It runs in the family : the Bradfords, print, and liberty (1680-1810)

En se basant sur l’histoire des Bradfords, l’une des plus grandes familles d’imprimeurs de l’histoire américaine, ce mémoire étudie la relation entre l’imprimé, les imprimeurs, et divers discours sur la liberté au cours du « long » 18e siècle. Il retrace la transition entre une ère de la « liberté de parole, » née des débats sur la liberté de presse et d’expression de la période coloniale, et une ère de la « parole de la liberté, » née au cours de la Révolution et entretenue sous la jeune république. Cette transition fut le produit de la transformation du discours des contemporains sur la liberté, mais s’effectua également en lien avec la transformation du milieu de l’imprimerie et de la culture de l’imprimé. Selon les circonstances politiques, sociales, économiques et culturelles particulières des périodes coloniale, révolutionnaire, et républicaine, l’imprimé et les imprimeurs américains furent appelés à disséminer et à contribuer au discours sur la liberté. Ils établirent ainsi une forte association entre l’imprimé et la liberté dans la culture de l’imprimé du 18e siècle, qui était destinée à être transmise aux siècles suivants. Mots-

Les relations franco-japonaises de 1859 à 1895.

L’histoire des relations franco-japonaises est source de bien des surprises pour les historiens, ces deux pays n’ayant, à première vue, que peu de raisons de se rapprocher. La France du Second Empire est l’une des premières puissances à se rendre au Japon et elle démontre rapidement un vif intérêt pour le développement du Japon. Dès la signature des premiers traités en 1859, la présence française se développe pour atteindre son sommet quelques années plus tard. Malgré les changements de régime au Japon et en France, cette présence restera forte jusqu’au début des années 1880, avant de décliner. Qu’est-ce qui explique cet intérêt? Et, surtout, qu’est-ce qui explique le désintérêt de la France après les années 1880? Il n’y a que quelques auteurs qui ont tenté d’y trouver des réponses, et celles-ci sont, à notre point de vue, peu concluantes: soit la France agit pour faire grandir son prestige, soit elle agit en fonction de ses représentants. Nous tenterons dans le présent travail de cerner et, si possible, de trouver en utilisant une variété de sources françaises une autre cause plus convaincante comme explication de la position française au Japon. Serait-ce le commerce qui a motivé la France au Japon, notamment à cause de la crise du ver à soie? Serait-ce la religion, avec toute la question des persécutions des chrétiens? Ou encore, est-ce une raison plus globale liée à la colonisation de l’Indochine? Afin d’y répondre, nous avons étudié avec minutie les archives du gouvernement français ainsi que les données économiques de l’époque, afin de cerner l’importance qu’ont eue certaines raisons, telles la crise de la soie, les persécutions religieuses et la présence française en Indochine, dans les décisions du gouvernement français.

Caractérisation et évaluation de textiles antifongiques

Hypothèse: L’impression sur textile d’une formulation de microparticules lipidiques avec un principe actif (éconazole nitrate) permet de conserver ou d’améliorer son activité pharmaceutique ex vivo et in vitro. Méthode: Une formulation de microparticules d’éconazole nitrate (ECN) a été formulée par homogénéisation à haut cisaillement, puis imprimée sur un textile LayaTM par une méthode de sérigraphie. La taille des microparticules, la température de fusion des microparticules sur textile et la teneur en éconazole du tissu ont été déterminées. La stabilité de la formulation a été suivie pendant 4 mois à 25°C avec 65% humidité résiduelle (RH). L’activité in vitro des textiles pharmaceutiques a été mesurée et comparée à la formulation commerciale 1% éconazole nitrate (w/w) sur plusieurs espèces de champignons dont le C. albicans, C. glabrata, C. kefyr, C. luminisitae, T. mentagrophytes et T. rubrum. La thermosensibilité des formulations a été étudiée par des tests de diffusion in vitro en cellules de Franz. L’absorption cutanée de l’éconazole a été évaluée ex vivo sur la peau de cochon. Résultats: Les microparticules d’éconazole avaient des tailles de 3.5±0.1 μm. La température de fusion était de 34.8°C. La thermosensibilité a été déterminée par un relargage deux fois supérieur à 32°C comparés à 22°C sur 6 heures. Les textiles ont présenté une teneur stable pendant 4 mois. Les textiles d’ECN in vitro ont démontré une activité similaire à la formulation commerciale sur toutes ii espèces de Candida testées, ainsi qu’une bonne activité contre les dermatophytes. La diffusion sur peau de cochon a démontré une accumulation supérieure dans le stratum corneum de la formulation textile par rapport à la formulation Pevaryl® à 1% ECN. La thermo-sensibilité de la formulation a permis un relargage sélectif au contact de la peau, tout en assurant une bonne conservation à température ambiante.

