Geology of Hebes Chasma, Valles Marineris, Mars

Hebes Chasma is an 8 km deep, 126 by 314 km, isolated basin that is partially filled with interior layered deposits (ILD), massive deposits of water altered strata. By analyzing the ILD’s structure, stratigraphy and mineralogy, as well as the perimeter faults exposed in the plateau adjacent to the chasma, the evolution and depositional history of Hebes Chasma is interpreted. Three distinct ILD units were found and are informally referred to as the Lower, Upper and Late ILDs. These units have differing layer thicknesses, layer attitudes, mineralogies and erosional landforms. Based on observations of the plateau, wall morphology and slump blocks within the chasma’s interior, chasma evolution appears to be controlled by cross-faults that progressively detached sections of the wall. A scenario involving the loss of subsurface volume and ash fall events is proposed as the dominant setting throughout Hebes’ geologic history.

Receipt to James Donegan

Receipt to James Donegan for work done on the Mrs. Alice Ash house. The receipt is from the Port Dalhousie Thorold Railway Company, Sept. 1, 1856.

Facteurs socioéconomiques associés à l’usage des médicaments psychotropes chez les hommes et les femmes âgés de 65 à 74 ans vivant dans la communauté : l’étude internationale sur la mobilité des personnes âgées (IMIAS).

Objectif de l’étude : Estimer l'association entre la position socioéconomique et l'utilisation des médicaments psychotropes dans cinq populations différentes chez les personnes âgées de 65-74 ans. Méthode : L'échantillon d'étude était composé de 1995 personnes avec des données issues de la première vague de collecte de 2012 faite par l’International Mobility in Aging Study (IMIAS). Il se composait de 401 participants de Saint- Hyacinthe (Québec), 398 de Kingston (Ontario), 394 personnes âgées de Tirana (Albanie), 400 de Manizales (Colombie) et 402 de Natal (Brésil). Tous les médicaments psychotropes consommés pendant les 15 derniers jours ont été identifiés au cours d'une visite à domicile et codés selon la classification ATC. Les médicaments psychotropes inclus étaient les anxiolytiques, sédatifs et hypnotiques (ASH), les antidépresseurs (ADP) et les analgésiques/antiépileptiques/antiParkinson (AEP). Les associations entre la prévalence de la consommation des médicaments psychotropes et l'éducation, le revenu et l’occupation ont été estimés avec des ratios de prévalence (RP) obtenus en ajustant une régression de Poisson et en utilisant le modèle comportemental de Andersen et Newman sur l'utilisation des services de santé et en contrôlant les besoins (les maladies chroniques et la dépression), les facteurs prédisposants (âge et sexe) ainsi que les facteurs facilitants (en utilisant le site d'étude en tant que mandataire des facteurs lié au système de santé et à l'environnement). Résultats : Les personnes âgées vivant dans les sites canadiens consommaient plus de médicaments psychotropes que celles vivant dans les sites à l'extérieur du Canada, elles consommaient moins d’ASH à Manizales et ne consommaient pas d’ADP en Albanie. Les inégalités socioéconomiques varient selon les sites. Dans les sites canadiens, le faible niveau socioéconomique était associée à une plus grande consommation de médicaments psychotropes : en particulier, les personnes à faible niveau d’instruction consommaient plus d’antidépresseurs et celles à faible revenu consommaient plus d’AEP. Dans les sites de recherche d'Amérique latine, les personnes âgées de niveau d’instruction et de revenu élevé consommaient plus antidépresseurs et celles avec des occupations manuelles consommaient plus d’analgésiques/antiépileptiques/antiParkinson. À Tirana (Albanie), il n'y avait pas de consommation de médicaments antidépresseurs, mais la consommation d’ASH était plus élevée chez les personnes à faible revenu. Les analyses multivariées du modèle final cache les différences entre les sites qui se sont révélées dans les analyses spécifiques au niveau du Canada, de l’Amérique Latine et d’Albanie. Conclusion : Il existe des inégalités socioéconomiques liées à la consommation des médicaments psychotropes chez les personnes âgées. Ces inégalités varient selon les sites. L'utilisation des médicaments psychotropes était plus fréquente chez les personnes les moins instruites et les plus pauvres au Canada alors que l'inverse était vrai dans les sites d'Amérique latine. L'Albanie était caractérisée par une absence de consommation d'antidépresseurs alors qu’il y avait une plus grande utilisation des anxiolytiques, sédatifs et hypnotiques dans les groupes à faible revenu.

