Use of Fibres Obtained from the Cashew (Anacardium ocidentale, L) and Guava (Psidium guayava) Fruits for Enrichment of Food Products

OLIVEIRA, E. L. et al. Use of Fibres obtained from the Cashew (Anacardium ocidentale, L) and Guava (Psidium guayava) Fruits for Enrichment of Food Products. Brazilian Archives of Biology and Technology, Curitiba, PR, v. 48, p. 143-150, 2005.

Síntese, caracterização e estudo da regeneração do silicoaluminofosfato-11 (SAPO-11)

heterogeneous catalyst such as a silicoaluminophosphate, molecular sieve with AEL (Aluminophosphate eleven) structure such as SAPO-11, was synthesized through the hydrothermal method starting from silica, pseudoboehmite, orthophosphoric acid (85%) and water, in the presence of a di-isopropylamine organic template. For the preparation of SAPO-11 in a dry basis it was used as reactants: DIPA; H3PO4; SiO4; Pseudoboehmite and distilled water. The crystallization process occurred when the reactive hydrogel was charged into a vessel and autoclaved at 200ºC for a period of 72 hours under autogeneous pressure. The obtained material was washed, dried and calcined to remove the molecular sieves of DIPA. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (FT-IR), nitrogen adsorption (BET) and thermal analysis (TG/DTG). The acidic properties were determined using adsorption of nbutylamine followed by programmed thermodessorption. This method revealed that SAPO-11 shows an acidity that ranges from weak to moderate. However, a small quantity of strong acid sites could be detected there. The deactivation of the catalysts was conducted by artificial coking followed by the cracking of the n-hexane in a fixed bed with a continuous flow micro-reactor coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the regeneration and removal of the coke

Estudos comparativos do ciclo de regeneração de diferentes tipos de silicoaluminofosfatos

Different types of heterogeneous catalysts of the silicoaluminophosphate type, (SAPO-5, SAPO-11, SAPO-31, SAPO-34 and SAPO-41), molecular sieves with a: AFI, AEL, ATO, CHA and AFO structure, respectively, were synthesized through the hydrothermal method. Using sources such as hydrated alumina (pseudobohemita), phosphoric acid, silica gel, water, as well as, different types of organic structural templates, such as: cetyltrimethylammonium bromide (CTMABr), di-isopropylamine (DIPA), di-n- propylamine (DNPA) and tetraethylammonium hydroxide (TEOS), for the respective samples. During the preparation of the silicoaluminophosphates, the crystallization process of the samples occurred at a temperature of approximately 200 ° C, ranging through periods of 18-72 h, when it was possible to obtain pure phases for the SAPOs. The materials were furthermore washed with deionized water, dried and calcined to remove the molecules of the templates. Subsequently the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared region (FT-IR), specific surface area and thermal analysis via TG/DTG. The acidic properties were determined using adsorption of n-butylamine followed by programmed termodessorption. These methods revealed that the SAPO samples showed a typically weak to moderate acidity. However, a small amount of strong acid sites was also detected. The deactivation of the catalysts was conducted by artificially coking the samples, followed by n-hexane cracking reactions in a fixed bed with a continuous flow micro-reactor coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the catalysts regeneration and removal of the coke

Conversão térmica e termocatalítica à baixa temperatura do óleo de girassol para obtenção de bio-óleo

The use of biofuels remotes to the eighteenth century, when Rudolf Diesel made the first trials using peanut oil as fuel in a compression ignition engine. Based on these trials, there was the need for some chemical change to vegetable oil. Among these chemical transformations, we can mention the cracking and transesterification. This work aims at conducting a study using the thermocatalytic and thermal cracking of sunflower oil, using the Al-MCM-41 catalyst. The material type mesoporous Al-MCM-41 was synthesized and characterized by Hydrothermical methods of X-ray diffraction, scanning electron microscopy, nitrogen adsorption, absorption spectroscopy in the infrared and thermal gravimetric analysis (TG / DTG).The study was conducted on the thermogravimetric behavior of sunflower oil on the mesoporous catalyst cited. Activation energy, conversion, and oil degradation as a function of temperature were estimated based on the integral curves of thermogravimetric analysis and the kinetic method of Vyazovkin. The mesoporous material Al-MCM-41 showed one-dimensional hexagonal formation. The study of the kinetic behavior of sunflower oil with the catalyst showed a lower activation energy against the activation energy of pure sunflower oil. Two liquid fractions of sunflower oil were obtained, both in thermal and thermocatalytic pyrolisis. The first fraction obtained was called bio-oil and the second fraction obtained was called acid fraction. The acid fraction collected, in thermal and thermocatalytic pyrolisis, showed very high level of acidity, which is why it was called acid fraction. The first fraction was collected bio-called because it presented results in the range similar to petroleum diesel

