Accelerated aging of thick glass second surface silvered reflectors under sandstorm conditions

Concentrated solar power systems are expected to be sited in desert locations where the direct normal irradiation is above 1800 kWh/m2.year. These systems include large solar collector assemblies, which account for a significant share of the investment cost. Solarreflectors are the main components of these solar collector assemblies and dust/sand storms may affect their reflectance properties, either by soiling or by surface abrasion. While soiling can be reverted by cleaning, surface abrasion is a non reversible degradation.The aim of this project was to study the accelerated aging of second surface silvered thickglass solar reflectors under simulated sandstorm conditions and develop a multi-parametric model which relates the specular reflectance loss to dust/sand storm parameters: wind velocity, dust concentration and time of exposure. This project focused on the degradation caused by surface abrasion.Sandstorm conditions were simulated in a prototype environmental test chamber. Material samples (6cm x 6cm) were exposed to Arizona coarse test dust. The dust stream impactedthese material samples at a perpendicular angle. Both wind velocity and dust concentrationwere maintained at a stable level for each accelerated aging test. The total exposure time in the test chamber was limited to 1 hour. Each accelerated aging test was interrupted every 4 minutes to measure the specular reflectance of the material sample after cleaning.The accelerated aging test campaign had to be aborted prematurely due to a contamination of the dust concentration sensor. A robust multi-parametric degradation model could thus not be derived. The experimental data showed that the specular reflectance loss decreasedeither linearly or exponentially with exposure time, so that a degradation rate could be defined as a single modeling parameter. A correlation should be derived to relate this degradation rate to control parameters such as wind velocity and dust/sand concentration.The sandstorm chamber design would have to be updated before performing further accelerated aging test campaigns. The design upgrade should improve both the reliability of the test equipment and the repeatability of accelerated aging tests. An outdoor exposure test campaign should be launched in deserts to learn more about the intensity, frequencyand duration of dust/sand storms. This campaign would also serve to correlate the results of outdoor exposure tests with accelerated exposure tests in order to develop a robust service lifetime prediction model for different types of solar reflector materials.

Estudos eletroquímicos de permeação de hidrogênio e determinação de concentrações críticas de hidrogênio em um aço de alta dureza

Estudou-se, através do método eletroquímico de permeação, a difusão de hidrogênio no ferro puro e no aço DIN 90MnV8. Observou-se nestes materiais, que o coeficiente aparente de difusão de hidrogênio diminui no decorrer dos transientes de permeação, tendo-se interpretado este comportamento como causado pela presença de armadilhas reversíveis. Deduziu-se, para transientes de permeação obtidos entre dois estados estacionários de difusão, que a variação da concentração de hidrogênio preso a armadilhas reversiveis é dada por: Delta Ca = Na. In [(1+alfa)1/2 dividido por (1+beta)1/2], alfa = K.Co/p beta=K.Cl/p sendo Na a densidade de armadilhas; k e p, os parâmetros de captura e de liberação de uma armadilha e Co e Cl, a concentrasão inicial e final de H. Mediu-se, no ferro recozido, um coeficiente médio de difusão de hidrogênio de 6,4.10-5 cm²/s. A deformação com 50% de trabalho a frio no ferro reduz este valor em aproximadamente uma ordem de grandeza. Verificou-se no aço DIN 90MnV8 que o coeficiente de difusão de hidrogênio aumenta com o aumento dn temperatura de revenimento após a têmpera, atingindo o valor máximo de 7,0.10-6 cm²/s no aço esferoidizado. A dependência térmica do coeficiente de difusão no aço DIN 90MnV8 esferoidizado pode ser expressa por: D = 1,95 (+0,49) exp (-30,43kJ/mol.R.T.) (cm²/s) e neste mesmo aço temperado e revenido com 55RC de dureza por : D=0,29 (+- 0,05 ) exp (-28,47kJ/mol.R.T.) ( cm²/s). Uma nova metodolagia fractomecânica foi introduzida, a qual permite a determinação da cnncentração crítica de hidrogênio necessária para provocar o avanço de uma trinca estacionária. Observou-se no aço DIN 9OMnV8, que a concentração crítica de hidrogênio diminui com o aumento da dureza do aço e é menor quando um valor maior de KI é aplicado. O modo de fratura apresentado Por este aço revelou ser independente da concentração de hidrogênio e do valor de KI, sendo função unicamente de sua dureza.