Application of Fermentation Techniques in the Utilization of Prawn Shell Waste

The present study aimed at the utlisation of microbial organisms for the production of good quality chitin and chitosan. The three strains used for the study were Lactobacillus plantarum, Lactobacililus brevis and Bacillus subtilis. These strains were selected on the basis of their acid producing ability to reduce the pH of the fermenting substrates to prevent spoilage and thus caused demineralisation of the shell. Besides, the proteolytic enzymes in these strains acted on proteinaceous covering of shrimp and thus caused deprotenisation of shrimp shell waste. Thus the two processes involved in chitin production can be affected to certain extent using bacterial fermentation of shrimp shell.Optimization parameters like fermentation period, quantity of inoculum, type of sugar, concentration of sugar etc. for fermentation with three different strains were studied. For these, parameters like pH, Total titrable acidity (TTA), changes in sugar concentration, changes in microbial count, sensory changes etc. were studied.Fermentation study with Lactobacillus plantarum was continued with 20% w/v jaggery broth for 15 days. The inoculum prepared yislded a cell concentration of approximately 108 CFU/ml. In the present study, lactic acid and dilute hydrochloric acid were used for initial pH adjustment because; without adjusting the initial pH, it took more than 5 hours for the lactic acid bacteria to convert glucose to lactic acid and during this delay spoilage occurred due to putrefying enzymes active at neutral or higher pH. During the fermentation study, pH first decreased in correspondence with increase in TTA values. This showed a clear indication of acid production by the strain. This trend continued till their proteolytic activity showed an increasing trend. When the available sugar source started depleting, proteolytic activity also decreased and pH increased. This was clearly reflected in the sensory evaluation results. Lactic acid treated samples showed greater extent of demineralization and deprotenisation at the end of fermentation study than hydrochloric acid treated samples. It can be due to the effect of strong hydrochloric acid on the initial microbial count, which directly affects the fermentation process. At the end of fermentation, about 76.5% of ash was removed in lactic acid treated samples and 71.8% in hydrochloric acid treated samples; 72.8% of proteins in lactic acid treated samples and 70.6% in hydrochloric acid treated samples.The residual protein and ash in the fermented residue were reduced to permissible limit by treatment with 0.8N HCI and 1M NaOH. Characteristics of chitin like chitin content, ash content, protein content, % of N- acetylation etc. were studied. Quality characteristics like viscosity, degree of deacetylation and molecular weight of chitosan prepared were also compared. The chitosan samples prepared from lactic acid treated showed high viscosity than HCI treated samples. But degree of deacetylation is more in HCI treated samples than lactic acid treated ones. Characteristics of protein liquor obtained like its biogenic composition, amino acid composition, total volatile base nitrogen, alpha amino nitrogen etc. also were studied to find out its suitability as animal feed supplement.Optimization of fermentation parameters for Lactobacillus brevis fermentation study was also conducted and parameters were standardized. Then detailed fermentation study was done in 20%wlv jaggery broth for 17 days. Also the effect of two different acid treatments (mild HCI and lactic acid) used for initial pH adjustment on chitin production were also studied. In this study also trend of changes in pH. changes in sugar concentration ,microbial count changes were similar to Lactobacillus plantarum studies. At the end of fermentation, residual protein in the samples were only 32.48% in HCI treated samples and 31.85% in lactic acid treated samples. The residual ash content was about 33.68% in HCI treated ones and 32.52% in lactic acid treated ones. The fermented residue was converted to chitin with good characteristics by treatment with 1.2MNaOH and 1NHCI.Characteristics of chitin samples prepared were studied and extent of Nacetylation was about 84% in HCI treated chitin and 85%in lactic acid treated ones assessed from FTIR spectrum. Chitosan was prepared from these samples by usual chemical method and its extent of solubility, degree of deacetylation, viscosity and molecular weight etc were studied. The values of viscosity and molecular weight of the samples prepared were comparatively less than the chitosan prepared by Lactobacillus plantarum fermentation. Characteristics of protein liquor obtained were analyzed to determine its quality and is suitability as animal feed supplement.Another strain used for the study was Bacillus subtilis and fermentation was carried out in 20%w/v jaggery broth for 15 days. It was found that Bacillus subtilis was more efficient than other Lactobacillus species for deprotenisation and demineralization. This was mainly due to the difference in the proteolytic nature of the strains. About 84% of protein and 72% of ash were removed at the end of fermentation. Considering the statistical significance (P

