Energy and delay trade-off of the GTS allocation mechanism in IEEE 802.15.4 for wireless sensor networks

The IEEE 802.15.4 protocol proposes a flexible communication solution for Low-Rate Wireless Personal Area Networks (LR-WPAN) including wireless sensor networks (WSNs). It presents the advantage to fit different requirements of potential applications by adequately setting its parameters. When in beaconenabled mode, the protocol can provide timeliness guarantees by using its Guaranteed Time Slot (GTS) mechanism. However, power-efficiency and timeliness guarantees are often two antagonistic requirements in wireless sensor networks. The purpose of this paper is to analyze and propose a methodology for setting the relevant parameters of IEEE 802.15.4-compliant WSNs that takes into account a proper trade-off between power-efficiency and delay bound guarantees. First, we propose two accurate models of service curves for a GTS allocation as a function of the IEEE 802.15.4 parameters, using Network Calculus formalism. We then evaluate the delay bound guaranteed by a GTS allocation and express it as a function of the duty cycle. Based on the relation between the delay requirement and the duty cycle, we propose a power-efficient superframe selection method that simultaneously reduces power consumption and enables meeting the delay requirements of real-time flows allocating GTSs. The results of this work may pave the way for a powerefficient management of the GTS mechanism in an IEEE 802.15.4 cluster.

On the choice of posittioning and cluster size for fixed relay stations in a LTE network

The long term evolution (LTE) is one of the latest standards in the mobile communications market. To achieve its performance, LTE networks use several techniques, such as multi-carrier technique, multiple-input-multiple-output and cooperative communications. Inside cooperative communications, this paper focuses on the fixed relaying technique, presenting a way for determining the best position to deploy the relay station (RS), from a set of empirical good solutions, and also to quantify the associated performance gain using different cluster size configurations. The best RS position was obtained through realistic simulations, which set it as the middle of the cell's circumference arc. Additionally, it also confirmed that network's performance is improved when the number of RSs is increased. It was possible to conclude that, for each deployed RS, the percentage of area served by an RS increases about 10 %. Furthermore, the mean data rate in the cell has been increased by approximately 60 % through the use of RSs. Finally, a given scenario with a larger number of RSs, can experience the same performance as an equivalent scenario without RSs, but with higher reuse distance. This conduces to a compromise solution between RS installation and cluster size, in order to maximize capacity, as well as performance.

A Wireless Mesh Network NS-3 Simulation Model: Implementation and Performance Comparison With a Real Test-Bed

Wireless mesh networks present an attractive communication solution for various research and industrial projects. However, in many cases, the appropriate preliminary calculations which allow predicting the network behavior have to be made before the actual deployment. For such purposes, network simulation environments emulating the real network operation are often used. Within this paper, a behavior comparison of real wireless mesh network (based on 802.11s amendment) and the simulated one has been performed. The main objective of this work is to measure performance parameters of a real 802.11s wireless mesh network (average UDP throughput and average one-way delay) and compare the derived results with characteristics of a simulated wireless mesh network created with the NS-3 network simulation tool. Then, the results from both networks are compared and the corresponding conclusion is made. The corresponding results were derived from simulation model and real-worldtest-bed, showing that the behavior of both networks is similar. It confirms that the NS-3 simulation model is accurate and can be used in further research studies.

The relation of body mass index and abdominal adiposity with dyslipidemia in 27 general populations of the WHO MONICA Project.