Nefrotoxicidade associada à anfotericina B em pacientes de baixo risco

Introdução: A anfotericina B é a droga de escolha para o tratamento de doenças fúngicas severas, estando associada, no entanto, a alta incidência de nefrotoxicidade. O uso de anfotericinas modificadas está associado a elevado custo. Em grupos de baixo risco o uso de sobrecarga hidrossalina pode ser suficiente para evitar perda severa de função renal. Métodos: Foram estudados prospectivamente pacientes internados em hospital universitário, com idade superior a 12 anos, e que estavam dentro das primeiras 24 horas de uso de anfotericina B. Foram excluídos pacientes em centros de terapia intensiva e que estivessem em uso de drogas vasoativas. Solução salina 0,9% (500 ml) foi infundida antes e após a anfotericina B. Foram coletados exames na inclusão e no término do tratamento. A dosagem de creatinina sérica foi repetida após 30 dias do término do tratamento. Resultados: Foram estudados 48 pacientes. A média de elevação da creatinina sérica foi de 0,3 (0,18-0,41) mg/dl., representando um decréscimo médio de 25 (12,8-36,9) ml/min na depuração de creatinina endógena (DCE). Insuficiência renal aguda (IRA), definida pela elevação maior do que 50% da creatinina basal, ocorreu em 15 pacientes (31,3%). Pacientes que utilizaram antibióticos e aqueles em status pós-quimioterapia ou submetidos a transplante de medula óssea foram os que apresentaram maior risco de desenvolverem IRA. A creatinina e a DCE após 30 dias do término do tratamento não diferiram de seus valores basais. Conclusão: Em pacientes de baixo risco, o uso de anfotericina B com adminstração profilática de solução fisiológica foi associado à alteração pequena e reversível da função renal. Devido ao alto custo, o uso de métodos mais dispendiosos nestes pacientes não parece justificado no momento. Ensaios clínicos randomizados são necessários nesta população.

Physiological and morphological responses to feeding in broad-nosed caiman (Caiman latirostris)

Broad nosed caiman are ectotherm sauropsids that naturally experience long fasting intervals. We have studied the postprandial responses by measuring oxygen consumption using respirometry, the size changes of the duodenum, the distal small intestine, and the liver, using repeated non-invasive ultrasonography, and by investigating structural changes on the level of tissues and cells by using light- and electron microscopy. The caimans showed the same rapid and reversible changes of organ size and identical histological features, down to the ultrastructure level, as previously described for other ectothermic sauropsids. We found a configuration change of the mucosa epithelium from pseudostratified during fasting to single layered during digestion, in association with hypertrophy of enterocytes by loading them with lipid droplets. Similar patterns were also found for the hepatocytes of the liver. By placing the results of our study in comparative relationship and by utilizing the phylogenetic bracket of crocodiles, birds and squamates, we suggest that the observed features are plesiomorphic characters of sauropsids. By extending the comparison to anurans, we suggest that morphological and physiological adjustments to feeding and fasting described here may have been a character of early tetrapods. In conclusion, we suggest that the ability to tolerate long fasting intervals and then swallow a single large meal as described for many sit-an-wait foraging sauropsids is a functional feature that was already present in ancestral tetrapods.

Ascorbate electro-oxidation by modified electrodes: Polypyrrole and polypyrrole/Ni(OH)(2) composite thin films

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos da aplicação de herbicidas sobre a eficiência fotoquímica em plantas de soja convencional e geneticamente modificada

Objetivou-se, neste trabalho, avaliar o efeito da aplicação de herbicidas em pós-emergência sobre a eficiência fotoquímica de duas cultivares de soja (M-SOY 7908 RR e M-SOY 8001). O delineamento experimental utilizado foi em blocos ao acaso, com quatro repetições. Os tratamentos constaram da aplicação de herbicidas isolados e em misturas: lactofen, glyphosate, lactofen + chlorimuron-ethyl, chlorimuron-ethyl + imazethapyr, chlorimuron-ethyl + bentazon, glyphosate + imazethapyr, lactofen + chlorimuron-ethyl + imazethapyr e lactofen + chlorimuron-ethyl + imazethapyr/haloxyfop-methyl. Além disso, foram mantidas duas testemunhas sem aplicação de herbicida. As avaliações foram realizadas aos 4; 11; 18; 25 e 32 dias após aplicação dos herbicidas (DAA) no primeiro ano, e aos 6, 14, 21, 28 e 35 DAA, no segundo. A cultivar M-SOY 8001 foi suscetível à aplicação dos herbicidas, principalmente às misturas contendo lactofen + chlorimuron-ethyl e lactofen + chlorimuron-ethyl + imazethapyr + haloxifop-methyl, os quais provocaram redução no rendimento quântico máximo do PSII (Fv/Fm). As duas cultivares apresentaram suscetibilidade aos herbicidas quando tratados com lactofen aplicado isolado e nas misturas lactofen + chlorimuron-ethyl, chlorimuron-ethyl + imazethapyr, lactofen + chlorimuron-ethyl + imazethapyr e lactofen + chlorimuron-ethyl + imazethapyr + haloxifop-methyl com redução nos teores de clorofila, estimados pelo Medidor Portátil de Clorofilas. Os danos foram reversíveis, desaparecendo gradativamente com a idade das plantas.

