Solving Schrödinger equation for two dimensional potentials using supersymmetry

The formalism of supersymmetric Quantum Mechanics can be extended to arbitrary dimensions. We introduce this formalism and explore its utility to solve the Schrödinger equation for a bidimensinal potential. This potential can be applied in several systems in physical and chemistry context , for instance, it can be used to study benzene molecule.

Bulvaani osakeyhtiön osakkaana -erityisesti verotuksen kohdistamisen, peitellyn osingon ja veron kiertämisen näkökulmasta tarkasteltuna

Tutkimuksen tarkoituksena oli selvittää verotuksen kohdistumista tilanteissa, joissa osakeyhtiön osakkaana on bulvaani. Käyttämällä bulvaanisuhdetta ja osakeyhtiön muotoa hyväksi, pyritään usein saavuttamaan sellaisia veroetuja, joita bulvaanin taustalla pysyttelevä päämies ei voisi ilman tällaista muodollista järjestelyä hyväkseen saada. Osakeyhtiön ja osakkaan erillisellä verovelvollisuudella pyritään välttämään veroseuraamusten kohdistaminen. Verotuksen kohdistamista tutkittiin lähinnä verotusmenettelylaissa säänneltyjen, peiteltyä osinkoa ja veron kiertämistä koskevien lainkohtien soveltamisedellytyksiä tarkastelemalla. Lainkohtien avoimen sanamuodon vuoksi peitellyn osingon kohdistamisongelman ratkaiseminen ja verovelvollisen toimenpiteiden tulkitseminen veron kierroksi, ovat jääneet oikeuskäytännössä syntyneiden linjausten varaan. Lisäksi tutkittiin valeoikeustoimen ja keinotekoisten järjestelyjen vaikutusta tuloverotuksen kohdistamisessa. Tutkimus on tehty voimassa olevaa lainsäädäntöä ja lakien valmisteluaineistoa tarkastelemalla sekä oikeustapausten että oikeuskirjallisuuden yhteistutkimuksena.

Towards increased productivity and quality in software development using agile, lean and collaborative approaches

Dagens programvaruindustri står inför alltmer komplicerade utmaningar i en värld där programvara är nästan allstädes närvarande i våra dagliga liv. Konsumenten vill ha produkter som är pålitliga, innovativa och rika i funktionalitet, men samtidigt också förmånliga. Utmaningen för oss inom IT-industrin är att skapa mer komplexa, innovativa lösningar till en lägre kostnad. Detta är en av orsakerna till att processförbättring som forskningsområde inte har minskat i betydelse. IT-proffs ställer sig frågan: “Hur håller vi våra löften till våra kunder, samtidigt som vi minimerar vår risk och ökar vår kvalitet och produktivitet?” Inom processförbättringsområdet finns det olika tillvägagångssätt. Traditionella processförbättringsmetoder för programvara som CMMI och SPICE fokuserar på kvalitets- och riskaspekten hos förbättringsprocessen. Mer lättviktiga metoder som t.ex. lättrörliga metoder (agile methods) och Lean-metoder fokuserar på att hålla löften och förbättra produktiviteten genom att minimera slöseri inom utvecklingsprocessen. Forskningen som presenteras i denna avhandling utfördes med ett specifikt mål framför ögonen: att förbättra kostnadseffektiviteten i arbetsmetoderna utan att kompromissa med kvaliteten. Den utmaningen attackerades från tre olika vinklar. För det första förbättras arbetsmetoderna genom att man introducerar lättrörliga metoder. För det andra bibehålls kvaliteten genom att