Addendum I: Paleoclimate and the Solar-Insolation/Tidal-Resonance Climate Model

Recent papers provide detailed analyses of more than 40 high-resolution time series culled from the extensive paleoclimate literature that appear to define cyclical elements of the Solar-Insolation/Tidal-Resonance Climate Model. This model was earlier referred to as the Milankovitch/Pettersson Climatic Theory. This paper provides comparable analyses of an additional 20 or so, evidently supportive, climate and volcanic time series. The tree-ring, historical, pollen, cultural, time-frequency, and hydrologic records range in length from 400 to 90,000 years and spatially from Alaska to Tierra del Fuego.

Storage characteristics of solar-dried Indian mackerel

Fresh Rastrelliger kanagurta (Indian mackerel) was thoroughly washed, eviscerated, cleaned and salted overnight with dry salt (fish : salt :: 5:1). Salted mackerel was dried in solar drier and on cement floor under direct sun for three days. The temperature inside the drier was 948°C higher than the ambient temperature. The rate of drying was higher in solar drier than on cement floor. The dried fish packed in 300-gauge polythene bags was subjected to biochemical, microbiological and organoleptic evaluation at regular intervals to assess the storage life. The overall quality of fish dried in solar drier was better than that of the fish dried on cement floor under direct sun.

An experimental and computational study of the formation of a streamwise shed vortex in a turbine stage

Shear layers shed by aircraft wings roll up into vortices. A similar, though far less common, phenomenon can occur in the wake of a turbomachine blade. This paper presents experimental data from a new single stage turbine that has been commissioned at the Whittle Laboratory. Two low aspect ratio stators have been tested with the same rotor row. Surface flow visualisation illustrates the extremely strong secondary flows present in both NGV designs. These secondary flows lead to conventional passage vortices but also to an intense vortex sheet which is shed from the trailing edge of the blades. Pneumatic probe traverse show how this sheet rolls up into a concentrated vortex in the second stator design, but not in the first. A simple numerical experiment is used to model the shear layer instability and the effects of trailing edge shape and exit yaw angle distribution are investigated. It is found that the latter has a strong influence on shear layer rollup: inhibiting the formation of a vortex downstream of NGV 1 but encouraging it behind NGV 2.

The effect of an upstream turbine on a low-aspect ratio vane

The interaction between a high-pressure rotor and a downstream vane is dominated by vortex-blade interaction. Each rotor blade passing period two co-rotating vortex pairs, the tip-leakage and upper passage vortex and the lower passage and trailing shed vortex, impinge on, and are cut by, the vane leading edge. In addition to the streamwise vortex the tip-leakage flow also contains a large velocity deficit. This causes the interaction of the tip-leakage flow with a downstream vane to differ from typical vortex blade interaction. This paper investigates the effect these interaction mechanisms have on a downstream vane. The test geometry considered was a low aspect ratio second stage vane located within a S-shaped diffuser with large radius change mounted downstream of a shroudless high-pressure turbine stage. Experimental measurements were conducted at engine-representative Mach and Reynolds numbers, and data was acquired using a fast-response aerodynamic probe upstream and downstream of the vane. Time-resolved numerical simulations were undertaken with and without a rotor tip gap in order to investigate the relative magnitude of the interaction mechanisms. The presence of the upstream stage is shown to significantly change the structure of the secondary flow in the vane and to cause a small drop in its performance.

The influence of peel angle on the mechanics of peeling flexible adherends with arbitrary load-extension characteristics

The peel test is commonly used to determine the strength of adhesive joints. In its simplest form, a thin flexible strip which has been bonded to a rigid surface is peeled from the substrate at a constant rate and the peeling force which is applied to the debonding surfaces by the tension in the tape is measured. Peeling can be carried out with the peel angle, i.e. the angle made by the peel force with the substrate surface, from any value above about 10° although peeling tests at 90 and 180° are most common. If the tape is sufficiently thin for its bending resistance to be negligibly small then as well as the debonding or decohesion energy associated with the adhesive in and around the point of separation, the relation between the peeling force and the peeling angle is influenced both by the mechanical properties of the tape and any pre-strain locked into the tape during its application to the substrate. The analytic solution for a tape material which can be idealised as elastic perfectly-plastic is well established. Here, we present a more general form of analysis, applicable in principle to any constitutive relation between tape load and tape extension. Non-linearity between load and extension is of increasing significance as the peel angle is decreased: the model presented is consistent with existing equations describing the failure of a lap joint between non-linear materials. The analysis also allows for energy losses within the adhesive layer which themselves may be influenced by both peel rate and peel angle. We have experimentally examined the application of this new analysis to several specific peeling cases including tapes of cellophane, poly-vinyl chloride and PTFE. © 2005 Elsevier Ltd. All rights reserved.

