A metafrontier production function for estimation of technical efficiencies and technology gaps for firms operating under different technologies

This paper presents a metafrontier production function model for firms in different groups having different technologies. The metafrontier model enables the calculation of comparable technical efficiencies for firms operating under different technologies. The model also enables the technology gaps to be estimated for firms under different technologies relative to the potential technology available to the industry as a whole. The metafrontier model is applied in the analysis of panel data on garment firms in five different regions of Indonesia, assuming that the regional stochastic frontier production function models have technical inefficiency effects with the time-varying structure proposed by Battese and Coelli ( 1992).

The 'parallel bridge' and its relevance to biotechnology new ventures

A firm's competitive strategy and innovation processes are strongly influenced by, and must be responsive to, its competitive environment. This is nowhere more strongly evident than in the high technology industries. In the present work, case studies of biotechnology new ventures are presented. These studies illustrate how an initial market entry strategy of parallel competition (through creative imitation) has enabled several biotechnology start-ups to reduce their mortality risk. We coin the term ''parallel bridge'' to describe this strategy. The parallel bridge provides early cash flows which support research and development and provide time for new ventures to develop core competencies, including a capacity to produce second and third horizon products that will sustain longer term competitiveness.

Visual thalamocortical projections in the flying fox: Parallel pathways to striate and extrastriate areas

We studied thalamic projections to the visual cortex in flying foxes, animals that share neural features believed to resemble those present in the brains of early primates. Neurones labeled by injections of fluorescent tracers in striate and extrastriate cortices were charted relative to the architectural boundaries of thalamic nuclei. Three main findings are reported: First, there are parallel lateral geniculate nucleus (LGN) projections to striate and extrastriate cortices. Second, the pulvinar complex is expansive, and contains multiple subdivisions. Third, across the visual thalamus, the location of cells labeled after visual cortex injections changes systematically, with caudal visual areas receiving their strongest projections from the most lateral thalamic nuclei, and rostral areas receiving strong projections from medial nuclei. We identified three architectural layers in the LGN, and three subdivisions of the pulvinar complex. The outer LGN layer contained the largest cells, and had strong projections to the areas V1, V2 and V3. Neurones in the intermediate LGN layer were intermediate in size, and projected to V1 and, less densely, to V2. The layer nearest to the origin of the optic radiation contained the smallest cells, and projected not only to V1, V2 and V3, but also, weakly, to the occipitotemporal area (OT, which is similar to primate middle temporal area) and the occipitoparietal area (OP, a third tier area located near the dorsal midline). V1, V2 and V3 received strong projections from the lateral and intermediate subdivisions of the pulvinar complex, while OP and OT received their main thalamic input from the intermediate and medial subdivisions of the pulvinar complex. These results suggest parallels with the carnivore visual system, and indicate that the restriction of the projections of the large- and intermediatesized LGN layers to V1, observed in present-day primates, evolved from a more generalized mammalian condition. (C) 2004 IBRO. Published by Elsevier Ltd. All rights reserved.

Capped acyclic permutants of the circular protein kalata B1

The cyclotides are a family of head-to-tail cyclized peptides that display exceptionally high stability and a range of biological activities. Acyclic permutants that contain a break in the circular backbone have been reported to be devoid of the haemolytic activity of the prototypic cyclotide kalata B1, but the potential role of the charges at the introduced termini in this loss of membraneolytic activity has not been fully determined. In this study, acyclic permutants of kalata B1 with capped N- and G termini were synthesized and found to adopt a native fold. These variants were observed to cause no measurable lysis of erythrocytes, strengthening the connection between backbone cyclization and haemolytic activity. (C) 2004 Published by Elsevier B.V. on behalf of the Federation of European Biochemical Societies.

