An investigation of yarn snarling and balloon flutter instabilities in ring spinning

This article reports theoretical and experimental investigation on yarn snarling and balloon fluttering in ring spinning. Yarn snarling and balloon fluttering affect yarn breakage in ring spinning. The theoretical model has incorporated the tangential component of air drag on a ballooning yarn, which was ignored in previous models. The results show that yarn snarling happens in the balloon when the ratio of yarn length in the balloon to balloon height is greater than a specific value that depends on the yarn type and count. Yarn tension experiences an obvious change before and after yarn snarling. The balloon flutter appears between normal balloons while the balloon loops are changing. Fluttering balloon shapes that oscillate periodically between two and three loop configurations as yarn tension varies periodically have also been observed experimentally.

The effect of yarn hairiness on air drag in ring spinning

Air drag on yarn and package surfaces affects yarn tension, which in turn affects energy consumption and ends-down in ring spinning. This study investigated the effects of yarn hairiness on air drag in ring spinning. Theoretical models of skin friction coefficient on the surface of rotating yarn packages were developed. The predicted results were verified with experimental data obtained from cotton and wool yarns. The results show that hairiness increases the air drag by about one-quarter and one-third for the rotating cotton and wool yarn packages, respectively. In addition, yarn hairiness increases the air drag by about one-tenth on a ballooning cotton yarn.

Evalutaion of the implementation of the folate-neural tube defect health claim and its impact on the availability of folate-fortified food in Australia

Objective: To evaluate the implementation of the folate-neural tube defect (NTD) health claim and its impact on the availability of folate-fortifed food in Australia.

Methods: During late 2005, a survey was conducted in 16 supermarkets across all Australian capital cities to identify the use of the folate-NTD health claim on the labels of the 128 food products listed in food standard 1.1A.2: 'Transitional standard - Health claims' and the number of products fortifed with folic acid.

Results: Seventy-nine per cent of existing listed food products were found and two of these were implementing the folate-NTD health claim. Forty-four per cent of these listed products, previously fortifed with folic acid, were no longer fortifed. One hundred and seventeen generally available food products were fortifed with folic acid, predominantly breakfast cereals (73%). Twenty-seven per cent of these folate-fortifed products were listed in the transitional standard.

Conclusions: The health claim was not used widely to inform women of child-bearing age of the importance of periconceptional folate intake. The increased availability of folate-fortifed products generally has occurred independently of the health claim. Defciencies in the verifcation system of the tested regulatory framework are identifed. The voluntary regulatory provisions for both folate fortifcation and the use of the health claim diminished the States' infuence over their implementation of public health tools.

Simulation and experimental validation of a ring spinning process

Ring spinning is the most important system of making high quality yarns in the textile industry. Yarn tension affects yarn breakage, which in turn affects yarn productivity in ring spinning. Accurate information about how various spinning parameters affect yarn tension is essential for the optimisation of the ring spinning process. In this paper, a program to simulate the ring spinning process was developed using MATLAB, which can predict yarn tension under given spinning conditions. The simulation results were verified with experimental results obtained from ring spinning cotton and wool yarns.

Understanding ring strain and ring flexibility in six - and eight-membered cyclic organometallic group 14 oxides

A simple model was developed for the approximation of ring strain energies of homo- and heterometallic, six- and eight-membered cyclic organometallic group 14 oxides and the degree of puckering of their ring conformations. The conformational energy of a ring is modelled as the sum of its angular strain components. The bending potential energy functions for the various endocyclic M–O–M′ and O–M–O linkages (M, M′=Si, Ge, Sn) were calculated at the B3LYP/(v)TZ level of theory using H3MOM′H3 and H2M(OH)2 as model compounds. For the six-membered rings, the minimum total angular contribution to ring strain, ERSGmin was calculated to decrease in the order: cyclo-(H2SiO)3 (13.0 kJ mol−1)>cyclo-H2Sn(OSiH2)2O (7.0 kJ mol−1)>cyclo-H2Ge(OSiH2)2O (4.9 kJ mol−1)>cyclo-H2Si(OSnH2)2O (3.4 kJ mol−1)>cyclo-(H2SnO)3 (1.7 kJ mol−1)>cyclo-H2Si(OGeH2)2O (0.8 kJ mol−1)≈cyclo-H2Ge(OSnH2)2O (0.7 kJ mol−1)>cyclo-H2Sn(OGeH2)2O (0.1 kJ mol−1)≈cyclo-(H2GeO)3 (0 kJ mol−1). All of the six-membered rings were predicted to adopt (nearly) planar conformations (a=0.996<a<1). By contrast, all eight-membered rings were predicted to adopt strainless, but puckered conformations. The degree of puckering was predicted to increase in the order: cyclo-(H2SiO)4 (a=0.983)<cyclo-H2Sn(OSiH2O)2SiH2 (a=0.959)<cyclo-(H2SiO)2(H2SnO)2 (a=0.942)< cyclo-H2Si(OSnH2O)2SiH2 (a=0.935)<cyclo-(H2SnO)4 (a=0.916)<cyclo-(H2GeO)4 (a=0.885). The differences in ring strain and the degree of puckering were linked to the different electronegativities of Si, Ge and Sn. The results obtained are consistent with experimental ring strain energies; reactivities towards ring opening polymerizations or ring expansion reactions and observed ring conformations of cyclic organometallic group 14 oxides.

