Dispersão da Refractariedade Auricular como Substrato Electrofisiológico da Vulnerabilidade Auricular em Doentes com Fibrilhação Auricular Paroxística

Atrial electrical remodeling plays a part in recurrence of atrial fibrillation (AF). It has been related to an increase in heterogeneity of atrial refractoriness that facilitates the occurrence of multiple reentry wavelets and vulnerability to AF. AIM: To examine the relationship between dispersion of atrial refractoriness (Disp_A) and vulnerability to AF induction (A_Vuln) in patients with clinical paroxysmal AF (PAF). METHODS: Thirty-six patients (22 male; age 55+/-13 years) with > or =1 year of history of PAF (no underlying structural heart disease--n=20, systemic hypertension--n=14, mitral valve prolapse--n=1, surgically corrected pulmonary stenosis--n=1), underwent electrophysiological study (EPS) while off medication. The atrial effective refractory period (AERP) was assessed at five different sites--high (HRA) and low (LRA) lateral right atrium, high interatrial septum (IAS), proximal (pCS) and distal (dCS) coronary sinus--during a cycle length of 600 ms. AERP was taken as the longest S1-S2 interval that failed to initiate a propagation response. Disp_A was calculated as the difference between the longest and shortest AERP. A_Vuln was defined as the ability to induce AF with 1-2 extrastimuli or with incremental atrial pacing (600-300 ms) from the HRA or dCS. The EPS included analysis of focal electrical activity based on the presence of supraventricular ectopic beats (spontaneous or with provocative maneuvers). The patients were divided into group A--AF inducible (n=25) and group B--AF not inducible (n=11). Disp_A was analyzed to determine any association with A_Vuln. Disp_A and A_Vuln were also examined in those patients with documented repetitive focal activity. Logistic regression was used to determine any association of the following variables with A_Vuln: age, systemic hypertension, left ventricular hypertrophy, left atrial size, left ventricular function, duration of PAF, documented atrial flutter/tachycardia and Disp_A. RESULTS: There were no significant differences between the groups with regard to clinical characteristics and echocardiographic data. AF was inducible in 71% of the patients and noninducible in 29%. Group A had greater Disp_A compared to group B (105+/-78 ms vs. 49+/-20 ms; p=0.01). Disp_A was >40 ms in 50% of the patients without A_Vuln and in 91% of those with A_Vuln (p=0.05). Focal activity was demonstrated in 14 cases (39%), 57% of them with A_Vuln. Disp_A was 56+/-23 ms in this group and 92+/-78 ms in the others (p=0.07). Using logistic regression, the only predictor of A_Vuln was Disp_A (p=0.05). CONCLUSION: In patients with paroxysmal AF, Disp_A is a major determinant of A_Vuln. Nevertheless, the degree of nonuniformity of AERP appears to be less important as an electrophysiological substrate for AF due to focal activation.

Effect of sialic acid loss on dendritic cell maturation

Sialic acids are key structural determinants and contribute to the functionality of a number of immune cell receptors. Previously, we demonstrated that differentiation of human dendritic cells (DCs) is accompanied by an increased expression of sialylated cell surface structures, putatively through the activity of the ST3Gal.I and ST6Gal.I sialyltransferases. Furthermore, DC endocytosis was reduced upon removal of the cell surface sialic acid residues by neuraminidase. In the present work, we evaluate the contribution of the sialic acid modifications in DC maturation. We demonstrate that neuraminidase-treated human DCs have increased expression of major histocompatibility complex (MHC) and costimulatory molecules, increased gene expression of specific cytokines and induce a higher proliferative response of T lymphocytes. Together, the data suggest that clearance of cell surface sialic acids contributes to the development of a T helper type 1 proinflammatory response. This postulate is supported by mouse models, where elevated MHC class II and increased maturation of specific DC subsets were observed in DCs harvested from ST3Gal.I(-/-) and ST6Gal.I(-/-) mice. Moreover, important qualitative differences, particularly in the extent of reduced endocytosis and in the peripheral distribution of DC subsets, existed between the ST3Gal.I(-/-) and ST6Gal.I(-/-) strains. Together, the data strongly suggest not only a role of cell surface sialic acid modifications in maturation and functionality of DCs, but also that the sialic acid linkages created by different sialyltransferases are functionally distinct. Consequently, with particular relevance to DC-based therapies, cell surface sialylation, mediated by individual sialyltransferases, can influence the immunogenicity of DCs upon antigen loading.