The nomenclature of style: Brutalism, Minimalism, art history and visual style in architecture journals

The naming of styles or movements is a basic mechanism of the architectural journals. The announcement of new tendencies, groups or philosophies, gives a journal its character as ‘news’, and if such terms are taken up in general discourse this demonstrates the prescience of the editor and enhances the repute of the journal. The announcement of phenomenon such as ‘critical regionalism’ or ‘deconstructivism’ referred architectural developments to a context in socio-politics or philosophy, and thus aimed to provide at least an initial resistance to their understanding as the formal styles which they quickly became. A different strategy, or occasion, which this paper will discuss, is where the name of an architectural moment is given in the traditional form of an art historical style. Here the nomenclature of style and a certain attitude to form is introduced as the starting point for a more open ended critical inquiry. Two examples of this strategy will be given. The first is Peter Reyner Banham and the Architecture Review’s promotion of ‘Brutalism’ as an anti-aesthetic which took its conceptual form from early twentieth century art movements, particularly Futurism. The second, identified with Architectural Design in the 1990’s is ‘Minimalism’, a term describing a strand of the visual arts of the 1960’s which can be understood as an attempt to nuance and add seriousness to the present rampant nostalgia for the style of the architecture of the 1960’s.

Post-Fordism, the welfare state and the personal social services: A comparison of Australia and Britain

The Post-Fordist welfare state thesis locates contemporary social welfare change within a wider analysis of the transformation of capitalist accumulation regimes. Whilst this analysis is useful in directing attention to macro socio-economic change, it has for the most part contained three shortcomings. First, the Post-Fordist thesis has overemphasized the role of historical 'breaks' in the development of social welfare as it purportedly passes from Fordism to Post-Fordism. Second, the thesis has assumed a degree of convergence between welfare states as a result of global economic forces. In doing so, it has underemphasized the mediating impact of existing institutional arrangements within nations. Third, the thesis has assumed, rather than demonstrated, the specific changes which are alleged to be taking place in various fields of social welfare. As a consequence, aspects of continuity in social welfare have been neglected. These three lacunae are addressed through a comparative analysis of developments in the personal social services in Australia and Britain. Services to older people are employed as the specific context of comparison in relation to three dimensions of measuring transformation along a Post-Fordist trajectory: a shift from a unitary economy to a mixed economy of service provision; changes in the model of service delivery and consumption; and strengthening the governance function of the central state. This comparative analysis suggests the need for refinement of the Post-Fordist welfare state thesis concerning the restructuring of social welfare and its impact on the personal social services.

Comparing the conditions for small business and entrepreneurship in Sweden and Australia: Lessons for the European Charter for Small Enterprises

A growing body of literature is concerned with explaining cross-national performance of small business and entrepreneurs in advanced economies. This literature has considered a range of policy and institutional variables which create an environment supportive of small firms and entrepreneurial activities including macroeconomic variables such as taxation, labour market regulation, social security and income policy; regulatory factors such as establishment legislation, bankruptcy policy, administrative burdens, compliance costs, deregulation and competition policy; and cultural factors such as social and cultural norms that support entrepreneurship. However, this literature has not always distinguished between the policy environment of small firms operating in different industry sectors. The purpose of this paper is to examine the institutional and policy environment of small firms in knowledge intensive sectors. The characteristics of the business environment of particular relevance to knowledge intensive firms are somewhat different from the conditions for entrepreneurship and small business success more generally. This paper compares the science, technology and industry infrastructure of Australia, Denmark, Sweden with other OECD countries. The purpose of the paper is to identify cross-national differences in the business environment of small knowledge intensive firms. The paper seeks to explore whether particular institutional environments appear to be more supportive of small firms in knowledge intensive sectors.