Studies on the Microbial spoilage of Penaeus indicus

The aim of the present investigation is to build up the knowledge on the role of commensal bacteria present on the prawns during storage at various temperatures. The study Evaluates the nature of spoilage of prawns during storage at three different temperatures (28:2OC, 4°C and -18°C) by organoleptic assessment, accumulation of trim ethylamine, ammonia content, changes in the flesh pH and total heterotrophic bacterial population at various time intervals and to find out the changes in the proximate composition (protein, carbohydrate, lipid, ash and moisture) of the prawns during storage at various temperatures by estimating the contents at different time intervals along with spoilage assessment. The researcher studies the occurrence and role of various bacterial genera which form the component of spoilage flora during storage and determines the distribution of various hydrolytic enzyme producing bacteria by evaluating their ability to produce enzymes such as caseinase, gelatinase, amylase, lipase and urease. to assess the spoilage potential of the bacteria by testing their ability to reduce trimethylamine oxide (TMAO) to trimethylamine (TMA) and to produce odour in flesh broth and halos in flesh agar media.The researcher also gives stress on the growth kinetics of selected potential spoilers by growing_them in different media and to assess the effect of sodium chloride concentrations, temperature and pH on their growth, survival and. generation time.

Behaviour of laterised normal and self compacting concrete subjected to elevated temperatures

Concrete is a universal material in the construction industry. With natural resources like sand and aggregate, fast depleting, it is time to look for alternate materials to substitute these in the process of making concrete. There are instances like exposure to solar radiation, fire, furnaces, and nuclear reactor vessels, special applications like missile launching pads etc., where concrete is exposed to temperature variations In this research work, an attempt has been made to understand the behaviour of concrete when weathered laterite aggregate is used in both conventional and self compacting normal strength concrete. The study has been extended to understand the thermal behaviour of both types of laterised concretes and to check suitability as a fire protection material. A systematic study of laterised concrete considering parameters like source of laterite aggregate, grades of Ordinary Portland Cement (OPC) and types of supplementary cementitious materials (fly ash and GGBFS) has been carried out to arrive at a feasible combination of various ingredients in laterised concrete. A mix design methodology has been proposed for making normal strength laterised self compacting concrete based on trial mixes and the same has also been validated. The physical and mechanical properties of laterised concretes have been studied with respect to different variables like exposure temperature (200°C, 400°C and 600°C) and cooling environment (air cooled and water cooled). The behaviour of ferrocement elements with laterised self compacting concrete has also been studied by varying the cover to mesh reinforcement (10mm to 50mm at an interval of 10mm), exposure temperature and cooling environment.

Studies on some aspects of the reproductive physiology of the female grey mullet mugil cephalus l.

Aquaculture is the dynamic pursuit of production of organisms from water a process analogous to agriculture on land. The field of aquaculture is an emerging bioindustry, based upon the culture and husbandry of economically utilizable aquatic organisms. Of late, there has been a global upsurge for aquaculture, the main reasons for which include the requirement of protein source for the increasing world population, the decision by various world nations to increase the fish yield by developing unutilized or partially utilized water bodies and depletion of natural stock which is evident in recent years due to excessive exploitation .The present study has been taken up on the reproductive physiology of the female grey mullet, M. cephalus. The thesis is presented in seven chapters. In the present study, variations in the major biochemical parameters namely, moisture, proteins, lipids, carbohydrates cholesterol, carotenoid, ash, calcium and iron in four tissues E. muscle, liver, ovary and bloodserum of cephalus have been analysed at different maturity stages.

