Chapter 6 Economic integration and changes in industrial location in Vietnam

Vietnam has been praised for its achievements in economic growth and success in poverty reduction over the last two decades. The incidence of poverty reportedly fell from 58.1% in 1993 to 19.5% in 2004 (VASS [2006, 13]). The country is also considered to have only a moderate level of aggregate economic inequality by international comparisons. As of the early 2000s, Vietnam’s consumption-based Gini coefficient is found to be comparable to that of other countries with similar levels of per capita GDP. The Gini index did increase between 1993 and 2004, but rather slowly, from 0.34 to 0.37 (VASS [2006, 13]). Yet, as the country moves on with its market oriented reforms, the question of inequality has been highlighted in policy and academic discourses. In particular, it is pointed out that socio-economic inequalities between regions (or provinces) are significant and have been widening behind aggregate figures (NCSSH [2001], Mekong Economics [2005], VASS [2006]). Between 1993 and 2004, while real per capita expenditure increased in all regions, it grew fastest in those regions with the highest per capita expenditures and vice versa, resulting in greater regional disparities (VASS [2006, 37]). A major contributing factor to such regional inequalities is the uneven distribution of industry within the country. According to the Statistical Yearbook of Vietnam, of the country's gross industrial output in 2007, over 50% belongs to the South East region, close to 25% to the Red River Delta, and about 10% to the Mekong River Delta. All remaining regions share some 10% of the country's gross industrial output. At a quick glance, the South East increased its share of the total industrial gross output in the 1990s, while the Red River Delta started to gain ground in more recent years. How can the government deal with regional disparities is a valid question. In order to offer an answer, it is necessary in the first place to grasp the trend of disparities as well as its background. To that end, this paper is a preparatory endeavor. Regional disparities in industrial activities can essentially be seen as a result of the location decisions of enterprises. While the General Statistics Office (GSO) of Vietnam has conducted one enterprise census (followed by annual enterprise surveys) and two stages of establishment censuses since 2000, sectorally and geographically disaggregated data are not readily available. Therefore, for the moment, we will draw on earlier studies of industrial location and the determinants of enterprises’ location decisions in Vietnam. The remainder of this paper is structured as follows. The following two sections deal with the country context. Section 2 will outline some major developments in Vietnam’s international economic relations that may affect sub-national location of industry. According to the theory of spatial economics, economic integration is seen as a major driver of changes in industrial location, both between and within countries (Nishikimi [2008]). Section 3, on the other hand, will consider some possible factors affecting geographic distribution of industry in the domestic sphere. In Section 4, existing literature on industrial and firm location will be examined, and Section 5 will briefly summarize the findings and suggest some areas for future research.

Innovation networks in China, Japan, and Korea : evidence from Japanese patent data

The growing importance of innovation in economic growth has encouraged the development of innovation capabilities in East Asia, within which China, Japan, and Korea are most important in terms of technological capabilities. Using Japanese patent data, we examine how knowledge networks have developed among these countries. We find that Japan's technological specialization saw little change, but those of Korea and China changed rapidly since 1970s. By the year 2009, technology specialization has become similar across three countries in the sense that the common field of prominent technology is "electronic circuits and communication technologies". Patent citations suggest that technology flows were largest in the electronic technology, pointing to the deepening of innovation networks in these countries.

Innovation networks in China, Japan, and Korea : further evidence from U.S. patent data

The growing importance of innovation in economic growth has encouraged the development of innovation capabilities in East Asia, within which China, Japan, and Korea are most important in terms of technological capabilities. Using U.S. patent data, we examine how knowledge networks have developed among these countries. We find that Japan's technological specialization saw gradual changes, but those of Korea and China changed rapidly since 1970s. By the year 2009, technology specialization has become similar across three countries in the sense that the common fields of prominent technology are electronics and semiconductors. Patent citations suggest that technology flows were largest in the electronics technology, pointing to the deepening of innovation networks in these countries. Together with our prior work, the Japanese and U.S. data produce similar conclusions about innovation networks.

Features of IP rights enforcement in Korea and China

This report examines recent updates to the regulation and enforcement of intellectual property (IP) rights in Korea and China, in particular patent rights including invention, utility, and design rights. This paper also discusses some features and issues of the actual IP enforcement situation in those countries in comparison with Japan.