The Japanisation process in Malaysia

This thesis examines the empirical evidence for the transferability of Japanese soft technology (JST) or Japanese work organisation within two government-initiated, Malaysian-Japanese strategic alliances: PROTON and PERNEC. The government, through its Look East Policy (LEP) began in 1982, taking Japan (and South Korea) as models and partners in Malaysian economic and industrial development process, and expected these alliances to learn the good aspects of Japanese work organisations and management styles in order for them to become independent companies, both technologically and economically. The thesis found that the alliances have been successfully taking and utilising Japanese parts, components, tools, robots and machines; i.e. the 'ready-made hard technology'. [Whereas the important element of soft technology has been ignored]. The soft technology has been slowly and marginally transferred because neither local parties nor their Japanese counterparts within the alliances consider the acquisition or transfer of soft technology to be the main concern or a part of business plan. Although many factors influence management transfer, the thesis has focused on the eagerness and the capability of Malaysian managerial teams to acquire and, to a lesser extent, the readiness of the Japanese to transfer the technology. It was found that there is a lack of demand on technology acquisition by Malaysian managers and lack of responsibility to transfer the technology among Japanese experts. However, the political and social pressures on these alliances, the industrial climate and labour market, leaderships and management system of alliances, and Japanese MNCs regional and global corporate strategies have contributed to the high level of transfer of JST at PROTON compared to PERNEC. The research also found that Malaysian industrial and investment policies have favoured foreign investment but there is a lack of strategies for nurturing indigenous technological development.On the other hand the Japanese MNCs and public agencies have been operating in Malaysia and guided by their regional and global corporate strategies and less concerned with Malaysian technological development. In conclusion, empirically, the JST transfer is minimal. The transfer has been influenced by internal contingency factors of organisation; external industrial, political and cultural environmental factors; and last but not least the Japanese MNCs' global and regional corporate strategies. The transfer of Japanese management in this research is inclined towards core-periphery transfer model, it is also related to organisational and national technological capability.

An interpretive approach to analysing the role and value of information systems in Jordanian financial organisations

Analysing investments in ISs in order to maximise benefits has become a prime concern, especially for private corporations. No formula of equilibrium exists that could link the injected amounts and accrued returns. The relationship is simply not straightforward. This thesis is based upon empirical work which involved sketching organisational ethnographies (four organographies and a sectography) into the role and value of information systems in Jordanian financial organisations. Besides deciphering the map of impacts, it explains the attributions of the variations in the impacts of ISs which were found to be related to the internal organisational processes: culturally and politically specific considerations, economically or technically rooted factors and environmental factors. The research serves as an empirical attempt to test out the applicability of adopting the interpretive paradigm to researching organisations in a developing country. The fieldwork comprised an exploratory stage, a detailed investigation of four case studies and a survey stage encompassing 16 organisations. Primary and secondary data were collected from multiple sources using a range of instruments. The evidence highlights the fact that little long term strategic planning was pursued; the emphasis was more focused on short term planning. There was no noticeable adoption of any strategic fit principle linking IS strategy to the corporate strategy. In addition, the benefits obtained were mostly intangible. Although ISs were central to the work of the organisations surveyed as the core technology, they were considered as tools or work enablers rather than weapons for competitive rivalry. The cultural specificity of IS impacts was evident and the cultural and political considerations were key factors in explaining the attributions of the variations in the impacts of ISs in JFOs. The thesis confirms that measuring the benefits of ISs is the problematic. However, in order to gain more insight, the phenomenon of "the use of ISs" has to be studied within its context.