Utilization of rice by-products in rubber

The thesis consists of seven chapters. The first chapter is a general introduction on rice by-products, their composition and utilization at present. The different milling processes adopted in paddy and the major by-products obtained from these processes viz. rice husk, rice bran, rice bran oil and rice husk ash are described. The physical properties and chemical composition of the rice husk and its general uses are given in detail. The chemical composition of the rice bran and its separation from paddy is also included. The details of solvent extraction process used for obtaining rice bran oil and also its chemical constitution is discussed in this chapter. Also described is the preparation and the different uses of rice husk ash. A literature survey is also done on the utilization of rice by-products in rubber and plastics as on today. The scope and objectives of the present study is also included at the end of this chapter.

Efficacy of fermented prawn shell waste as a feed ingredient for Indian white prawn, Fenneropenaeus indicus

Prawn shell waste collected from shrimp-processing plants in Cochin, India, was subjected to fermentation using 20 chitinoclastic and proteolytic/non-proteolytic bacterial strains. The products generated were analysed for protein, lipid, total sugars, N-acetyl glucosamine, free amino acids and ash. Shrimp diets were prepared using these 20 fermented products and a control diet using raw prawn shell waste. Feeding experiment was conducted with postlarvae (PL21) of Indian white prawn, Fenneropenaeus indicus for a period of 21 days. Biogrowth parameters such as mean weight gain, feed conversion ratio, specific growth rate and protein efficiency ratio were estimated and the animals were challenged with white spot virus orally via diet. Enhanced growth could be observed in prawns fed F134 and F124, incorporated with the fermentation products generated using Bacillus spp., C134 and C124 respectively. The percentage survival of prawns after 7 days of challenge was found to be highest for groups fed diet F111 incorporated with fermentation product generated using Bacillus sp. These products of bacterial fermentation hold promise as growth enhancers and immunostimulants in aquaculture. KEY WORDS: biogrowth parameters, feed

A structural investigation relating to the pozzolanic activity of rice husk ashes

Various factors determine the applicability of rice husk ash (RHA) as a pozzolanic material. The amount and accessibility of reactive sites is thought to be a key factor. A structural study of RHA samples in relation to their reactivity has been performed; Silica in RHA formed by burning rice husk in a laboratory furnace under continuous supply of air have been characterized as a function of incineration temperature, time and cooling regime. The characterization methods included chemical analyses, conductivity measurements, microscopic analysis, X-ray diffraction (XRD) and 29Si magic-angle spinning (MAS) nuclear magnetic resonance (NMR). In line with earlier observations, the analyses show that the highest amounts of amorphous silica occur in samples burnt in the range of 500 °C–700 °C. The 29Si NMR data allow direct identification of the reactive silanol sites in the RHA samples. De-convolution of the NMR spectra clearly shows that the quickly cooled RHA resulting from burning rice husk for 12 h at 500 °C has the highest amount of silanol groups. This sample also induced the largest drop in conductivity when added to a saturated calcium hydroxide solution giving an indication of its reactivity towards lime. Therefore, this RHA is the favorable sample to be used as pozzolanic cement additive

