographical writings appear to be at odds with all of them. Freadman then goes on in Part II of her argument, to persuasively uncover a project that rejects self-scrutiny and with no autobiographical strategy. In ‘Collecting Time’, despite claims of continuity, narrative logic and causality areabandoned in favour of a collection offragments, family stories that are built up generation after generation into familylegends. A close and fruitful analysis of Sidoleads us to a study of ‘The Art of Ending’, concentrating on L’E ́toile Vesperandle Fanal Bleu. The closing chapter gives a fascinating reading of La Naissance du jouras an exemplar of the way in which the two subjects developed in Freadman’s volume are cast together:Colette’s own working through the autobiographical genre, and her refusal to write memoirs, in favour of collecting memories, and the strategies she uses for her purpose. In ‘Recapitulation’, her concluding chapter, Freadman adroitlyen capsulates her analysis in a fetching title: ‘Fables of Time’. Indeed, the wholepremise of her book is to move away from autobiographical genre, having acknowledged the links and debt the corpus owes to it, and into a study of the multiple and fruitful ways in which Colette tells time.The rich and varied readings of thematerial, competently informed by theoretical input, together with acute sensitivity to the corpus, mark out this study as incontournable for Colette scholars.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

From 1889 to 1934, Florida's nurses belonging to a new group of professional women ushered in a pioneering phase of public health nursing in Florida. During this era, the nurses' ability to confront health and professional issues varied a great deal but in quiet and forceful ways they tackled cultural and environmental problems to assist people who were ill or help prevent people from becoming ill. This dissertation places the development of professional public health nursing in its social context by uncovering the relationships public health nurses formed with clubwomen, the medical profession, city leaders, midwives, and others. In 1888, there were few graduate nurses in the state, no state board of health and no organized nursing service to respond to Jacksonville's great yellow fever epidemic. By 1934, national and state leaders of public health nursing had built up the profession to become an essential part of the State Board of Health's service to the community. Between these milestones, in the era of white supremacy and Jim Crow, public health nurses combined their professional training with a pioneer spirit of innovation and risk-taking. In the predominately rural state, the public health nurses' resolve to overcome environmental hazards and cultural obstacles stands out as they attempted to reach those who were unserved or underserved by modern medicine.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Movement strategies of small forage fish (<8 cm total length) between temporary and permanent wetland habitats affect their overall population growth and biomass concentrations, i.e., availability to predators. These fish are often the key energy link between primary producers and top predators, such as wading birds, which require high concentrations of stranded fish in accessible depths. Expansion and contraction of seasonal wetlands induce a sequential alternation between rapid biomass growth and concentration, creating the conditions for local stranding of small fish as they move in response to varying water levels. To better understand how landscape topography, hydrology, and fish behavior interact to create high densities of stranded fish, we first simulated population dynamics of small fish, within a dynamic food web, with different traits for movement strategy and growth rate, across an artificial, spatially explicit, heterogeneous, two-dimensional marsh slough landscape, using hydrologic variability as the driver for movement. Model output showed that fish with the highest tendency to invade newly flooded marsh areas built up the largest populations over long time periods with stable hydrologic patterns. A higher probability to become stranded had negative effects on long-term population size, and offset the contribution of that species to stranded biomass. The model was next applied to the topography of a 10 km × 10 km area of Everglades landscape. The details of the topography were highly important in channeling fish movements and creating spatiotemporal patterns of fish movement and stranding. This output provides data that can be compared in the future with observed locations of fish biomass concentrations, or such surrogates as phosphorus ‘hotspots’ in the marsh.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This dissertation considered the development of two papers, both related to mortality in Brazil. In the first article, "The context of mortality according to the three broad groups of causes of death in Brazilian capitals, 2000 and 2010", the objective was to analyze the mortality rate according to the three major groups of causes of death in Brazilian capitals. In the second article, "Typology and characteristics of mortality from external causes in the municipalities in the Northeast of Brazil, 2000 and 2010", it was built up a typology for the Northeastern municipalities taking into account information on mortality from external causes and a set of indicators related to socioeconomic, demographic, and infrastructure aspects of such municipalities, both articles for the years 2000 and 2010. Thus, we used data from the Mortality Information System of the Ministry of Health. Furthermore, it was used information from the Demographic