man använder mätmetoder på produktnivå. För det tredje förbättras kunskapsspridningen inom stora företag genom metoder som sätter samarbete i centrum. Rörelsen bakom lättrörliga arbetsmetoder växte fram under 90-talet som en reaktion på de orealistiska krav som den tidigare förhärskande vattenfallsmetoden ställde på IT-branschen. Programutveckling är en kreativ process och skiljer sig från annan industri i det att den största delen av det dagliga arbetet går ut på att skapa något nytt som inte har funnits tidigare. Varje programutvecklare måste vara expert på sitt område och använder en stor del av sin arbetsdag till att skapa lösningar på problem som hon aldrig tidigare har löst. Trots att detta har varit ett välkänt faktum redan i många decennier, styrs ändå många programvaruprojekt som om de vore produktionslinjer i fabriker. Ett av målen för rörelsen bakom lättrörliga metoder är att lyfta fram just denna diskrepans mellan programutvecklingens innersta natur och sättet på vilket programvaruprojekt styrs. Lättrörliga arbetsmetoder har visat sig fungera väl i de sammanhang de skapades för, dvs. små, samlokaliserade team som jobbar i nära samarbete med en engagerad kund. I andra sammanhang, och speciellt i stora, geografiskt utspridda företag, är det mera utmanande att införa lättrörliga metoder. Vi har nalkats utmaningen genom att införa lättrörliga metoder med hjälp av pilotprojekt. Detta har två klara fördelar. För det första kan man inkrementellt samla kunskap om metoderna och deras samverkan med sammanhanget i fråga. På så sätt kan man lättare utveckla och anpassa metoderna till de specifika krav som sammanhanget ställer. För det andra kan man lättare överbrygga motstånd mot förändring genom att introducera kulturella förändringar varsamt och genom att målgruppen får direkt förstahandskontakt med de nya metoderna. Relevanta mätmetoder för produkter kan hjälpa programvaruutvecklingsteam att förbättra sina arbetsmetoder. När det gäller team som jobbar med lättrörliga och Lean-metoder kan en bra uppsättning mätmetoder vara avgörande för beslutsfattandet när man prioriterar listan över uppgifter som ska göras. Vårt fokus har legat på att stöda lättrörliga och Lean-team med interna produktmätmetoder för beslutsstöd gällande så kallad omfaktorering, dvs. kontinuerlig kvalitetsförbättring av programmets kod och design. Det kan vara svårt att ta ett beslut att omfaktorera, speciellt för lättrörliga och Lean-team, eftersom de förväntas kunna rättfärdiga sina prioriteter i termer av affärsvärde. Vi föreslår ett sätt att mäta designkvaliteten hos system som har utvecklats med hjälp av det så kallade modelldrivna paradigmet. Vi konstruerar även ett sätt att integrera denna mätmetod i lättrörliga och Lean-arbetsmetoder. En viktig del av alla processförbättringsinitiativ är att sprida kunskap om den nya programvaruprocessen. Detta gäller oavsett hurdan process man försöker introducera – vare sig processen är plandriven eller lättrörlig. Vi föreslår att metoder som baserar sig på samarbete när processen skapas och vidareutvecklas är ett bra sätt att stöda kunskapsspridning på. Vi ger en översikt över författarverktyg för processer på marknaden med det förslaget i åtanke.

