847 resultados para Waiting for Godot
Resumo:
BACKGROUND: Total hip replacements (THRs) and total knee replacements (TKRs) are common elective procedures. In the REsearch STudies into the ORthopaedic Experience (RESTORE) programme, we explored the care and experiences of patients with osteoarthritis after being listed for THR and TKR up to the time when an optimal outcome should be expected. OBJECTIVE: To undertake a programme of research studies to work towards improving patient outcomes after THR and TKR. METHODS: We used methodologies appropriate to research questions: systematic reviews, qualitative studies, randomised controlled trials (RCTs), feasibility studies, cohort studies and a survey. Research was supported by patient and public involvement. RESULTS: Systematic review of longitudinal studies showed that moderate to severe long-term pain affects about 7–23% of patients after THR and 10–34% after TKR. In our cohort study, 10% of patients with hip replacement and 30% with knee replacement showed no clinically or statistically significant functional improvement. In our review of pain assessment few research studies used measures to capture the incidence, character and impact of long-term pain. Qualitative studies highlighted the importance of support by health and social professionals for patients at different stages of the joint replacement pathway. Our review of longitudinal studies suggested that patients with poorer psychological health, physical function or pain before surgery had poorer long-term outcomes and may benefit from pre-surgical interventions. However, uptake of a pre-operative pain management intervention was low. Although evidence relating to patient outcomes was limited, comorbidities are common and may lead to an increased risk of adverse events, suggesting the possible value of optimising pre-operative management. The evidence base on clinical effectiveness of pre-surgical interventions, occupational therapy and physiotherapy-based rehabilitation relied on small RCTs but suggested short-term benefit. Our feasibility studies showed that definitive trials of occupational therapy before surgery and post-discharge group-based physiotherapy exercise are feasible and acceptable to patients. Randomised trial results and systematic review suggest that patients with THR should receive local anaesthetic infiltration for the management of long-term pain, but in patients receiving TKR it may not provide additional benefit to femoral nerve block. From a NHS and Personal Social Services perspective, local anaesthetic infiltration was a cost-effective treatment in primary THR. In qualitative interviews, patients and health-care professionals recognised the importance of participating in the RCTs. To support future interventions and their evaluation, we conducted a study comparing outcome measures and analysed the RCTs as cohort studies. Analyses highlighted the importance of different methods in treating and assessing hip and knee osteoarthritis. There was an inverse association between radiographic severity of osteoarthritis and pain and function in patients waiting for TKR but no association in THR. Different pain characteristics predicted long-term pain in THR and TKR. Outcomes after joint replacement should be assessed with a patient-reported outcome and a functional test. CONCLUSIONS: The RESTORE programme provides important information to guide the development of interventions to improve long-term outcomes for patients with osteoarthritis receiving THR and TKR. Issues relating to their evaluation and the assessment of patient outcomes are highlighted. Potential interventions at key times in the patient pathway were identified and deserve further study, ultimately in the context of a complex intervention.
Resumo:
Com as constantes mudanças de mercado, as empresas enfrentam cada vez mais obstáculos para se manterem competitivas e inovadoras, para isso procuram formas de sobreviver seguindo filosofias e utilizando ferramentas que permita atingir os seus objetivos. A filosofia Lean é uma filosofia seguida por muitas empresas que pretendam criar valor eliminando desperdícios. O objetivo deste projeto passa pela implementação de ferramentas Lean de modo a criar estabilidade no processo produtivo, eliminando desperdícios e criando valor. Com foco neste objetivo estudou-se as principais fontes de variabilidade no processo produtivo nos 4M’s (Máquina, Método, Mão-de-Obra e Máquina). Após essa análise foram implementadas ações de melhoria como os 5S, criação de sistemas visuais, redução do tempos de setup e tempos de espera, introdução de kanbans e padronização dos métodos de trabalho.Com a implementação destas medidas foi possível tornar o processo produtivo mais estável e flexível, com capacidade para responder às constantes alterações de mercado.
