Contribuições da pesquisa operacional para gestão da produção e operações : uma análise exploratória da literatura

This research aims to investigate the evolution presented during three decades (1980, 1990 and 2000) of using the tools of Operations Research (OR) as a suport to decision making in Production Operation Management (POM). Hypothesis tests were made to verify the proportional growth of a given area over the decades to the detriment of the areas of facility layout, capacity planning, production scheduling and inventory management. Six journals were selected and from them more than 800 articles were used for classification and analysis in the grounds of review. It also discussed possible ways for future research and comparisons are made with other papers of literature review. As a result, it was found that areas of heuristics and simulation showed a greater quantity of contributions in all POM areas of this study

Uma avaliação comparativa de estratégias de arranjos físicos para estaleiros de construção de embarcações metálicas de pequeno porte

The present study aims to analyse, in different levels of demand, what is the best layout strategy to adopt for the small metallic shipbuilding. To achieve this purpose, three simulation models are developed for analyze these production strategies under the positional, cellular and linear layouts. By the use of a simulation tool for compare the scenarios, Chwif and Medina (2010) and Law (2009)´s methodologies were adapted that includes three phases: conception, implementation and analysis. In conception real systems were represented by process mapping according to time, material resources and human resources variables required for each step of the production process. All of this information has been transformed in the cost variable. Data were collected from three different production systems, two located in Natal RN with cellular and positional layouts and one located in Belém-PA with linear layout. In the implementation phase, the conceptual models were converted in computacional models through the tool Rockwell Software Arena ® 13.5 and then validated. In the analysis stage the production of 960 ships in a year vessels were simulated for each layout noting that, for a production of until 80 units positional layout is the most recommended, between 81 and 288 units the cellular layout and more than 289 units the linear layout

Análise da atividade de trabalho profissional de gerentes de hotel à luz da abordagem da ergonomia

This Masters degree dissertation presents a research that aims at analyzing the activities regarding within a hotel managers work in Natal/RN - Brazil, This Masters degree dissertation presents the research that aims at analyzing the activities regarding the hotel managers work in Natal / RN - Brazil, performing diagnosis of their activities and relating the aspects that impact the quality and productivity of hotel services and managers occupational health. This research is characterized as a case study with a qualitative approach, taking the method of Ergonomic Work Analysis which is the analysis of the managers work activity as a reference to the focus; and combining the use of observational and interactional methods. Ergonomics and macroergonomics are used in this study not only to understand the physical, cognitive and organizational constraints of the manager s duties, but also to characterize the work organizational architecture and design of that hotel. High workload, accumulation of tasks and diversion of functions performed by managers were noticed, increasing thereby the physical and psychological suffering for them. It was found that the activity of managers is characterized by the ambivalence of power, limited autonomy, cooperation, interdependence between managers and the fear of incompetence. It was also noticed that managers devote more time to the day job (37%), another time to sleep (30%), while only 33% of the rest of the day are meant for activities like taking care of health, family, social life and study. Although there are few studies addressing the health and safety of hotel managers, this research revealed that 84% of the surveyed hotel managers complain of musculoskeletal pain which 50% are obese and are 100% sedentary. It was also observed that managers adopt unsuitable postures for carrying out the work activities that contribute to becoming injured or work-related musculoskeletal disorders in the near future. Ergonomic measures were recommended as an investment in the skills and the training of managers, encouraging cooperative work, appropriateness of workload, limiting overtime, preserving the enjoyment of breaks during work and weekly holidays, changing the layout of the work sector , usage of communication technology to prevent displacement, compensatory physical activities, furniture adaptation, among others

Aplicação de superfícies seletivas em frequência para melhoria de resposta de arranjos de antenas planares

This work aims to show how the application of frequency selective surfaces (FSS) in planar antenna arrays become an alternative to obtain desired radiation characteristics from changes in radiation parameters of the arrays, such as bandwidth, gain and directivity. In addition to analyzing these parameters is also made a study of the mutual coupling between the elements of the array. To accomplish this study, were designed a microstrip antenna array with two patch elements, fed by a network feed. Another change made in the array was the use of the truncated ground plane, with the objective of increasing the bandwidth and miniaturize the elements of the array. In order to study the behavior of frequency selective surfaces applied in antenna arrays, three different layouts were proposed. The first layout uses the FSS as a superstrate (above the array). The second layout uses the FSS as reflector element (below the array). The third layout is placed between two FSS. Numerical and experimental results for each of the proposed configurations are presented in order to validate the research

Desenvolvimento de um software de comunicação sem fio aplicado à instrumentação de unidade de elevação de petróleo tipo Plunger Lift