Vacuum-ultraviolet photochemically initiated modification of polystyrene surfaces: morphological changes and mechanistic investigations

Vacuum-ultraviolet (VUV) irradiation (kexc: 172 ± 12 nm) of polystyrene films in the presence of oxygen produced not only oxidatively functionalized surfaces, but generated also morphological changes. Whereas OH- and C=O-functionalized surfaces might be used for e.g. secondary functionalization, enhanced aggregation or printing, processes leading to morphological changes open new possibilities of microstructurization. Series of experiments made under different experimental conditions brought evidence of two different reaction pathways: introduction of OH- and C=O-groups at the polystyrene pathways is mainly due to the reaction of reactive oxygen species (hydroxyl radicals, atomic oxygen, ozone) produced in the gas phase between the VUV-radiation source and the substrate. However, oxidative fragmentation leading to morphological changes, oxidation products of low molecular weight and eventually to mineralization of the organic substrate is initiated by electronic excitation of the polymer leading to C–C-bond homolysis and to a complex oxidation manifold after trapping of the C-centred radicals by molecular oxygen. The pathways of oxidative functionalization or fragmentation could be differentiated by FTIR-ATR analysis of irradiated polystyrene surfaces before and after washing with acetonitrile and microscopic fluorescence analysis of the surfaces secondarily functionalized with the N,N,N-tridodecyl-triaza-triangulenium (TATA) cation. Ozonization of the polystyrene leads to oxidative functionalization of the polymer surface but cannot initiate the fragmentation of the polymer backbone. Oxidative fragmentation is initiated by electronic excitation of the polymer (contact-mode AFM analysis), and evidence of the generation of intermediate C-centred radicals is given e.g. by experiments in the absence of oxygen leading to cross-linking (solubility effects, optical microscopy, friction-mode AFM) and disproportionation (fluorescence).

Electrochemical studies on Metal phthalocyanines

The primary aim of these investigations was to probe the elecnuchemical and material science aspects of some selected metal phthalocyanines(MPcs).Metal phthalocyanines are characterised by a unique planar molecular structure. As a single class of compounds they have been the subject of ever increasing number of physicochemical and technological investigations. During the last two decades the literature on these compounds was flooded by an outpour of original publications and patents. Almost every branch of materials science has benefited by their application-swface coating, printing, electrophotography, photoelectrochemistry, electronics and medicine to name a few.The present study was confined to the electrical and electrochemical properties of cobalt, nickel, zinc. iron and copper phthalocyanines. The use of soluble Pes as corrosion inhibitor for aluminium was also investigated.In the introductory section of the thesis, the work done so far on MPcs is reviewed. In this review emphasis is given to their general methods of synthesis and the physicochemical properties.In phthalocyanine chemistry one of the formidable tasks is the isolation of singular species. In the second chapter the methods of synthesis and purification are presented with necessary experimental details.The studies on plasma modified films of CoPe, FePc, ZnPc. NiPc and CuPc are also presented.Modification of electron transfer process by such films for reversible redox systems is taken as the criterion to establish enhanced electrocatalytic activity.Metal phthalocyanines are p- type semiconductors and the conductivity is enhanced by doping with iodine. The effect of doping on the activation energy of the conduction process is evaluated by measuring the temperature dependent variation of conductivity. Effect of thennal treatment on iodine doped CoPc is investigated by DSC,magnetic susceptibility, IR, ESR and electronic spectra. The elecnucatalytic activity of such doped materials was probed by cyclic voltammetry.The electron transfer mediation characteristics of MPc films depend on the film thickness. The influence of reducing the effective thickness of the MPc film by dispersing it into a conductive polymeric matrix was investigated. Tetrasulphonated cobalt phthalocyanine (CoTSP) was electrostatically immobilised into polyaniline and poly(o-toluidine) under varied conditions.The studies on corrosion inhibition of aluminium by CoTSP and CuTSP and By virtue of their anionic character they are soluble in water and are strongly adsorbed on aluminium. Hence they can act as corrosion inhibitors. CoTSP is also known to catalyze the reduction of dioxygen.This reaction can accelerate the anodic dissolution of metal as a complementary reaction. The influence of these conflicting properties of CoTSP on the corrosion of aluminium was studied and compared with those of CuTSP.In the course of these investigations a number of gadgets like cell for measuring the electrical conductivity of solids under non-isothermal conditions, low power rf oscillator and a rotating disc electrode were fabricated.