Diseño de instrumentos para configurar una política industrial en España basada en los postulados de la economía evolutiva

La evidencia empírica aplicada a países de cierto tamaño y desarrollo económico, muestra que existe una relación directa y positiva entre la intensidad de la industria manufacturera, medida como porcentaje de su PIB, y ciertas variables económicas como, el crecimiento, el desempleo y la balanza exterior de bienes y servicios. En el caso de esta última, se verifica empíricamente, que los países con una proporción de actividad manufacturera inferior al 20%, tienen una marcada tendencia a presentar déficits crónicos de balanza de bienes y servicios, lo que conduce a persistentes déficits por cuenta corriente, al ser el primer déficit el principal componente del segundo. Esto trae consigo un continuado incremento del endeudamiento externo que no cesa, y que terminará en algún momento por desequilibrar el conjunto de la economía de los países con esos déficits crónicos. Las anteriores conclusiones, abren una vía de orientación de la política económica, que tiene como objetivo la promoción de la industria manufacturera de cada país. Y esto es un hecho ya en 2014. Países relevantes, como Alemania o Francia en la UE, incluso los EEUU y últimamente el Reino Unido, y por supuesto países del área asiática como Japón, Corea del Sur y China, llevan años promoviendo su industria manufacturera. Resulta significativo, que el debate ideológico sobre la bondad de la aplicación política industrial por parte de los gobiernos, frente a las teorías liberales de mantener a los poderes públicos lejos de ese tipo de actividades, haya dado paso a un modelo generalizado de corte más bien horizontal, donde los países casi sin excepciones apoyan el desarrollo de sus empresas con numerosos instrumentos, que van bastante más lejos de los habituales de I+D. Se valora por tanto, la industria manufacturera como algo vital para el equilibrio económico. Incluso la UE, defensora durante décadas de la no intervención de los diferentes Estados miembros en actividades de promoción industrial más allá del apoyo a las actividades de I+D, realiza un giro copernicano, que termina en 2012 proclamando que la industria manufacturera es vital para el equilibrio económico de la UE, que hay que promoverla, e incluso marca un objetivo, precisamente del 20%, como contribución manufacturera a su PIB. Es decir, se da por asumido que los servicios no son un sustituto indefinido de la industria y que por tanto tienen un límite, lo que se contrapone frontalmente contra la anterior creencia de que el aumento de la participación de los servicios en la economía, no solo era bueno, sino un síntoma de desarrollo. Esta premisa ya ha dejado de ser cierta para esos y otros países. En cambio, en España nada de esto sucede en las dos últimas décadas, sino que la industria manufacturera no recibe especial atención de los poderes públicos y se desliza en una pendiente de disminución de su contribución al PIB, que incluso se acelera con la crisis económica que comienza en 2007, hasta alcanzar cifras del orden del 12% del PIB en 2013. La política económica que se aplica es la de la deflación de costes, con los efectos consecuentes sobre los salarios y sobre la capacidad de la economía de generar riqueza. Se apuesta por un modelo de mano de obra barata, que recuerda al de los años 60. Como indicador relevante de esta situación, lo que exporta la industria manufacturera española, no ha ganado en contenido tecnológico en los últimos quince años. Esta situación se ve empeorada por un hecho significativo adicional, y es que casi el 40% de las ventas de la industria manufacturera española provienen de empresas de propiedad extranjera, con lo que eso supone por una parte de dependencia tecnológica del exterior como en el caso del automóvil, y de incertidumbre sobre su futuro, al estar basadas en el mantenimiento en el futuro de una mano de obra barata, que frenará que los españoles que trabajan en esas empresas, progresen económicamente. La propuesta de esta Tesis, es en cambio apostar por un modelo de crecimiento para España que tenga como uno de sus pilares el desarrollo de una industria manufacturera sólida y con cada vez mayor contenido tecnológico. Para ello, se propone un Plan de política industrial, donde se incluye la creación de actores impulsores de este plan, que deben ser del máximo nivel político. Si los diferentes gobiernos no entienden y asumen esta necesidad de apoyo a la industria a largo plazo e independiente de los cambios políticos, no será posible llevar a cabo este Plan. Para su puesta en marcha, se propone la creación o refuerzo de numerosos instrumentos de apoyo a la industria manufacturera de carácter fundamentalmente horizontal que van mucho más allá de los habituales del I+D, y que en varios casos, tienen una clara semejanza con otros existentes ya en otros países desarrollados desde hace años. La promoción de la industria manufacturera necesita nuevos instrumentos, como una financiación a largo plazo para las empresas, una promoción ordenada y eficaz de la actividad internacional de las empresas exportadoras, la mayoría de las cuales exportan productos manufacturados, una educación y formación profesional que esté alineada con estos objetivos, unos instrumentos que apoyen en especial el desarrollo la industria manufacturera, o la participación minoritaria