Problems and potentialities of e-Learning for regular undergraduate courses in emergency medicine

BACKGROUND: E-learning techniques are spreading at great speed in medicine, raising concerns about the impact of adopting them. Websites especially designed to host courses are becoming more common. There is a lack of evidence that these systems could enhance student knowledge acquisition. GOAL: To evaluate the impact of using dedicated-website tools over cognition of medical students exposed to a first-aid course. METHODS: Prospective study of 184 medical students exposed to a twenty-hour first-aid course. We generated a dedicated-website with several sections (lectures, additional reading material, video and multiple choice exercises). We constructed variables expressing the student's access to each section. The evaluation was composed of fifty multiple-choice tests, based on clinical problems. We used multiple linear regression to adjust for potential confounders. RESULTS: There was no association of website intensity of exposure and the outcome - beta-coeficient 0.27 (95%CI - 0.454 - 1.004). These findings were not altered after adjustment for potential confounders - 0.165 (95%CI -0.628 - 0.960). CONCLUSION: A dedicated website with passive and active capabilities for aiding in person learning had not shown association with a better outcome.

Projektien jälkilaskenta kunnossapitoyrityksessä

Tutkimuksen päätavoitteena on määrittää kohdeyritykseen soveltuvat menetelmät, joiden avulla voidaan suorittaa alueurakoiden jälkilaskenta. Jälkilaskelmien tavoite on selvittää alueurakoiden tarjousvaiheen kustannusarvioiden ja toteutuneiden kustannusten merkittävimmät erot nykyisin saatavissa olevan informaation avulla. Työ rajataan käsittelemään viittä kohdeyrityksen alueurakkaa. Tutkimuksen toinen tavoite on määrittää kohdeyrityksen kustannusseurannan keskeisimmät ongelmat jälkilaskennan näkökulmasta ja esittää kehitystoimenpiteet näiden ongelmien ratkaisemiseksi. Tutkimuksen tutkimusote on konstruktiivinen, joka sisältää myös toimintaanalyyttisiä piirteitä. Tutkimus jakautuu teoreettiseen kirjallisuusselvitykseen ja empiiriseen ongelmanratkaisuosioon. Tarjouslaskennan ja toteutuneiden kustannusten vertailu edellyttää alueurakoiden sisältömuutosten ja hinnantarkistusten huomioimista sekä apukustannuspaikkojen kustannusten kohdistamista varsinaisille kunnossapitotehtäville. Suoritetun jälkilaskennan tuloksena havaitaan merkittäviä eroja tarjouslaskennan ja toteutuneiden kustannusten välillä kaikissa urakoissa. Jälkilaskennan suorittamisen näkökulmasta kohdeyrityksen kustannusseurannan heikkouksia ovat tiedon hajanainen sijainti eri järjestelmissä ja muutamat kustannusten rekisteröinnin yksityiskohdat. Ratkaisuksi ehdotetaan kaikkien jälkilaskennan kannalta oleellisten tietojen keskittämistä yrityksen käyttämään talousseurantajärjestelmään. Kustannusten rekisteröinnin kehittämiseen ehdotetaan tiettyjen kustannuspaikkojen jakamista pienempiin osiin ja toisten sisältämien tehtävien tarkempaa määrittelyä.

Solving the puzzle of mobile learning adoption

The dissertation seeks to explore how to improve users‘ adoption of mobile learning in current education systems. Considering the difference between basic and tertiary education in China, the research consists of two separate but interrelated parts, which focus on the use of mobile learning in basic and tertiary education contexts, respectively. In the dissertation, two adoption frameworks are developed based on previous studies. The frameworks are then evaluated using different technologies. Concerning mobile learning use in basic education settings, case study methodology is utilized. A leading provider of mobile learning services and products in China, Noah Ltd., is investigated. Multiple sources of evidence are collected to test the framework. Regarding mobile learning adoption in tertiary education contexts, survey research methodology is utilized. Based on 209 useful responses, the framework is evaluated using structural equation modelling technology. Four proposed determinants of intention to use are evaluated, which are perceived ease of use, perceived near-term usefulness, perceived ong-term usefulness and personal innovativeness. The dissertation provides a number of new insights for both researchers and practitioners. In particular, the dissertation specifies a practical solution to deal with the disruptive effects of mobile learning in basic education, which keeps the use of mobile learning away from the schools across such as European countries. A list of new and innovative mobile learning technologies is systematically introduced as well. Further, the research identifies several key factors driving mobile learning adoption in tertiary education settings. In theory, the dissertation suggests that since the technology acceptance model is initiated in work-oriented innovations by testing employees, it is not necessarily the best model for studying educational innovations. The results also suggest that perceived longterm usefulness for educational systems should be as important as perceived usefulness for utilitarian systems, and perceived enjoyment for hedonic systems. A classification based on the nature of systems purpose (utilitarian, hedonic or educational) would contribute to a better understanding of the essence of IT innovation adoption.