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Análise paramétrica do método de injeção alternada de água e CO2(WAG) em reservatórios de petróleo

After the decline of production from natural energy of the reservoir, the methods of enhanced oil recovery, which methods result from the application of special processes such as chemical injection, miscible gases, thermal and others can be applied. The advanced recovery method with alternating - CO2 injection WAG uses the injection of water and gas, normally miscible that will come in contact with the stock oil. In Brazil with the discovery of pre-salt layer that gas gained prominence. The amount of CO2 present in the oil produced in the pre-salt layer, as well as some reservoirs is one of the challenges to be overcome in relation to sustainable production once this gas needs to be processed in some way. Many targets for CO2 are proposed by researchers to describe some alternatives to the use of CO2 gas produced such as enhanced recovery, storage depleted fields, salt caverns storage and marketing of CO2 even in plants. The largest oil discoveries in Brazil have recently been made by Petrobras in the pre -salt layer located between the states of Santa Catarina and Espírito Santo, where he met large volumes of light oil with a density of approximately 28 ° API, low acidity and low sulfur content. This oil that has a large amount of dissolved CO2 and thus a pioneering solution for the fate of this gas comes with an advanced recovery. The objective of this research is to analyze which parameters had the greatest influence on the enhanced recovery process. The simulations were performed using the "GEM" module of the Computer Modelling Group, with the aim of studying the advanced recovery method in question. For this work, semi - synthetic models were used with reservoir and fluid data that can be extrapolated to practical situations in the Brazilian Northeast. The results showed the influence of the alternating injection of water and gas on the recovery factor and flow rate of oil production process, when compared to primary recovery and continuous water injection or continuous gas injection

Melão amarelo (CAC) minimamente processado submetido a diferentes cortes e concentrações de cloreto de cálcio armazenado em atmosfera modificada passiva

The aim of this work was to evaluate the quality of yellow melon inodorus Valenciano Amarelo (CAC) fresh cut submitted to two cut types and with application postharvest of calcium chloride. After preparation cubes and slices melon were immersed in solution with different calcium chloride (CaCl2) concentrations for two minutes, afterwards they were conditioned in trays of expanded polystyrene (EPS), covered by plastic film of low density polyethylene (PEBD), stored in cold camera to 5 degrees C +/- 1 and analyzed for 8 days. They were evaluated pH, firmness, tritable acidity (AT), soluble solids (SS) sugar reducer and ratio. The pH values varied from 5.27 to 5.68. The sugars reducers content and the ratio were superior in the slices compared to the cubes. The melon slices maintained larger firmness values compared to the cubes and in general there was reduction in the values of this parameter along the storage period for all treatments. Concentrations of 1.0 and 1.5% of CaCl2, result in larger values of firmness. The storage temperature and modified passive atmosphere they contributed to quality maintenance of MP melon. Concentrations of up to 1.0% of CaCl2 they could be recommended to maintain the melon quality MP melon yellow inodorus (CAC).

Qualidade de abóbora minimamente processada armazenada em atmosfera modificada ativa

The active modified atmosphere effect was evaluated in the quality of squash fresh-cut (MP).. The squash pieces were conditioned in plastic packings and submitted the gases application in the following concentrations: 0.03% CO2 and 21% O-2 (controls T1); 5% CO2 and 4% O-2 (T2); 6% CO2 and 4% O-2 (T3); 7% CO2 and 4% O-2 (T4); 8% CO2 and 4% O-2 (T5). In T6 it was made vacuum application in the packing. The packings containing the squash were stored in to the temperature of 10 degrees C and relative humidity of 75% for 12 days. The evaluated analyses were weigth loss, total acidity (AT), pH, soluble solids (SS), ratio, firmness, color, antioxidant activity for DPPH and carotenoids content. The weigth loss was gradual and low until the ninth day of storage. The values of AT increased along the experimental period being superior for T1 and T2. The increase of SS during the storage of the fresh-cut squash went smaller for T3 and T4. The brightness stayed during the storage being superior for T5, already the color components red and yellow decreased along the experimental period.