pero significativa, del Estado en empresas españolas pertenecientes a sectores estratégicos entre otros. En resumen, esta Tesis propone una alternativa de política económica radicalmente diferente a la de dejar la industria manufacturera española a su suerte, y basar el futuro económico de España en una mano de obra barata. ABSTRACT The empirical evidence, applied to countries of certain size and economic development, shows that there exists a direct and positive relationship between industrial manufacturing activity, measured as a percentage of GDP, and certain economic variables, such as growth, unemployment and the foreign balance of trade. In the case of the latter, it is verified empirically that the countries with a percentage of manufacturing activity below 20% have a marked tendency for chronic deficits of the balance of trade, leading to persistent deficits in the current account, being that the former deficit is the main component of the latter. This brings about a continued increase in foreign debt that does not cease, and that will end at some point by disrupting the economy of the countries with these chronic deficits. The previous conclusions open the way to a new direction for economic policy, which promotes industrial manufacturing in each country. This is already a fact in 2014. Relevant countries, such as Germany or France in the EU, even the US and ultimately the UK, and of course countries of East Asia such as Japan, South Korea and China, have been promoting their industrial manufacturing for years. It becomes significant that the ideological debate about the goodwill of the application of industrial policy by governments, against liberal theories that maintain public powers far from these kinds of activities, has taken a step towards a horizontal-cut generalized model, where countries, with almost no exception, rely on various instruments to develop their companies that go much further than the usual R&D. Industrial manufacture is therefore valued as vital for economic stability. Even the EU, proponent for decades of non-intervention policy that goes beyond R&D, has gone full circle, ending in 2012 by proclaiming that industrial manufacture is vital for the economic stability of the EU, that it must be promoted. They even mark precisely 20% as an objective for manufacturing as a percentage of GDP. In other words, it is a given that services are not an indefinite substitute for industry, and that therefore it has a limit as such. This rejects the notion that the increase in services at the cost of manufacture is not only healthy, but is also a symptom of development. This premise is no longer true for these and other countries. On the other hand, none of this happens in Spain, where industrial manufacture receives no special attention from the public authorities, and it slides on a downward slope of percentage contribution to GDP, which accelerates the economic crisis that begins in 2007, until manufacture reaches values of around 12% of GDP in 2013. The economic policy applied is that of cost deflation, with consequential effects on wages and the capacity of the economy to generate wealth. A model is proposed for cheaper labor, akin to that of the 1960s. As a relevant indicator of this situation, manufacturing exports from Spain have not grown technologically in the last 15 years. The situation is made worse by another significant fact: almost 40% of sales of the manufacturing industry originate from companies of foreign origin, which supposes on one hand a technological dependence on foreign countries, such as in the case of the automotive industry, and on the other hand uncertainty in its future, being that they are based on maintaining cheap labor in the future, which will slow economic progress of Spaniards working in these companies. The proposition of this Thesis is to bet on a growth model for Spain that has as one of its pillars the development of a solid manufacturing industry, with increasing technological content. For this, an industrial policy plan is proposed, which includes the creation of driving agents for this plan, which must be of maximum political level. If the various governments don’t understand and assume this necessity for support of industry in the long term, independent of political change, this plan will not be accomplished. To start it, the creation or reinforcement of numerous instruments to promote the manufacturing activities are proposed, with a fundamentally horizontal nature that goes far beyond the usual R&D, and that, in several cases, have a clear similarity with others existing in other countries, having been developed for years. The promotion of the manufacturing industry needs new instruments, such as the long-term financing of companies, an orderly and efficient promotion of international activity of exporting companies, the most of which export manufactured goods, education and professional training which is in tune with these objectives, some instruments which support in particular the development of the manufacturing industry, or the minor yet significant participation of the State in Spanish companies belonging to strategic sectors, among others. In summary, this Thesis proposes an different alternative to the economic policy of leaving the manufacturing industry of Spain to its chances, and to base the economic future of Spain on a cheaper labor force.