Behavior of geopolymer concrete exposed to elevated temperatures

The research in the area of geopolymer is gaining momentum during the past 20 years. Studies confirm that geopolymer concrete has good compressive strength, tensile strength, flexural strength, modulus of elasticity and durability. These properties are comparable with OPC concrete.There are many occasions where concrete is exposed to elevated temperatures like fire exposure from thermal processor, exposure from furnaces, nuclear exposure, etc.. In such cases, understanding of the behaviour of concrete and structural members exposed to elevated temperatures is vital. Even though many research reports are available about the behaviour of OPC concrete at elevated temperatures, there is limited information available about the behaviour of geopolymer concrete after exposure to elevated temperatures. A preliminary study was carried out for the selection of a mix proportion. The important variable considered in the present study include alkali/fly ash ratio, percentage of total aggregate content, fine aggregate to total aggregate ratio, molarity of sodium hydroxide, sodium silicate to sodium hydroxide ratio, curing temperature and curing period. Influence of different variables on engineering properties of geopolymer concrete was investigated. The study on interface shear strength of reinforced and unreinforced geopolymer concrete as well as OPC concrete was also carried out. Engineering properties of fly ash based geopolymer concrete after exposure to elevated temperatures (ambient to 800 °C) were studied and the corresponding results were compared with those of conventional concrete. Scanning Electron Microscope analysis, Fourier Transform Infrared analysis, X-ray powder Diffractometer analysis and Thermogravimetric analysis of geopolymer mortar or paste at ambient temperature and after exposure to elevated temperature were also carried out in the present research work. Experimental study was conducted on geopolymer concrete beams after exposure to elevated temperatures (ambient to 800 °C). Load deflection characteristics, ductility and moment-curvature behaviour of the geopolymer concrete beams after exposure to elevated temperatures were investigated. Based on the present study, major conclusions derived could be summarized as follows. There is a definite proportion for various ingredients to achieve maximum strength properties. Geopolymer concrete with total aggregate content of 70% by volume, ratio of fine aggregate to total aggregate of 0.35, NaOH molarity 10, Na2SiO3/NaOH ratio of 2.5 and alkali to fly ash ratio of 0.55 gave maximum compressive strength in the present study. An early strength development in geopolymer concrete could be achieved by the proper selection of curing temperature and the period of curing. With 24 hours of curing at 100 °C, 96.4% of the 28th day cube compressive strength could be achieved in 7 days in the present study. The interface shear strength of geopolymer concrete is lower to that of OPC concrete. Compared to OPC concrete, a reduction in the interface shear strength by 33% and 29% was observed for unreinforced and reinforced geopolymer specimens respectively. The interface shear strength of geopolymer concrete is lower than ordinary Portland cement concrete. The interface shear strength of geopolymer concrete can be approximately estimated as 50% of the value obtained based on the available equations for the calculation of interface shear strength of ordinary portland cement concrete (method used in Mattock and ACI). Fly ash based geopolymer concrete undergoes a high rate of strength loss (compressive strength, tensile strength and modulus of elasticity) during its early heating period (up to 200 °C) compared to OPC concrete. At a temperature exposure beyond 600 °C, the unreacted crystalline materials in geopolymer concrete get transformed into amorphous state and undergo polymerization. As a result, there is no further strength loss (compressive strength, tensile strength and modulus of elasticity) in geopolymer concrete, whereas, OPC concrete continues to lose its strength properties at a faster rate beyond a temperature exposure of 600 °C. At present no equation is available to predict the strength properties of geopolymer concrete after exposure to elevated temperatures. Based on the study carried out, new equations have been proposed to predict the residual strengths (cube compressive strength, split tensile strength and modulus of elasticity) of geopolymer concrete after exposure to elevated temperatures (upto 800 °C). These equations could be used for material modelling until better refined equations are available. Compared to OPC concrete, geopolymer concrete shows better resistance against surface cracking when exposed to elevated temperatures. In the present study, while OPC concrete started developing cracks at 400 °C, geopolymer concrete did not show any visible cracks up to 600 °C and developed only minor cracks at an exposure temperatureof 800 °C. Geopolymer concrete beams develop crack at an early load stages if they are exposed to elevated temperatures. Even though the material strength of the geopolymer concrete does not decrease beyond 600 °C, the flexural strength of corresponding beam reduces rapidly after 600 °C temperature exposure, primarily due to the rapid loss of the strength of steel. With increase in temperature, the curvature at yield point of geopolymer concrete beam increases and thereby the ductility reduces. In the present study, compared to the ductility at ambient temperature, the ductility of geopolymer concrete beams reduces by 63.8% at 800 °C temperature exposure. Appropriate equations have been proposed to predict the service load crack width of geopolymer concrete beam exposed to elevated temperatures. These equations could be used to limit the service load on geopolymer concrete beams exposed to elevated temperatures (up to 800 °C) for a predefined crack width (between 0.1mm and 0.3 mm) or vice versa. The moment-curvature relationship of geopolymer concrete beams at ambient temperature is similar to that of RCC beams and this could be predicted using strain compatibility approach Once exposed to an elevated temperature, the strain compatibility approach underestimates the curvature of geopolymer concrete beams between the first cracking and yielding point.