Methods and Models for Accelerating Dynamic Simulation of Fluid Power Circuits

The objective of this dissertation is to improve the dynamic simulation of fluid power circuits. A fluid power circuit is a typical way to implement power transmission in mobile working machines, e.g. cranes, excavators etc. Dynamic simulation is an essential tool in developing controllability and energy-efficient solutions for mobile machines. Efficient dynamic simulation is the basic requirement for the real-time simulation. In the real-time simulation of fluid power circuits there exist numerical problems due to the software and methods used for modelling and integration. A simulation model of a fluid power circuit is typically created using differential and algebraic equations. Efficient numerical methods are required since differential equations must be solved in real time. Unfortunately, simulation software packages offer only a limited selection of numerical solvers. Numerical problems cause noise to the results, which in many cases leads the simulation run to fail. Mathematically the fluid power circuit models are stiff systems of ordinary differential equations. Numerical solution of the stiff systems can be improved by two alternative approaches. The first is to develop numerical solvers suitable for solving stiff systems. The second is to decrease the model stiffness itself by introducing models and algorithms that either decrease the highest eigenvalues or neglect them by introducing steady-state solutions of the stiff parts of the models. The thesis proposes novel methods using the latter approach. The study aims to develop practical methods usable in dynamic simulation of fluid power circuits using explicit fixed-step integration algorithms. In this thesis, twomechanisms whichmake the systemstiff are studied. These are the pressure drop approaching zero in the turbulent orifice model and the volume approaching zero in the equation of pressure build-up. These are the critical areas to which alternative methods for modelling and numerical simulation are proposed. Generally, in hydraulic power transmission systems the orifice flow is clearly in the turbulent area. The flow becomes laminar as the pressure drop over the orifice approaches zero only in rare situations. These are e.g. when a valve is closed, or an actuator is driven against an end stopper, or external force makes actuator to switch its direction during operation. This means that in terms of accuracy, the description of laminar flow is not necessary. But, unfortunately, when a purely turbulent description of the orifice is used, numerical problems occur when the pressure drop comes close to zero since the first derivative of flow with respect to the pressure drop approaches infinity when the pressure drop approaches zero. Furthermore, the second derivative becomes discontinuous, which causes numerical noise and an infinitely small integration step when a variable step integrator is used. A numerically efficient model for the orifice flow is proposed using a cubic spline function to describe the flow in the laminar and transition areas. Parameters for the cubic spline function are selected such that its first derivative is equal to the first derivative of the pure turbulent orifice flow model in the boundary condition. In the dynamic simulation of fluid power circuits, a tradeoff exists between accuracy and calculation speed. This investigation is made for the two-regime flow orifice model. Especially inside of many types of valves, as well as between them, there exist very small volumes. The integration of pressures in small fluid volumes causes numerical problems in fluid power circuit simulation. Particularly in realtime simulation, these numerical problems are a great weakness. The system stiffness approaches infinity as the fluid volume approaches zero. If fixed step explicit algorithms for solving ordinary differential equations (ODE) are used, the system stability would easily be lost when integrating pressures in small volumes. To solve the problem caused by small fluid volumes, a pseudo-dynamic solver is proposed. Instead of integration of the pressure in a small volume, the pressure is solved as a steady-state pressure created in a separate cascade loop by numerical integration. The hydraulic capacitance V/Be of the parts of the circuit whose pressures are solved by the pseudo-dynamic method should be orders of magnitude smaller than that of those partswhose pressures are integrated. The key advantage of this novel method is that the numerical problems caused by the small volumes are completely avoided. Also, the method is freely applicable regardless of the integration routine applied. The superiority of both above-mentioned methods is that they are suited for use together with the semi-empirical modelling method which necessarily does not require any geometrical data of the valves and actuators to be modelled. In this modelling method, most of the needed component information can be taken from the manufacturer’s nominal graphs. This thesis introduces the methods and shows several numerical examples to demonstrate how the proposed methods improve the dynamic simulation of various hydraulic circuits.

Solving Leontief Input-Output Model with Trapezoidal Fuzzy Numbers and Gauss-Seidel Algorithm

In this work a fuzzy linear system is used to solve Leontief input-output model with fuzzy entries. For solving this model, we assume that the consumption matrix from di erent sectors of the economy and demand are known. These assumptions heavily depend on the information obtained from the industries. Hence uncertainties are involved in this information. The aim of this work is to model these uncertainties and to address them by fuzzy entries such as fuzzy numbers and LR-type fuzzy numbers (triangular and trapezoidal). Fuzzy linear system has been developed using fuzzy data and it is solved using Gauss-Seidel algorithm. Numerical examples show the e ciency of this algorithm. The famous example from Prof. Leontief, where he solved the production levels for U.S. economy in 1958, is also further analyzed.

Integrating eco-innovation principles into regional strategy and policy: case of Päijät-Häme region, Finland

This study focuses on the integration of eco-innovation principles into strategy and policy at the regional level. The importance of regions as a level for integrating eco-innovative programs and activities served as the point of interest for this study. Eco-innovative activities and technologies are seen as means to meet sustainable development objective of improving regions’ quality of life. This study is conducted to get an in-depth understanding and learning about eco-innovation at regional level, and to know the basic concepts that are important in integrating eco-innovation principles into regional policy. Other specific objectives of this study are to know how eco-innovation are developed and practiced in the regions of the EU, and to analyze the main characteristic features of an eco-innovation model that is specifically developed at Päijät-Häme Region in Finland. Paijät-Häme Region is noted for its successful eco-innovation strategies and programs, hence, taken as casework in this study. Both primary (interviews) and secondary data (publicly available documents) are utilized in this study. The study shows that eco-innovation plays an important role in regional strategy as reviewed based on the experience of other regions in the EU. This is because of its localized nature which makes it easier to facilitate in a regional setting. Since regional authorities and policy-makers are normally focused on solving its localized environmental problems, eco-innovation principles can easily be integrated into regional strategy. The case study highlights Päijät-Häme Region’s eco-innovation strategies and projects which are characterized by strong connection of knowledge-producing institutions. Policy instruments supporting eco-innovation (e.g. environmental technologies) are very much focused on clean technologies, hence, justifying the formation of cleantech clusters and business parks in Päijät-Häme Region. A newly conceptualized SAMPO model of eco-innovation has been developed in Päijät-Häme Region to better capture the region’s characteristics and to eventually replace the current model employed by the Päijät-Häme Regional Authority. The SAMPO model is still under construction, however, review of its principles points to some of its three important spearheads – practice-based innovation, design (eco-design) and clean technology or environmental technology (environment).

