Hydrogen spillover on carbon-supported metal catalysts studied by inelastic neutron scattering. Surface vibrational states and hydrogen riding modes

Hydrogen spillover on carbon-supported precious metal catalysts has been investigated with inelastic neutron scattering (INS) spectroscopy. The aim, which was fully realized, was to identify spillover hydrogen on the carbon support. The inelastic neutron scattering spectra of Pt/C, Ru/C, and PtRu/C fuel cell catalysts dosed with hydrogen were determined in two sets of experiments: with the catalyst in the neutron beam and, using an annular cell, with carbon in the beam and catalyst pellets at the edge of the cell excluded from the beam. The vibrational modes observed in the INS spectra were assigned with reference to the INS of a polycyclic aromatic hydrocarbon, coronene, taken as a molecular model of a graphite layer, and with the aid of computational modeling. Two forms of spillover hydrogen were identified: H at edge sites of a graphite layer (formed after ambient dissociative chemisorption of H-2), and a weakly bound layer of mobile H atoms (formed by surface diffusion of H atoms after dissociative chernisorption of H-2 at 500 K). The INS spectra exhibited characteristic riding modes of H on carbon and on Pt or Ru. In these riding modes H atoms move in phase with vibrations of the carbon and metal lattices. The lattice modes are amplified by neutron scattering from the H atoms attached to lattice atoms. Uptake of hydrogen, and spillover, was greater for the Ru containing catalysts than for the Pt/C catalyst. The INS experiments have thus directly demonstrated H spillover to the carbon support of these metal catalysts.

Anion directed template synthesis of Cu(II) complexes of a N,N,O donor mono-condensed Schiff base ligand: A molecular scaffold forming highly ordered H-bonded rectangular grids

Anion directed, template syntheses of two dinuclear copper(II) complexes of mono-condensed Schiff base ligand Hdipn (4-[(3-aminopentylimino)-methyl]-benzene-1,3-diol) involving 2,4- dihydroxybenzaldehyde and 1,3-diaminopentane were realized in the presence of bridging azide and acetate anions. Both complexes, [Cu-2(dipn)(2)(N-3)(2)] (1) and [Cu-2(dip(n))(2)(OAc)(2)] (2) have been characterized by X-ray crystallography. The two mononuclear units are joined together by basal-apical, double end-on azido bridges in complex 1 and by basal-apical, double mono-atomic acetate oxygen-bridges in 2. Both complexes form rectangular grid-like supramolecular structures via H-bonds connecting the azide or acetate anion and the p-hydroxy group of 2,4- dihydroxybenzaldehyde. Variable-temperature (300-2 K) magnetic susceptibility measurements reveal that complex 1 has antiferromagnetic coupling (J = -2.10 cm (1)) through the azide bridge while 2 has intra-dimer ferromagnetic coupling through the acetate bridge and inter-dimer antiferromagnetic coupling through H-bonds (J = 2.85 cm (1), J' = -1.08 cm (1)). (C) 2009 Elsevier B. V. All rights reserved.

Probiotics: their potential to impact human health

Probiotics—live microorganisms that when administered in adequate amounts confer a health benefit on the host—have been studied for both human and animal applications, and worldwide research on this topic has accelerated in recent years. This paper reviews the literature on probiotics, describes how probiotics work in human ecosystems, and outlines the impact of probiotics on human health and disease. The paper also addresses safety issues of probiotic use, suggests future developments in the field of probiotics, and provides research and policy recommendations. Product considerations and potential future developments regarding probiotics also are discussed. The authors conclude that controlled human studies have revealed a diverse range of health benefits from consumption of probiotics, due largely to their impact on immune function or on microbes colonizing the body. Additional, well-designed and properly controlled human and mechanistic studies with probiotics will advance the essential understanding of active principles, mechanisms of action, and degree of effects that can be realized by specific consumer groups. Recommendations include establishment of a standard of identity for the term “probiotic,” adoption of third-party verification of label claims, use of probiotics selectively in clinical conditions, and use of science-based assessment of the benefits and risks of genetically engineered probiotic microbes.

