Impact of operator experience on information feedback and reusability

Keeping a record of operator experience remains a challenge to operation management and a major source of inefficiency in information management. The objective is to develop a framework that enables an explicit presentation of experience based on information use. A purposive sampling method is used to select four small and medium-sized enterprises as case studies. The unit of analysis is the production process in the machine shop. Data collection is by structured interview, observation and documentation. A comparative case analysis is applied. The findings suggest experience is an accumulation of tacit information feedback, which can be made explicit in information use interoperatability matrix. The matrix is conditioned upon information use typology, which is strategic in waste reduction. The limitations include difficulty of participant anonymity where the organisation nominates a participant. Areas for further research include application of the concepts to knowledge management and shop floor resource management.

Tongue-tied?: An Active Analysis of Brian Friel's Translations

This article has arisen from a research-led production of Translations by Brian Friel for Queen’s University’s Tyrone Guthrie Society in February 2010. Drawing partly on a review of the existing critical literature and also from questions left unresolved by a previous experience of directing the play, the production sought to address through ‘active analysis’ (Merlin 2001) a number of research questions relating to the embodied nature of the rehearsal process and the historicity of Friel’s play. The analysis invokes Bergson (1910), Lefebvre (1991) and Worthern (2006) in establishing a performative correlative for insightful but more literary studies by Connolly (1993), Lojek (1994) and McGrath (1989 & 1999). A detailed account of the rehearsal process helps reveal the extent to which the idea of failure of communication is embedded in the text and embodied in performance, while an experiment with the partial use of the Irish language casts further light on Friel’s extraordinary device of rendering two languages through the medium of one. The use of music to counterpoint, rather than underscore the action, together with an achronological sequence of projected historical images inspired by Andrews (1983) provided me as director a means to challenge the audience’s presuppositions about the play. The sense of palimpsest, of the layered histories, that this evoked also served to highlight Friel’s use of the wider stylistic palette of Anglo-Irish drama, revealing Translations as a forerunner for Stewart Parker’s more explicit formal experiments in Northern Star. In rehearsal and performance Friel’s place in the continuum of the Irish theatrical canon became clear, as stylistic allusions to O’Casey, Shaw, Wilde and Beckett were embodied by the actors on the rehearsal room floor.

Holothurians – potential biomonitors for metal levels in deep-sea sediments

Levels of cadmium, copper, aluminium, iron, manganese and zinc (Cd, Cu, Al, Fe, Mn and Zn) in deep-sea sediments and sediment-feeding holothurians are reported. Profiles of metals were found to vary with depth in the sediment. Holothurian foregut metal values are generally closer to surficial sediment levels, whereas body wall levels, with the exception of Cd and Cu, were generally lower. Holothurians are presented as potential biomonitors of metal concentrations in the deep-sea floor environment.

Clustering and synchrony in laying hens: The effect of environmental resources on social dynamics

Laying hens generally choose to aggregate, but the extent to which the environments in which we house them impact on social group dynamics is not known. In this paper the effect of pen environment on spatial clustering is considered. Twelve groups of four laying hens were studied under three environmental conditions: wire floor (W), shavings (Sh) and perches, peat, nestbox and shavings (PPN). Groups experienced each environment twice, for five weeks each time, in a systematic order that varied from group to group. Video recordings were made one day per week for 30 weeks. To determine level of clustering, we recorded positional data from a randomly selected 20-min excerpt per video (a total of 20 min x 360 videos analysed). On screen, pens were divided into six equal areas. In addition, PPN pens were divided into an additional four (sub) areas, to account for the use of perches (one area per half perch). Every 5 s, we recorded the location of each bird and calculated location use over time, feeding synchrony and cluster scores for each environment. Feeding synchrony and cluster scores were compared against unweighted and weighted (according to observed proportional location use) Poisson distributions to distinguish between resource and social attraction.

Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading

Cold-formed steel sections are often used as wall studs or floor joists; such sections often include web holes for ease of installation of the services. Cold-formed steel design codes, however, do not consider the effect of such web holes. In this paper, a combination of experimental tests and non-linear elasto-plastic finite element analyses are used to investigate the effect of such holes on web crippling under interior-two-flange (ITF) loading conditions; the cases of both flange fastened and flange unfastened are considered. A good agreement between the experimental tests and finite element analyses was obtained. The finite element model was then used for the purposes of a parametric study on the effect of different sizes and position of holes in the web. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the depth of the web, and the ratio of the distance from the edge of the bearing to the flat depth of web. Design recommendations in the form of web crippling strength reduction factors are proposed, that are conservative to both the experimental and finite element results.

Accelerating Multiple Sequence Alignment with the Cell BE Processor

The Cell Broadband Engine (BE) Architecture is a new heterogeneous multi-core architecture targeted at compute-intensive workloads. The architecture of the Cell BE has several features that are unique in high-performance general-purpose processors, most notably the extensive support for vectorization, scratch pad memories and explicit programming of direct memory accesses (DMAs) and mailbox communication. While these features strongly increase programming complexity, it is generally claimed that significant speedups can be obtained by using Cell BE processors. This paper presents our experiences with using the Cell BE architecture to accelerate Clustal W, a bio-informatics program for multiple sequence alignment. We report on how we apply the unique features of the Cell BE to Clustal W and how important each is in obtaining high performance. By making extensive use of vectorization and by parallelizing the application across all cores, we demonstrate a speedup of 24.4 times when using 16 synergistic processor units on a QS21 Cell Blade compared to single-thread execution on the power processing unit. As the Cell BE exploits a large number of slim cores, our highly optimized implementation is just 3.8 times faster than a 3-thread version running on an Intel Core2 Duo, as the latter processor exploits a small number of fat cores.

The Lake House Extension

The project comprises of the re-ordering and extension of a 19th century country house in the extreme south west of Ireland. The original house is what can be termed an Irish house of the middle size. A common typology in 19th century Ireland the classical house of the middle size is characterised by a highly ordered plan containing a variety of rooms within a square or rectangular form. A strategy of elaborating the threshold between the reception rooms of the house and the garden was adopted by wrapping the house in a notional forest of columns creating deep verandas to the south and west
of the main living spaces. The grid of structural columns derived its proportions directly from the house. The columns became analogous with the mature oak and pine trees in the garden beyond while the floor and ceiling were considered as landscapes in their own right, with the black floor forming hearth stone, kitchen island and basement cellar and the concrete roof inflected to hold roof lights, a chimney and a landscape of pleasure on the roof above.

Aims / Objectives / Questions
1To restore and extend a “house of the middle size”, a historic Irish typology, in a sympathetic manner.
2To address the new build accommodation in a sustainable manner through strategies associated with orientation, micro climates, materiality and engineering both mechanical and structural.
3To explore and develop an understanding for two spatial orders, the enfilade room and non directional space of the grid.
4The creation of deep threshold space.
5Marbling as a finish in fair faced concrete
6Concrete as a sustainable building material

Spatial Heterogeneity and Kinetic Regulation of Arsenic Dynamics in Mangrove Sediments: The Sundarbans, Bangladesh

The biogeochemistry of arsenic (As) in sediments is regulated by multiple factors such as particle size, dissolved organic matter (DOM), iron mobilization, and sediment binding characteristics, among others. Understanding the heterogeneity of factors affecting As deposition and the kinetics of mobilization, both horizontally and vertically, across sediment depositional environments was investigated in Sundarban mangrove ecosystems, Bengal Delta, Bangladesh. Sediment cores were collected from 3 different Sundarbans locations and As concentration down the profiles were found to be more associated with elevated Fe and Mn than with organic matter (OM). At one site chosen for field monitoring, sediment cores, pore and surface water, and in situ diffusive gradients in thin films (DGT) measurements (which were used to model As sediment pore-water concentrations and resupply from the solid phase) were sampled from four different subhabitats. Coarse-textured riverbank sediment porewaters were high in As, but with a limited resupply of As from the solid phase compared to fine-textured and high organic matter content forest floor sediments, where porewater As was low, but with much higher As resupply. Depositional environment (overbank verses forest floor) and biological activity (input of OM from forest biomass) considerably affected As dynamics over very short spatial distances in the mosaic of microhabitats that constitute a mangrove ecosystem.