Etablierung neuer Methoden zur in vitro Kultivierung der Baumart Fraxinus excelsior L. und Entwicklung von Verfahren zur Kryokonservierung von in vitro Sprossspitzen

Die hier vorliegende Arbeit wurde im Rahmen eines europäischen Projektes mit dem Titel „Improving Fraxinus (Ash) productivity for European needs by testing, selection, propagation and promotion of improved genetic resources“ an der Niedersächsischen Forstlichen Versuchsanstalt, Abteilung Waldgenressourcen erstellt. Im Rahmen des Projektes wurden 62 Plusbäume aus einem 15 Jahre alten europäischen Herkunfts-/ Nachkommenschaftsversuch in den Niedersächsischen Forstämtern Bovenden und Dannenberg nach den Kriterien Stammform und Wuchsleistung für die vegetative Vermehrung ausgewählt. Ziel dieser Arbeit war die Optimierung bestehender in vitro Protokolle sowie die Entwicklung eines bisher noch nicht existierenden Kryokonservierungsprotokolls für in vitro Sprossspitzen. Im ersten Teil dieser Arbeit wird die Entwicklung des in vitro Protokolls für Fraxinus excelsior dargestellt. Die Optimierung der Methoden zur Etablierung, Vermehrung und Bewurzelung erfolgte durch Versuchsreihen mit unterschiedlichen Klonen, so dass insgesamt 26 der selektierten Plusbäume erfolgreich in vitro etabliert werden konnten. Achselknospen frischer Triebe der Pfropflinge der Mutterbäume stellten die beste Explantatquelle dar. Die Explantate wurden mit 0,2 % Quecksilberchlorid (HgCl2) oberflächensterilisiert bevor sie auf hormonfreies Woody Plant Medium (WPM) transferiert wurden. Nach zwei Wochen erfolgte ein Transfer auf WPM mit 4 mg/l 6-Benzylaminopurine (BAP) und 0,15 mg/l Indole-3-butyric acid (IBA). Die besten Vermehrungsraten wurden auf WPM mit 4 mg/l BAP, 0,15 mg/l IBA und 0,01 mg/l TDZ und 0,7 % Agar in Honiggläsern mit einem Plastikdeckel erzielt. Als Bewurzelungsmedium wurde 0,5 konzentriertes Murashige und Skoog (MS) Medium mit 2 mg/l IBA, 0,25 mg/l BAP und 0,8 % Agar verwandt. Im zweiten Teil der Arbeit werden die Versuchsreihen zur Entwicklung des Kryokonservierungsprotokolls von in vitro Sprossspitzen dargestellt. Zur Entwicklung der Methode wurden die Vorbehandlungsbedingungen verbessert und zwei Techniken, die Alginat- / Dehydrati-onsmethode und die Vitrifikationsmethode mit Hilfe der sogenannten PVS2-Lösung (Plant Vitrification solution number 2) getestet. Die optimierte PVS2-Methode erwies sich als die für Esche besser geeignete Technik und ließ sich erfolgreich zur Kryokonservierung juveniler und adulter Kulturen anwenden. Die Regenerationsraten lagen zwischen 50 und 100 % für juvenile bzw. 50 und 80 % für adulte Kulturen.

Spechte als ökologische Indikatoren in Natur- und Wirtschaftswäldern im Bialowiera-Wald (Ostpolen)