Antipsychotic drug action: antagonism, inverse agonism or partial agonism

The positive, psychotic symptoms of schizophrenia can be treated by antipsychotic drugs and it has been assumed that these are antagonists at the D-2 and D-3 dopamine receptors in the brain. Recently, the D-2/D-3 partial agonist aripiprazole has been introduced as an antipsychotic drug. It has also been realized that, using in vitro assays, the other antipsychotic drugs are in fact inverse agonists at D-2/D-3 dopamine receptors. This raises questions about how these disparate drugs can achieve a similar clinical outcome. In this review, I shall consider the efficacies of these drugs in signalling assays and how these efficacies might affect treatment outcomes. It seems that the treatment outcome might depend on the overall level of cell stimulation, which is in turn dependent on the level of residual dopamine and the efficacy of the drug in signalling assays.

The human thalamus processes syntactic and semantic language violations

Numerous linguistic operations have been assigned to cortical brain areas, but the contributions of subcortical structures to human language processing are still being discussed. Using simultaneous EEG recordings directly from deep brain structures and the scalp, we show that the human thalamus systematically reacts to syntactic and semantic parameters of auditorily presented language in a temporally interleaved manner in coordination with cortical regions. In contrast, two key structures of the basal ganglia, the globus pallidus internus and the subthalamic nucleus, were not found to be engaged in these processes. We therefore propose that syntactic and semantic language analysis is primarily realized within cortico-thalamic networks, whereas a cohesive basal ganglia network is not involved in these essential operations of language analysis.

What is networked robotics?

Networked Robotics is an area that straddles robotics and network technology. A robot system controlled via the WWW exploits the Internet network and hence is one realisation of networked robotics. A set of field robots that exploit wireless networks to share and distribute tasks might also be considered an exemplar of networked robotics. But isn't this just an exemplar of distributed robotics? And if so, what does networked robotics bring to the 'robotics' table? These are questions and issues addressed in this paper. The paper will propose that networks are at once both enabling and constraining to robotics. They enlarge the scope of the robotics discipline yet introduce challenges that must be overcome if that potential is to be fully realized. In short, when the network becomes a design issue - normally when performance of the system is at a premium - networked robotics is at play.

Femtosecond evolution of spatially inhomogeneous carrier excitations: part 2: stochastic approach and GRID implementation

We present a stochastic approach for solving the quantum-kinetic equation introduced in Part I. A Monte Carlo method based on backward time evolution of the numerical trajectories is developed. The computational complexity and the stochastic error are investigated numerically. Variance reduction techniques are applied, which demonstrate a clear advantage with respect to the approaches based on symmetry transformation. Parallel implementation is realized on a GRID infrastructure.

Design and development of a dextrous manipulator

This paper describes a novel method of actuation for robotic hands. The solution employs a Bowden cable routed to each joint. The use of a Bowden cable is shown to be feasible for this purpose, ever, with the changing frictional forces associated with it. This method greatly simplifies the control of the hand by removing the coupling between joints, and provides for direct and accurate translation between the joints and the servo motors driving the cables. The design also allows for two degrees of freedom with the same centre of rotation to be realized in the largest knuckle of each finger; thus biological finger kinematics are more closely emulated.

An experimental approach to project risk identification and prioritization

One of the aims of a broad ethnographic study into how the apportionment of risk influences pricing levels of contactors was to ascertain the significant risks affecting contractors in Ghana, and their impact on prices. To do this, in the context of contractors, the difference between expected and realized return on a project is the key dependent variable examined using documentary analyses and semi-structured interviews. Most work in this has focused on identifying and prioritising risks using relative importance indices generated from the analysis of questionnaire survey responses. However, this approach may be argued to constitute perceptions rather than direct measures of the project risk. Here, instead, project risk is investigated by examining two measures of the same quantity; one ‘before’ and one ‘after’ construction of a project has taken place. Risks events are identified by ascertaining the independent variables causing deviations between expected and actual rates of return. Risk impact is then measured by ascertaining additions or reductions to expected costs due to the occurrence of risk events. So far, data from eight substantially complete building projects indicates that consultants’ inefficiency, payment delays, subcontractor-related problems and changes in macroeconomic factors are significant risks affecting contractors in Ghana.

