Estudo da remoção de compostos orgânicos, benzeno e tolueno, em solução aquosa por processo oxidativo avançado do tipo Fenton

The oil and petrochemical industry is responsable to generate a large amount of waste and wastewater. Among some efluents, is possible find the benzene, toluene, ethilbenze and isomers of xilenes compounds, known as BTEX. These compounds are very volatily, toxic for environment and potencially cancerigenous in man. Oxidative advanced processes, OAP, are unconventional waste treatment, wich may be apply on treatment and remotion this compounds. Fenton is a type of OAPs, wich uses the Fenton s reactant, hydrogen peroxide and ferrous salt, to promove the organic degradation. While the Photo-Fenton type uses the Fenton s reactant plus UV radiation (ultraviolet). These two types of OAP, according to literature, may be apply on BTEX complex system. This project consists on the consideration of the utilization of technologies Fenton and Photo-Fenton in aqueous solution in concentration of 100 ppm of BTEX, each, on simulation of condition near of petrochemical effluents. Different reactors were used for each type of OAP. For the analyticals results of amount of remotion were used the SPME technique (solid phase microextraction) for extraction in gaseous phase of these analytes and the gas chromatography/mass espectrometry The arrangement mechanical of Photo-Fenton system has been shown big loss by volatilization of these compounds. The Fenton system has been shown capable of degradate benzene and toluene compounds, with massic percentage of remotion near the 99%.

Atributos físicos e químicos de substratos compostos por biossólidos e casca de arroz carbonizada

O objetivo deste trabalho foi estudar os atributos físicos e químicos de substratos com diferentes doses de biossólido (BIO) e de casca de arroz carbonizada (CAC), com vistas em obter um meio de crescimento adequado para o desenvolvimento de mudas. Desta forma, utilizando biossólido proveniente da SABESP, estação de Franca (SP), estabeleceu-se um ensaio com os seguintes tratamentos (proporções BIO/CAC): 100/0, 90/10, 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, 20/80, 10/90 e 0/100, os quais foram comparados ao substrato comercial Multiplant®. Foram realizadas análises para determinação dos atributos físicos, como: densidade aparente do substrato, macro e microporosidade, porosidade total, capacidade máxima de retenção de água, e dos atributos químicos dos substratos, como: teores totais de macro e micronutrientes, pH, relação C/N e condutividade elétrica. Com a elevação da dose de BIO no substrato houve aumento da densidade e do percentual de microporos e, conseqüentemente, da capacidade de retenção de água. O BIO apresentou teores razoáveis de nutrientes com destaque para N e P, mas baixos teores de K. Não foram detectados teores de metais pesados superiores aos limites estabelecidos pela Legislação Brasileira no biossólido usado. Comparando-se os valores considerados adequados para o desenvolvimento de mudas encontrados na literatura com os obtidos neste trabalho, encaixaram-se na faixa adequada os substratos cujas doses de biossólido variaram de 30 a 60 %. Nenhum substrato testado, incluindo o do tratamento com substrato comercial, apresentou valores ideais em todas as propriedades estudadas.

Desenvolvimento de um sistema foto-oxidativo visando aplicação no tratamento de águas produzidas em campos de petróleo

Increasing concern with the environment, in addition to strict laws, has induced the industries to find altenatives to the treatment of their wastes. Actually, the oil industry has sought solutions to overcome a big environmental problem, i.e., oil field produced water being discharged to the sea. These effluents have organic compounds dissolved, such as polycyclic aromatic hydrocarbons, phenols, benzene, toluene, ethylbenzene and xylenes (BTEX). These compounds are difficult to be removed and have high toxicity. The advanced oxidation processes - AOP are effective to degradation of these organic compounds, because they generate hydroxyl radicals with high potential of oxidation. This work includes the reactor photochemical development applied in the photodegradation treatment (by photo-Fenton process) of wastewaters containing organic compounds dissolved, aiming at treatment and recovery the oil field produced water. The studied reactor allowed the evaluation of two ultraviolet radiation sources that is the main factor to describe the feasibility of the photo¬Fenton treatment, i.e., sun and black light fluorescent lamps, and other relevant variables the process: concentration of reagents, irradiated area and also various reactor configurations to maximize the use of radiation. The organic matter degradation was verified with samples collected during the experimental and analyzed with a total organic carbon analyzer (TOC), which expressed the results in terms of mgC/L. The solar radiation was more effective than radiation from the lamps. it's an important factor for the operation costs cutting. Preliminary experiments applied to oil field produced water treatment have showed satisfactory results, reducing up to 76 % of organic matter

