Thermodynamic analysis of direct steam reforming of ethanol in molten carbonate fuel cell

Fuel cell as molten carbonate fuel cell (MCFC) operates at high temperatures. Thus, cogeneration processes may be performed, generating heat for its own process or for other purposes of steam generation in the industry. The use of ethanol is one of the best options because this is a renewable and less environmentally offensive fuel, and is cheaper than oil-derived hydrocarbons, as in the case of Brazil. In that country, because of technical, environmental, and economic advantages, the use of ethanol by steam reforming process has been the most investigated process. The objective of this study is to show a thermodynamic analysis of steam reforming of ethanol, to determine the best thermodynamic conditions where the highest volumes of products are produced, making possible a higher production of energy, that is, a more efficient use of resources. To attain this objective, mass and energy balances were performed. Equilibrium constants and advance degrees were calculated to get the best thermodynamic conditions to attain higher reforming efficiency and, hence, higher electric efficiency, using the Nernst equation. The advance degree (according to Castellan 1986, Fundamentos da Fisica/Quimica, Editora LTC, Rio de Janeiro, p. 529, in Portuguese) is a coefficient that indicates the evolution of a reaction, achieving a maximum value when all the reactants' content is used of reforming increases when the operation temperature also increases and when the operation pressure decreases. However, at atmospheric pressure (1 atm), the advance degree tends to stabilize in temperatures above 700 degrees C; that is, the volume of supplemental production of reforming products is very small with respect to high use of energy resources necessary. The use of unused ethanol is also suggested for heating of reactants before reforming. The results show the behavior of MCFC. The current density, at the same tension, is higher at 700 degrees C than other studied temperatures such as 600 and 650 degrees C. This fact occurs due to smaller use of hydrogen at lower temperatures that varies between 46.8% and 58.9% in temperatures between 600 and 700 degrees C. The higher calculated current density is 280 mA/cm(2). The power density increases when the volume of ethanol to be used also increases due to higher production of hydrogen. The highest produced powers at 190 mA/cm(2) are 99.8, 109.8, and 113.7 mW/cm(2) for 873, 923, and 973 K, respectively. The thermodynamic efficiency has the objective to show the connection among operational conditions and energetic factors, which are some parameters that describe a process of internal steam reforming of ethanol.

Collider aspects of flavor physics at high Q

This chapter of the "Flavor in the era of LHC" workshop report discusses flavor-related issues in the production and decays of heavy states at the LHC at high momentum transfer Q, both from the experimental and the theoretical perspective. We review top quark physics, and discuss the flavor aspects of several extensions of the standard model, such as supersymmetry, little Higgs models or models with extra dimensions. This includes discovery aspects, as well as the measurement of several properties of these heavy states. We also present publicly available computational tools related to this topic.

Modeling and Experimental Aspects of Self-healing Bolted Joint through Shape Memory Alloy Actuators

Bolted joints are a form of mechanical coupling largely used in machinery due to their reliability and low cost. Failure of bolted joints can lead to catastrophic events, such as leaking, train derailments, aircraft crashes, etc. Most of these failures occur due to the reduction of the pre-load, induced by mechanical vibration or human errors in the assembly or maintenance process. This article investigates the application of shape memory alloy (SMA) washers as an actuator to increase the pre-load on loosened bolted joints. The application of SMA washer follows a structural health monitoring procedure to identify a damage (reduction in pre-load) occurrence. In this article, a thermo-mechanical model is presented to predict the final pre-load achieved using this kind of actuator, based on the heat input and SMA washer dimension. This model extends and improves on the previous model of Ghorashi and Inman [2004, "Shape Memory Alloy in Tension and Compression and its Application as Clamping Force Actuator in a Bolted Joint: Part 2 - Modeling," J. Intell. Mater. Syst. Struct., 15:589-600], by eliminating the pre-load term related to nut turning making the system more practical. This complete model is a powerful but complex tool to be used by designers. A novel modeling approach for self-healing bolted joints based on curve fitting of experimental data is presented. The article concludes with an experimental application that leads to a change in joint assembly to increase the system reliability, by removing the ceramic washer component. Further research topics are also suggested.