Census for those years. The variables relating to socioeconomic and demographic conditions used in this study were those available on the home page of the United Nations Program for Development. The variables relating to socioeconomic and demographic conditions used in this study were those available on the home page of the United Nations Program for Development. Was used in Article 1 the pro-rata distribution method to accomplish the redistribution of ill-defined causes. Moreover, made use of the technique of cluster analysis with the aim of grouping the capital that had proportions of deaths from ill-defined causes similar to each other. Already in Section 2, we used the technique of Empirical Bayesian estimation; spatial statistics technique; and finally, the Grade of Membership method to find types of municipalities from information on mortality from external causes associated with socioeconomic, demographic and infrastructure variables. As the main results, it stands out in Article 1, in relation to data quality, we observed the formation of four groups of similar capital between themselves, as the proportion of illdefined causes. Regarding the behavior of mortality, according to the three major groups of causes of death, it was noted both for 2000 and for 2010 the prevalence of deaths from noncommunicable diseases for both sexes, although the reduction was identified rates in some of the capitals. Communicable diseases stood out as the second cause of death among women. Also, we found that deaths due to external causes are responsible for the second cause of death among men, as well as presenting an increase among women. As for the Article 2, stands out, in general, not just an extension of mortality from external causes in the municipalities, as well as an enlargement of the configurator stain existence of external cause deaths for the whole area of Northeast. Regarding the typology of municipalities, three vi extreme profiles were buit: the profile 1, which comprises municipalities with high rates of mortality from external causes and the best social indicators; the profile 2, that was composed of municipalities that are characterized by having low mortality rates from external causes and the lowest social indicators; and the profile 3, that brings together municipalities with intermediate mortality rates and median values considered in relation to social indicators. Although we have not seen changes in the characteristics of the profiles, we observed an increase in the proportion of municipalities that belong to the extreme profile 3, taking into account the mixed profiles.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Obscured AGN are a crucial ingredient to understand the full growth history of super massive black holes and the coevolution with their host galaxies, since they constitute the bulk of the BH accretion. In the distant Universe, many of them are hosted by submillimeter galaxies (SMGs), characterized by a high production of stars and a very fast consumption of gas. Therefore, the analysis of this class of objects is fundamental to investigate the role of the ISM in the early coevolution of galaxies and black holes. We present a multiwavelength study of a sample of six obscured X-ray selected AGN at z>2.5 in the CDF-S, detected in the far-IR/submm bands. We performed the X-ray spectral analysis based on the 7Ms Chandra dataset, which provides the best X-ray spectral information currently available for distant AGN. We were able to place constraints on the obscuring column densities and the intrinsic luminosities of our targets. Moreover, we built up the UV to FIR spectral energy distributions (SEDs) by combining the broad-band photometry from CANDELS and the Herschel catalogs, and analyzed them by means of an SED decomposition technique. Therefore, we derived important physical parameters of both the host galaxy and the AGN. In addition, we obtained, through an empirical calibration, the gas mass in the host galaxy and assessed the galaxy sizes in order to estimate the column density associated with the host ISM. The comparison of the ISM column densities with the values measured from the X-ray spectral analysis pointed out that the contribution of the host ISM to the obscuration of the AGN emission can be substantial, ranging from ~10% up to ~100% of the value derived from the X-ray spectra. The absorption may occur at different physical scales in these sources and, in particular, the medium in the host galaxy is an ingredient that should be taken into account, since it may have a relevant role in driving the early co-evolution of galaxies with their black holes.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Sediment cores, mainly push-box samples, from a channel system of the Kiel Bay are described. The channel system, of glacial and fluviatile origin, is important for the distribution of heavy, salt-rich water entering from the North Sea through the Great Belt, Sediment erosion and transport in the channels is due entirely to currents, because the bottom lies too deep for wave action. The sediments of these channels proude information about current velocities and their frequencies. Grain-size, minor sediment structures and thickness of the sediments vary remarkably. Nevertheless, for those parts of the channels where stronger currents occur, some typical features can be shown. These include: small thickness of the marine sediments, erosional effects upon the underlying sediments, and poor sorting of the sediments, whereby fine and coarse fractions are mixed very intensively. Besides strong currents which effect the bottom configuration and deposits in the Fehmarn Belt, there must exist longer