Desenvolvimento de um sistema foto-oxidativo visando aplicação no tratamento de águas produzidas em campos de petróleo

Increasing concern with the environment, in addition to strict laws, has induced the industries to find alternatives to the treatment of their wastes. Actually, the oil industry has sought solutions to overcome a big environmental problem, i.e., oil field produced water being discharged to the sea. These effluents have organic compounds dissolved, such as polycyclic aromatic hydrocarbons, phenols, benzene, toluene, ethylbenzene and xylenes (BTEX). These compounds are difficult to be removed and have high toxicity. The advanced oxidation processes - AOP are effective to degradation of these organic compounds, because they generate hydroxyl radicals with high potential of oxidation. This work includes the reactor photochemical development applied in the photodegradation treatment (by photo-Fenton process) of wastewaters containing organic compounds dissolved, aiming at treatment and recovery the oil field produced water. The studied reactor allowed the evaluation of two ultraviolet radiation sources that is the main factor to describe the feasibility of the photo- Fenton treatment, i.e., sun and black light fluorescent lamps, and other relevant variables the process: concentration of reagents, irradiated area and also various reactor configurations to maximize the use of radiation. The organic matter degradation was verified with samples collected during the experimental and analyzed with a total organic carbon analyzer (TOC), which expressed the results in terms of mgC/L. The solar radiation was more effective than radiation from the lamps. It's an important factor for the operation costs cutting. Preliminary experiments applied to oil field produced water treatment have showed satisfactory results, reducing up to 76 % of organic matter

Avaliação e modelagem da absorção de H2S do gás natural em coluna de leito estagnado

Natural gas, although basically composed by light hydrocarbons, also presents contaminant gases in its composition, such as CO2 (carbon dioxide) and H2S (hydrogen sulfide). The H2S, which commonly occurs in oil and gas exploration and production activities, causes damages in oil and natural gas pipelines. Consequently, the removal of hydrogen sulfide gas will result in an important reduction in operating costs. Also, it is essential to consider the better quality of the oil to be processed in the refinery, thus resulting in benefits in economic, environmental and social areas. All this facts demonstrate the need for the development and improvement in hydrogen sulfide scavengers. Currently, the oil industry uses several processes for hydrogen sulfide removal from natural gas. However, these processes produce amine derivatives which can cause damage in distillation towers, can cause clogging of pipelines by formation of insoluble precipitates, and also produce residues with great environmental impact. Therefore, it is of great importance the obtaining of a stable system, in inorganic or organic reaction media, able to remove hydrogen sulfide without formation of by-products that can affect the quality and cost of natural gas processing, transport, and distribution steps. Seeking the study, evaluation and modeling of mass transfer and kinetics of hydrogen removal, in this study it was used an absorption column packed with Raschig rings, where the natural gas, with H2S as contaminant, passed through an aqueous solution of inorganic compounds as stagnant liquid, being this contaminant gas absorbed by the liquid phase. This absorption column was coupled with a H2S detection system, with interface with a computer. The data and the model equations were solved by the least squares method, modified by Levemberg-Marquardt. In this study, in addition to the water, it were used the following solutions: sodium hydroxide, potassium permanganate, ferric chloride, copper sulfate, zinc chloride, potassium chromate, and manganese sulfate, all at low concentrations (»10 ppm). These solutions were used looking for the evaluation of the interference between absorption physical and chemical parameters, or even to get a better mass transfer coefficient, as in mixing reactors and absorption columns operating in counterflow. In this context, the evaluation of H2S removal arises as a valuable procedure for the treatment of natural gas and destination of process by-products. The study of the obtained absorption curves makes possible to determine the mass transfer predominant stage in the involved processes, the mass transfer volumetric coefficients, and the equilibrium concentrations. It was also performed a kinetic study. The obtained results showed that the H2S removal kinetics is greater for NaOH. Considering that the study was performed at low concentrations of chemical reagents, it was possible to check the effect of secondary reactions in the other chemicals, especially in the case of KMnO4, which shows that your by-product, MnO2, acts in H2S absorption process. In addition, CuSO4 and FeCl3 also demonstrated to have good efficiency in H2S removal