The association between adiposity measures and dyslipidemia has seldom been assessed in a multipopulational setting. 27 populations from Europe, Australia, New Zealand and Canada (WHO MONICA project) using health surveys conducted between 1990 and 1997 in adults aged 35-64 years (n = 40,480). Dyslipidemia was defined as the total/HDL cholesterol ratio >6 (men) and >5 (women). Overall prevalence of dyslipidemia was 25% in men and 23% in women. Logistic regression showed that dyslipidemia was strongly associated with body mass index (BMI) in men and with waist circumference (WC) in women, after adjusting for region, age and smoking. Among normal-weight men and women (BMI<25 kg/m(2)), an increase in the odds for being dyslipidemic was observed between lowest and highest WC quartiles (OR = 3.6, p < 0.001). Among obese men (BMI ≥ 30), the corresponding increase was smaller (OR = 1.2, p = 0.036). A similar weakening was observed among women. Classification tree analysis was performed to assign subjects into classes of risk for dyslipidemia. BMI thresholds (25.4 and 29.2 kg/m(2)) in men and WC thresholds (81.7 and 92.6 cm) in women came out at first stages. High WC (>84.8 cm) in normal-weight men, menopause in women and regular smoking further defined subgroups at increased risk. standard categories of BMI and WC, or their combinations, do not lead to optimal risk stratification for dyslipidemia in middle-age adults. Sex-specific adaptations are necessary, in particular by taking into account abdominal obesity in normal-weight men, post-menopausal age in women and regular smoking in both sexes.

Associations between area-level unemployment, body mass index, and risk factors for cardiovascular disease in an urban area

INTRODUCTION: Il existe peu d’évidences sur l’association entre le taux de chômage dans le milieu résidentiel (CR) et le risque de maladies cardiovasculaires parmi les résidents de milieux urbains. De plus, on ne sait pas si ce lien diffère entre les deux sexes. Cette thèse a pour objectif de déterminer la direction et la taille de l’association entre le CR et le risque de maladies cardiovasculaires, et d’examiner si cette association varie en fonction du sexe. MÉTHODES: Un sous-échantillon de 342 participants de l’Étude sur les habitudes de vie et la santé dans les quartiers montréalais a rapporté ses habitudes de vie et sa situation socio-économique. Des mesures biologiques et anthropométriques ont été recueillies par une infirmière. Le CR a été opérationnalisé en fonction d’une zone-tampon d’un rayon de 250 m centrée sur la résidence de chacun des participants à l’aide d’un Système d’Information Géographique (SIG). Des équations d’estimation généralisées ont été utilisées afin d’estimer l’association entre le CR et l’Indice de Masse Corporelle (IMC) et un score cumulatif de Risque Cardio-métabolique (RC) représentant la présence de valeurs élevées de cholestérol total, de triglycérides, de lipoprotéines de haute densité et d’hémoglobine glyquée. RÉSULTATS: Après ajustement pour l’âge, le sexe, le tabagisme, les comportements de santé et le statut socio-économique, le fait de vivre dans un endroit classé dans le 3e ou 4e quartile de CR était associé avec un IMC plus élevé (beta pour Q4 = 2.1 kg/m2, IC 95%: 1.02-3.20; beta pour Q3 = 1.5 kg/m2, IC 95%: 0.55-2.47) et un taux plus élevé de risque cardiovasculaires Risque Relatif [RR pour Q4 = 1.82 (IC 95 %: 1.35-2.44); RR pour Q3 = 1.66 (IC 95%: 1.33-2.06)] par rapport au 1er quartile. L'interaction entre le sexe et le CR révèle une différence absolue d’IMC de 1.99 kg/m2 (IC 95%: 0.00-4.01) et un risque supérieur (RR=1.39; IC 95%: 1.06-1.81) chez les femmes par rapport aux hommes. CONCLUSIONS: Le taux de chômage dans le milieux résidentiel est associé à un plus grand risque de maladies cardiovasculaires, mais cette association est plus prononcée chez les femmes.

WiMAX ou l’évolution des réseaux sans-fil ?

