Phosphate treatment of frozen prawns. Pt. 1. Screening of various phosphates for prevention of drip loss

Various phosphates and their mixtures were screened for their efficiency of preventing drip loss in frozen prawns. The effectiveness of the phosphates decreased in the following order: Sodium tripolyphosphate — Sodium pyrophosphate — Sodium hexametaphosphate Sodium metaphosphate — Sodium dihydrogen phosphate; the last two being ineffective. Even though thaw drip loss was reduced by the above treatments the organoleptic quality of the thawed as well as cooked products was unsatisfactory, discoloration being the major defect. A solution of a mixture of 12% sodium tripolyphosphate and 8.6% sodium dihydrogen phosphate or 2% citric acid in water when used as dip prevented thaw drip loss, improved cooked yield and organoleptic quality without adversely affecting the biochemical characteristics. Commercial scale trials showed that the results are highly reproducible.

Colossal loss of shell and fin-fish larvae during collection of Penaeus monodon (Fab.) fry in the rivers of Satkhira

This study was conducted in five river-estuaries of Satkhira from January to December '96. It was found that during the collection of each Peneaus monodon) post larva (PL), about 45 larvae of other shrimps, 12 individuals of fin-fishes and 530 macro-zooplankters were mercilessly destroyed. It was also recorded that about 11.6 million of P. monodon PLs were harvested annually from the study area. The sh1dy implies that colossal loss of shell and fin-fishes and other plankton resources is done by tiger shrimp fry collectors, and such massive destruction adversely affect the natural productivity and ecological balance of the coastal environment.

Development of a new model of feeding strategy analysis of fish incorporating resource availability and use data

A feeding strategy model is proposed using stomach content and resource availability data as a modification to Costello (1990) and Amundsen et al. (1996). Incorporation of feeding electivity index (E) instead of the prey-specific abundance signifies the importance of resource availability in prey selection as well as the predator's ability to specialize, generalize or avoid particular prey items at the individual and population level.

MEASURED AND PREDICTED LOSS GENERATION IN TRANSONIC TURBINE BLADING.

For a typical transonic turbine rotor blade, designed for use with coolant ejection, the trailing edge, or base loss is three to four times the profile boundary layer loss. The base region of such a profile is dominated by viscous effects and it seems essential to attack the problem of loss prediction by solving the compressible Navier-Stokes equations. However, such an approach is inevitably compromised by both numerical accuracy and turbulence modelling constraints. This paper describes a Navier-Stokes solver written for 2D blade-blade flows and employing a simple two-layer mixing length eddy viscosity model. Then, measured and predicted losses and base pressures are presented for two transonic rotor blades and attempts are made to assess the capabilities of the Navier-Stokes solver and to outline areas for future work.

The role of farmed fish in the diets of the resource-poor in Egypt.

The Egyptian aquaculture industry provides more than 100,000 full-time or part-time jobs and produces the country’s least-expensive farmed animal protein. Thus, aquaculture plays an important role in both sustaining livelihoods and improving the diet quality and nutritional health of Egyptians, including a significant proportion of the 25.5% who are resource-poor. Recognizing this dual role, WorldFish has promoted sustainable growth in Egyptian aquaculture for more than 20 years. Through its work, WorldFish has identified a lack of quality data about fish consumption preferences and practices. Eager to fill this knowledge gap, WorldFish partnered with the Environment and Development Group (EDG) to study consumption of fish, red meat and poultry among the resource-poor in Egypt. This study aimed to characterize current consumer preferences for and consumption patterns of animal-source foods, comparing red meat, poultry and fish. The resulting data is meant to contribute to a better understanding of what drives demand for fish among the resource-poor in Egypt, allowing value chain actors to more successfully market their products to this segment of the population.

