Key to the paper and social wasps of Central Europe (Hymenoptera: Vespidae)

A determination key to the Central European paper wasps (Polistinae – Polistes Latreille, 1802 – eight species) and social wasps (Vespinae – 11 species: Vespa Linnaeus, 1758 – one species, Vespula Thomson, 1869 – four species, Dolichovespula Rohwer, 1916 – six species) is given. Distribution and biotope requirements of all species in the Czech Republic and Slovakia are briefly mentioned. All social wasps occur more or less regularly in both countries. Four paper wasps are relatively common but four other species (Polistes atrimandibularis Zimmermann, 1930, P. sulcifer Zimmermann, 1930, P. associus Kohl, 1898, and P. gallicus (Linnaeus, 1767)) are very rare with the Czech Republic and/or Slovakia at the northern edge of their range.

Use of thermography and fibre optics microscopy for the evaluation of railway structures in the Athens Metro in Greece (Invited Paper)

Rolling Contact Fatigue (RCF) is one of the main issues that concern, at least initially, the head of the railway; progressively they can be of very high importance as they can propagate inside the material with the risk of damaging the railway. In this work, two different non-destructive techniques, infrared thermography (IRT) and fibre optics microscopy (FOM), were used in the inspection of railways for the tracing of defects and deterioration signs. In the first instance, two different approaches (dynamic and pulsed thermography) were used, whilst in the case of FOM, microscopic characterisation of the railway heads and classification of the deterioration -- damage on the railways according to the UIC (International Union of Railways) code, took place. Results from both techniques are presented and discussed.

Meta-morphs: – being a mediator of the ‘thin’ place and ‘thin’ experience in the HE classroom. A paper on the experience of creating transformations in HE teaching and learning

The research which underpins this paper began as a doctoral project exploring archaic beliefs concerning Otherworlds and Thin Places in two particular landscapes - the West Coast of Wales and the West Coast of Ireland. A Thin Place is an ancient Celtic Christian term used to describe a marginal, liminal realm, beyond everyday human experience and perception, where mortals could pass into the Otherworld more readily, or make contact with those in the Otherworld more willingly. To encounter a Thin Place in ancient folklore was significant because it engendered a state of alertness, an awakening to what the theologian John O’ Donohue (2004: 49) called “the primal affection.” These complex notions and terms will be further explored in this paper in relation to Education. Thin Teaching is a pedagogical approach which offers students the space to ruminate on the possibility that their existence can be more and can mean more than the categories they believed they belonged to or felt they should inhabit. Central to the argument then, is that certain places and their inhabitants can become revitalised by sensitively considered teaching methodologies. This raises interesting questions about the role spirituality plays in teaching practice as a tool for healing in the twenty first century.

PLEASE CITE THIS: an exploratory paper on citations, impacts and the social accounting literature

This paper seeks to use the increasingly influential citation and impact data to explore the contours of the social and environmental accounting (SEA) literature. Our ambitions are fourfold. First, we offer a more nuanced understanding of the journals in which we tend to publish SEA research. Second, we tease out what might plausibly be thought to be one indication of the ‘most influential’ SEA papers. Third, we offer a substantive cautionary note about the dangers of the careless use of citations as singular measures of ‘quality’ or ‘importance’, etc. Finally, we place the growing SEA literature in a wider context which both flatters and challenges the community that SEAJ seeks to serve.

Meta-analysis to integrate effect sizes within a paper: Possible misuse and Type-1 error inflation

In recent years an increasing number of papers have employed meta-analysis to integrate effect sizes of researchers’ own series of studies within a single paper (“internal meta-analysis”). Although this approach has the obvious advantage of obtaining narrower confidence intervals, we show that it could inadvertently inflate false-positive rates if researchers are motivated to use internal meta-analysis in order to obtain a significant overall effect. Specifically, if one decides whether to stop or continue a further replication experiment depending on the significance of the results in an internal meta-analysis, false-positive rates would increase beyond the nominal level. We conducted a set of Monte-Carlo simulations to demonstrate our argument, and provided a literature review to gauge awareness and prevalence of this issue. Furthermore, we made several recommendations when using internal meta-analysis to make a judgment on statistical significance.