Estudo da influência de tratamentos químicos da fibra de sisal nas propriedades de compósitos com borracha nitrílica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aditivos de formulação na formação de filmes isolados de etilcelulose. estudos físico-químicos e morfológicos

Formulation Additives on Formation of Films isolated from Ethylcellulose. Physicochemical and Morphological Studies. In this work were developed free films from Surelease (R), additives alpha-GOS (alfa-glucooligosaccharide) and/or Tween (R) 80 in aqueous solution. It was obtained by Teflon plates casting process. The free films were characterized by thermal analysis (DSC and TGA), infrared spectroscopy (FTIR-ATR) and scanning electron microscopy (SEM). DSC and TO analysis showed that the additives do not influenced in the thermal stability of Surelease (R) films. SEM analysis observed homogeneous morphological characteristics and phase detachment absence. FTIR-ATR spectra were used to confirm the physical mixture between the components of films.

Aspectos sensoriais e físico-químicos de “iogurtes” de soja com espessantes/estabilizantes a base de fécula de inhame (Dioscorea alata), amido modificado e gelatina

This study had as objective to evaluate the effect of yam starch, modified starch from Cargill-Brasil (Amidomax 4800 (R)) and gelatin from Gelita-Brasil (GEL-LAC) as stabilizers/thickeners in different ratios and combinations in the soy yoghurt fermented with Enterococcus faecium and Lactobacillus helveticus ssp jugurti. Ten soy yoghurt formulations containing these different stabilizers/thickeners, always totalizing 0.5% in relation to the final formulation, were analyzed in sensorial and physical-chemical terms. Based on the observed results, it was concluded in relation to the sensorial point of view that the more appropriate product was processed only with gelatin at 0.5% concentration. This product also presented the best physical-chemical results related to consistency, syneresis and water holding capacity. However, the isolated use of gelatin increased fermentation time of the soy yoghurt.

Análise da aceitação de aguardentes de cana por testes afetivos e mapa de preferência interno