periods of low current action upon the bottom, although current measurements show that current velocities higher than 50 cm/sec at some meters above the bottom occur frequently during the year. In the channel to the west of the southern mouth of Great Belt, coarse sediments were found only in elongate, deep throughs within the channels. This is believed to be due to an acceleration of the entering tongues of heavy water as they flow downslope into the throughs. Minor structures of two sediment cores were made visible by X-ray photographs. These showed that the mixing of sand and clayey material is due partly to bottom organisms and that the mud, which appears 'homogeneous' to the bare eye, is built up of fine wavy laminae which are also partly destroyed by boring animals. At another location in the channel system, there was found a thin finegrained layer of marine sediment resting upon peat. Palynological dating of the peat shows that very little older sediment could have been eroded. The current velocities, therefore, must be too low for the movement of coarse material and erosion, but too high to allow the Sedimentation of a lot of fine-grained material.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The Duke Free-electron laser (FEL) system, driven by the Duke electron storage ring, has been at the forefront of developing new light source capabilities over the past two decades. In 1999, the Duke FEL demonstrated the first lasing of a storage ring FEL in the vacuum ultraviolet (VUV) region at $194$ nm using two planar OK-4 undulators. With two helical undulators added to the outboard sides of the planar undulators, in 2005 the highest FEL gain ($47.8\%$) of a storage ring FEL was achieved using the Duke FEL system with a four-undulator configuration. In addition, the Duke FEL has been used as the photon source to drive the High Intensity $\gamma$-ray Source (HIGS) via Compton scattering of the FEL beam and electron beam inside the FEL cavity. Taking advantage of FEL's wavelength tunability as well as the adjustability of the energy of the electron beam in the storage ring, the nearly monochromatic $\gamma$-ray beam has been produced in a wide energy range from $1$ to $100$ MeV at the HIGS. To further push the FEL short wavelength limit and enhance the FEL gain in the VUV regime for high energy $\gamma$-ray production, two additional helical undulators were installed in 2012 using an undulator switchyard system to allow switching between the two planar and two helical undulators in the middle section of the FEL system. Using different undulator configurations made possible by the switchyard, a number of novel capabilities of the storage ring FEL have been developed and exploited for a wide FEL wavelength range from infrared (IR) to VUV. These new capabilities will eventually be made available to the $\gamma$-ray operation, which will greatly enhance the $\gamma$-ray user research program, creating new opportunities for certain types of nuclear physics research.

With the wide wavelength tuning range, the FEL is an intrinsically well-suited device to produce lasing with multiple colors. Taking advantage of the availability of an undulator system with multiple undulators, we have demonstrated the first two-color lasing of a storage ring FEL. Using either a three- or four-undulator configuration with a pair of dual-band high reflectivity mirrors, we have achieved simultaneous lasing in the IR and UV spectral regions. With the low-gain feature of the storage ring FEL, the power generated at the two wavelengths can be equally built up and precisely balanced to reach FEL saturation. A systematic experimental program to characterize this two-color FEL has been carried out, including precise power control, a study of the power stability of two-color lasing, wavelength tuning, and the impact of the FEL mirror degradation. Using this two-color laser, we have started to develop a new two-color $\gamma$-ray beam for scientific research at the HIGS.

Using the undulator switchyard, four helical undulators installed in the beamline can be configured to not only enhance the FEL gain in the VUV regime, but also allow for the full polarization control of the FEL beams. For the accelerator operation, the use of helical undulators is essential to extend the FEL mirror lifetime by reducing radiation damage from harmonic undulator radiation. Using a pair of helical undulators with opposite helicities, we have realized (1) fast helicity switching between left- and right-circular polarizations, and (2) the generation of fully controllable linear polarization. In order to extend these new capabilities of polarization control to the $\gamma$-ray operation in a wide energy range at the HIGS, a set of FEL polarization diagnostic systems need to be developed to cover the entire FEL wavelength range. The preliminary development of the polarization diagnostics for the wavelength range from IR to UV has been carried out.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

El objetivo del trabajo es estudiar los aportes teóricos que brinda el enfoque de las trayectorias laborales para comprender el conjunto de recorridos heterogéneos, impredecibles y discontinuos que se delinean en la vida laboral de los sujetos. Desde este lugar, realizamos una reflexión crítica junto a una sistematización teórica de aquellas investigaciones que nos aproximen a comprender cómo se construyen las biografías laborales en un contexto de intermitencia e incertidumbre. La perspectiva escogida brinda al análisis social la posibilidad de analizar estos nuevos fenómenos desde su complejidad analítica, al aprehender la dimensión objetiva y subjetiva en su articulación temporal