Aplicação de calcário e culturas de cobertura na implantação do sistema plantio direto em cerrado

Este estudo objetivou avaliar a correção do solo no estabelecimento do sistema plantio direto em Latossolo Vermelho localizado em região típica de Cerrado, Selvíria - MS. Os tratamentos consistiram em cinco formas de aplicação de calagem, em dose única ou parcelada, e duas culturas de cobertura. A calagem sem incorporação, independentemente do modo de aplicação, corrigiu a acidez do solo e aumentou os teores de Ca e Mg na camada de 0-0,05 m; nas demais profundidades, não houve alterações significativas desses atributos. A incorporação do calcário na camada de 0-0,2m modificou, uniformemente, os valores de pH, Ca, Mg e soma de bases do solo até à profundidade de 0,2 m. O sorgo como cultura de cobertura possibilitou maiores teores de Ca e Mg quando a dose de calcário foi subdividida em três aplicações.

Influência da disponibilidade hídrica e da acidez do solo no teor de prolina livre de guandu

O objetivo deste trabalho foi avaliar a influência da disponibilidade hídrica e da acidez do solo, no teor de prolina livre da parte aérea das cultivares de guandu, IAPAR 43-Aratã e IAC Fava Larga. O delineamento experimental utilizado foi o inteiramente casualizado, em arranjo fatorial 2x3x4 (cultivar x disponibilidade hídrica x acidez), com quatro repetições. em condições de restrição hídrica severa, a cultivar IAC Fava Larga pode ser considerada tolerante, em virtude do maior acúmulo de prolina livre. A presença de alumínio no solo, associada à restrição hídrica severa, apresentou efeito sinergístico sobre os teores de prolina livre.

Indicadores fisiológicos da interação entre deficit hídrico e acidez do solo em cana-de-açúcar

O objetivo deste trabalho foi avaliar os indicadores fisiológicos da interação entre deficit hídrico e acidez do solo em plantas jovens de cana-de-açúcar. As plantas foram submetidas a três tratamentos de disponibilidade hídrica, medidos em percentagem de capacidade de campo (CC) - sem estresse (70% CC), estresse moderado (55% CC) e estresse severo (40% CC); e três tratamentos de acidez no solo, medidos em termos de saturação por bases (V) - baixa acidez (V = 55%), média acidez (V = 33%) e alta acidez (V = 23%). O experimento foi realizado em casa de vegetação a 29,7±4,3ºC e 75±10% UR. O delineamento experimental utilizado foi o de blocos ao acaso, em esquema fatorial 3x3, com quatro repetições. Após 60 dias, foram determinados os teores de solutos compatíveis - trealose, glicina betaína e prolina - na folha diagnóstico e o crescimento inicial da parte aérea. Os solutos compatíveis trealose, glicina betaína e prolina são indicadores do efeito da interação dos estresses hídrico e ácido no solo. O acúmulo dos solutos compatíveis nos tecidos foliares das plantas não é capaz de impedir a redução na produção de matéria seca da cana-de-açúcar, resultante do agravamento nas condições de disponibilidade hídrica e de acidez no solo.

Efeito simultâneo da deficiência hídrica e do alumínio tóxico no solo na cultivar IAC91-5155 de cana-de-açúcar