Empirical analysis of human capital development and economic growth in Europe

Recent discussion of the knowledge-based economy draws increasingly attention to the role that the creation and management of knowledge plays in economic development. Development of human capital, the principal mechanism for knowledge creation and management, becomes a central issue for policy-makers and practitioners at the regional, as well as national, level. Facing competition both within and across nations, regional policy-makers view human capital development as a key to strengthening the positions of their economies in the global market. Against this background, the aim of this study is to go some way towards answering the question of whether, and how, investment in education and vocational training at regional level provides these territorial units with comparative advantages. The study reviews literature in economics and economic geography on economic growth (Chapter 2). In growth model literature, human capital has gained increased recognition as a key production factor along with physical capital and labour. Although leaving technical progress as an exogenous factor, neoclassical Solow-Swan models have improved their estimates through the inclusion of human capital. In contrast, endogenous growth models place investment in research at centre stage in accounting for technical progress. As a result, they often focus upon research workers, who embody high-order human capital, as a key variable in their framework. An issue of discussion is how human capital facilitates economic growth: is it the level of its stock or its accumulation that influences the rate of growth? In addition, these economic models are criticised in economic geography literature for their failure to consider spatial aspects of economic development, and particularly for their lack of attention to tacit knowledge and urban environments that facilitate the exchange of such knowledge. Our empirical analysis of European regions (Chapter 3) shows that investment by individuals in human capital formation has distinct patterns. Those regions with a higher level of investment in tertiary education tend to have a larger concentration of information and communication technology (ICT) sectors (including provision of ICT services and manufacture of ICT devices and equipment) and research functions. Not surprisingly, regions with major metropolitan areas where higher education institutions are located show a high enrolment rate for tertiary education, suggesting a possible link to the demand from high-order corporate functions located there. Furthermore, the rate of human capital development (at the level of vocational type of upper secondary education) appears to have significant association with the level of entrepreneurship in emerging industries such as ICT-related services and ICT manufacturing, whereas such association is not found with traditional manufacturing industries. In general, a high level of investment by individuals in tertiary education is found in those regions that accommodate high-tech industries and high-order corporate functions such as research and development (R&D). These functions are supported through the urban infrastructure and public science base, facilitating exchange of tacit knowledge. They also enjoy a low unemployment rate. However, the existing stock of human and physical capital in those regions with a high level of urban infrastructure does not lead to a high rate of economic growth. Our empirical analysis demonstrates that the rate of economic growth is determined by the accumulation of human and physical capital, not by level of their existing stocks. We found no significant effects of scale that would favour those regions with a larger stock of human capital. The primary policy implication of our study is that, in order to facilitate economic growth, education and training need to supply human capital at a faster pace than simply replenishing it as it disappears from the labour market. Given the significant impact of high-order human capital (such as business R&D staff in our case study) as well as the increasingly fast pace of technological change that makes human capital obsolete, a concerted effort needs to be made to facilitate its continuous development.

Foreign direct investment, technology sourcing and reverse spillovers

Recent theoretical work points to the possibility of foreign direct investment motivated not by 'ownership' advantages which may be exploited by a multinational enterprise but by the desire to access the superior technology of a host nation through direct investment. To be successful, technology sourcing foreign direct investment hinges crucially on the existence of domestic-to-foreign technological externalities within the host country. We test empirically for the existence of such 'reverse spillover' effects for a panel of UK manufacturing industries. The results demonstrate that technology generated by the domestic sector spills over to foreign multinational enterprises, but that this effect is restricted to relatively research and development intensive sectors. There is also evidence that these spillover effects are affected by the spatial concentration of industry, and that learning-by-doing effects are restricted to sectors in which technology sourcing is unlikely to be a motivating influence.

"Action at a distance":accounting inscriptions and the reporting of episodes of clinical care

This paper reports on an aspect of the implementation of a sophisticated system of Casemix Budgeting within a large public hospital in New Zealand. The paper examines the role of accounting inscription in supporting a system of “remote” management control effected through the Finance function at the hospital. The paper provides detailed description and analysis of part of the casemix technology in use at the research site. The implementation of clinical budgeting through the Transition casemix system will be examined by describing an aspect of the casemix system in detail. The design and use of management reporting is described. Reporting to different levels of management and for differing parts of the organisation are discussed with particular emphasis on the adoption of traditional analysis of costs using standard costing and variance analysis techniques.