Ultra narrow filters with good performance when tilted and cooled

Our latest research indicates that narrow bandpass filters of ~0.6% bandwidth (or any larger chosen width) and with good performance ar low temperature and in tilted and focused illumination can be realized by using multicavities and multimaterials.

A CAD-based computer vision system

A vision system for recognizing rigid and articulated three-dimensional objects in two-dimensional images is described. Geometrical models are extracted from a commercial computer aided design package. The models are then augmented with appearance and functional information which improves the system's hypothesis generation, hypothesis verification, and pose refinement. Significant advantages over existing CAD-based vision systems, which utilize only information available in the CAD system, are realized. Examples show the system recognizing, locating, and tracking a variety of objects in a robot work-cell and in natural scenes.

Persistence of volatility in futures markets

This article examines the characteristics of key measures of volatility for different types of futures contracts to provide a better foundation for modeling volatility behavior and derivative values. Particular attention is focused on analyzing how different measures of volatility affect volatility persistence relationships. Intraday realized measures of volatility are found to be more persistent than daily measures, the type of GARCH procedure used for conditional volatility analysis is critical, and realized volatility persistence is not coherent with conditional volatility persistence. Specifically, although there is a good fit between the realized and conditional volatilities, no coherence exists between their degrees of persistence, a counterintuitive finding that shows realized and conditional volatility measures are not a substitute for one another

The impact of corporate social performance on financial risk and utility: a longitudinal analysis

This study focuses on the wealth-protective effects of socially responsible firm behavior by examining the association between corporate social performance (CSP) and financial risk for an extensive panel data sample of S&P 500 companies between the years 1992 and 2009. In addition, the link between CSP and investor utility is investigated. The main findings are that corporate social responsibility is negatively but weakly related to systematic firm risk and that corporate social irresponsibility is positively and strongly related to financial risk. The fact that both conventional and downside risk measures lead to the same conclusions adds convergent validity to the analysis. However, the risk-return trade-off appears to be such that no clear utility gain or loss can be realized by investing in firms characterized by different levels of social and environmental performance. Overall volatility conditions of the financial markets are shown to play a moderating role in the nature and strength of the CSP-risk relationship.

HR-semantics roadmap: the semantic challenges and opportunities in the Human Resources domain

Purpose: This document identifies the challenges and opportunities in applying the ontology technology in the Human Resources domain. Target users: A reference for both the HR and the ontology communities. Also, to be used as a roadmap for the OOA itself, within the HR domain. Background: During the discussion panel at the OOA kick-off workshop, which was attended by more than 50 HR and ontology experts, the need for this roadmap was realized. It was obvious that the current understanding of the problem of semantics in HR is fragmented and only partial solutions exist. People from both the HR and the ontology communities speak different languages, have different understandings, and are not aware of existing solutions.

Optimal growth strategies when mortality and production rates are size-dependent

Pontryagin's maximum principle from optimal control theory is used to find the optimal allocation of energy between growth and reproduction when lifespan may be finite and the trade-off between growth and reproduction is linear. Analyses of the optimal allocation problem to date have generally yielded bang-bang solutions, i.e. determinate growth: life-histories in which growth is followed by reproduction, with no intermediate phase of simultaneous reproduction and growth. Here we show that an intermediate strategy (indeterminate growth) can be selected for if the rates of production and mortality either both increase or both decrease with increasing body size, this arises as a singular solution to the problem. Our conclusion is that indeterminate growth is optimal in more cases than was previously realized. The relevance of our results to natural situations is discussed.