Sugarcane is a very important economic crop in Brazil. The effects of abiotic stresses cause negative reduction of the productivity in the sugarcane industry. In order to identify indicators of stresses tolerance, two physiological variables were evaluated, nitrate reductase activity and chlorophyll contents in young plants of sugarcane, cv. IAC91-5155. The simultaneous effect of abiotic stresses of high occurrence in Brazilian soils are, water deficiency and aluminum toxicity. The plants were submitted to three treatments of water availability (% field capacity, FC): no stress (70% FC), moderate stress (55% FC), and extreme stress (40% FC); and three acidity treatments in the soil (base saturation, V%): no acidity (V=55%), average acidity (V=33%), and high acidity (V=23%). The experiment was carried out in greenhouse, with 29.7 +/- 4.3 degrees C and 75 +/- 10% RH. The experimental design was in randomized blocks, in 3x3 factorial arrangement, with four replicates. After 60 days, nitrate reductase activity and chlorophyll contents were evaluated in the diagnostic leaf. The results demonstrate that the response of plants to a combination of drought and aluminum toxicity, similar to the conditions in many natural environments, is different from the response of plants to each of these stresses applied individually, as typically tested in the laboratory. The nitrate reductase activity can be used as a biochemical-physiological marker of water deficiency while chlorophyll contents can be used as a biochemical-physiological marker of both of them, water deficiency or aluminum toxicity in soil. Both parameters can not be as a biochemical-physiological marker for acclimation of young plants of sugarcane cv. IAC91-5155, under the combined stresses.

Effect of citrus sudden death on yield and quality of sweet orange cultivars in Brazil

Citrus sudden death (CSD) has greatly affected sweet orange cultivars grafted on Rangpur lime in São Paulo and Minas Gerais States, Brazil. To characterize and quantify CSD damage, fruit yield and quality were assessed in each combination of sweet orange cultivar (Hamlin, Pera, Natal, and Valencia), age class (3 to 5, 6 to 10, and 11 to 15 years old), and CSD severity class (0 = no symptom, 1 = initial symptoms, and 2 = severe symptoms). For each combination, 10 trees were harvested and 20 fruit were taken for quality analysis. Damage was characterized by reduc_ tion of: (i) total weight of fruit/tree (36 and 67% for severity class 1 and 2, respectively), (ii) number of fruit/tree (27 and 55%), (iii) fruit size (13 and 25% in diameter and height [stem to styler distance]), (iv) fruit weight (32 and 56%), (v) total soluble solids (TSS)/fruit (18 and 42%), and increase of (vi) Brix (14 and 34%), (vii) acidity (16 and 41%), and (viii) TSS/90-1b. box (21 and 33%). There was no alteration on Brix/acidity ratio and percentage of juice on fruit of affected trees. Sweet orange cultivars did not differ in percentage of reduction or increase of all yield and quality variables, with the exception of Pera, which expressed increases of Brix and acidity. For more severe affected trees, the youngest plants showed a higher reduction in fruit number/tree, whereas plants 6 to 10 years old showed a higher increase in fruit acidity and TSS/box. However, no differences in percentage of reduction or increase for other variables were observed among different age classes. The damage to the above probably was associated with reduced water absorption capacity of CSD-affected trees.

Concentração de potássio na solução nutritiva e a qualidade e número de frutos de melão por planta em hidroponia

O experimento foi conduzido em hidroponia (NFT) no período de junho a novembro de 2001, na FCAV-UNESP em Jaboticabal-SP, situada a 21º15 22 Sul, 48º18 58 Oeste, e altitude de 575 metros. O híbrido Bônus n0 2 foi cultivado em blocos casualizados, em esquema de parcelas subdivididas, com seis repetições. Os elementos avaliados foram número de frutos por planta (2, 3, 4 e fixação livre) e concentração de potássio na solução nutritiva (66; 115,5; 165 e 247,5mg L-1). O experimento teve como objetivo avaliar a concentração de potássio na solução nutritiva e número de frutos por planta sobre a qualidade dos frutos do meloeiro. Concentrações maiores do que 66mg L-1 de potássio na solução nutritiva não promoveram incrementos nas características de qualidade dos frutos do meloeiro como: teor de sólidos solúveis médio de todos os frutos da planta, do segundo fruto, da acidez total titulável média de todos os frutos da planta, do primeiro fruto, do segundo fruto, do índice de maturação, da espessura da polpa e do índice de formato dos frutos. Frutos oriundos de plantas de melão com dois frutos apresentaram maior teor de sólidos solúveis e acidez total titulável, independente da concentração de potássio na solução nutritiva. O maior número de frutos por planta reduziu a espessura do mesocarpo dos frutos.

Variabilidade fenotípica em genótipos de acerola

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)