The relationship between market share and information in a high-tech industry

The role of information in high-technology markets is critical (Dutta, Narasimhan and Rajiv 1999; Farrell and Saloner 1986; Weiss and Heide 1993). In these markets, the volatility and volume of information present managers and researchers with the considerable challenge of monitoring such information and examining how potential customers may respond to it. This article examines the effects of the type and volume of information on the market share of different technological standards in the Local Area Networks (LAN) industry. We identify three different types of information: technological, availability and adoption. Our empirical application suggests that all three types of information have significant effects on the market share of a technological standard, but their direction and magnitude differ. More specifically, technology-related information is negatively related to market share as it demonstrates that the underlying technology is immature and still evolving. Both availability and adoption-related information have a positive effect on market share, but the former is larger than the latter. We conclude that high-tech firms should emphasize the dissemination of information, especially availability-related, as part of their promotional strategy for a new technology. Otherwise, they may risk missing an opportunity to achieve a higher share and establish their market presence.

Biomass fuelled combined heat and power:situation in the UK and the Netherlands

Combined Heat and Power (CHP) is the simultaneous generation of usable heat and power in a single process. Despite its obvious advantages in terms of increased efficiency when compared to a single heat or power generation unit, there are a number of technical and economic reasons that have limited their selection. Biomass resources can be, and actually are used as fuel in CHP installations; however several hurdles have to be sorted beforehand, among the most important is the fact that biomass energy sources are not as energy intense as conventional CHP fuels. The ultimate outcome is a limited number of CHP units making use of biomass as fuel. Even fewer CHP units use bioliquids (e.g.: fast pyrolysis biomass liquids, biodiesel and vegetable oil). The Bioliquid-CHP project is carried out by a consortium of seven European and Russian complementary partners, funded by the EU and by the Federal Agency for Science and Innovation of the Russian Federation. The project aim is to develop microturbine and internal combustion engine adaptations in order to adjust these prime movers to bioliquids for CHP applications. This paper will show a summary of the current biomass CHP installations in the UK and the Netherlands, making reference to number of units, capacity, fuel used, the conversion technology involved and the preferred prime movers. The information will give an insight of the current market, with probable future trends and areas where growth could be expected. A similar paper describing the biomass CHP situation in Italy and Russia will be prepared in the near future.

Efficiency improvements to the Groupe Special Mobile (GSM) digital mobile radio system

Groupe Spécial Mobile (GSM) has been developed as the pan-European second generation of digital mobile systems. GSM operates in the 900 MHz frequency band and employs digital technology instead of the analogue technology of its predecessors. Digital technology enables the GSM system to operate in much smaller zones in comparison with the analogue systems. The GSM system will offer greater roaming facilities to its subscribers, extended throughout the countries that have installed the system. The GSM system could be seen as a further enhancement to European integration. GSM has adopted a contention-based protocol for multipoint-to-point transmission. In particular, the slotted-ALOHA medium access protocol is used to coordinate the transmission of the channel request messages between the scattered mobile stations. Collision still happens when more than one mobile station having the same random reference number attempts to transmit on the same time-slot. In this research, a modified version of this protocol has been developed in order to reduce the number of collisions and hence increase the random access channel throughput compared to the existing protocol. The performance evaluation of the protocol has been carried out using simulation methods. Due to the growing demand for mobile radio telephony as well as for data services, optimal usage of the scarce availability radio spectrum is becoming increasingly important. In this research, a protocol has been developed whereby the number of transmitted information packets over the GSM system is increased without any additional increase of the allocated radio spectrum. Simulation results are presented to show the improvements achieved by the proposed protocol. Cellular mobile radio networks commonly respond to an increase in the service demand by using smaller coverage areas. As a result, the volume of the signalling exchanges increases. In this research, a proposal for interconnecting the various entitles of the mobile radio network over the future broadband networks based on the IEEE 802.6 Metropolitan Area Network (MAN) is outlined. Simulation results are presented to show the benefits achieved by interconnecting these entities over the broadband Networks.