Injuries caused by scorpionfishes and (Scorpaena plumieri Bloch, 1789 Scorpaena brasiliensis Cuvier 1829) in the Southwestern Atlantic Ocean (Brazilian coast): epidemiologic, clinic and therapeutic aspects of 23 stings in humans

Fishes of the family Scorpaenidae are responsible for severe injuries and occasionally deaths in humans around the world. The more venomous fishes on the Brazilian coast and in the Southwestern Atlantic region are classified in the genus Scorpaena (family Scorpaenidae). However, there are few studies on the venomous apparatus, the effects of the venom, or clinical aspects of human envenoming provoked by Atlantic scorpionfishes.In this communication, the authors present 23 accidents caused by scorpionfishes of the genus Scorpaena among fishermen, and report the species that provoked the injuries, the circumstances of contacts, the clinical aspects observed and the therapeutic measures utilized for control of the symptoms of the victims. The intense pain and the systemic findings observed in the patients were very frequent and we think that the injuries provoked by scorpionfishes should be considered the most important manifestations caused by venomous fishes of the East Atlantic Ocean. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Clinical and histopathological aspects of the insect bite hypersensitivity in horses

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Clinical aspects of experimental peritonitis in horses

Dezesseis eqüinos adultos foram distribuídos aleatoriamente em 4 grupos (GI, GII, GIII e GIV), constituídos por quatro animais, recebendo cada grupo o seguinte inóculo por via intraperitoneal: GI (100 X 10(7) unidades formadoras de colônia (UFC) de Escherichia coli diluídos em 500ml de salina 0,9%); GII (100 X 10(7) UFC de Bacteroides fragilis diluídos em 500ml de salina 0,9%); GIII (100 X 10(7) UFC de E. coli associados a 100 X 10(7) UFC de B. fragilis diluídos em 500ml de salina 0,9%); GIV (testemunho - 500ml de salina 0,9%). Aumento da sensibilidade e tensão da parede abdominal, diarréia, diminuição dos sons intestinais e aumento da freqüência cardíaca foram os sinais mais freqüentemente observados nos eqüinos inoculados com cepas bacterianas. Eqüinos inoculados com culturas puras de E. coli ou B. fragilis apresentaram peritonites brandas e autolimitantes, enquanto que os inoculados com a associação dessas bactérias apresentaram sinais de maior intensidade e duração.

Epidemiological aspects of rheumatoid arthritis patients affected by oral bisphosphonate-related osteonecrosis of the jaws

This literature review aims to evaluate the epidemiologic profile of patients with rheumatoid arthritis (RA) that developed a bisphosphonate-related osteonecrosis that affect the jaws (BRONJ), including demographic aspects, as well as clinical and therapeutic issues. A search of PUBMED/MEDLINE, Scopus, and Cochrane databases from January 2003 to September 2011 was conducted with the objective of identifying publications that contained case reports regarding oral BRONJ in RA patients. Patients with RA who develop oral BRONJ are usually women above 60 years taking steroids and long-term alendronate. Most of them have osteoporosis, and lesions, triggered by dental procedures, are usually detected at stage II in the mandible. Although there is no accepted treatment protocol, these patients seem to have better outcomes with conservative approaches that include antibiotic therapy, chlorhexidine, and drug discontinuation.

Ultrastructural aspects of the retractor ocular bulbi muscle in the opossum (Didelphis albiventris)

In the present study the different types of muscle fibers of the retractor ocular bulbi muscle of the South American opossum were classified according to their ultrastructural characteristics. The tridimensional characteristics of the neuromuscular junctions present: in this muscle were also demonstrated by scanning electron microscopy (SEM). Five adult opossums, three males and two females, were perfused with fixative solution through the left ventricle and their right retractor ocular bulbi muscle was prepared for the ultrastructural study of muscle fibers. The contralateral muscle was used for the study of neuromuscular junctions by SEM. Three types of fibers were detected, denoted 1r, 2r and 3r. Only simple neuromuscular junctions of the plate type were visualized by SEM.

Structural and Ultrastructural Aspects of Folliculogenesis in Didelphis albiventris, the South-American Opossum

The ovarian histology, the structural and the ultrastructural characteristics of the folliculogenesis in Didelphis albiventris were described in detail. Recent studies suggest that methatherian mammals have unusual reproductive cycle but there are few informations regarding the marsupials reproductive life. Despite of the opossum folliculogenesis pattern resembles methatherian and eutherian pattern in many aspects, the analysis shows some peculiar features of the oocyte structure and ultrastructure that make available new data on the reproductive biology of marsupials.