Die vorliegende Untersuchung analysiert die Eignung der "Spechtgemeinschaft" als ökologische Indikatorengruppe und formuliert vor dem Hintergrund der Ergebnisse Forderungen und Empfehlungen für einen "spechtgerechten" Umgang mit Wäldern. Die Habitatnutzung von sieben Spechtarten beim Nahrungserwerb wurde über einen Zeitraum von zwei Jahren in urwaldartigen und forstlich genutzten Beständen verschiedener Waldgesellschaften systematisch beobachtet. Das Untersuchungsgebiet ist der Bialowieza-Wald im äußersten Osten Polens, wo in enger räumlicher Nachbarschaft Natur- und Wirtschaftswaldflächen bearbeitet werden konnten. Die Beobachtungen erfolgten zwischen Anfang März 1999 und Ende Februar 2001 und wurden zu allen Jahreszeiten durchgeführt. Vier der insgesamt sechs Probeflächen repräsentieren die wichtigste Laubwaldgesellschaft des Gebietes, das Tilio-Carpinetum, die übrigen zwei die wichtigste Nadelwaldgesellschaft, das Peucedano-Pinetum. Die Hälfte der zwischen 42 und 54 ha großen Probeflächen lag im streng geschützten Urwaldreservat des Bialowieza-Nationalparkes, die übrigen in forstlich genutzten Waldbeständen. Zusätzlich wurde ein 2,5 km langes Transekt durch bewirtschafteten Erlen-Eschen-Auenwald und sehr naturnahen Erlenbruch bearbeitet. Die Probeflächen wurden in ein Raster aus 50x50m großen Quadranten unterteilt. Zur Beobachtung der Spechte beim Nahrungserwerb erfolgten 21 Begehungen je Probefläche bzw. Transekt. Die Probeflächen wurden dazu auf parallelen Linien mit Abständen von je 100m begangen, Startpunkt und Startrichtung wurden variiert. Zur Charakterisierung der Vegetation und Bestandesstruktur erfolgten Erhebungen zur Baumartenzusammensetzung, Größenklassenverteilung der Bäume, Totholzanteil und Krautvegetation. 1332 Beobachtungen von Spechten beim Nahrungserwerb konnten ausgewertet werden. Der Buntspecht wurde in allen Flächen am häufigsten gesehen. Mittel-, Weißrücken- und Kleinspecht wurden überwiegend in den Tilio-Carpineten beobachtet, in den Naturwäldern häufiger als in den bewirtschafteten Beständen. Der Dreizehenspecht wurde im Nadelwald und stärker mit Fichten durchmischtem Laubwald angetroffen. Bei Schwarz- und Grauspecht konnte keine klare Vorliebe für bestimmte Waldgesellschaften ermittelt werden. Der Buntspecht ernährte sich vor allem im Herbst und Winter überwiegend von fetthaltigen Samen und wurde dann meist beim Bearbeiten von Fichten- oder Kiefernzapfen in Schmieden beobachtet. Der Mittelspecht suchte als "Sammelspecht" seine Nahrung vor allem an den Oberflächen der Stämme und Äste. Klein-, Weißrücken-, Dreizehen- und Schwarzspecht traten als Hackspechte in Erscheinung. Die wenigen Daten zum Grauspecht reichen nicht zur Ermittlung der bevorzugten Nahrungserwerbstechnik aus. Bei Bunt-, Mittel- und Weißrückenspecht konnte eine deutliche Vorliebe für die Stieleiche als Nahrungsbaum nachgewiesen werden. Der Dreizehenspecht ist jedoch die einzige der beobachteten Arten mit einer weitgehenden Spezialisierung auf eine bestimmte Baumart, er nutzte in allen Waldgesellschaften meist die Fichte. Insgesamt bevorzugten die Spechte Bäume mit großen Stammdurchmessern, beim Kleinspecht ist diese Vorliebe allerdings nur schwach ausgeprägt. Totholz wurde von Weißrücken-, Dreizehen- und Kleinspecht bei der Nahrungssuche bevorzugt, vom Mittelspecht jedoch nur gelegentlich genutzt. Beim Buntspecht zeigte der Totholz-Nutzungsanteil erhebliche Unterschiede zwischen verschiedenen Baumarten. Liegendes Totholz spielte in den Tilio-Carpineten im Vergleich zu stehendem Totholz und toten Teilen lebender Bäume nur eine geringe Rolle für Nahrung suchende Spechte.