Langmuir and Langmuir-Blodgett films of poly[2-methoxy-5-(n-hexyloxy)-p-phenylenevinylene]

Langmuir films have been fabricated from poly[(2-methoxy-5-n-hexyloxy)-p-phenylenevinylene] (OC1OC6-PPV). The stability and the area per monomer for condensed films indicate the formation of true monolayers with a very small extent of aggregation, which is unusual for polymer films. This is attributed to the linearity of the alkyl side chain. The Y-type Langmuir-Blodgett (LB) films produced from Langmuir films of OC1OC6-PPV have distinctive features compared to those of cast films, probably due to the organization in the LB films whereas the molecules are randomly oriented in cast films. Infrared absorption spectra recorded for both transmission and reflection modes indicate that OC1OC6-PPV molecules are anchored to the substrate by the lateral groups. This is confirmed by the Raman spectrum, in which a distortion of the vinylene group was observed, and by surface enhanced fluorescence (SEF) on an LB monolayer deposited onto Ag nanoparticles. The more homogeneous nature of the LB films in comparison with the case of cast films was demonstrated by optical microscopy and fluorescence measurements where the emission spectra were essentially the same for different regions of an LB film but showed dispersion in cast films. The LB films also displayed reversible photoconductivity.

Electrochemical sensor for sulfite determination based on a nanostructured copper-salen film modified electrode

The electrochemical preparation described herein involved the electrocatalytic oxidation of sulfite on a platinum electrode modified with nanostructured copper salen (salen=N,N'-ethylenebis(salicylideneiminato)) polymer films. The complex was prepared and electropolymerized at a platinum electrode in a 0.1 mol L-1 solution of tetrabutylammonium perchlorate in acetonitrile by cyclic voltammetry between 0 and 1.4V vs. SCE. After cycling the modified electrode in a 0.50 mol L-1 KCI solution, the estimated surface concentration was found to be equal to 2.2 x 10(-9) Mol cm(-2). This is a typical behavior of an electrode surface immobilized with a redox couple that can usually be considered as a reversible single-electron reduction/oxidation of the copper(II)/copper(III) couple. The potential peaks of the modified electrode in the electrolyte solution (aqueous) containing the different anions increase with the decrease of the ionic radius, demonstrating that the counter-ions influence the voltammetric behavior of the sensor. The potential peak was found to be linearly dependent upon the ratio [ionic charge]/[ionic radius]. The oxidation of the sulfite anion was performed at the platinum electrode at +0.9V vs. SCE. However, a significant decrease in the overpotential (+0.45V) was obtained while using the sensor, which minimized the effect of oxidizable interferences. A plot of the anodic current vs. the sulfite concentration for chronoamperometry (potential fixed = +0.45V) at the sensor was linear in the 4.0 x 10(-6) to 6.9 x 10(-5) mol L-1 concentration range and the concentration limit was 1.2 x 10(-6) mol L-1. The reaction order with respect to sulfite was determined by the slope of the logarithm of the current vs. the logarithm of the sulfite concentration. (C) 2009 Elsevier Ltd. All rights reserved.

Study of the carbon dioxide chemical fixation-activation by guanidines

Fixation of CO2 is one of the most important priorities of the scientific community dedicated to reduce global warming. In this work, we propose new methods for the fixation of CO2 using the guanidine bases tetramethylguanidine (TMG) and 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]-pyrimidine (TBD). In order to understand the reactions occurring during the CO2 fixation and release processes, we employed several experimental methods, including solution and solid-state NMR, FTIR, and coupled TGA-FTIR. Quantum mechanical NMR calculations were also carried out. Based on the results obtained, we concluded that CO2 fixation with both TMG and TBD guanidines is a kinetically reversible process, and the corresponding fixation products have proved to be useful as transcarboxylating compounds. Afterward, CO2 thermal releasing from this fixation product with TBD was found to be an interesting process for CO2 capture and isolation purposes. (C) 2008 Elsevier Ltd. All rights reserved.