High tilt angle FLC SLM for optical interconnects

The use of high tilt angle FLC SLM for optical interconnects was discussed. The transmissive SLM was designed as a 320×1 pixels glass SLM with 20 μm pitch pixels and 2 μm pixel deadspace. The SLM was fabricated using standard class 100 cleanroom facilities to make a glass on glass 1D SLM. The results show that a N×N optical switch can be built using the two-hologram architecture.

Quantitative and qualitative assessment of plankton: some ecological aspect and water quality parameters of the river Meghna, Bangladesh

Investigation on the seasonal distribution and abundance of various major taxa of phyto and zooplankton and the corresponding physico-chemical characteristics were carried out in four selected stations between the latitude 22°35.494N N-23°23.987 N and longitude 90°35.793 E- 90°49.061 E of the Meghna river system, Bangladesh. Drop count method was followed for the qualitative and quantitative analysis of both phyto- and zooplankton. A total of 41 phytoplankton genera belonging to 17 families and 13 zooplankton genera belonging to 11 families were recorded. Zooplankton growth cycle was noticeably less (3.0%) than the phytoplankton abundance almost throughout the study period. Quantity of plankton registered to increase chronologically from the upper to lower stretches of the river. During summer investigation the load of phytoplankton was recorded maximum (11,300-51,850 No/1). Ratio-wise quantitative difference between zoo- and phytoplankton in composition of the total standing crop fluctuated between 1.0:5.5 and 1:1037. Among the phytoplanktonic groups, Chlorophyceae was found to be dominating (95.0%) in all sampling stations. Protococcus, a single genus of Chlorophyceae played a unique role during summer, contributing the highest density of about 74.0%. The pattern of qualitative and quantitative difference of plankton standing crop in different sampling sites can be attributed to the existing physico-chemical characteristics, mainly water temperature, pH and hardness.

Quality assessment of rotating and solar tunnel dried marine fish product

Studies were conducted to evaluate the quality aspects of marine dried fish i.e. silver jew fish (Johnius argentatus), Bombay duck (Harpodon nehereus) and ribbon fish (Trichiums haumela) products produced in rotating and solar tunnel dryers. On the basis of organoleptic characteristics such as colour, odour, texture, broken pieces, insect infestation and overall quality, four member panels of experts evaluated the quality of the dried products obtained from both rotating and solar tunnel dryers and all the products were found in acceptable quality. Reconstitutions properties of samples were in the range of 51.05 to 98.75% for the dried fish produced in rotating dryer, while 24.64 to 76.76% for dried fish produced in solar tunnel dryer. The highest reconstitution rate was found in dried silver jew fish and lowest in ribbon fish produced in rotating dryer. On the other hand, the highest reconstitution was observed in dried silver jew fish and lowest in dried Bombay duck produced in solar tunnel dryer. Proximate composition such as moisture, crude protein, lipid and ash content of the dried fish muscles produced in rotating dryer ranged from 16.36% to 19.1%, 62.35% to 67.37%, 6.37% to 10.75% and 7.00% to 8.05%, respectively and in solar tunnel dried fish products, they were in the range of 14.05% to 19.71%,57.64% to 69. 21%,6.92% to 15.40%and 7.69% to 8.80 %, respectively. The TVBN values of dried fish products obtained from rotating dryer were in the range of 15.02 to 19.05 mg/100g, while in solar tunnel dried fish products, the values were in the range of 15.46 to 19.21 mg/100g. The results of the studies indicated that dried fish produced from both rotating and solar tunnel drier were acceptable quality in terms of organoleptic and food quality aspects.

Critical angle laser refractometer

A simple laser refractometer based on the detection of the critical angle for liquids is presented. The calibrated refractometer presents up to 0.000 11 of uncertainty when the refractive index is in the range between 1.300 00 and 1.340 00. The experimental setup is easy to construct and the material needed is available at most optics laboratories. The calibration method is simple and can be used in other devices. The refractive index measurements in aqueous solutions of sodium chloride were carried out to test the device and a linear dependence between the refractive index and the salt concentration was found. © 2006 American Institute of Physics.