Algorithmic Solutions for Combinatorial Problems in Resource Management of Manufacturing Environments

This thesis studies the use of heuristic algorithms in a number of combinatorial problems that occur in various resource constrained environments. Such problems occur, for example, in manufacturing, where a restricted number of resources (tools, machines, feeder slots) are needed to perform some operations. Many of these problems turn out to be computationally intractable, and heuristic algorithms are used to provide efficient, yet sub-optimal solutions. The main goal of the present study is to build upon existing methods to create new heuristics that provide improved solutions for some of these problems. All of these problems occur in practice, and one of the motivations of our study was the request for improvements from industrial sources. We approach three different resource constrained problems. The first is the tool switching and loading problem, and occurs especially in the assembly of printed circuit boards. This problem has to be solved when an efficient, yet small primary storage is used to access resources (tools) from a less efficient (but unlimited) secondary storage area. We study various forms of the problem and provide improved heuristics for its solution. Second, the nozzle assignment problem is concerned with selecting a suitable set of vacuum nozzles for the arms of a robotic assembly machine. It turns out that this is a specialized formulation of the MINMAX resource allocation formulation of the apportionment problem and it can be solved efficiently and optimally. We construct an exact algorithm specialized for the nozzle selection and provide a proof of its optimality. Third, the problem of feeder assignment and component tape construction occurs when electronic components are inserted and certain component types cause tape movement delays that can significantly impact the efficiency of printed circuit board assembly. Here, careful selection of component slots in the feeder improves the tape movement speed. We provide a formal proof that this problem is of the same complexity as the turnpike problem (a well studied geometric optimization problem), and provide a heuristic algorithm for this problem.

Teollisuusprosessien signaalien automaattinen analysointi

Diplomityössä kehitettiin menetelmiä teollisuusprosessien signaalien automaattiseen havainnointiin ja luotiin työkalu tulosten esittämiseen. Työn tarkoituksena on nopeuttaa ja helpottaa prosessin ongelmien ratkaisua luokittelemalla signaalit matemaattisten menetelmien avulla. Koska prosessin mittaussignaalit ovat pääasiassa stokastisia, eli niitä ei voida etukäteen ennustaa, käsitellään signaaleita tilastomatemaattisin keinoin. Työstä rajattiin mittaushistorian käyttö, joten värähtelyiden tunnistus toteutettiin taajuusanalyysin avulla. Korrelaation avulla löydetään samankaltaiset signaalit. Testeissä todettiin, että työssä kehitetyt havainnoinnit toimivat eri näytteenottotaajuuksilla ja työkalun suoritusnopeus todettiin hyväksi. Lopuksi esiteltiin todellinen teollisuusprosessin ongelma ja siihen mahdollisia ratkaisuja.

TRIZ – Systemaattinen teknisten ongelmien ratkaisumenetelmä

Tämän kandidaatintyön tavoitteena on kartoittaa TRIZ-menetelmää teknisen ongelmanratkaisuprosessin työkaluna, sekä antaa lukijalle yleiskatsaus menetelmän työkaluista ja hyödyistä esimerkkien avulla. Työ vastaa kysymyksiin: Soveltuuko TRIZ tekniseen ongelmanratkaisuun? Miten TRIZ:in koulutus tulisi toteuttaa? Työn teoria pohjautuu alan julkaisuihin sekä yritysten raportoimiin tuloksiin. Havainnollistavina esimerkkeinä on käytetty kirjallisuudesta löytyneitä, sekä itse havaittuja ongelmia ratkaisuineen. Työ on toteutettu kirjallisuustyönä. Työn tuloksena toteamme, että TRIZ soveltuu hyvin tekniseen ongelmanratkaisuun tarjoten perinteistä ongelmanratkaisua tehokkaammat menetelmät. TRIZ korostaa ongelmia aiheuttavien ristiriitojen etsimistä, analysointia ja täydellistä poistamista. Menetelmällä voidaan lisätä ja nopeuttaa innovaatioiden syntyä, koska ristiriidan ratkaisussa voidaan hyödyntää jo muissa patenteissa käytettyjä ratkaisumalleja.