Recent studies on yarn tension and energy consumption in ring spinning

High energy consumption remains a key challenge for the widely used ring spinning system. Tackling this challenge requires a full understanding of the various factors that contribute to yarn tension and energy consumption during ring spinning. In this paper, we report our recent experimental and theoretical research on air drag, yarn tension and energy consumption in ring spinning. A specially constructed rig was used to simulate the ring spinning process; and yarn tension at the guide-eye was measured for different yarns under different conditions. The effect of yarn hairiness on the air drag acting on a rotating yarn package and on a ballooning yarn was examined. Models of the power requirements for overcoming the air drag, increasing the kinetic energy of the yarn package (bobbin and wound yarn) and overcoming the yarn wind-on tension were developed. The ratio of energy-consumption to yarn-production over a full yarn package was discussed. A program to simulate yarn winding in ring spinning was implemented, which can generate the balloon shape and predict yarn tension under a given spinning condition. The simulation results were verified with experimental results obtained from spinning cotton and wool yarns.

Investigation of effective material properties in composites with internal defect or reinforcement particles

This paper is concerned with the investigation of the effective material properties of internally defective or particle-reinforced composites. An analysis was carried out with a novel method using the two-dimensional special finite element method mixing the concept of equivalent homogeneous materials. A formulation has been developed for a series of special finite elements containing an internal defect or reinforcement in order to assure the high accuracy especially in the vicinity of defects or reinforcements. The adoption of the special finite element can greatly simplify numerical modeling of particle-composites. The numerical result provides the effective material properties of particle-reinforced composite and explains that the size of particles has great influence on the material properties. Numerical examples also demonstrate the validity and versatility of the proposed method by comparing with existing results from literatures.

Positivism: one ring to rule them all? A tale of information systems research methodology

The tale of research methodology in information systems is told through the fantasy of Tolkien’s Lord of the Rings. The tale is intended to be at once a piece of light hearted fun in its placement of the struggles of research methodology as an epic story but, in the tradition of the court jester, attempts to provide a new perspective on Information Systems (IS) research methodology and our struggles with positivism in particular. Our tale is one of developing a greater maturity and confidence in IS methodology and introduces postmodern methodologies to Information Systems. Our tale, our pastiche, is itself postmodern.

Modelling yarn balloon motion in ring spinning

Air-drag on a ballooning yarn and balloon shape affect the yarn tension and ends-down (yarn breakage), which in turn affects energy consumption and yarn productivity in ring spinning. In this article, a mathematical model of yarn ballooning motion in ring spinning is established. The model can be used to generate balloon shape and predict tension in the ballooning yarn under given spinning conditions. Yarn tension was measured using a computer data acquisition system and the balloon shapes were captured using a digital camera with video capability during the experiments using cotton and wool yarns at various balloon-heights and with varying yarn-length in the balloon. The air-drag coefficients on ballooning cotton and wool yarns in ring spinning were estimated by making a “best fit” between the theoretical and experimental turning points. The theoretical results were verified with experimental data. The effects of air-drag and balloon shape on yarn tension are discussed.

The origin of ring strain and conformational flexibility in Tri- and Tetrasiloxane Rings and their heavier group 14 congeners

Never change a winning team. Since the appearance of the first volume in 1994 this series has become a well respected forum, and like its highly successful predecessors, this sixth volume again brings together leading experts from academia and industry to provide a comprehensive and critical survey of the frontiers of current industrial and university research. - Synthesis and characterization of new organosilicon compounds - Applications in polymer and materials science - Summary of the latest research results The result is a unique compendium with two volumes of first-hand information, vital for all experts working in this field.

Trapping of a spiral-like intermediate of the bacterial cytokinetic protein FtsZ

The earliest stage in bacterial cell division is the formation of a ring, composed of the tubulin-like protein FtsZ, at the division site. Tight spatial and temporal regulation of Z-ring formation is required to ensure that division occurs precisely at midcell between two replicated chromosomes. However, the mechanism of Z-ring formation and its regulation in vivo remain unresolved. Here we identify the defect of an interesting temperature-sensitive ftsZ mutant (ts1) of Bacillus subtilis. At the nonpermissive temperature, the mutant protein, FtsZ(Ts1), assembles into spiral-like structures between chromosomes. When shifted back down to the permissive temperature, functional Z rings form and division resumes. Our observations support a model in which Z-ring formation at the division site arises from reorganization of a long cytoskeletal spiral form of FtsZ and suggest that the FtsZ(Ts1) protein is captured as a shorter spiral-forming intermediate that is unable to complete this reorganization step. The ts1 mutant is likely to be very valuable in revealing how FtsZ assembles into a ring and how this occurs precisely at the division site.

A ring-based architectural model for middle agents in agent-based system

In agent-based systems, the performance of middle agents not only relies on the matchmaking algorithms employed by them, but also the architecture that organizes them with suitable organizational structure and coordination mechanism. In this paper, we contribute a framework and develop a couple of middle agents with logical ring organizational structure to match requester agents with service provider agents. The middle agent is of the features of proliferation and self-cancellation according to the sensory input from its environment. The token-based coordination mechanism of middle agents is designed. Two kinds of middle agents, namely, host and duplicate, are designed for promoting the scalability and robustness of agent-based systems. We demonstrate the potentials of the architecture by case study.

Improving the quality of die castings by using artificial neural networks for porosity defect modelling

The aim of this work is to improve the quality of castings by minimizing defects and scrap through the analysis of the data generated by High Pressure Die Casting (HPDC) Machines using computational intelligence techniques. Casting is a complex process that is affected by the interdependence of die casting process parameters on each other such that changes in one parameter results in changes in other parameters. Computational intelligence techniques have the potential to model accurately this complex relationship. The project has the potential to generate optimal configurations for HPDC Machines and explain the relationships between die casting process parameters.