A aceitação de 11 amostras de aguardentes de cana envelhecidas e não envelhecidas foi avaliada por testes sensoriais afetivos e análises estatísticas uni e multivariada. As aguardentes estudadas compreenderam seis amostras comerciais de diferentes marcas, (sendo três não envelhecidas e três envelhecidas) e ainda outras cinco amostras correspondentes a zero, 12, 24, 36 e 48 meses de envelhecimento em um tonel de carvalho de 200L. As amostras foram avaliadas por 100 provadores consumidores do produto, recrutados por questionário de avaliação quanto à afetividade. Para os testes afetivos foi utilizada escala hedônica não estruturada de 9cm, sendo os dados obtidos avaliados por dois métodos estatísticos distintos: o Mapa de Preferência Interno (MDPREF) e a análise de variância univariada (ANOVA) com comparação de médias pelo teste de Tukey e análise de correlação. As amostras de aguardente envelhecidas por 12, 36 e 48 meses obtiveram maior aceitação, com médias ao redor de 7,0 na escala hedônica. A amostra com menor aceitação foi a correspondente ao tempo zero de envelhecimento (controle). As demais amostras obtiveram aceitação intermediária. A análise por MDPREF gerou em espaço multidimensional (onde as variações com relação aos dados de preferência foram extraídas em eixos ortogonais e para cada dimensão de preferência), coordenadas relativas aos produtos, que foram geradas em função da resposta dos consumidores. Os dados de aceitação de cada provador foram utilizados para o desenvolvimento de vetores individuais de preferência, resultando na construção de um mapa mutidimensional das amostras, em função dos dados de aceitação. No presente estudo o MDPREF foi gerado pelas primeira e segunda dimensões de preferência, as quais explicaram em conjunto 89,83% das variações observadas entre as amostras com relação à aceitação. O MDPREF confirmou os resultados da ANOVA, indicando uma maior preferência dos provadores pelas amostras de aguardentes envelhecidas. Os resultados sugerem também que aguardentes envelhecidas por mais de 24 meses em tonel de carvalho de 200L são preferidas pelos consumidores, em detrimento das comerciais não envelhecidas e mesmo das comerciais envelhecidas, que podem ser adicionadas de aguardente não envelhecida (processo denominado corte) e também ter correção da cor, conforme permite a Legislação Brasileira. O conteúdo de polifenóis totais e a intensidade de cor também foram determinados, e ambos apresentaram correlação linear positiva significativa (p<=0,05) com o aumento do tempo de envelhecimento das amostras.

Acelaração do universo e criação gravitacional de matéria escura fria: novos modelos e testes observacionais

Recent astronomical observations (involving supernovae type Ia, cosmic background radiation anisotropy and galaxy clusters probes) have provided strong evidence that the observed universe is described by an accelerating, flat model whose space-time properties can be represented by the FriedmannRobertsonWalker (FRW) metric. However, the nature of the substance or mechanism behind the current cosmic acceleration remains unknown and its determination constitutes a challenging problem for modern cosmology. In the general relativistic description, an accelerat ing regime is usually obtained by assuming the existence of an exotic energy component endowed with negative pressure, called dark energy, which is usually represented by a cosmological constant ¤ associated to the vacuum energy density. All observational data available so far are in good agreement with the concordance cosmic ¤CDM model. Nevertheless, such models are plagued with several problems thereby inspiring many authors to propose alternative candidates in the relativistic context. In this thesis, a new kind of accelerating flat model with no dark energy and fully dominated by cold dark matter (CDM) is proposed. The number of CDM particles is not conserved and the present accelerating stage is a consequence of the negative pressure describing the irreversible process of gravitational particle creation. In order to have a transition from a decelerating to an accelerating regime at low redshifts, the matter creation rate proposed here depends on 2 parameters (y and ߯): the first one identifies a constant term of the order of H0 and the second one describes a time variation proportional to he Hubble parameter H(t). In this scenario, H0 does not need to be small in order to solve the age problem and the transition happens even if there is no matter creation during the radiation and part of the matter dominated phase (when the ß term is negligible). Like in flat ACDM scenarios, the dimming of distant type Ia supernovae can be fitted with just one free parameter, and the coincidence problem plaguing the models driven by the cosmological constant. ACDM is absent. The limits endowed with with the existence of the quasar APM 08279+5255, located at z = 3:91 and with an estimated ages between 2 and 3 Gyr are also investigated. In the simplest case (ß = 0), the model is compatible with the existence of the quasar for y > 0:56 whether the age of the quasar is 2.0 Gyr. For 3 Gyr the limit derived is y > 0:72. New limits for the formation redshift of the quasar are also established

Parâmetros físico-químicos de estrelas nos campos de exoplanetas do satélite corot