Surface properties of eucalyptus pulp fibres as reinforcement of cement-based composites

The objective of the present work is to evaluate the effects of the surface properties of unrefined eucalyptus pulp fibres concerning their performance in cement-based composites. The influence of the fibre surface on the microstructure of fibre-cement composites was evaluated after accelerated ageing cycles, which simulate natural weathering. The surface of unbleached pulp is a thin layer that is rich in cellulose, lignin, hemicelluloses, and extractives. Such a layer acts as a physical and chemical barrier to the penetration of low molecular components of cement. The unbleached fibres are less hydrophilic than the bleached ones. Bleaching removes the amorphous lignin and extractives from the surface and renders it more permeable to liquids. Atomic force microscopy (AFM) helps in understanding the fibre-cement interface. Bleaching improved the fibre- cement interfacial bonding, whereas fibres in the unbleached pulp were less susceptible to the re-precipitation of cement hydration products into the fibre cavities (lumens). Therefore, unbleached fibres can improve the long-term performance of the fibre-cement composite owing to their delayed mineralization.

Accelerated testing of mold growth on traditional and recycled book paper

The growth of molds on paper containing cellulose is a frequent occurrence when the level of relative air humidity is high or when books become wet due to water leaks in libraries. The aim of this study is to differentiate the bioreceptivity of different types of book paper for different fungi. Laboratory tests were performed with strains of Aspergillus niger, Cladosporium sp., Chaetomium globosum and Trichoderma harzianum isolated from books. Four paper types were evaluated: couche Men (offset), recycled and a reference paper containing only cellulose. The tests were carried out in chambers with relative air humidity of 95% and 100%. Mold growth was greatest in the tests at 100% relative humidity. Results of stereoscopic microscopy observation showed that Cladosporium sp. grew in 74% of these samples, A. niger in 75%, T. harzianum in 72% and C. globosum in 60%. In the chambers with 95% air humidity Cladosporium sp. grew in only 9% of the samples, A. niger in 1%, T harzianum in 3% and C globosum did not grow in any sample. The most bioreceptive paper was couche and the least receptive was recycled paper. The composition of the recycled paper, however, varies depending on the types of waste materials used to make it. (C) 2011 Elsevier Ltd. All rights reserved.

Evaluation of dental pulp repair using low level laser therapy (688 nm and 785 nm) morphologic study in capuchin monkeys

The aim of this study was to evaluate the hypothesis that low-level laser therapy (LLLT) 688 nm and 785 nm accelerate dentin barrier formation and repair process after traumatic pulp exposure. The sample consisted of 45 premolars of capuchin monkeys (Cebus apella) with pulp exposure Class V cavities. All premolars were treated with calcium hydroxide (Ca(OH)(2)), divided in groups of 15 teeth each, and analyzed on 7(th), 25(th), and 60(th) day. Group GI - only Ca(OH)(2), GIF- laser 688 nm, and GIII - laser 785 nm. Laser beam was used in single and punctual dose with the parameters: continuous, 688 nm and 785 nm wavelength, tip`s area of 0.00785 cm(2), power 50 mW, application time 20 s, dose 255 J/cm(2), energy 2 J. Teeth were capped with Ca(OH)(2), Ca(OH)(2) cement and restored with amalgam. All groups presented pulp repair. On 25(th) day the thickness of the formed dentin barrier was different between the groups GI and GII (p < 0.05) and between groups GI and GIII (p < 0.01). On 60(th) day there was difference between GI and GIII (p < 0.01). It may be concluded that, LLLT 688 nm and 785 nm accelerated dentin barrier formation and consequently pulp repair process, with best results using infrared laser 785 nm. (c) 2009 by Astro Ltd. Published exclusively by WLLEY-VCH Verlag GmbH & Co. KGaA