Resumo:
Background Infant mortality in rural areas of Nigeria can be minimized if childhood febrile conditions are treated by trained health personnel, deployed to primary healthcare centres (PHCs) rather than the observed preference of mothers for patent medicine dealers (PMDs). However, health service utilization/patronage is driven by consumer satisfaction and perception of services/product value. The objective of this study was to determine ‘mothers’ perception of recovery’ and ‘mothers’ satisfaction’ after PMD treatment of childhood febrile conditions, as likely drivers of mothers’ health-seeking behaviour, which must be targeted to reverse the trend. Methods Ugwuogo-Nike, in Enugu, Nigeria, has many PMDs/PHCs, and was selected based on high prevalence of childhood febrile conditions. In total, 385 consenting mothers (aged 15–45 years) were consecutively recruited at PMD shops, after purchasing drugs for childhood febrile conditions, in a cross-sectional observational study using a pre-tested instrument; 33 of them (aged 21–47 years) participated in focus group discussions (FGDs). Qualitative data were thematically analysed while a quantitative study was analysed with Z score and Chi square statistics, at p < 0.05. Results Most participants in FGDs perceived that their child had delayed recovery, but were satisfied with PMDs’ treatment of childhood febrile conditions, for reasons that included politeness, caring attitude, drug availability, easy accessibility, flexibility in pricing, shorter waiting time, their God-fearing nature, and disposition as good listeners. Mothers’ satisfaction with PMDs’ treatment is significantly (p < 0.05) associated with mothers’ perception of recovery of their child (χ2 = 192.94, df = 4; p < 0.0001; Cramer’s V = 0.7079). However, predicting mothers’ satisfaction with PMDs’ treatment from a knowledge of mothers’ perception of recovery shows a high accord (lambda[A from B] = 0.8727), unlike when predicting mothers’ perception of recovery based on knowledge of mothers’ satisfaction with PMDs’ treatment (lambda[A from B] = 0.4727). Conclusions Mothers’ satisfaction could be the key ‘driver’ of mothers’ health-seeking behaviour and is less likely to be influenced by mothers’ perception of recovery of their child. Therefore, mothers’ negative perception of their child’s recovery may not induce proportionate decline in mothers’ health-seeking behaviour (patronage of PMDs), which might be influenced mainly by mothers’ satisfaction with the positive attributes of PMDs’ personality/practice and sets an important agenda for PHC reforms.
Resumo:
Este relatório contempla um período de estágio de 8 meses numa empresa transformadora de bacalhau, com o objetivo de melhorar a sua competitividade. A análise revelou um planeamento informal à base da experiência, com custos associados – stocks excessivos ou escassos, falta de planeamento médio/longo prazo, tempos de espera, entre outros, provocando desperdícios a minimizar ou mesmo corrigir e um conjunto de problemas no processo produtivo que foram devidamente identificados. As propostas de solução contemplaram uma análise estratégica com o modelo de Porter e uma análise SWOT. Relativamente aos desperdícios identificados, utilizou-se a filosofia Lean, concretamente os 5S, para sugerir e implementar um vasto conjunto de melhorias.