Glacial to paraglacial history and forest recovery in the Oglio glacier system (Italian Alps) between 26 and 15 ka cal BP

The integrated stratigraphic, radiocarbon and palynological record from an end-moraine system of the Oglio valley glacier (Italian Alps), propagating a lobe upstream in a lateral reach, provided evidence for a complete cycle of glacial advance, culmination and withdrawal during the Last Glacial Maximum and early Lateglacial. The glacier culminated in the end moraine shortly after 25.8 +/- 0.8 ka cal BP, and cleared the valley floor 18.3-17.2 +/- 0.3 ka cal BP. A primary paraglacial phase is then recorded by fast progradation of the valley floor.

As early as 16.7 +/- 0.3 ka cal BP, early stabilization of alluvial fans and lake filling promoted expansion of cembran pine. This is an unprecedented evidence of direct tree response to depletion of paraglacial activity during the early Lateglacial, and also documents the cembran pine survival in the mountain belt of the Italian Alps during the last glaciation. Between 16.1 and 14.6 +/- 0.5 ka cal BP, debris cones emplacement points to a moisture increase favouring tree Betula and Pinus sylvestris-mugo. A climate perturbation renewed paraglacial activity. According to cosmogenic ages on glacial deposits and AMS radiocarbon ages from lake records in South-Eastern Alps such phase compares favourably with the Gschnitz stadial and with the oscillations recorded at lakes Ragogna. Langsee and Jeserzersee, most probably forced by the latest freshening phases of the Heinrich Event 1.

A further sharp pine rise marks the subsequent onset of Bolling interstadial. The chronology of the Oglio glacier compares closely with major piedmont glaciers on the Central and Eastern Alpine forelands. On the other hand, the results of the present study imply a chronostratigraphic re-assessment of the recent geological mapping of the Central Italian Alps. (C) 2012 Elsevier Ltd. All rights reserved.

Three dimensional analysis of the lamina cribrosa in glaucoma

Background/aim: Structural changes in the lamina cribrosa have been implicated in the pathogenesis of glaucomatous optic atrophy. The aim of this study was to determine a measure the surface variability of the cup floor in normal subjects and patients with glaucoma. Methods: A sample of age matched normal subjects (NN), patients with low tension glaucoma (LTG), and primary open angle glaucoma (POAG) were included in the study. The glaucoma groups were matched for the severity of the visual field loss. Mean 10 degree topographic images of normal and glaucomatous eyes from the Heidelberg retina tomograph were imported into ERDAS image processing software where topographic analysis of the cup floor could be assessed. Each image was processed using customised spatial filters that calculated the surface depth variation in localised neighbourhood areas across each image. The local change in depth across the cup floor surface was determined and compared between the three clinical groups. Results: The depth variation in the cup floor was largest in normal subjects followed by LTG and POAG. Highly statistically significant differences in surface depth variability of the cup floor existed between normal and LTG (p=0.005), between normal and POAG (p

Optimising the locations of thermally sensitive equipment in an aircraft crown compartment

A Design of Experiments (DoE) analysis was undertaken to generate a list of configurations for CFD numerical simulation of an aircraft crown compartment. Fitted regression models were built to predict the convective heat transfer coefficients of thermally sensitive dissipating elements located inside this compartment. These are namely the SEPDC and the Route G. Currently they are positioned close to the fuselage and it is of interest to optimise the heat transfer for reliability and performance purposes. Their locations and the external fuselage surface temperature were selected as input variables for the DoE. The models fit the CFD data with values ranging from 0.878 to 0.978, and predict that the optimum locations in terms of heat transfer are when the elements are positioned as close to the crown floor as possible ( and ?min. limits), where they come in direct contact with the air flow from the cabin ventilation system, and when they are positioned close to the centreline ( and ?CL). The methodology employed allows aircraft thermal designers to optimise equipment placement in confined areas of an aircraft during the design phase. The determined models should be incorporated into global aircraft numerical models to improve accuracy and reduce model size and computational time. © 2012 Elsevier Masson SAS. All rights reserved.