Electrochemical characterization of the paste carbon modified electrode with KSr2Ni0.75Nb4.25O15-delta solid in catalytic oxidation of the dipyrone

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical Vapor Deposited Thin Films of Lignins Extracted from Sugar Cane Bagasse: Morphology, Electrical Properties, and Sensing Applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

An electrochemical sensor for dipyrone determination based on nickel-salen film modified electrode

An amperometric dipyrone sensor based on a polymeric nickel-salen (salen = N,N'-ethylenebis(salicydeneiminato)) film coated platinum electrode was developed. The sensor was constructed by electropolymerization of nickel-salen complex at a platinum electrode in acetonitrile/tetrabuthylamonium perchlorate by cyclic voltammetry. After cycling the modified electrode in a 0.50 mol L-1 KCl solution, the estimated surface concentration was found to be equal to 1.29 x 10(-9) mol cm(-2). This is a typical behavior of an electrode surface immobilized with a redox couple that can usually be considered as a reversible single-electron reduction/oxidation of the nickel(II)/nickel(III) couple. A plot of the anodic current versus the dipyrone concentration for chronoamperometry (potential fixed = +0.50 V) at the sensor was linear in the 4.7 x 10(-6) to 1.1 x 10(-4) mol L-1 concentration range and the concentration limit was 1.2 x 10(-6) mol L-1. The proposed electrode is useful for the quality control and routine analysis of dipyrone in pharmaceutical formulations.

Structural and electrochemical properties of LiCoO2 prepared by combustion synthesis

LiCoO2 powders were prepared by combustion synthesis, using metallic nitrates as the oxidant and metal sources and urea as fuel. A small amount of the LiCoO2 phase was obtained directly from the combustion reaction, however, a heat treatment was necessary for the phase crystallization. The heat treatment was performed at the temperature range from 400 up to 700 degreesC for 12 h. The powders were characterized by X-ray diffraction (XRD), X ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and specific surface area values were obtained by BET isotherms. Composite electrodes were prepared using a mixture of LiCoO2, carbon black and poly(vinylidene fluoride) (PVDF) in the 85:10:5% w/w ratio. The electrochemical behavior of these composites was evaluated in ethylene carbonate/dimethylcarbonate solution, using lithium perchlorate as supporting electrolyte. Cyclic voltammograms showed one reversible redox process at 4.0/3.85 V and one irreversible redox process at 3.3 V for the LiCoO2 obtained after a post-heat treatment at 400 and 500 degreesC.Raman spectroscopy showed the possible presence of LiCoO2 with cubic structure for the material obtained at 400 and 500 degreesC. This result is in agreement with X-ray data with structural refinement for the LiCoO2 powders obtained at different temperatures using the Rietveld method. Data from this method showed the coexistence of cubic LiCoO2 (spinel) and rhombohedral (layered) structures when LiCoO2 was obtained at lower temperatures (400 and 500 degreesC). The single rhombohedral structure for LiCoO2 was obtained after post-heat treatment at 600 degreesC. The maximum energy capacity in the first discharge was 136 mA g(-1) for the composite electrode based on LiCoO2 obtained after heat treatment at 700 degreesC. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Altered expression of the costimulatory molecules CD80, CD86, CD152, PD-1 and ICOS on T-cells from paracoccidioidomycosis patients: Lack of correlation with T-cell hyporesponsiveness

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Acute 2,4-dichlorophenoxyacetic acid intoxication in broiler chicks

The acute toxicity of 2,4-dichlorophenoxyacetic acid (2,4-D), a herbicide, was studied in chicks dosed with 100, 300, 500, or 600 mg 2,4-D/kg BW, by the oral route. Clinical, laboratory, and histopathological methods were used as indicators of toxicity. After acute exposure, the herbicide decreased motor activity and induced muscular weakness and motor incoordination; decreased weight gain; increased serum creatine kinase (CK) and alkaline phosphatase (AP) activities and serum uric acid (UA), creatinine (CR), and total proteins (TP) levels; and did not change serum aspartate aminotransferase (AST) or alanine aminotransferase (ALT) activities. These changes were time-and dose-dependent and reversible. The LD50 (lethal dose 50%) calculated for oral 2,4-D in chicks was 420 mg/kg BW (385 to 483). Chromatographic analysis of the serum of the intoxicated chicks showed the presence of the herbicide; the amount found was dose-and time-dependent, increasing from 2 to 8 h after exposure and decreasing afterwards. Histopathological post-mortem studies conducted on intoxicated chicks showed hepatic (vacuolar degeneration of the hepatocytes), renal (tubular nephrosis), and intestinal (hemorragic) lesions. Taken together, the observed alterations mainly reflected kidney and muscle tissue damage, although hepatic toxicity may also have occurred after acute 2,4-D intoxication.