This dissertation aims to develop a software applied to a communication system for a wireless sensor network (WSN) for tracking analog and digital variables and control valve of the gas flow in artificial oil s elevation units, Plunger Lift type. The reason for this implementation is due to the fact that, in the studied plant configuration, the sensors communicate with the PLC (Programmable and Logic Controller) by the cables and pipelines, making any changes in that system, such as changing the layout of it, as well as inconveniences that arise from the nature of the site, such as the vicinity s animals presence that tend to destroy the cables for interconnection of sensors to the PLC. For software development, was used communication polling method via SMAC protocol (Simple Medium Access ControlIEEE 802.15.4 standard) in the CodeWarrior environment to which generated a firmware, loaded into the WSN s transceivers, present in the kit MC13193-EVK, (all items described above are owners of Freescale Semiconductors Inc.). The network monitoring and parameterization used in its application, was developed in LabVIEW software from National Instruments. The results were obtained through the observation of the network s behavior of sensors proposal, focusing on aspects such as: indoor and outdoor quantity of packages received and lost, general aspects of reliability in data transmission, coexistence with other types of wireless networks and power consumption under different operating conditions. The results were considered satisfactory, which showed the software efficiency in this communication system

Otimização topológica de estruturas termoelásticas tridimensionais

This work presents an optimization technique based on structural topology optimization methods, TOM, designed to solve problems of thermoelasticity 3D. The presented approach is based on the adjoint method of sensitivity analysis unified design and is intended to loosely coupled thermomechanical problems. The technique makes use of analytical expressions of sensitivities, enabling a reduction in the computational cost through the use of a coupled field adjoint equation, defined in terms the of temperature and displacement fields. The TOM used is based on the material aproach. Thus, to make the domain is composed of a continuous distribution of material, enabling the use of classical models in nonlinear programming optimization problem, the microstructure is considered as a porous medium and its constitutive equation is a function only of the homogenized relative density of the material. In this approach, the actual properties of materials with intermediate densities are penalized based on an artificial microstructure model based on the SIMP (Solid Isotropic Material with Penalty). To circumvent problems chessboard and reduce dependence on layout in relation to the final optimal initial mesh, caused by problems of numerical instability, restrictions on components of the gradient of relative densities were applied. The optimization problem is solved by applying the augmented Lagrangian method, the solution being obtained by applying the finite element method of Galerkin, the process of approximation using the finite element Tetra4. This element has the ability to interpolate both the relative density and the displacement components and temperature. As for the definition of the problem, the heat load is assumed in steady state, i.e., the effects of conduction and convection of heat does not vary with time. The mechanical load is assumed static and distributed

Método de Otimização Topológica em Estruturas Tridimensionais

The topology optimization problem characterize and determine the optimum distribution of material into the domain. In other words, after the definition of the boundary conditions in a pre-established domain, the problem is how to distribute the material to solve the minimization problem. The objective of this work is to propose a competitive formulation for optimum structural topologies determination in 3D problems and able to provide high-resolution layouts. The procedure combines the Galerkin Finite Elements Method with the optimization method, looking for the best material distribution along the fixed domain of project. The layout topology optimization method is based on the material approach, proposed by Bendsoe & Kikuchi (1988), and considers a homogenized constitutive equation that depends only on the relative density of the material. The finite element used for the approach is a four nodes tetrahedron with a selective integration scheme, which interpolate not only the components of the displacement field but also the relative density field. The proposed procedure consists in the solution of a sequence of layout optimization problems applied to compliance minimization problems and mass minimization problems under local stress constraint. The microstructure used in this procedure was the SIMP (Solid Isotropic Material with Penalty). The approach reduces considerably the computational cost, showing to be efficient and robust. The results provided a well defined structural layout, with a sharpness distribution of the material and a boundary condition definition. The layout quality was proporcional to the medium size of the element and a considerable reduction of the project variables was observed due to the tetrahedrycal element

Evaluation of the Cartographic Communication Performance of a Route Guidance and Navigation System

This study evaluates the influence of different cartographic representations of in-car navigation systems on visual demand, subjective preference, and navigational error. It takes into account the type and complexity of the representation, maneuvering complexity, road layout, and driver gender. A group of 28 drivers (14 male and 14 female) participated in this experiment which was performed in a low-cost driving simulator. The tests were performed on a limited number of instances for each type of representation, and their purpose was to carry out a preliminary assessment and provide future avenues for further studies. Data collected for the visual demand study were analyzed using non-parametric statistical analyses. Results confirmed previous research that showed that different levels of design complexity significantly influence visual demand. Non-grid-like road networks, for example, influence significantly visual demand and navigational error. An analysis of simple maneuvers on a grid-like road network showed that static and blinking arrows did not present significant differences. From the set of representations analyzed to assess visual demand, both arrows were equally efficient. From a gender perspective, women seem to took at the display more than men, but this factor was not significant. With respect to subjective preferences, drivers prefer representations with mimetic landmarks when they perform straight-ahead tasks. For maneuvering tasks, landmarks in a perspective model created higher visual demands.

