A Framework supporting collaboration on the distributed design of integrated systems

The work described in this thesis aims to support the distributed design of integrated systems and considers specifically the need for collaborative interaction among designers. Particular emphasis was given to issues which were only marginally considered in previous approaches, such as the abstraction of the distribution of design automation resources over the network, the possibility of both synchronous and asynchronous interaction among designers and the support for extensible design data models. Such issues demand a rather complex software infrastructure, as possible solutions must encompass a wide range of software modules: from user interfaces to middleware to databases. To build such structure, several engineering techniques were employed and some original solutions were devised. The core of the proposed solution is based in the joint application of two homonymic technologies: CAD Frameworks and object-oriented frameworks. The former concept was coined in the late 80's within the electronic design automation community and comprehends a layered software environment which aims to support CAD tool developers, CAD administrators/integrators and designers. The latter, developed during the last decade by the software engineering community, is a software architecture model to build extensible and reusable object-oriented software subsystems. In this work, we proposed to create an object-oriented framework which includes extensible sets of design data primitives and design tool building blocks. Such object-oriented framework is included within a CAD Framework, where it plays important roles on typical CAD Framework services such as design data representation and management, versioning, user interfaces, design management and tool integration. The implemented CAD Framework - named Cave2 - followed the classical layered architecture presented by Barnes, Harrison, Newton and Spickelmier, but the possibilities granted by the use of the object-oriented framework foundations allowed a series of improvements which were not available in previous approaches: - object-oriented frameworks are extensible by design, thus this should be also true regarding the implemented sets of design data primitives and design tool building blocks. This means that both the design representation model and the software modules dealing with it can be upgraded or adapted to a particular design methodology, and that such extensions and adaptations will still inherit the architectural and functional aspects implemented in the object-oriented framework foundation; - the design semantics and the design visualization are both part of the object-oriented framework, but in clearly separated models. This allows for different visualization strategies for a given design data set, which gives collaborating parties the flexibility to choose individual visualization settings; - the control of the consistency between semantics and visualization - a particularly important issue in a design environment with multiple views of a single design - is also included in the foundations of the object-oriented framework. Such mechanism is generic enough to be also used by further extensions of the design data model, as it is based on the inversion of control between view and semantics. The view receives the user input and propagates such event to the semantic model, which evaluates if a state change is possible. If positive, it triggers the change of state of both semantics and view. Our approach took advantage of such inversion of control and included an layer between semantics and view to take into account the possibility of multi-view consistency; - to optimize the consistency control mechanism between views and semantics, we propose an event-based approach that captures each discrete interaction of a designer with his/her respective design views. The information about each interaction is encapsulated inside an event object, which may be propagated to the design semantics - and thus to other possible views - according to the consistency policy which is being used. Furthermore, the use of event pools allows for a late synchronization between view and semantics in case of unavailability of a network connection between them; - the use of proxy objects raised significantly the abstraction of the integration of design automation resources, as either remote or local tools and services are accessed through method calls in a local object. The connection to remote tools and services using a look-up protocol also abstracted completely the network location of such resources, allowing for resource addition and removal during runtime; - the implemented CAD Framework is completely based on Java technology, so it relies on the Java Virtual Machine as the layer which grants the independence between the CAD Framework and the operating system. All such improvements contributed to a higher abstraction on the distribution of design automation resources and also introduced a new paradigm for the remote interaction between designers. The resulting CAD Framework is able to support fine-grained collaboration based on events, so every single design update performed by a designer can be propagated to the rest of the design team regardless of their location in the distributed environment. This can increase the group awareness and allow a richer transfer of experiences among them, improving significantly the collaboration potential when compared to previously proposed file-based or record-based approaches. Three different case studies were conducted to validate the proposed approach, each one focusing one a subset of the contributions of this thesis. The first one uses the proxy-based resource distribution architecture to implement a prototyping platform using reconfigurable hardware modules. The second one extends the foundations of the implemented object-oriented framework to support interface-based design. Such extensions - design representation primitives and tool blocks - are used to implement a design entry tool named IBlaDe, which allows the collaborative creation of functional and structural models of integrated systems. The third case study regards the possibility of integration of multimedia metadata to the design data model. Such possibility is explored in the frame of an online educational and training platform.