Resumo:
Bakgrund: För att uppnå en god barnanpassad vård inom ortopedteknik krävs information om hur barn uppfattar mötet på en ortopedteknisk avdelning. Genom att ta del av barns tankar, åsikter och förslag kan verksamheter i framtiden lättare argumentera för exempelvis hur lokaler bör inredas och hur man bör bemöta barn. Syfte: Syftet med denna studie är att undersöka hur barn upplever mötet på en ortopedteknisk avdelning i avseendet vårdmiljö och möte med ortopedingenjören. Metod: En kvalitativ metod där deltagarna får rita och berätta kallad “Draw and tell” och åtta intervjuer med barn mellan 6 till 12 år om deras upplevelse efter besöket hos en ortopedingenjör genomfördes. Intervjuerna transkripterades och en innehållsanalys genomfördes. Resultat: Vissa gemensamma faktorer hittades i intervjuerna så som att det ansågs att det samtalades för mycket utan att engagera barnet samt att aktiviteter som fanns sågs som bra då det kunde bli lite väntan under besöket. Det fanns flera förslag på andra aktiviteter som önskades under väntan och speglade barnens egna intressen så som datorspel och böcker. Slutsats: Denna studie visar att det som ortopedingenjören är viktigt att engagera barnen vid mötena samt att aktiviteter finns till hands under långa väntetider. Nyckelord: Barns upplevelser, ortopedteknik, ortopedingenjör, bemötande, miljö
Resumo:
The presence of microorganisms in ophthalmic instruments and surfaces can lead to the exposure of patients to several infections. However, there is no information regarding fungal and bacteria contamination in optical shops. This study aims to characterize fungi and bacteria contamination in air and surfaces from 10 optical shops covering also ophthalmic instruments. Air samples were collected through an impaction method onto malt extract agar (MEA) supplemented with chloramphenicol (0.05%) used for fungi and Tryptic Soy Agar (TSA) supplemented with nystatin (0.2%) used for bacteria. Outdoor samples were also performed to be used as reference. Surface and equipment’s swab samples were also collected side-by-side. All the collected samples were incubated at 27ºC for 5 to 7 days (fungi) or at 30º for 7 days (bacteria). Regarding fungal distribution, thirteen different species/genera were found in the air, being the most common Alternaria sp. (62.0%). Eight different species/genera were identified in the surfaces, ranging from 2 to 5x104 CFU/m2, being the most common A. versicolor complex and Penicillium sp. (40.0%). The trial frames were the most contaminated equipment, since 50.0% of the collected samples were with countless colonies. The airborne bacterial population indicated higher concentrations in the contactology office (average: 133 CFU/m3) than in the client’s waiting rooms (average: 126 CFU/m3). The surface samples indicated bacterial concentrations ranging from 2x104 to 1x106 CFU/m2, pointing out the automatic refractometer as the surface with higher bacterial load.
Resumo:
Des contraintes d’accessibilité aux services de physiothérapie en clinique externe ont été rapportées dans les établissements publics au Canada. Celles-ci se traduisent souvent par un temps d’attente élevé avant d’obtenir des services. Différentes stratégies ont été proposées afin de gérer les listes d’attente, mais leur impact sur le temps d’attente est méconnu, notamment dans le contexte des services de physiothérapie au Québec. Le but de cette étude était de documenter l’accessibilité aux services de physiothérapie en clinique externe dans les centres hospitaliers au Québec. Les objectifs spécifiques étaient de 1) décrire les caractéristiques organisationnelles en lien avec l’accessibilité aux services de physiothérapie, 2) quantifier le temps d’attente pour accéder aux services et 3) explorer l’association entre les caractéristiques organisationnelles et le temps d’attente. Une enquête a été réalisée dans les cliniques externes de physiothérapie des centres hospitaliers publics du Québec offrant des services à des adultes souffrant de troubles musculosquelettiques. Des données ont été obtenues auprès de 97 (99%) centres hospitaliers. Au moment de l’enquête, 18 245 personnes étaient sur les listes d’attente. Le temps d’attente médian était de plus de six mois dans 41% des centres hospitaliers. Parmi les pratiques organisationnelles et les stratégies de gestion de listes d’attente évaluées, les politiques en cas d’annulation ou d’absence (99%) et la priorisation des demandes (96%) étaient les plus utilisées. Selon les résultats d’analyses multivariées, seule l’utilisation d’une méthode de priorisation comprenant une rencontre d’évaluation et une intervention initiale était associée au temps d’attente (p=0,008). Les résultats de cette étude démontrent qu’une grande quantité de personnes sont inscrites sur les listes d’attente des services de physiothérapie et que le temps d’attente peut être très élevé. D’après nos résultats, l’implantation d’une méthode de priorisation comprenant une évaluation et une intervention pourrait permettre d’améliorer l’accès en temps opportun aux services de physiothérapie.