Inducibility of Atrial Fibrillation During Electrophysiologic Evaluation is Associated with Increased Dispersion of Atrial Refractoriness

The impact of atrial dispersion of refractoriness (Disp_A) in the inducibility and maintenance of atrial fibrillation (AF) has not been fully resolved. AIM: To study the Disp_A and the vulnerability (A_Vuln) for the induction of self-limited (<60 s) and sustained episodes of AF. METHODS AND RESULTS: Forty-seven patients with paroxysmal AF (PAF): 29 patients without structural heart disease and 18 with hypertensive heart disease. Atrial effective refractory period (ERP) was assessed at five sites--right atrial appendage and low lateral right atrium, high interatrial septum, proximal and distal coronary sinus. We compared three groups: group A - AF not inducible (n=13); group B - AF inducible, self-limited (n=18); group C - AF inducible, sustained (n=16). Age, lone AF, hypertension, left atrial and left ventricular (LV) dimensions, LV systolic function, duration of AF history, atrial flutter/tachycardia, previous antiarrhythmics, and Disp_A were analysed with logistic regression to determine association with A_Vuln for AF inducibility. The ERP at different sites showed no differences among the groups. Group A had a lower Disp_A compared to group B (47+/-20 ms vs 82+/-65 ms; p=0.002), and when compared to group C (47+/-20 ms vs 80+/-55 ms; p=0.008). There was no significant difference in Disp_A between groups B and C. By means of multivariate regression analysis, the only predictor of A_Vuln was Disp_A (p=0.04). Conclusion: In patients with PAF, increased Disp_A represents an electrophysiological marker of A_Vuln. Inducibility of both self-limited and sustained episodes of AF is associated with similar values of Disp_A. These findings suggest that the maintenance of AF is influenced by additional factors.

The effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive

One parameter that influences the adhesively bonded joints performance is the adhesive layer thickness. Hence, its effect has to be investigated experimentally and should be taken into consideration in the design of adhesive joints. Most of the results from literature are for typical structural epoxy adhesives which are generally formulated to perform in thin sections. However, polyurethane adhesives are designed to perform in thicker sections and might have a different behavior as a function of adhesive thickness. In this study, the effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive was investigated. The mode I fracture toughness of the adhesive was measured using double-cantilever beam (DCB) tests with various thicknesses of the adhesive layer ranging from 0.2 to 2 mm. In addition, single lap joints (SLJs) were fabricated and tested to assess the influence of adhesive thickness on the lap-shear strength of the adhesive. An increasing fracture toughness with increasing adhesive thickness was found. The lap-shear strength decreases as the adhesive layer gets thicker, but in contrast to joints with brittle adhesives the decrease trend was less pronounced.

Structural adhesives modified with thermally expandable particles

In this study, the behaviour of two structural adhesives modified with thermally expandable particles (TEPs) was investigated as a preliminary study for further investigations on the potential of TEPs in adhesive joints. Tensile bulk tests were performed to get the tensile properties of the adhesives and TEPs-modified adhesives. In order to determine the expansion temperature of the particles while encapsulated in these particular adhesive systems, the variation of the volume of adhesive samples modified with different TEPs concentration as a function of temperature was measured. Further, the possibility of any chemical interactions between TEPs and adhesives matrix in the TEPs-modified specimens was verified by a Fourier transform infrared spectroscopy analysis. Finally, the fracture surfaces of the unmodified and TEPs-modified specimens, as well as the dispersion and the morphology of the particles, were examined by a scanning electron microscopy analysis. It was found that the stiffness of the TEPs-modified adhesives is not affected by incorporation of TEPs in the adhesives matrix, while the tensile yield strength decreased by increasing the wt% TEPs content. In applications of such particular materials (TEPs-modified adhesives), the temperature should be controlled to stay between 90°C and 120°C in order to obtain the highest expansion ratio. At a lower temperature, not all the particles will expand, and above, the TEPs will deteriorate and as a result the TEPs-modified adhesives will deteriorate.

Biosynthesis-Assisted Structural Elucidation of the Bartolosides, Chlorinated Aromatic Glycolipids from Cyanobacteria

The isolation of the bartolosides, unprecedented cyanobacterial glycolipids featuring aliphatic chains with chlorine substituents and C-glycosyl moieties, is reported. Their chlorinated dialkylresorcinol (DAR) core presented a major structural-elucidation challenge. To overcome this, we discovered the bartoloside (brt) biosynthetic gene cluster and linked it to the natural products through in vitro characterization of the DAR-forming ketosynthase and aromatase. Bioinformatic analysis also revealed a novel potential halogenase. Knowledge of the bartoloside biosynthesis constrained the DAR core structure by defining key pathway intermediates, ultimately allowing us to determine the full structures of the bartolosides. This work illustrates the power of genomics to enable the use of biosynthetic information for structure elucidation.

Structural change: a brief review

This is a short summary of some aspects of structural change models, and is not intended to be comprehensive survey or review. Many important works have been left out. Also, the presentation was not intended to be rigorous nor general. It’s main purpose is only to focus on some recent developments in this area and motivate the reader to learn more.