Studies on polymer blends with special reference to NBR/PVC and CR/PVC blends

The study is undertaken on PVC blends because of their all-round importance-One of the most prominent needs of PVC in application end-use is permanent plasticizationlo. Butadiene-acrylonitrile rubber (NBR) has been utilized as permanent plasticizer for PVC since the 1940s for wire and cable insulation, food contact, and pondliners used for oil containment23'24. Also plasticized PVC has been added to vulcanizable nitrile rubber, to yield improved ozone, thermal ageing, and chemical resistance resulting in applications including fuel hose covers, gaskets, conveyor belt covers, and printing roll covers. This blend is miscible in the range of 23 to 45 per cent acrylonitrile content in the butadiene-acrylqnitrile copolymerzs. The first phase of the study was directed towards modification blends. These blends, in addition to the polymers, require a host of additives like curatives for the NBR phase and stabilizers for the PVC phase26of the existing PVC blends, especially NBR/PVC. The second phase of the study was directed towards the development of novel PVC based blends. Chloroprene rubber (polychloroprene) (CR) is structurally similar to PVC and hence is likely to form successful blends with PVC32.

Nonlinear and magneto-optical transmission studies on magnetic nanofluids of non-interacting metallic nickel nanoparticles

Oxide free stable metallic nanofluids have the potential for various applications such as in thermal management and inkjet printing apart from being a candidate system for fundamental studies. A stable suspension of nickel nanoparticles of ∼5 nm size has been realized by a modified two-step synthesis route. Structural characterization by x-ray diffraction and transmission electron microscopy shows that the nanoparticles are metallic and are phase pure. The nanoparticles exhibited superparamagnetic properties. The magneto-optical transmission properties of the nickel nanofluid (Ni-F) were investigated by linear optical dichroism measurements. The magnetic field dependent light transmission studies exhibited a polarization dependent optical absorption, known as optical dichroism, indicating that the nanoparticles suspended in the fluid are non-interacting and superparamagnetic in nature. The nonlinear optical limiting properties of Ni-F under high input optical fluence were then analyzed by an open aperture z-scan technique. The Ni-F exhibits a saturable absorption at moderate laser intensities while effective two-photon absorption is evident at higher intensities. The Ni-F appears to be a unique material for various optical devices such as field modulated gratings and optical switches which can be controlled by an external magnetic field

VUV-Laserablation von Spinnenseide

Spinnenseide gehört zu den stabilsten bekannten Polymerverbindungen. Spinnfäden können bis auf das Dreifache ihrer ursprünglichen Länge gedehnt werden, bevor sie reißen, und dabei mit rund 160 MJ/m³ mehr als dreimal soviel Energie absorbieren wie die stärkste synthetisch hergestellte Faser Kevlar (50 MJ/m³). Dabei weisen Spinnfäden mit 2 bis 5 Mikrometer nur ein Zehntel des Durchmessers eines menschlichen Haares auf. Das präzise, berührungslose Bearbeiten von Spinnenseide ist für verschiedene technische Anwendungen interessant, insbesondere wenn dabei ihre außergewöhnlichen Eigenschaften erhalten bleiben. Könnten die von Natur aus dünnen Seidenfäden gezielt in ihrem Durchmesser verringert werden, so wären sie unter anderem in der Mikroelektronik einzusetzen. Hier könnten sie als Trägermaterial für eine dünne, elektrisch leitfähige Schicht fungieren. Man erhielte Nanodrähte, die auch in mechanisch besonders belasteten Mikroelektronikbauteilen (MEMS) Verwendung finden könnten. In dieser Arbeit wird die Verwendung der laserinduzierten Ablation zur gezielten Bearbeitung von Haltefäden der Schwarzen Witwe (Latrodectus hesperus) beschrieben. Eingesetzt wurde ein VUV-Excimerlaser vom Typ LPF 205 (Lambda-Physik, Göttingen) mit einer Wellenlänge von 157 nm und einer Pulsdauer von 18 ns. Eine berührungslose Laserbearbeitung bei 157 nm erlaubt einen effizienten und präzisen Abtrag von Material durch Ablation aufgrund der geringen optischen Eindringtiefe von unter 100 nm oberhalb einer Schwellenfluenz (Energie/Fläche) von Φth=29 mJ/cm², ohne dabei das umgebende Material thermisch zu beeinträchtigen. Parallel zur Ablation setzt allerdings eine wellenförmige Oberflächenstrukturierung auf der Faseroberfläche ein, wodurch die mechanische Belastbarkeit der Faser entscheidend geschwächt wird. Die Ursache hierfür liegt im Abbau materialbedingter Spannungsfelder („stress release“) innerhalb einer durch das Laserlicht induzierten dünnen Schmelzschicht. Im Rahmen dieser Arbeit ist es nun gelungen, diese Strukturen durch einen anschließenden Glättungsprozeß zu entfernen. Dabei wird auf der bestrahlten Oberfläche mittels Laserlichts eine glatte Ablation erzielt. Mit feinerer Abstufung dieser Prozeßschritte konnte der Durchmesser des verwendeten Spinnenseidefadens zum Teil um 70 Prozent bis auf ca. 750 nm verringert werden. Durch Zugfestigkeitsexperimente wurde belegt, daß die mechanischen Eigenschaften der so bearbeiteten Spinnenseide weitgehend erhalten bleiben. Die im Rahmen dieser Arbeit angewandte Methode erlaubt somit eine präzise Laserablation von Spinnenseide und ähnlichen hochabsorbierenden Materialien, ohne deren Kernsubstanz in ihrer Beschaffenheit zu verändern.