Resumo:
In this study the relationship between heterogeneous nucleate boiling surfaces and deposition of suspended metallic colloidal particles, popularly known as crud or corrosion products in process industries, on those heterogeneous sites is investigated. Various researchers have reported that hematite is a major constituent of crud which makes it the primary material of interest; however the models developed in this work are irrespective of material choice. Qualitative hypotheses on the deposition process under boiling as proposed by previous researchers have been tested, which fail to provide explanations for several physical mechanisms observed and analyzed. In this study a quantitative model of deposition rate has been developed on the basis of bubble dynamics and colloid-surface interaction potential. Boiling from a heating surface aids in aggregation of the metallic particulates viz. nano-particles, crud particulate, etc. suspended in a liquid, which helps in transporting them to heating surfaces. Consequently, clusters of particles deposit onto the heating surfaces due to various interactive forces, resulting in formation of porous or impervious layers. The deposit layer grows or recedes depending upon variations in interparticle and surface forces, fluid shear, fluid chemistry, etc. This deposit layer in turn affects the rate of bubble generation, formation of porous chimneys, critical heat flux (CHF) of surfaces, activation and deactivation of nucleation sites on the heating surfaces. Several problems are posed due to the effect of boiling on colloidal deposition, which range from research initiatives involving nano-fluids as a heat transfer medium to industrial applications such as light water nuclear reactors. In this study, it is attempted to integrate colloid and surface science with vapor bubble dynamics, boiling heat transfer and evaporation rate. Pool boiling experiments with dilute metallic colloids have been conducted to investigate several parameters impacting the system. The experimental data available in the literature is obtained by flow experiments, which do not help in correlating boiling mechanism with the deposition amount or structure. With the help of experimental evidences and analysis, previously proposed hypothesis for particle transport to the contact line due to hydrophobicity has been challenged. The experimental observations suggest that deposition occurs around the bubble surface contact line and extends underneath area of the bubble microlayer as well. During the evaporation the concentration gradient of a non-volatile species is created, which induces osmotic pressure. The osmotic pressure developed inside the microlayer draws more particles inside the microlayer region or towards contact line. The colloidal escape time is slower than the evaporation time, which leads to the aggregation of particles in the evaporating micro-layer. These aggregated particles deposit onto or are removed from the heating surface, depending upon their total interaction potential. Interaction potential has been computed with the help of surface charge and van der Waals potential for the materials in aqueous solutions. Based upon the interaction-force boundary layer thickness, which is governed by debye radius (or ionic concentration and pH), a simplified quantitative model for the attachment kinetics is proposed. This attachment kinetics model gives reasonable results in predicting attachment rate against data reported by previous researchers. The attachment kinetics study has been done for different pH levels and particle sizes for hematite particles. Quantification of colloidal transport under boiling scenarios is done with the help of overall average evaporation rates because generally waiting times for bubbles at the same position is much larger than growth times. In other words, from a larger measurable scale perspective, frequency of bubbles dictates the rate of collection of particles rather than evaporation rate during micro-layer evaporation of one bubble. The combination of attachment kinetics and colloidal transport kinetics has been used to make a consolidated model for prediction of the amount of deposition and is validated with the help of high fidelity experimental data. In an attempt to understand and explain boiling characteristics, high speed visualization of bubble dynamics from a single artificial large cavity and multiple naturally occurring cavities is conducted. A bubble growth and departure dynamics model is developed for artificial active sites and is validated with the experimental data. The variation of bubble departure diameter with wall temperature is analyzed with experimental results and shows coherence with earlier studies. However, deposit traces after boiling experiments show that bubble contact diameter is essential to predict bubble departure dynamics, which has been ignored previously by various researchers. The relationship between porosity of colloid deposits and bubbles under the influence of Jakob number, sub-cooling and particle size has been developed. This also can be further utilized in variational wettability of the surface. Designing porous surfaces can having vast range of applications varying from high wettability, such as high critical heat flux boilers, to low wettability, such as efficient condensers.