On the occurrence of mature penaeid prawn Penaeus merguensis in a shallow solar salt works reservoir along the Okhamandal Coast of Gulf of Kutch and its spawning in laboratory

Penaeus merguensis is so far reported to attain complete maturity and spawn in the sea or deep culture ponds only. Mature specimens of stage III to V collected from a shallow reservoir of solar saltworks were studied and spawned in laboratory. A comparison of spawning of spawner from sea and reservoir is also reported.

Prevention of infestation by Dermestes maculatus Degeer in east African dried fish by solar treatment

East African sun-dried fish infested by Dermestes maculatus were exposed to tropical sunlight at ambient temperature and analysed for insect mortality and weight losses. Solar treatment for 6 to 8 lo was highly effective for one layer of split sun-dried fish and 100% insect mortality was toted, while pest species were still present in the four layer batch. Weight losses between 1.2% and 10.2% were recorded, the top layer suffering the highest loss. The high surface temperature of 60°C caused fish to become brittle and quality losses occurred. A reduction in length of exposure/temperature is probably a presupposition for application of the method to local conditions.

Comparative feature on design, construction and installation of three different model of low cost solar tunnel dryers

The study was conducted in collaboration with the ECFC project of the FAO (BGD/97/017) in Cox's Bazar to develop a low cost solar tunnel dryer for the production of high quality marine dried fish. The study areas were Kutubdiapara, Maheshkhali and Shahparirdip under Cox's Bazar district. Three different models of low cost solar dryer were constructed with locally available materials such as bamboo, wood, bamboo mat, hemp, canvas, wire, nails, rope, tin, polythene and net. Size of the dryers were: 20x4x3 ft ; 30x3x3 ft and 65x3x3 ft with the costs of Tk. 3060, 3530, 9600 for dryer 1, 2 and 3, respectively having different models. The drying capacities were 50, 150, 500 kg for dryer 1, 2 and 3 respectively. The average temperature range inside the dryers were 29-43°C, 34-51°C and 37-57°C for dryer 1, 2 and 3 respectively as recorded at 8:30h to 16:30h. The relative humidity were in the ranges of 22-42%, 27-39% and 24-41 % in dryer 1, 2 and 3 respectively. The fish samples used were Bombay duck, Silver Jew fish and Ribbon fish. The total drying time was in the range of 30-42, 28-38 and 24-34 hours to reach the moisture content of 12.3-14.5, 11.8-14.3, and 11.6-14.1% in dryer 1, 2 and 3 respectively. Among these three fish samples the drying was faster in Silver Jew fish followed by Bombay duck and Ribbon fish in all the three dryer.

Quality assessment of traditional and solar tunnel dried SIS (Small Indigenous Fish Species) products

Studies were conducted to assessment the quality of traditional and solar tunnel dried SIS products. The moisture content of the solar products ranged from 14.38 to 18.48% with the lowest in batashi and the highest value in tengra. The moisture content of the traditional products was in the range of 23.26 to 26.42%. The range of protein contents on moisture free basis was from 67.57 to 71.90% in solar dried fishes with highest value obtained in dhela and lowest value in batashi. These values were more or less similar to those of traditional dried SIS products which were in the range of 68.02 to 73.54% on dry weight basis. Lipid contents of solar dried SIS varied from 14.10 to 16.26% and on moisture free basis the in the range of 11.73 to 21.98 with highest value found in tengra and lowest in puti. These values were more or less similar to those found for traditional dried products on dry weight basis and ranged from were 12.37 to 22.43%. Maximum reconstitution of solar dried products was obtained at 80°C in all samples and was in the range of 65.26 to 70.51% where the percentage of reconstitution increases with the increase of socking time and reach maximum at the end of up to 60 min. The TVB-N content of solar dried fish is low compared with traditional one ranging from 20.30 to 28.40mg/100g and peroxide value in the range of 12. 54 to 19.20meq./kg oil. The TVB-N of traditionally dried products were in the range of 32.50 to 45.45mg/100g and PO values of the traditionally dried products were in the range of 30.00 to 36.00meq./kg oil. The bacterial load of the solar dried products was in the range of 4.0x10 super(3)/g to 3.6x10 super(5)CFU/g and of the traditionally dried products ranged from 1.45x10 super(5) to 2.52x10 super(6) CFU/g.