Numerical modelling of dynamic response of loss modulated monolithic multisection mode-locked semiconductor lasers

Monolithic multisection mode-locked semiconductor lasers with an integrated distributed Bragg reflector (DBR) have recently been demonstrated to generate stable picosecond pulses at high repetition rates suitable for optical communication systems. However, there has been very little theoretical work on understanding the physical mechanisms of the device and on optimisation of the absorber modulator design. This article presents numerical modeling of the loss modulated mode-locking process in these lasers. The model predicts most aspects experimentally observed within this type of device, and the results show the output waveform, optical spectrum, instantaneous frequency chirp, and stable operating range.

Density, sp3 content and internal layering of DLC films by X-ray reflectivity and electron energy loss spectroscopy

A variety of hydrogenated and non-hydrogenated amorphous carbon thin films have been characterized by means of grazing-incidence X-ray reflectivity (XRR) to give information about their density, thickness, surface roughness and layering. We used XRR to validate the density of ta-C, ta-C:H and a-C:H films derived from the valence plasmon in electron energy loss spectroscopy measurements, up to 3.26 and 2.39 g/cm3 for ta-C and ta-C:H, respectively. By comparing XRR and electron energy loss spectroscopy (EELS) data, we have been able for the first time to fit a common electron effective mass of m*/me = 0.87 for all amorphous carbons and diamond, validating the `quasi-free' electron approach to density from valence plasmon energy. While hydrogenated films are found to be substantially uniform in density across the film, ta-C films grown by the filtered cathodic vacuum arc (FCVA) show a multilayer structure. However, ta-C films grown with an S-bend filter show a high uniformity and only a slight dependence on the substrate bias of both sp3 and layering.

The wave transmission coefficients and coupling loss factors of point connected structures

This analysis is concerned with the calculation of the elastic wave transmission coefficients and coupling loss factors between an arbitrary number of structural components that are coupled at a point. A general approach to the problem is presented and it is demonstrated that the resulting coupling loss factors satisfy reciprocity. A key aspect of the method is the consideration of cylindrical waves in two-dimensional components, and this builds upon recent results regarding the energetics of diffuse wavefields when expressed in cylindrical coordinates. Specific details of the method are given for beam and thin plate components, and a number of examples are presented. © 2002 Acoustical Society of America.

Secondary flows and loss caused by blade row interaction in a turbine stage

A study of the three-dimensional stator-rotor interaction in a turbine stage is presented. Experimental data reveal vortices downstream of the rotor which are stationary in the absolute frame - indicating that they are caused by the stator exit flowfield. Evidence of the rotor hub passage vortices is seen, but additional vortical structures away from the endwalls, which would not be present if the rotor were tested in isolation, are also identified. An unsteady computation of the rotor row is performed using the measured stator exit flowfield as the inlet boundary condition. The strength and location of the vortices at rotor exit are predicted. A formation mechanism is proposed whereby stator wake fluid with steep spanwise gradients of absolute total pressure is responsible for all but one of the rotor exit vortices. This mechanism is then verified computationally using a passive-scalar tracking technique. The predicted loss generation through the rotor row is then presented and a comparison made with a steady calculation where the inlet flow has been mixed out to pitchwise uniformity. The loss produced in the steady simulation, even allowing for the mixing loss at inlet, is 10% less than that produced in the unsteady simulation. This difference highlights the importance of the time-accurate calculation as a tool of the turbomachine designer.