Resumo:
Resource allocation decisions are made to serve the current emergency without knowing which future emergency will be occurring. Different ordered combinations of emergencies result in different performance outcomes. Even though future decisions can be anticipated with scenarios, previous models follow an assumption that events over a time interval are independent. This dissertation follows an assumption that events are interdependent, because speed reduction and rubbernecking due to an initial incident provoke secondary incidents. The misconception that secondary incidents are not common has resulted in overlooking a look-ahead concept. This dissertation is a pioneer in relaxing the structural assumptions of independency during the assignment of emergency vehicles. When an emergency is detected and a request arrives, an appropriate emergency vehicle is immediately dispatched. We provide tools for quantifying impacts based on fundamentals of incident occurrences through identification, prediction, and interpretation of secondary incidents. A proposed online dispatching model minimizes the cost of moving the next emergency unit, while making the response as close to optimal as possible. Using the look-ahead concept, the online model flexibly re-computes the solution, basing future decisions on present requests. We introduce various online dispatching strategies with visualization of the algorithms, and provide insights on their differences in behavior and solution quality. The experimental evidence indicates that the algorithm works well in practice. After having served a designated request, the available and/or remaining vehicles are relocated to a new base for the next emergency. System costs will be excessive if delay regarding dispatching decisions is ignored when relocating response units. This dissertation presents an integrated method with a principle of beginning with a location phase to manage initial incidents and progressing through a dispatching phase to manage the stochastic occurrence of next incidents. Previous studies used the frequency of independent incidents and ignored scenarios in which two incidents occurred within proximal regions and intervals. The proposed analytical model relaxes the structural assumptions of Poisson process (independent increments) and incorporates evolution of primary and secondary incident probabilities over time. The mathematical model overcomes several limiting assumptions of the previous models, such as no waiting-time, returning rule to original depot, and fixed depot. The temporal locations flexible with look-ahead are compared with current practice that locates units in depots based on Poisson theory. A linearization of the formulation is presented and an efficient heuristic algorithm is implemented to deal with a large-scale problem in real-time.
Resumo:
Objectives: We report an atypical presentation of eosinophilic fasciitis and provide a concise overview of the literature. Materials and Methods: Clinical and laboratory findings in a patient presenting with fever and skin induration were recorded. A deep muscle biopsy was performed in order to confirm the diagnosis. Results: A spontaneous favourable clinical and radiological evolution was observed. Conclusion: The diagnosis of eosinophilic fasciitis is challenging due to the lack of pathognomonic signs and symptoms. As spontaneous resolution has been described, watchful waiting is defendable depending on the clinical presentation. Although magnetic resonance imaging (MRI) can be useful in establishing the diagnosis, a deep muscle biopsy remains the gold standard diagnostic tool.
Resumo:
Virtual-build-to-order (VBTO) is a form of order fulfilment system in which the producer has the ability to search across the entire pipeline of finished stock, products in production and those in the production plan, in order to find the best product for a customer. It is a system design that is attractive to Mass Customizers, such as those in the automotive sector, whose manufacturing lead time exceeds their customers' tolerable waiting times, and for whom the holding of partly-finished stocks at a fixed decoupling point is unattractive or unworkable. This paper describes and develops the operational concepts that underpin VBTO, in particular the concepts of reconfiguration flexibility and customer aversion to waiting. Reconfiguration is the process of changing a product's specification at any point along the order fulfilment pipeline. The extent to which an order fulfilment system is flexible or inflexible reveals itself in the reconfiguration cost curve, of which there are four basic types. The operational features of the generic VBTO system are described and simulation is used to study its behaviour and performance. The concepts of reconfiguration flexibility and floating decoupling point are introduced and discussed.