A rotação estelar é um dos mais importantes observáveis da evolução estelar. Neste sentido, o satélite CoRoT representa uma oportunidade única de medir os períodos rotacionais para uma amostra de estrelas estatisticamente robusta, oferecendo dados absolutamente necessários para o estudo da rotação e seu papel na evolução estelar. Para conseguir isto, um passo fundamental é a caracterização física e química das estrelas observadas pelo CoRoT, especificamente devido ao fato de que o cálculo de períodos rotacionais confiáveis é um trabalho difícil sem a ajuda dos parâmetros estelares. Desta forma, foi elaborado um importante seguimento observacional das estrelas nos campos do CoRoT do anticentro LRa01 e do centro LRc01, permitindo a correta identificação dos períodos que reflitam a modulação rotacional. Nesta tese de doutorado são apresentados os resultados de tal seguimento. Parâmetros físicos e químicos, tais como temperatura efetiva Teff , gravidade superficial log(g), velocidade de microturbulência Vmic, abundância de ferro [Fe/H], velocidade de rotação projetada Vsin(i), e abundância de lítio A(Li) são apresentados para uma amostra de 116 estrelas dos campos CoRoT. Elas se encontram em diferentes estágios evolutivos, desde a sequência principal (SP) até o ramo das gigantes vermelhas (GV). As observações foram feitas utilizando os espectrógrafos UVES (VLT) e HYDRA (CTIO). Para a derivação de tais parâmetros foram utilizados o programa TurboSpectrum e os modelos de atmosfera de MARCS. Paralelamente, velocidades rotacionais Vsin(i) foram obtidas a partir do ajuste dos perfis observados e sintéticos das linhas de ferro e por meio de uma calibração de função de correlação cruzada (CCF). Períodos rotacionais Prot para 77 estrelas da amostra foram obtidos a partir das curvas de luz do satélite CoRoT. Extensas tabelas destes parâmetros e seus respectivos erros são apresentadas. Foram encontradas diferenças nas distribuições de Teff , [Fe/H] e estágios evolutivos entre os diferentes campos do CoRoT, indicando possíveis efeitos de seleção na amostra, assim como a existência de diferentes populações estelares do disco Galáctico. Por outro lado, o comportamento rotacional e as abundâncias de lítio não apresentam diferenças entre estrelas de parâmetros físicos similares, mas que pertencem a diferentes campos do CoRoT. A partir da análise de temperaturas, foi encontrada uma maior extinção por avermelhamento para estrelas do CoRoT localizadas no campo LRc01, assim como um gradiente deste valor em função da distância. Os resultados mostram que as abundâncias de lítio, as velocidades de rotação e os períodos rotacionais apresentam o mesmo comportamento descrito na literatura. Por outro lado, é apresentada pela primeira vez a relação que existe entre o lítio e o período de rotação em diferentes estágios evolutivos, mostrando, tal como era esperado, que ambas as grandezas possuem uma anticorrelação. Também é apresentada a evolução simultânea da rotação e do lítio, e foram calculadas relações que permitem obter valores médios de A(Li) como função da temperatura efetiva e do período rotacional. Os dados apresentados nesta tese de doutorado representam um importante ponto de partida para serem utilizados como uma amostra de calibração para diferentes programas no contexto da missão do satélite CoRoT, uma vez que a lista de estrelas aqui analisadas são parte das mais brilhantes que compõem o campo Exo do CoRoT

Testes cinemáticos em cosmologia com decaimento do vácuo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Análise em conjunta de testes cosmológicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Desempenho de pacientes com acidente vascular encefalico em testes de reconhecimento de tividades de vida diaria com frequencia autocontrolada e pre- determinada Luciana Protásio de Melo Natal 2009