ANALISANDO A RELAÇÃO DOS VOLUMES DE EXPORTAÇÃO E DE IMPORTAÇÃO, PIB, TAXAS DE CÂMBIO E INFLAÇÃO NO PERÍODO DE 2004 A 2014.

Esta dissertação visa deslumbrar uma análise macroeconômica do Brasil, especialmente no que se refere à relação dos índices mensais dos volumes das exportações e das importações com os volumes mensais do PIB, da Taxa SELIC e as Taxas de Câmbio, conforme dados coletados no período de janeiro de 2004 a dezembro de 2014, através de pesquisa literária referente aos históricos sobre cada conceito envolvido no âmbito da macroeconomia das varáveis estudadas. Foi realizado um estudo de caso embasado em dados de sites governamentais, no período delimitado, empregando-se o método de regressão linear, com base na Teoria da correlação de Pearson, demonstrando os resultados obtidos no período do estudo para as varáveis estudadas. Desta maneira, conseguiu-se estudar e analisar como as variáveis dependentes (resposta): volume das exportações e volume das importações estão relacionadas com as varáveis independentes (explicativas): PIB, Taxa Selic e taxa de Câmbio. Os resultados apurados no presente estudo permitem identificar que existe correlação moderada e negativa, quando analisadas a Taxa Selic e a Taxa de Câmbio com os volumes das exportações e das importações, enquanto o PIB apresenta correlação forte e positiva na análise com os volumes das exportações e das importações

Relationship between taxocenoses of decapod crustaceans and characteristics of coastal detritic bottoms in the east and southeast of the Spanish coast

Se ha estudiado la composición de las poblaciones de crustáceos decápodos en los fondos detríticos circalitorales del Este y Sureste ibérico, con relación a sus diferentes facies, efectuándose diferentes análisis estadísticos sobre la composición y diversidad. La taxocenosis de crustáceos decápodos muestra elevados valores de abundancia, riqueza y diversidad en las localidades identificadas como fondos detríticos costeros de aspecto típico. Por último, algunos grupos de especies podrían ser utilizados para caracterizar las biocenosis típica de fondos detríticos costeros, tales como: Paguristes eremita, Ebalia edwardsi, E. deshayesi, Eurynome aspera, Galathea intermedia, Parthenope massena, y Anapagurus hyndmani; la biocenosis del detrítico costero enfangada: Ebalia tuberosa, Atelecyclus rotundatus, Ethusa mascarone, y Liocarcinus zariquieyi; y la biocenosis de arenas fangosas: Upogebia deltaura, Goneplax rhomboides.

Russia's turn towards Asia: more words than actions. OSW Commentary No. 92, 2012-10-08

The APEC summit in Vladivostok (8–9 September) was expected to confirm Russia’s ambitions to play a more significant role in the Asia-Pacific region (particularly in East Asia) and balance Moscow’s foreign policy by shifting some of its focus from Europe to Asia. The measures taken ahead of the summit included both the implementation of economic projects in Russia’s Far East and greater diplomatic engagement in the region. The summit itself, however, was less effective than expected. Russia failed to define its place in the Asia-Pacific order, and did not propose any new political or economic initiatives that would go beyond the discussions that have already been held within APEC for years, including plans for a free trade area.

The New Silk Road: a versatile instrument in China’s policy. OSW Commentary No. 161, February 10 2015

Introduction. The Chinese leader Xi Jinping presented the concept of the New Silk Road – a collection of land and maritime routes – in autumn 2013. Initially, it envisaged the creation of a network of infrastructural connections, mainly transport corridors, between China and its most important economic partner – Europe. The concept grew in importance throughout 2014 to become the key instrument of China’s foreign policy, especially in the areas of public diplomacy and soft power. Towards the end of 2014, the Chinese government announced it would establish a Silk Road Fund worth US$40 billion. The New Silk Road idea is a flexible formula used by China in its dialogue with many other countries. Its inclusive nature helps contribute to diluting the negative impression caused by China’s rapid economic expansion and assertiveness in foreign policy, especially with regard to its neighbours. The process of implementing the New Silk Road concept will allow China to expand its influence within its neighbourhood: in Central and South-Eastern Asia. The New Silk Road will be an alternative point of reference to the US dominance and Russian integration projects in these regions. The concept will legitimise and facilitate the growth of China’s influence in the transit countries on the route to Western Europe, i.e. in the Middle East (Arab countries, Israel and Turkey, the Horn of Africa and Central Europe (the Balkans and the Visegrad Group countries). This concept is also essential for China’s domestic policy. It has become one of Xi Jinping’s main political projects. It will boost the development of China’s central and western provinces. The fact that the concept is open and not fully defined means that it will be a success regardless of the extent to which it will be implemented in practice. Its flexible nature allows China to continue investments already initiated bilaterally and to present them as components of the New Silk Road concept.