L'adoption des technologies de réseaux sans-fil de type WiFi a connu une croissance impressionnante ces dernières années. Cette vague de popularité ne semble pas vouloir s'estomper, il est estimé que 84 millions d’appareils seront vendus en 2007 totalisant des revenus de 3.7 milliards de dollars. Devant cette forte demande, les fabricants d’appareils de télécommunications ont songés à développer des produits encore plus performants. Appuyé par la norme IEEE 802.16, un consortium du nom de WiMAX Forum a regroupé 350 membres dans le but de promouvoir des produits standardisés portant la marque WiMAX. À l'inverse des premières versions du WiFi, le WiMAX sera doté de mécanismes de sécurité beaucoup plus fiables. L'avantage du WiMAX, comme pour plusieurs de ses concurrents, repose sur sa capacité d'opérer sur une large bande de fréquences, réglementées ou non. Sa portée théorique de 50 Km et son débit escompté de 75 Mbit/s a capté l'attention des fournisseurs de services qui cherchent à réduire leurs coûts d'exploitations mais également de divers organismes gouvernementaux qui espèrent améliorer les services de communications dans les communautés des régions éloignées. Grâce à l'appui du ministre des Affaires indiennes et du nord canadien, le territoire du Nunavut a mis sur pied un réseau à large bande qui dessert actuellement l’ensemble de ses 29 communautés sur tout son territoire. La possibilité de couvrir une superficie de plusieurs kilomètres ramène à la surface le concept d’omniprésence ou de « Pervasive computing ». Cette notion représente l’intégration des technologies dans notre entourage afin de rendre nos interactions avec celle-ci plus naturelles. Nos déplacements dans cet environnement pourraient être facilités puisque les ordinateurs seraient en mesure de détecter et réagir à notre présence pour nous offrir des solutions personnalisées. Les déploiements de réseaux de type WiMAX sont déjà en cours dans plusieurs pays, d'après la situation actuelle du marché, il est envisageable de voir une forte adoption de cette forme de diffusion d’informations dans les prochaines années. Le présent document trace un résumé des applications liées au WiMAX et discute de certaines problématiques engendrées par ce type de réseau.

Decimation Filter Design Toolbox for Multi-Standard Wireless Transceivers using MATLAB.

The demand for new telecommunication services requiring higher capacities, data rates and different operating modes have motivated the development of new generation multi-standard wireless transceivers. A multi-standard design often involves extensive system level analysis and architectural partitioning, typically requiring extensive calculations. In this research, a decimation filter design tool for wireless communication standards consisting of GSM, WCDMA, WLANa, WLANb, WLANg and WiMAX is developed in MATLAB® using GUIDE environment for visual analysis. The user can select a required wireless communication standard, and obtain the corresponding multistage decimation filter implementation using this toolbox. The toolbox helps the user or design engineer to perform a quick design and analysis of decimation filter for multiple standards without doing extensive calculation of the underlying methods.

Development and Deployment of Wireless Sensor Network in Paddy Fields of Kuttanad

The evolution of wireless sensor network technology has enabled us to develop advanced systems for real time monitoring. In the present scenario wireless sensor networks are increasingly being used for precision agriculture. The advantages of using wireless sensor networks in agriculture are distributed data collection and monitoring, monitor and control of climate, irrigation and nutrient supply. Hence decreasing the cost of production and increasing the efficiency of production. This paper describes the development and deployment of wireless sensor network for crop monitoring in the paddy fields of Kuttanad, a region of Kerala, the southern state of India.

La ventilazione non-invasiva a pressione positiva nell’insufficienza respiratoria acuta ipercapnica: 10 anni di esperienza clinica di una Unità di Terapia Semi-Intensiva Respiratoria