East African Freshwater Fisheries Research Organization Annual Report 1972

Feeding habits of many animals have been used widely in animal classifications. This is so, because the type of diet an organism requires demands structural specialisation which will utilise the available resource. Many animals may however have many structural modifications to enable them to be described as omnivourous or generalised feeders such as H. empodisma and H. riponianus (GREENWOOD 1960) which may show varying degrees of structural and adaptational intermediacy between two trophic groups. Generally, however, the diet of many animals including fish changes as the animal grow larger. The change in structural modifications is usually correlated with changes in the diet. In fishes the change may involve change from tricuspid to biscuspid and finally to unicuspid type of teeth. The degree of modification in the structure depends on the diet, thus Haplochromis that feeds on soft tissues of snails only requires modifications in oral dentition while Haplochromis that feeds on both soft tissues and shells of snails require modification in the lower pharyngeal bone for grinding purposes. Other modifications connected with food utilisation may be located in the alimentary canal. (I) The fish species that are commercially exploited are Protopterus aethiopicus, Clarias mossambicus, Tilapia esculenta, Tilapia amphimelas and Tilapia hybrids. The other fish species present in the lake but not commercially exploited are: Gnathonemus sp. Alestes sp. Labeo sp., Barbus paludinoses, Barbus jacksoni, Barbus lineomaculatus, Barbus regersi, Leptogrlanis sp., Schilbe sp., Haplochromis spp. and Hemihaplochromis sp. (2) Protopterus sp. and Clarias sp. are mostly caught with hooks on long lines. There has been a steady increase in number of hooks on the lake. Since the stocks of Protopterus and C/arias in the lake have a limit, we should control the number of hooks used by each of the fishermen in order to avoid overharvesting. (3) All the previous studies on Lake Kitangiri fisheries suggested the use of gill nets with mesh size greater than 88.9 mm in order to avoid the capture of immature Ti/apia spp. But if the fishermen are to obtain economic gains from the fishery, the optimum mesh size for use is 88.9 -101.6 mm. (4) The gillnet is a passive gear with very beneficial selective characteristics. Unfortunately the drive-in fishery which exists on Lake Kitangiri more or less destroys the gillnet selectivity characteristics. It is therefore recommended that the beating of water with poles be discouraged and stopped. (5) There is need for provision of stable fishing canoes to replace the unstable bottle palm dug-out canoes which are currently being used and which are very risky to operate. (6) The fish processing facilities on Lake Kitangiri are still inadequate. Most of the fish is sun dried, Since sun drying is very difficult during the rainy season, most fishermen carry out intensive fishing during the dry season, Concentrating most of the fishing effort in anyone season instead of spreading evenly this effort over the whole year could damage the age structure of the exploitable stocks. (7) There are considerable fluctuations in the volume of water of the lake. The feasibility of regulating the water loss through the effluent Sibiti river should be investigated by the Water Development Department. (8) Damming the Sibiti river is an expensive undertaking and therefore, the Rural Development Bank of Tanzania should be asked to assess the economic feasibility of such a project.

Investigation and comparison of inverter-fed induction machine loss

This paper presents an investigation into the losses in a three-phase induction motor under different pulse width modulation (PWM) excitation conditions. The impacts of Sinusoidal PWM, Space Vector PWM and Discontinuous PWM on machine loss are compared and studied. Finite element analysis simulations are employed to predict the machine losses with the loss breakdown analysis under different PWM schemes. Direct Calorimetric measurements are utilized to verify the finite element modeling and provide direct quantifications of machine loss under modern PWM techniques. © 2008 IEEE.

Loss comparison between an SPWM and harmonic elimination excited small, (<1kW) induction motor drive using Pspice simulation and calorimetry

Adopting square wave excitation to drive induction motors (IMs) can substantially reduce inverter switching losses. However, the low-order time harmonics inherent in the output voltage generates parasitic torques that degrade motor performance and reduce efficiency. In this paper, a novel harmonic elimination modulation technique with full voltage control is studied as an interesting and alternative means of operating small (<1kW) IM drives efficiently. A fully verified harmonic elimination scheme, which removes the 5th, 7th, 11th, 13th and 17 th time harmonics, was implemented and applied to an IGBT driven IM. The power losses incurred in the inverter and the IM as a result of the switching scheme have been determined. © 2008 Crown copyright.

Features and trend of loss of promoter-associated CpG islands in the human and mouse genomes

CpG islands (CGIs) are often considered as gene markers, but the number of CGIs varies among mammalian genomes that have similar numbers of genes. In this study, we investigated the distribution of CGIs in the promoter regions of 3,197 human-mouse ortholo