Structural and ultrastructural aspects of ontogenesis and differentiation of resin secretory cavities in Hymenaea stigonocarpa (Fabaceae-Caesalpinioideae) leaves

Cell lysis in the formation of secretory cavities in plants has been questioned by some authors and considered as result of technical artifacts. To describe the formation of secretory resin cavities in Hymenaea stigonocarpa leaves, leaflet samples at different stages of differentiation were collected, fixed, and processed for light and electron microscopy as per usual methods. The initial cells of secretory resin cavities are protodermal and grow towards the mesophyll ground meristem; these cells then divide producing cell groups that are distinguished by the shape and arrangement of cytoplasm, and density. At the initial stages of differentiation of the secretory cavities, some central cells in these groups show dark cytoplasm and condensed nuclear chromatin. Later, there is cell wall loosening, tonoplast and plasmalemma rupture resulting in cell death. These cells, however, maintain organelle integrity until lysis, when the cell wall degrades and the plasmalemma ruptures, releasing protoplast residues, marked characteristics of programmed cell death. The secretory epithelium remains active until complete leaf expansion when the cavity is filled with resin and the secretory activity ceases. There are no wall residues between central cells in adult cavities. Our results demonstrate lysigeny and the importance of ontogenetic studies in determining the origin of secretory cavities.

Functional aspects of floral nectar secretion of Ananas ananassoides, an ornithophilous bromeliad from the Brazilian savanna

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Neuroendocrine and reproductive aspects of adult male rats exposed neonatally to an antiestrogen

The present study was designed to investigate the effects of a single dose of an estrogen antagonist-clomiphene-during neonatal life, on later neuroendocrine system and reproductive performance. Immediately after birth, male pups received clomiphene citrate (s.c.). At adulthood, although testosterone levels and wet weights of reproductive organs were not altered, the treatment induced an increased number of spermatozoa and a delay in the transit time in the cauda epididymis. Additionally, there was impairment of sexual behavior evidenced by a delay in the latencies to the first mount and first intromission. Treated rats also showed decreased dopaminergic and serotonergic neurotransmissions in the hypothalamus and decreased dopaminergic neurotransmission in the striatum. The decreased dopaminergic activity could be related to the lower sexual motivation observed. These results indicate the necessity of preventing exposure to drugs that may impair sexual differentiation, which can compromise later mating success as well as the capacity to generate descendants. (c) 2006 Elsevier B.V. All rights reserved.

Ultrastructural aspects of oogenesis and oocyte primary growth in Serrasalmus spilopleura (Teleostei, Characiformes, Characidae)

The ultrastructural characteristics of the organelles present in Serrasalmus spilopleura oogonia and oocytes undergoing primary growth were described in detail, considering its role in the nuclear and cytoplasmic metabolic processes that occur in these cell types. Even though these cells do not significantly differ from those similar to them that are found in other teleost groups, the analysis of their ultrastructure makes available new data on the reproductive biology of Characiformes. (C) 2001 Harcourt Publishers Ltd.

Morphological aspects of cluster formation in the germarium of the sugarcane borer Diatraea saccharalis Fabricius (Lepidoptera : Pyralidae)

Diatraea saccharalis F. is one of the greatest pests of the sugar cane culture. This report aimed to characterize the germanium region of the sugarcane borer by light and transmission electron microscopy, emphasizing the morphological steps of the ovarian cluster formation. In the germanium of this insect, four zones could be morphologically identified during the cluster formation. In the most apical end of each ovariole - Zone I - the germ line stem cells undergo complete mitotic division, originating the cystoblasts. In the Zone II, each cystoblast produces a group of eight cells, the cystocytes, which are interconnected by the ring canals. Clusters containing all the cystocytes in the meiosis, characterizes the Zone III. Germ cells with ultrastructural features of apoptosis are also detected in this Zone. In the Zone IV the cystocytes differentiate, morphologically, into one oocyte and seven nurse cells. Interstitial somatic cells and pre-follicle cells exhibit, in their cytoplasm, heterogeneous vacuoles containing degenerated cellular fragments, characterized as apoptotic bodies. Our results pointed out to the morphological evidences related with important control mechanisms for new clusters/follicles production and for the cellular arrangement into the germanium, resulting from the programmed cell death. We believe that the morphological characterization of ovarian cluster formation in D. saccharalis provided valuable information for the understanding of the initial steps of oogenesis and contributed for the knowledge of the cellular mechanisms related with the oocyte production and with reproduction in insects.