An experimental and numerical investigation into the seismic performance of a multi-storey concentrically braced plan irregular structure

In this investigation, the seismic torsional response of a multi-storey concentrically braced frame (CBF) plan irregular structure is evaluated numerically and experimentally through a series of hybrid tests. CBF structures have become popular in seismic design because they are one of the most efficient types of steel structures to resist earthquake loading. However, their response under plan irregular conditions has received little focus mostly in part
due to their complex behaviour under seismic loading conditions. The majority of research on the seismic response of plan irregular structures is based purely on numerical investigations. This paper provides much needed experimental investigation of the seismic response of a CBF plan irregular structure with the aim of characterising the response of this class of structure. The effectiveness of the Eurocode 8 torsional effects provision as a method of designing for
low levels of mass eccentricity is evaluated. Results indicate that some of the observations made by purely numerical models are valid in that; torsionally stiff structures perform well and the stiff side of the structure is subjected to a greater ductility demand compared to the flexible side of the structure. The Eurocode 8 torsional effects provision is shown to be adequate in terms of ductility and interstorey drift however the structure performs poorly
in terms of floor rotation. Importantly, stiffness eccentricity occurs when the provision is applied to the structure when no mass eccentricity exists and results in a significant increase in floor rotations.

3D Analysis of Seepage under Hydraulic Structures with Intermediate Filters

Seepage flow under hydraulic structures provided with intermediate filters has been investigated. The flow through the banks of the canal has been included in the model. Different combinations of intermediate filter and canal width were studied. Different lengths of the floor, differential heads, and depths of the sheet pile driven beneath the floor were also investigated. The introduction of an intermediate filter to the floor of hydraulic structures reduced the uplift force acting on the downstream floor by up to 72%. The maximum uplift reduction occurred when the ratio of the distance of filter location downstream from the cutoff to the differential head was 1. Introducing a second filter in the downstream side resulted in a further reduction in the exit hydraulic gradient and in the uplift force, which reached 90%. The optimum locations of the two filters occurred when the first filter was placed just downstream of the cutoff wall and the second filter was placed nearly at the middistance between the cutoff and the end toe of the floor. The results showed significant differences between the three-dimensional (3D) and the two-dimensional (2D) analyses.

Pull-out forces in shear connectors in composite beams with large web openings

Composite beams with large web openings are often used, and their design is controlled by Vierendeel bending at the four corners of each opening, which is assisted by local composite action with the floor slab. Development of this Vierendeel bending resistance may be limited by pull-out failure of the shear connectors. In this paper, a non-linear elasto-plastic finite element model of a composite beam with web openings was used to investigate this mode of pull-out failure. A test was performed on a typical composite slab in which the shear connectors were subject to pure tension and the failure load was 67 kN, which is approximately 70% of the longitudinal shear resistance. The results of the finite element model are compared against those obtained using the established design theory, that does not limit the vertical pull-out resistance of the shear connectors. It is shown that the local bending resistance due to composite action should be reduced when limited by pull-out of the shear connectors. A parametric study investigated the effect of openings of 600 to 1200 mm length. A simple model is developed to establish the Vierendeel bending resistance, when limited by pull-out of the shear connectors.

Transmit Antenna Selection for Interference Management in Cognitive Relay Networks

We propose transmit antenna selection (TAS) in decode-and-forward (DF) relaying as an effective approach to reduce the interference in underlay spectrum sharing networks with multiple primary users (PUs) and multiple antennas at the secondary users (SUs). We compare two distinct protocols: 1) TAS with receiver maximal-ratio combining (TAS/MRC) and 2) TAS with receiver selection combining (TAS/SC). For each protocol, we derive new closed-form expressions for the exact and asymptotic outage probability with independent Nakagami-m fading in the primary and secondary networks. Our results are valid for two scenarios related to the maximum SU transmit power, i.e., P, and the peak PU interference temperature, i.e., Q. When P is proportional to Q, our results confirm that TAS/MRC and TAS/SC relaying achieve the same full diversity gain. As such, the signal-to-noise ratio (SNR) advantage of TAS/MRC relaying relative to TAS/SC relaying is characterized as a simple ratio of their respective SNR gains. When P is independent of Q, we find that an outage floor is obtained in the large P regime where the SU transmit power is constrained by a fixed value of Q. This outage floor is accurately characterized by our exact and asymptotic results.