Comunicação gráfica em interfaces de hipermídia de educação a distância via web

This study aims to analyze the communication graphics of layouts of hypermedia interfaces oriented to Distance Education via the Internet. This proposal is justified by widening the offer of courses that modality and the consequent application of items of hypermedia for teaching-learning. The method of analysis involved the search nethnographic, addressed to the cycle student intermediary of the Training Program Continuing Medias in Education, and the evaluation heuristic of the interfaces of Virtual Learning Environment "E-Proinfo" and of the modules of the Cycle. This evaluation we observed the implementation of the attributes of usability and the degree of interactivity of each interface. The results revealed an inefficient implementation of the attributes of usability, which meant a consequent reduction of the levels of interactivity. As proposing the present Design Virtual Learning, a model of hypermedia layout, designed to generate usability for Virtual learning environments and extend the acquisition of literancy for students and tutors. This proposal design not hypermedia aims the demarcation of models pre-conceived, but the proposal of layout in which each element of hypermedia is applied with a view to generate a seaworthiness intuitive, more agile and efficient, in these ambients

Characterization of metallic electrical contacts to SnO2 thin films lightly doped with Eu3+ ions, and photo-induced resistivity

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

"Espaços (mal) ditos": representações dos bordéis Mossoroenses nas décadas de 1950 e 1960

The city that presents itself to our eyes is not just made of stone. The urban layout hides the tactics of the subjects who subjectivate spaces, giving it meaning through the representations that it produces, whether written or oral. The city's art, is represented, is home to the place where the good and bad places. The aim of this study is to analyze the representations about the spaces occupied by mossoroenses brothels in the 1950 and 1960. With this goal we organize the work into three chapters. At first, we present the formation of red-light district in the city, highlighting the composition of the bohemian spaces in good and bad places. In the second chapter we discuss how the representations developed by the newspaper O Mossoroense created a space damn for identifying the area as a place of crime and misdemeanor. In the last chapter we seek to identify and reconstruct the residents of Mossoró, in contemporary times, their memories about the peak time of the brothels in the city. In oral narratives seek to understand how people describe the places of the brothel, comparing the spatiality of the past with this experienced in the city. Therefore, we discuss how these spaces have been turned into places of pleasure and a curse, as places become common in places marked morally.

Ergonomics work analysis applied to dentistry - a Brazilian case study

This paper presents the Ergonomic Work Analysis method in a Brazilian Dentist's office. Through the study, the constraints and the strategies in avoiding them were identified. It was found that dentists hardly use the position most indicated by the International Organization for Standardization (ISO) and the Federation Dentaire Internacionale (FDI) for both the patient and the dentist, which is respectively supine and 9 o'clock, due to the limited space and layout. Five types of treatments performed by the professional have been studied. The frequency and duration of actions in these treatments were accounted for and the standard positions adopted were identified. The AET was found to be a very suitable method to grasp the dentist's activity and build a point of view of the profession, which is characterized as: stressful, perfectionist and restrictive. Time management is presented as an important strategy to control the tension arising from performing the treatments.

Low voltage four-quadrant current multiplier: An improved topology for n-well CMOS process

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A psicologia e o programa de saúde da família :novas possibilidades, velhos dogmas?

The model of attention to health has been suffering alterations due to the difficulty faced to put into practice its universal, democratic and institutional layout. Since the movement of Sanitary Reform, which focused in the demands of a new health context and the process of work in the area of health, one seeks uninterruptedly, to find a way which leads to the execution of the principles of SUS. Despite having tried, the model of Sanitary Vigilance centered within the work of a multi-professional team has shown fragmentation and little adequacy to the necessity of health in the population. Whilst inserting himself in the field of health, the psychology professional has taken with him his clinic way of attending to individuals being one more in the team to act in a de-contextualised and little critical way. In virtue of this framework, the Ministry of Health invests in the Family Health Program as a new guide in the health system, restructuring the basic attention at a new logic of action. In this way, the municipality of Natal-RN implants, in the year 2002, the PSF in the Northern Sanitary District, a context in which professional teams are created where there is not an inclusion of a psychologist. Consequently, this professional is excluded of his work space in the previous Basic Unities of Health. This piece of work constitutes in the investigation of the implementation and instrumentalization of the Northern Sanitary District PSF of Natal-RN, having as its objective to analyze the implications of this execution for the structuring of the health network services and more specifically the alterations that this implementation could be making to the practice of the Psychology Professionals, emphasizing its advances, obstacles and limitations. To make this work feasible it was necessary to search for data and information from the implementation and execution of the PSF in the DSN, carrying interviews from a semi-structured guide, with 21 institutional actors (members of the team, coordinators and directors of the unities and psychologists)

Low voltage four-quadrant current multiplier: an improved topology for n-well CMOS process

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)