The stimulation of motor learning is an important component to a rehabilitation and type of practice used is de basic importance to Physiotherapy. The motor skills are the types more basic of behavior that subjects must acquire throughout its lives and observational learning one of forms for its acquisition. Objective: This study aimed to compare performance of patients post- stroke on test of recognition of activities of day life using self-controlled and externally determined practice. Intervention: Forty subjects had been evaluated, 20 stroke patients (the mean age was 57,9?}6,7 years, schooling 6,7?}3,09 years and time of injury 23,4?}17,2 months) and 20 health subjects (the mean age 55,4?}5,9 years and schooling 8?}3,7 years). All was evaluated about independence functional (FIM) and cognitive state (MMSE), and patients were also evaluated about neurologic state (NIHSS). Later, all realized a recognition of activities of day life test (drink water and speak to telephone) on self-controlled (PAUTO and CAUTO) and externally determined (P20 and C20) frequency. The stroke subjects also were examined for a three-dimensional system of kinematic analysis, when they have drink water. The statistic analysis was realized for chi-square and t Student tests. Results: This was not difference, about number of rightness, between groups of self-controlled and externally determined practice (p0,005), and also not between patients and control groups (p0,005). Patients mean velocity (PAUTO: 141,1mm/sec and P20: 141,6mm/sec) and peak velocity (PAUTO: 652,1mm/sec and P20: 598,6mm/sec) were reduced, as well as the angles reached for elbow (PAUTO: 66,60 and 124,40; P20: 66,30 and 128,50 extension e flexion respectively) regarding literature. Conclusions: The performance on recognition of activities of day life test was similar between on self-controlled and externally determined frequency, showing both technique may be used to stimulate motor learning on chronic patients after stroke

Comparação das respostas fisiológicas entre diferentes testes funcionais em obesos

obesity affects rightly functional capacity diminishing the cardiovascular system efficiency and oxygen uptake (VO2). Field tests, such as, Incremental Shuttle Walking Test (ISWT) and Six Minute Walk Test (6MWT) has been employed as alternative of Cardiopulmonary Exercise Test (CPX), to functional assessing for conditions which transport of oxygen to peripheral is diminished. Nevertheless, the knowing about metabolic variables response in real time and it comparing among different maximal and submaximal tests in obese is absent. Aim: to compare cardiopulmonary, metabolic response during CPX, ISWT and 6MWT and to analyse it influence of adiposity markers in obese. Material e Method: crosssectional, prospective study. Obese included if: (BMI>30Kg/m2; FVC>80%), were assessed as clinical, anthropometric (BMI, body adiposity index-BAI, waist-WC, hip- HC and neck-NC circumferences) and spirometry (forced vital capacity-FVC, Forced expiratory volume-1°second-FEV1, maximal voluntary ventilation-MVV) variables. Obese performed the sequence of tests: CPX, ISWT and 6MWT. Throughout tests was assessed breath-by-breath by telemetry system (Cortex-Biophysik-Metamax3B) variables; oxygen uptake on peak of activity (VO2peak); carbon dioxide production (VCO2); Volume Expiratory (VE); ventilatory equivalents for VO2 (VE/VO2) and CO2 (VE/VCO2); respiratory exchange rate (RER) and perceived effort-Borg6-20). Results: 15 obese (10women) 39.4+10.1years, normal spirometry (%CVF=93.7+9.7) finished all test. They have BMI (43.5+6.6kg/m2) and different as %adiposity (BAI=50.0+10.5% and 48.8+16.9% respectively women and men). Difference of VO2ml/kg/min and %VO2 were finding between CPX (18.6+4.0) and 6MWT (13.2+2.5) but not between ISWT (15.4+2.9). Agreement was found for ISWT and CPX on VO2Peak (3.2ml/kg/min; 95%; IC-3.0 9.4) and %VO2 (16.4%). VCO2(l/min) confirms similarity in production for CPX (2.3+1.0) and ISWT (1.7+0.7) and difference for 6MWT (1.4+0.6). WC explains more the response of CPX and ISWT than other adiposity markers. Adiposity diminishes 3.2% duration of CPX. Conclusion: ISWT promotes similar metabolic and cardiovascular response than CPX in obese. It suggesting that ISWT could be useful and reliable to assess oxygen uptake and functional capacity in obese