Organizations redesign and building of information systems

Develop software is still a risky business. After 60 years of experience, this community is still not able to consistently build Information Systems (IS) for organizations with predictable quality, within previously agreed budget and time constraints. Although software is changeable we are still unable to cope with the amount and complexity of change that organizations demand for their IS. To improve results, developers followed two alternatives: Frameworks that increase productivity but constrain the flexibility of possible solutions; Agile ways of developing software that keep flexibility with less upfront commitments. With strict frameworks, specific hacks have to be put in place to get around the framework construction options. In time this leads to inconsistent architectures that are harder to maintain due to incomplete documentation and human resources turnover. The main goals of this work is to create a new way to develop flexible IS for organizations, using web technologies, in a faster, better and cheaper way that is more suited to handle organizational change. To do so we propose an adaptive object model that uses a new ontology for data and action with strict normalizing rules. These rules should bound the effects of changes that can be better tested and therefore corrected. Interfaces are built with templates of resources that can be reused and extended in a flexible way. The “state of the world” for each IS is determined by all production and coordination acts that agents performed over time, even those performed by external systems. When bugs are found during maintenance, their past cascading effects can be checked through simulation, re-running the log of transaction acts over time and checking results with previous records. This work implements a prototype with part of the proposed system in order to have a preliminary assessment its feasibility and limitations.

Physiological response of American bullfrog tadpoles to stressor conditions of capture and hypoxia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physiological dose response of coffee (Coffea arabica L.) plants to glyphosate depends on growth stage

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Functional response of Telenomus remus Nixon(Hymenoptera, Scelionidae) to Spodoptera frugiperda (J. E. Smith) (Lepidoptera, Noctuidae) eggs: effect of female age

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efficacy of linear and convex transducers for ultrasound-guided transvaginal follicle aspiration

A new device was developed to hold linear transducers for transvaginal follicle aspiration. Efficacy of follicle aspiration was compared using a linear 6 MHz and a convex 5 MHz transducer. Fifty-five cows were submitted to follicle aspiration at random days of the estrous cycle. Aspirations were conducted with linear (n = 28) and convex (n = 38) transducers with 18 G needles at a negative pressure corresponding to 13 ml H2O/min. A greater number of follicles were aspirated using convex than to linear probe (12.4 versus 7.8, respectively, P < 0.05). Mean number of oocytes and recovery rates were similar for convex (5.4 and 48.6%) and linear (4.6 and 59.3%) transducers. Limited space between the linear transducer and needle guide restricted access to some portions of the ovary, reducing the number of follicles aspirated using a linear transducer. The newly developed adaptor allowed greater stability, holding the ovaries firmly against the linear transducer. This diminished mobility permitted a similar number of oocytes to be recovered with both transducers. In conclusion, this new adaptor provided a low cost alternative for routine follicle aspiration and oocyte recovery in cattle. (C) 2002 Elsevier B.V. All rights reserved.

Hypercapnic ventilatory response of anesthetized female rats subjected to neonatal maternal separation: Insight into the origins of panic attacks?

Neonatal maternal separation (NMS) is a form of stress that interferes with the regulation of the stress response, an effect that predisposes to the emergence of panic and anxiety related disorders. We previously showed that at adulthood, awake female (but not male) rats subjected to NMS show a hypercapnic ventilatory response (HCVR; 5% CO(2)) that is 63% greater than controls (Genest et al., 2007). To understand the mechanisms underlying the sex-specific effects of NMS on the ventilatory response to CO(2), we used two different anesthetized female rat preparations to assess central CO(2) chemosensitivity and contribution of sensory afferents (stretch receptors and peripheral chemoreceptors) that influence the HCVR. Data show that anesthesia eliminated the respiratory phenotype observed previously in awake females and CO(2) chemosensitivity did not differ between groups. Finally, the assessment of the ovarian hormone levels across the oestrus cycle failed to reveal significant differences between groups. Since anesthesia did not affect the manifestation of NMS-related respiratory dysfunction in males (including the hypercapnic ventilatory response) (Kinkead et al., 2005; Dumont and Kinkead, 2010), we propose that the panic or anxiety induced by CO(2) during wakefulness is responsible for enhancement of the HCVR in NMS females. (C) 2011 Elsevier B.V. All rights reserved.

Effect of environmental temperature on immune response of broilers

Several studies demonstrate that environmental temperature can influence the immune response of poultry. The objective of this research was to determine at which stage in the life of a bird this effect is greatest. In experiment 1, broiler breeder eggs were incubated at three different temperatures (36.8+/-0.2, 37.8+/-0.2, and 38.8+/-0.2degreesC from the 13th day of incubation to hatching. After hatching, birds were raised in thermoneutral temperature. In experiment 2, 144 1-d-old broiler chicks were distributed into three environmental chambers with different temperatures (18+/-2, 24+/-2, and 32+/-2degreesC). In both experiments, the humoral immune responses to Newcastle disease virus (NDV) and infectious bursal disease (IBDV) were evaluated. NDV and IBDV antibody titers were not significantly different (P > 0.05) among treatments.