Successful rescue and field establishment of native banana varieties severely affected by rhizome rot

Rhizome rot disease caused by Erwinia spp. is emerging as a major problem in banana nurseries and young plantations worldwide. Management of the disease is possible only in the initial stages of development. Currently no method is available for rescuing plant material already infected with this pathogen. A total of 95 Nanjanagud Rasabale and 212 Elakki Bale suckers were collected from different growing regions of Karnataka, India. During nursery maintenance of these lines, severe Erwinia infection was noticed. We present a method to rescue infected plants and establish them under field conditions. Differences were noticed in infection severity amongst the varieties and their accessions. Field data revealed good establishment and growth of most rescued plants under field conditions. The discussed rescue protocol coupled with good field management practices resulted in 89.19 and 82.59 percent field establishment of previously infected var. Nanjanagud Rasabale and var. Elakki Bale plants, respectively.

PowerPoint - basic skills training

This step-by-step guided worksheet and accompanying PowerPoint file introduce some key skills: - reorganising slides and bullets - creating speaker notes - printing slide handouts - including hyperlinks - adding images Simple stuff, but many find it useful - it uses Office 2004 (XP)

Making a PDF (Photoshop)

Video on how to create a basic PDF for standard paper based Printing using Photoshop. Ideal format for all printers worldwide.

Creación de la estructura de plan de empresa para crecimiento de empresa de tampografía

El objetivo de este trabajo es la estructura de un plan de empresa para el crecimiento de ASERPUBLIMPRESOS, teniendo en cuenta los diferentes análisis que se deben realizar para determinar la gran capacidad y desarrollo que esta empresa obtiene. El propósito de ASERPUBLIMPRESOS es llegar a cubrir las necesidades de los clientes , prestando un optimo servicio y calidad en los productos e insumos que se utilizan. Aprovechando la experiencia de los integrantes, el conocimiento en el mercado y los contactos que se tiene en el sector.

Digital Output

Slides from Lecture on making PDF's - the de facto standard for printing and setting up your own publishing and distribution channel via a Blog!

Privacy

Privacy is a concept that has been with us for hundreds of years, but it is relatively recently (the last 130 years or so) that it has been seen as something that needs protection as a legal right. Technology has presented many challenges to privacy, from the printing press to recording devices to communication hacking, but Social Media seems to present something new - a phenomenon of people giving up their personal information to an extent that would be considered extraordinary just a generation ago. In this lecture we look at attitudes and behaviors around privacy, see how social norms have shaped our expectations of privacy, and how we have come to trade our privacy for value, making complex (and sometimes ill-informed) risk decisions. We will also explore how people really behave on Social Media systems, to see whether we (as a society) should be concerned about modern attitudes to privacy, and whether there are any advantages that might balance that concern. Finally we look at how technology can be applied to the problems of privacy, both as a preventative measure, but also by aiding transparency and helping people to make better privacy decisions. These slides were updated for 2014.

Setting up New Managed Printers

Video guides for Staff and Students on how to set up the Konica Minolta Managed Printers at WSA using a Mac Lion and Snow Leopard. Support is provided by iSolutions and Serviceline on x25656