Swath sonar bathymetry during POLARSTERN cruise ARK-XXII/1c (PS70) with links to multibeam raw data files

Multibeam data were measured as part of the project HERMES during R/V Polarstern cruise ARK-XXII/1 (2007-05-29 to 2007-07-25) along transits and survey profiles and partly during stationary work. Data were achieved mainly in the coastal areas of northern Norway, at the Hakon Mosby Mud Volcano at the continental margin approx. 200 nm off the norwegian coast and the AWI-Hausgarten area approx. 150 nm west of Svalbard. A number of surveys were carried out in the coastal areas of northern Norway (Sula Reef, Roest Reef, Traena area, Floholmen area, Sotbakken area) and around the area of the Hakon Mosby Mud Volcano. The multibeam sonar system Atlas Hydrosweep DS-2 (Atlas Hydrographic, http://www.atlashydro.com) was operated using 59 beams and 90° aperture angle. The refraction correction was achieved using CTD profiles measured during this cruise or, during transits, utilizing the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions (only in the AWI-Hausgarten area). This dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Seismic Data from MSM21/4 to Knipovich Ridge on the western Svalbard margin

The seismic data were acquired north of the Knipovich Ridge on the western Svalbard margin during cruise MSM21/4. They were recorded using a Geometrics GeoEel streamer of either 120 channels (profiles p100-p208) or 88 channels (profiles p300-p805) with a group spacing of 1.56 m and a sampling rate of 2 kHz. A GI-Gun (2×1.7 l) with a main frequency of ~150 Hz was used as a source and operated at a shot interval of 6-8 s. Processing of profiles p100-p208 and p600-p805: Positions for each channel were calculated by backtracking along the profiles from the GI-Gun GPS positions. The shot gathers were analyzed for abnormal amplitudes below the seafloor reflection by comparing neighboring traces in different frequency bands within sliding time windows. To suppress surface-generated water noise, a tau-p filter was applied in the shot gather domain. Common mid-point (CMP) profiles were then generated through crooked-line binning with a CMP spacing of 1.5625 m. A zero-phase band-pass filter with corner frequencies of 60 Hz and 360 Hz was applied to the data. Based on regional velocity information from MCS data [Sarkar, 2012], an interpolated and extrapolated 3D interval velocity model was created below the digitized seafloor reflection of the high-resolution streamer data. This velocity model was used to apply a CMP stack and an amplitude-preserving Kirchhoff post-stack time migration. Processing of profiles p400-p500: Data were sampled at 0.5 ms and sorted into common midpoint (CMP) domain with a bin spacing of 5 m. Normal move out correction was carried out with a velocity of 1500 m s-1 and an Ormsby bandpass filter with corner frequencies at 40, 80, 600 and 1000 Hz was applied. The data were time migrated using the water velocity.