Resumo:
Objective: To know the perception of informal caregivers regarding the care for a family member with head and neck cancer. Methods: Qualitative study conducted between March and May 2014 in the radiotherapy outpatient center of the Centro de Alta Complexidade em Oncologia – CACON (Oncology High Complexity Center) of the Hospital Universitário de Brasília – HUB (University Hospital of Brasília) using semi-structured interviews with nine caregivers about the experience of caring for family members. Data underwent Content Analysis and four units of meaning were identified: “Representation of cancer in the Family”, “The care as debt, individual reward or reconstruction of family ties”, “Repercussions of cancer on the caregiver’s personal life” and “Social support and network used by caregivers”. Results: Feelings of sadness and surprise at the moment of diagnosis were attributed to cancer, as well as the idea of punishment. The care was seen as personal satisfaction, accomplishment and opportunity for family rapprochement. Work overload and change in routine were altered functions. Religiosity, exchange of experience in the waiting room and institutional support appeared as coping strategies. Conclusion: The experience of caring for family members with head and neck cancer directly interferes in the lives of caregivers. Pointing out the institutional embracement as a strategy within the social network reinforces the importance of integrating the caregivers as a significant part of the health care plan developed by the health team.
Resumo:
This study is about the comparison of simulation techniques between Discrete Event Simulation (DES) and Agent Based Simulation (ABS). DES is one of the best-known types of simulation techniques in Operational Research. Recently, there has been an emergence of another technique, namely ABS. One of the qualities of ABS is that it helps to gain a better understanding of complex systems that involve the interaction of people with their environment as it allows to model concepts like autonomy and pro-activeness which are important attributes to consider. Although there is a lot of literature relating to DES and ABS, we have found none that focuses on exploring the capability of both in tackling the human behaviour issues which relates to queuing time and customer satisfaction in the retail sector. Therefore, the objective of this study is to identify empirically the differences between these simulation techniques by stimulating the potential economic benefits of introducing new policies in a department store. To apply the new strategy, the behaviour of consumers in a retail store will be modelled using the DES and ABS approach and the results will be compared. We aim to understand which simulation technique is better suited to human behaviour modelling by investigating the capability of both techniques in predicting the best solution for an organisation in using management practices. Our main concern is to maximise customer satisfaction, for example by minimising their waiting times for the different services provided.
Resumo:
Introdução e Objetivos: A trombose venosa profunda (TVP) e o tromboembolismo pulmonar são os componentes do tromboembolismo venoso (TEV) que, embora infrequente, é uma entidade emergente na pediatria. Apresentamos uma casuística cujo objetivo é a avaliação dos aspetos mais relevantes da TVP em idade pediátrica e da sua abordagem terapêutica. Metodologia: Revisão retrospetiva descritiva dos processos dos doentes internados na última década com o diagnóstico de TVP no Serviço de Pediatria da ULSAM. Resultados: Identificaram-se seis doentes, cinco deles do sexo feminino. A mediana de idades foi 17 anos. O edema do membro afetado esteve sempre presente e o segmento venoso mais atingido foi o ileofemoral (2/6). Houve concomitância de pelo menos dois fatores de risco adquiridos em três doentes, sendo o mais frequente o contracetivo oral combinado. Foi excluída trombofilia hereditária em cinco doentes mas ainda aguardamos o resultado do estudo de um doente. O tempo médio de tratamento foi de 9,8 meses. Discussão e Conclusão: A TVP na criança tem sido reconhecida como uma patologia rara, mas importante causa de morbilidade. A maior incidência de TVP foi documentada na adolescência com compromisso do membro inferior, tal como referido na literatura. Verificamos uma conjugação de fatores de risco que, provavelmente, se potenciaram entre si levando à ocorrência do TEV e colocamos a possibilidade do Pediatra se estar a deparar com uma nova realidade anteriormente excluída do atendimento pediátrico. O aumento na incidência desta patologia levanta a questão do acréscimo de risco trombótico nos adolescentes do sexo feminino devido à utilização de contracetivos orais combinados. Salientamos a importância de um consenso nacional no diagnóstico, tratamento e prevenção desta entidade em Pediatria.
Resumo:
Kidney transplantation is the preferred treatment for many end stage renal disease patients; however, the small number of organs for transplantation does not allow all patients to have access to this scarce resource. An allocation system for deceased donor kidneys should be anchored to transparent policies and rules. It should take into account the relationship between supply and demand, hence seeking a balance between the higher net benefit of survival that can be provided by a particular organ and the transplant candidates’ waiting time (as well as the probability of being transplanted).