Differences in exoenzyme production and adherence ability of Candida spp. isolates from catheter, blood and oral cavity

Phospholipase and proteinase production and the ability of adhesion to buccal epithelial cells (BEC) of 112 Candida isolates originated from oral cavity of HIV infected patients and from blood and catheter of intensive care unit patients were investigated. The proteinase production was detected by inoculation into bovine serum albumin (BSA) agar and the phospholipase activity was performed using egg yolk emulsion. A yeast suspension of each test strain was incubated with buccal epithelial cells and the number of adherence yeast to epithelial cells was counted. A percentage of 88.1% and 55.9% of Candida albicans and 69.8% and 37.7% of non-albicans Candida isolates produced proteinase and phospholipase, respectively. Non-albicans Candida isolated from catheter were more proteolytic than C. albicans isolates. Blood isolates were more proteolytic than catheter and oral cavity isolates while oral cavity isolates produced more phospholipase than those from blood and catheter. C. albicans isolates from oral cavity and from catheter were more adherent to BEC than non-albicans Candida isolates, but the adhesion was not different among the three sources analyzed. The results indicated differences in the production of phospholipase and proteinase and in the ability of adhesion to BEC among Candida spp. isolates from different sources. This study suggests that the pathogenicity of Candida can be correlated with the infected site.

Temporal differences in blood meal detection from the midguts of Triatoma infestans

We used genus/species specific PCRs to determine the temporal persistence of host DNA in Triatoma infestans experimentally fed on blood from six common vertebrate species: humans, domestic dogs, guinea pigs, chickens, mice, and pigs. Twenty third or fourth instar nymphs per animal group were allowed to feed to engorgement, followed by fasting-maintenance in the insectary. At 7, 14, 21, or 28 days post-feeding, the midgut contents from five triatomines per group were tested with the respective PCR assay. DNA from all vertebrate species was detected in at least four of five study nymphs at seven and 14 days post-feeding. DNA of humans, domestic dogs, guinea pigs, pigs, and chickens were more successfully detected (80-100%) through day 21, and less successfully (20-100%) at day 28. Findings demonstrate that species-specific PCRs can consistently identify feeding sources of T. infestans within two weeks, a biologically relevant time interval.

In situ measured cross section geometry of old timber structures and its influence on structural safety

Old timber structures may show significant variation in the cross section geometry along the same element, as a result of both construction methods and deterioration. As consequence, the definition of the geometric parameters in situ may be both time consuming and costly. This work presents the results of inspections carried out in different timber structures. Based on the obtained results, different simplified geometric models are proposed in order to efficiently model the geometry variations found. Probabilistic modelling techniques are also used to define safety parameters of existing timber structures, when subjected to dead and live loads, namely self-weight and wind actions. The parameters of the models have been defined as probabilistic variables, and safety of a selected case study was assessed using the Monte Carlo simulation technique. Assuming a target reliability index, a model was defined for both the residual cross section and the time dependent deterioration evolution. As a consequence, it was possible to compute probabilities of failure and reliability indices, as well as, time evolution deterioration curves for this structure. The results obtained provide a proposal for definition of the cross section geometric parameters of existing timber structures with different levels of decay, using a simplified probabilistic geometry model and considering a remaining capacity factor for the decayed areas. This model can be used for assessing the safety of the structure at present and for predicting future performance.

Active bionanoconjugates of laccase and gold nanoparticles: kinetic and structural studies

Thesis for the master degree in Structural and Functional Biochemistry

Using gold nanoparticles in protein crystallography: studies in crystal growth and derivatization

Dissertation for the Master Degree in Structural and Functional Biochemistry

Gender Differences in Spatial Cognition: Wayfinding Performance and Sketch Mapping Activity of German Speakers

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies

Análise comparativa das ações do tráfego rodoviário definidas em diversos regulamentos internacionais de pontes

O presente trabalho pretende avaliar as diferenças de efeitos que os modelos de sobrecarga rodoviária de dez regulamentos (RSA, EC1-2, NBR, AASHTO, SATCC, CSA, IRC:6, SNiP, Manual de Hong Kong, NCP) provocam em pontes rodoviárias de pequeno a médio vão. Numa primeira parte são cobertas questões relacionadas com os efeitos dinâmicos em pontes referenciando-se diversos estudos. Em seguida são apresentados os principais fatores que influenciam os efeitos das sobrecargas rodoviárias. Os modelos de sobrecarga rodoviária, definidos nos diversos regulamentos, são descritos pormenorizadamente com o objetivo de clarificar e facilitar a sua aplicação. No que se refere à componente numérica do trabalho, a quantificação dos efeitos que cada modelo origina foi realizada através da modelação em elementos finitos de tabuleiros de comprimento variável entre 10 e 40 metros. Longitudinalmente analisaram-se os valores máximos do momento fletor e do esforço transverso, e numa análise transversal estudaram-se os valores máximos de momentos fletores positivos e negativos originados em cada tabuleiro. No capítulo 7 é realizada uma análise comparativa dos efeitos causados pelos modelos de sobrecarga rodoviária definidos em cada regulamento tomando como referência os valores obtidos pelo RSA.

An NMR structural study of nickel-substituted rubredoxin

J Biol Inorg Chem (2010) 15:409–420 DOI 10.1007/s00775-009-0613-6