Humoral immune response of water buffalo monitored with three different antigens of Toxocara vitulorum

Humoral immune response of water buffalo naturally infected with Toxocara vitulorum was monitored using three different antigens of this parasite in serum and colostrum of buffalo cows and calves. Soluble extract (Ex) and excretory/secretory (ES) larval antigens and perienteric fluid antigen (Pe) of adult T vitulorum were used to measure the antibody levels by an indirect ELISA. Serum of 7-12 buffalo cows for the first 365 days and colostrum of the same number of buffalo cows for the first 60 days of parturition, and serum of 8-10 buffalo calves for the first 365 days afterbirth were assayed. The ELISA detected antibodies against all three T vitulorum antigens in the colostrum and serum of 100% of buffalo cows and calves examined. The highest antibody levels against Ex, ES and Pe antigens were detected in the buffalo cow sera during the perinatal period and were maintained at high levels through 300 days after parturition. on the other hand, colostrum antibody concentrations of all three antigens were highest on the first day post-parturition, but decreased sharply during the first 15 days. Concomitantly to the monitoring of immune response, the parasitic status of the calves was also evaluated. In calves, antibodies passively acquired were at the highest concentrations 24 h after birth and remained at high levels until 45 days coincidentally with the peak of T vitulorum infection. The rejection of the worms by the calves occurred simultaneously with the decline of antibody levels, which reached their lowest levels between 76 and 150 days. Thereafter, probably because of the presence of adults/larvae stimulation, the calves acquired active immunity and the antibodies started to increase slightly in the serum and plateaued between the days 211 and 365. All three antigens were detected by the serum antibodies of buffalo calves; however, the concentration of anti-Pe antibody was higher than anti-EX and anti-ES, particularly after 90 days of age. By conclusion, the buffalo cows develop immunity and keep high levels of antibodies against T vitulorum-Ex, ES and Pe antigens and these antibodies are transferred to their calves through the colostrum. This passively acquired immunity does not protect the calves against the acquisition of the infection, but these antibodies, passively or actively acquired, may have an important role during worm rejection by the calves and prevention of intestinal reinfection. (C) 2004 Elsevier B.V. All rights reserved.

Response of minimally processed carambola to chemical treatments and low-oxygen atmospheres

Fresh-cut carambola (Averrhoa carambola L.) has limited marketability due to cut-surface browning. The effect of chemical treatments (ascorbic acid, citric acid and Ca-EDTA), controlled atmosphere (0.4-20.3% O-2) and the association of these processes was investigated. Post-cutting dip and low-oxygen atmospheres did not prevent discoloration or improve sensory and physicochemical parameters. However, ascorbic acid (0.5% and 1%) dips reduced polyphenol oxidase (PPO) activity during storage at 4.5 degrees C, with 1% ascorbic acid inducing the lowest activity. Although cut-surface browning of 'Maha' slices was not relevant, carambola slices treated with 1% ascorbic acid in association with 0.4% oxygen did not present significant browning or loss of visual quality for up to 12 days, 3 days longer than low oxygen alone (0.4% O-2), thus, their quality can be significantly improved by combining both treatments. (c) 2007 Elsevier B.V. All rights reserved.

Influence of husbandry systems on physiological stress reactions of captive brown brocket (Mazama gouazoubira) and marsh deer (Blastocerus dichotomus)-noninvasive analysis of fecal cortisol metabolites

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Humoral immune response of broilers fed diets containing yeast extract and prebiotics in the prestarter phase and raised at different temperatures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Response of wheat to foliar application of zinc

Wheat is grown in Brazil, mostly in no-till, a system in which the zinc can become potentially deficient, due to excessive application of acidity corrective and phosphate fertilizers in surface and, or at shallow depths. This study aimed to evaluate the effect of foliar application of zinc in agronomic characteristics and yield of wheat. The experimental design was randomized blocks with five replications. Treatments consisted of four doses of zinc (0, 54, 108 and 216g ha(-1) Zn), divided into two foliar applications, the first at tillering (18 days after plant emergence) and the second at the boot stage (65 days after emergence). Foliar application of zinc increased the number of fertile tillers and yield of wheat, however, have little effect on the agronomic characteristics of no-tilled crop with high nutrient content in soil.

PERIODIC PERTURBATION of QUADRATIC SYSTEMS WITH TWO INFINITE HETEROCLINIC CYCLES

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)