Foreign affairs research papers available.

American statistics index

Agriculture in Point 4 countries.

Pt. 1, Middle America.--Pt. 2, South America.--Pt. 3, South & Southeast Asia.--Pt. 4, Near East & independent Africa.

Imperfect Creatures : Vermin, Literature, and the Sciences of Life, 1550-1750 /

Plagues of pests have always been a part of recorded history, but they hold special significance in the early modern period. 'Imperfect Creatures' is the first full-length study to investigate the shifting, unstable, but foundational status of “vermin” as creatures and category in the early modern literary and scientific imagination.

Estimating the abundance of eastern grey kangaroos (Macropus giganteus) in south-eastern New South Wales, Australia

To provide an estimate of kangaroo numbers for harvest management, a survey was designed for an area of 29500 km(2) encompassing the agricultural and grazing lands of the Braidwood, Cooma, Goulburn, Gundagai and Yass Rural Lands Protection Board (RLPB) districts in south-east New South Wales. An aerial survey using a helicopter was considered more efficient than ground survey because of the size of the area, relatively high relief and dense tree cover, and the need for regular monitoring. Tree cover and landscape relief was used to stratify the five RLPB districts into areas of probable high, medium and low kangaroo density. Kangaroo density estimated from helicopter surveys conducted in the Northern Tablelands of New South Wales was used to suggest densities and thereby allocate survey effort in each stratum. A survey comprising 735 km of transect line was conducted in winter 2003 with a target precision of 20%. The survey returned an estimate of 286600 32300 eastern grey kangaroos for the whole of the proposed south-east New South Wales kangaroo-management zone. In 2004, a trial harvest of slightly less than 15% of this estimate was taken. Success of the trial will be determined by the impact of harvesting on the population's dynamics, by landholder and industry participation, and by the capacity to monitor population size, harvest offtake and compliance with regulations.

Stock structure of Spanish mackerel Scomberomorus commerson along the Australian east coast deduced from parasite data

The parasite fauna of Spanish mackerel Scomberomorus commerson from three regions off eastern Australia was examined for evidence of separate stocks. The abundance of five metacestodes was very similar in all areas suggesting that extensive mixing of the fish occurs along the coast, unlike the Situation across northern Australia where large differences have been found between regions. The similarity in abundances of two metacestodes from Townsville fish and south-east Queensland fish Suggests that these two regions have fish with very similar histories. The data lead to the conclusion that the seasonal fishery for Spanish mackerel off south-east Queensland is based on a random group of fish from the same origin as fish sampled off Townsville and is not a subpopulation that moves south each year. (c) 2006 The Fisheries Society of the British Isles.

Using a clinical pathway and education to reduce inappropriate prescribing of enoxaparin in patients with acute coronary syndromes: a controlled study

Aims: To evaluate efficacy of a pathway-based quality improvement intervention on appropriate prescribing of the low molecular weight heparin, enoxaparin, in patients with varying risk categories of acute coronary syndrome (ACS). Methods: Rates of enoxaparin use retrospectively evaluated before and after pathway implementation at an intervention hospital were compared to concurrent control patients at a control hospital; both were community hospitals in south-east Queensland. The study population was a group of randomly selected patients (n = 439) admitted to study hospitals with a discharge diagnosis of chest pain, angina, or myocardial infarction, and stratified into high, intermediate, low-risk ACS or non-cardiac chest pain: 146 intervention patients (September-November 2003), 147 historical controls (August-December 2001) at the intervention hospital; 146 concurrent controls (September-November 2003) at the control hospital. Interventions were active implementation of a user-modified clinical pathway coupled with an iterative education programme to medical staff versus passive distribution of a similar pathway without user modification or targeted education. Outcome measures were rates of appropriate enoxaparin use in high-risk ACS patients and rates of inappropriate use in intermediate and low-risk patients. Results: Appropriate use of enoxaparin in high-risk ACS patients was above 90% in all patient groups. Inappropriate use of enoxaparin was significantly reduced as a result of pathway use in intermediate risk (9% intervention patients vs 75% historical controls vs 45% concurrent controls) and low-risk patients (9% vs 62% vs 41%; P < 0.001 for all comparisons). Pathway use was associated with a 3.5-fold (95% CI: 1.3-9.1; P = 0.012) increase in appropriate use of enoxaparin across all patient groups. Conclusion: Active implementation of an acute chest pain pathway combined with continuous education reduced inappropriate use of enoxaparin in patients presenting with intermediate or low-risk ACS.