PremessaSebbene numerosi studi prospettici, controllati e randomizzati abbiano dimostrato il successo della ventilazione non-invasiva a pressione positiva (NIV) in casi selezionati di insufficienza respiratoria acuta ipercapnica (IRA) in setting con intensità di cura differenti, i dati di pratica clinica relativi all’uso della NIV nel “mondo reale” sono limitati. Scopo Riportare i risultati della nostra esperienza clinica sulla NIV nell’IRA applicata nell’Unità di Terapia Semi-Intensiva Respiratoria (UTSIR) allocata all’interno dell’Unità Operativa di Pneumologia di Arezzo negli anni 1996-2006 in termini di: tollerabilità, effetti sui gas ematici, tasso di successo e fattori predittivi del fallimento.MetodiTrecentocinquanta dei 1484 pazienti (23.6%) consecutivamente ammessi per IRA nella nostra Unità Operativa di Pneumologia durante il periodo di studio hanno ricevuto la NIV in aggiunta alla terapia standard, in seguito al raggiungimento di criteri predefiniti impiegati di routine.RisultatiOtto pazienti (2.3%) non hanno tollerato la NIV per discomfort alla maschera, mentre i rimanenti 342 (M: 240, F: 102; età: mediana (interquartili) 74.0 (68.0-79.3) anni; BPCO: 69.3%) sono stati ventilati per >1 ora. I gas ematici sono significativamente migliorati dopo 2 ore di NIV (media (deviazione standard) pH: 7.33 (0.07) versus 7.28 (7.25-7.31), p<0.0001; PaCO2: 71.4 (15.3) mmHg versus 80.8 (16.6) mmHg, p<0.0001; PaO2/FiO2: 205 (61) versus 183 (150-222), p<0.0001). La NIV ha evitato l’intubazione in 285/342 pazienti (83.3%) con una mortalità ospedaliera del 14.0%. Il fallimento della NIV è risultato essere predetto in modo indipendente dall’Apache III (Acute Physiology and Chronic Health Evaluation III) score, dall’indice di massa corporea e dal fallimento tardivo della NIV (> 48 ore di ventilazione) dopo iniziale risposta positiva.ConclusioniSecondo la nostra esperienza clinica di dieci anni realizzata in una UTSIR, la NIV si conferma essere ben tollerata, efficace nel migliorare i gas ematici e utile nell’evitare l’intubazione in molti episodi di IRA non-responsivi alla terapia standard.

The use of wireless data communication and body sensing devices to evaluate occupants' comfort in buildings

Physiological parameters measured by an embedded body sensor system were demonstrated to respond to changes of the air temperature in an office environment. The thermal parameters were monitored with the use of a wireless sensor system that made possible to turn any existing room into a field laboratory. Two human subjects were monitored over daily activities and at various steady-state thermal conditions when the air temperature of the room was altered from 22-23°C to 25-28°C. The subjects indicated their thermal feeling on questionnaires. The measured skin temperature was distributed close to the calculated mean skin temperature corresponding to the given activity level. The variation of Galvanic Skin Response (GSR) reflected the evaporative heat loss through the body surfaces and indicated whether sweating occurred on the subjects. Further investigations are needed to fully evaluate the influence of thermal and other factors on the output given by the investigated body sensor system.

A Packet/Frame sync detector based on statistical mode with application to wireless-USB

Wireless Personal Area Networks (WPANs) are offering high data rates suitable for interconnecting high bandwidth personal consumer devices (Wireless HD streaming, Wireless-USB and Bluetooth EDR). ECMA-368 is the Physical (PHY) and Media Access Control (MAC) backbone of many of these wireless devices. WPAN devices tend to operate in an ad-hoc based network and therefore it is important to successfully latch onto the network and become part of one of the available piconets. This paper presents a new algorithm for detecting the Packet/Fame Sync (PFS) signal in ECMA-368 to identify piconets and aid symbol timing. The algorithm is based on correlating the received PFS symbols with the expected locally stored symbols over the 24 or 12 PFS symbols, but selecting the likely TFC based on the highest statistical mode from the 24 or 12 best correlation results. The results are very favorable showing an improvement margin in the order of 11.5dB in reference sensitivity tests between the required performance using this algorithm and the performance of comparable systems.

Minimum neighbour and extended Kalman filter estimator: a practical distributed channel assignment scheme for dense wireless local area networks

Dense deployments of wireless local area networks (WLANs) are becoming a norm in many cities around the world. However, increased interference and traffic demands can severely limit the aggregate throughput achievable unless an effective channel assignment scheme is used. In this work, a simple and effective distributed channel assignment (DCA) scheme is proposed. It is shown that in order to maximise throughput, each access point (AP) simply chooses the channel with the minimum number of active neighbour nodes (i.e. nodes associated with neighbouring APs that have packets to send). However, application of such a scheme to practice depends critically on its ability to estimate the number of neighbour nodes in each channel, for which no practical estimator has been proposed before. In view of this, an extended Kalman filter (EKF) estimator and an estimate of the number of nodes by AP are proposed. These not only provide fast and accurate estimates but can also exploit channel switching information of neighbouring APs. Extensive packet level simulation results show that the proposed minimum neighbour and EKF estimator (MINEK) scheme is highly scalable and can provide significant throughput improvement over other channel assignment schemes.