Zur Reaktionskinetik der Oxidation von Kohlenstoffmaterialien aus Biomasse

Zur Modellierung von Vergasungs- und Verbrennungsprozessen zur energetischen Nutzung von Biomasse ist die Kenntnis von reaktionskinetischen Daten für die Sauerstoff-Oxidation von Biomassepyrolysaten erforderlich. Eine ausführliche Literaturübersicht zeigt den Stand der Forschung bezüglich der experimentellen Ermittlung von reaktionskinetischen Parametern für die Oxidation von Pyrolysaten aus Lignin, Cellulose und pflanzlicher Biomasse sowie der Suche nach einem plausiblen Reaktionsmechanismus für die Reaktion von Sauerstoff mit festen Kohlenstoffmaterialien. Es wird eine Versuchsanlage mit einem quasistationär betriebenen Differentialreaktor konstruiert, die eine Messung der Reaktionskinetik und der reaktiven inneren Oberfläche (RSA) für die Reaktion eines Pyrolysats aus Maispflanzen mit Sauerstoff ermöglicht. Die getrockneten und zerkleinerten Maispflanzen werden 7 Minuten lang bei 1073 K in einem Drehrohrofen pyrolysiert. Das Pyrolysat zeichnet sich vor allem durch seine hohe Porosität von über 0,9 und seinen hohen Aschegehalt von 0,24 aus. Die RSA wird nach der Methode der Messung von Übergangskinetiken (TK) bestimmt. Die Bestimmung der RSA erfolgt für die Reaktionsprodukte CO und CO2 getrennt, für die entsprechend ermittelten Werte werden die Bezeichnungen CO-RSA und CO2-RSA eingeführt. Die Abhängigkeit dieser Größen von der Sauerstoffkonzentration läßt sich durch eine Langmuir-Isotherme beschreiben, ebenso das leichte Absinken der CO-RSA mit der Kohlendioxidkonzentration. Über dem Abbrand zeigen sich unterschiedliche Verläufe für die CO-RSA, CO2-RSA und die innere Oberfläche nach der BET-Methode. Zur Charakterisierung der Oberflächenzwischenprodukte werden temperaturprogrammierte Desorptionsversuche (TPD) durchgeführt. Die Ergebnisse zeigen, daß eine Unterscheidung in zwei Kohlenstoff-Sauerstoff-Oberflächenkomplexe ausreichend ist. Die experimentellen Untersuchungen zum Oxidationsverlauf werden im kinetisch bestimmten Bereich durchgeführt. Dabei werden die Parameter Temperatur, Sauerstoff-, CO- und CO2-Konzentration variiert. Anhand der Ergebnisse der reaktionskinetischen Untersuchungen wird ein Reaktionsmechanismus für die Kohlenstoff-Sauerstoff-Reaktion entwickelt. Dieser Reaktionsmechanismus umfaßt 7 Elementarreaktionen, für welche die reaktionskinetischen Parameter numerisch ermittelt werden. Darüber hinaus werden reaktionskinetische Parameter für einfachere massenbezogene Reaktionsgeschwindigkeitsansätze berechnet und summarische Reaktionsgeschwindigkeitsansätze für die Bildung von CO und CO2 aus dem Reaktionsmechanismus hergeleitet.

Hyperspectral field measurements to determine dry matter yield and nutritive value of legume-grass swards

Summary: Productivity, botanical composition and forage quality of legume-grass swards are important factors for successful arable farming in both organic and conventional farming systems. As these attributes can vary considerably within a field, a non-destructive method of detection while doing other tasks would facilitate a more targeted management of crops, forage and nutrients in the soil-plant-animal system. This study was undertaken to explore the potential of field spectral measurements for a non destructive prediction of dry matter (DM) yield, legume proportion in the sward, metabolizable energy (ME), ash content, crude protein (CP) and acid detergent fiber (ADF) of legume-grass mixtures. Two experiments were conducted in a greenhouse under controlled conditions which allowed collecting spectral measurements which were free from interferences such as wind, passing clouds and changing angles of solar irradiation. In a second step this initial investigation was evaluated in the field by a two year experiment with the same legume-grass swards. Several techniques for analysis of the hyperspectral data set were examined in this study: four vegetation indices (VIs): simple ratio (SR), normalized difference vegetation index (NDVI), enhanced vegetation index (EVI) and red edge position (REP), two-waveband reflectance ratios, modified partial least squares (MPLS) regression and stepwise multiple linear regression (SMLR). The results showed the potential of field spectroscopy and proved its usefulness for the prediction of DM yield, ash content and CP across a wide range of legume proportion and growth stage. In all investigations prediction accuracy of DM yield, ash content and CP could be improved by legume-specific calibrations which included mixtures and pure swards of perennial ryegrass and of the respective legume species. The comparison between the greenhouse and the field experiments showed that the interaction between spectral reflectance and weather conditions as well as incidence angle of light interfered with an accurate determination of DM yield. Further research is hence needed to improve the validity of spectral measurements in the field. Furthermore, the developed models should be tested on varying sites and vegetation periods to enhance the robustness and portability of the models to other environmental conditions.