Caracterização físico-química e avaliação toxicológica preliminar do copolímero sulfato de condroitina-co-N-isopropilacrilamida para uso farmacêutico

A Indústria Farmacêutica utiliza polímeros em forma de nanopartículas em formulações de liberação controlada e vetorizada por possuírem baixo custo em relação a demais métodos de preparações de formas farmacêuticas, aparentemente não serem reconhecidos pelo sistema de defesa do organismo, proporcionar melhora da eficácia, diminuição da toxicidade e da dose de fármaco administrado. O sulfato de condroitina-co-Nisopropilacrilamida (SCM + NIPAAm) é um copolímero proposto para este fim, a partir da reação de um polímero sintético, o poli N-isopropilacrilamida (PNIPAAm), com características termossensíveis, com um natural, o Sulfato de Condroitina (SC), com características bioadesivas. Assim, a copolimerização pode ser capaz de somar estas propriedades e aperfeiçoar o seu uso como um veículo para liberação controlada. Este trabalho objetivou, portanto, realizar a caracterização fisico-quimica das partículas de sulfato de condroitina e Nisopropilacrilamida e do copolímero SCM+NIPAAm (2,5 % e 5%) e do SCM+PNIPAAm 2,5% e uma avaliação toxicológica parcial de um destes copolímeros que apresentar as melhores propriedades de um eficiente carreador de fármacos, selecionado a partir dos ensaios de caracterização físico-química. Para determinar a estrutura química dos sistemas particulados e analisar os seus componentes químicos, foi realizada a Espectroscopia de Ressonância Magnética Nuclear (RMN) e Espectroscopia do Infravermelho com Transformada de Fourrier (FTIR); Para analisar a morfologia das partículas, foi usado a Microscopia Eletrônica de Varredura (MEV); A Termogravimetria/ Termogravimetria Derivada e Análise Térmica Diferencial (TG/DTG) foi usada para avaliar o comportamento térmico dos sistemas particulados, bem como auxiliar na análise de Cinética de Degradação (CD, método de Flynn-Wall-Ozawa); Foi ainda realizado a técnica de degradação in vitro e a determinação carga superficial e tamanho de partículas (análise do Potencial Zeta, PZ). Para avaliar a toxicidade, foi realizado o bioensaio em microcrustáceo Artemia salina (24 e 48 h), viabilidade celular (citotoxicidade) em células PC-12 (método do MTT) e também a toxicidade aguda oral em camundongos. As análises de RMN, FTIR e MEV demonstraram semelhança quanto ao aspecto estrutural e morfológico entre os copolímeros estudados. As análises de TG demonstraram que o SCM+NIPAAm 5% apresentou maior estabilidade térmica em relação aos demais copolímeros avaliados, uma vez que sua decomposição polimérica ocorre em temperaturas superiores, em torno de 233ºC. O DTA demonstrou valores de temperaturas concordantes com os eventos térmicos de decomposição apresentados pelas curvas das análises TG. Sua estabilidade foi confirmada através da CD e estudo de degradação in vitro, apresentando, respectivamente, Ea > 100 kJ mol^-1 e perda de 48% da sua massa inicial após três meses. Além disso, SCM+NIPAAm 5% apresentou diâmetro de partícula inferior a 200 nm e índice de polidispersão de 0,35, além do PZ > -30mV, caracteristicas de um promissor candidato a carreador de fármacos. Em relação às avaliações toxicológicas, o SCM+NIPAAm 5% não apresentou toxicidade no bioensaio de A. salina (CL₅₀ > 1000) e no modelo celular avaliado, dentro das concentrações e circunstâncias de exposição estudadas. O SCM+NIPAAm 5%, na dose oral de 2000 mg/kg, não apresentou nenhum sinal evidente de toxicidade em camundongos, o que foi corroborado pela ausência de alterações anatomo-histopatológicas. A copolimerização do Sulfato de Condroitina e N-isopropilacrilamida na concentração estudada, dada suas características físico-químicas e toxicológicas preliminares, apresenta propriedades que contribuem para a proposta de um sistema que constitui uma nova forma de liberação controlada, especialmente de fármacos.

Estudo de comportamento térmico e de biodegradação de PHBV4% modificado com hidroxiácido

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Processo antissolvente supercrítico para obtenção de dispersões sólidas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal behaviour of nicotinic acid, sodium nicotinate and its compounds with some bivalent transition metal ions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cross linked Poly (4-Vinylpyridine-Ethylene Glycol Dimethacrylate) Used for Preconcentration of Cd(II) and its Determination by Flow Injection Flame Atomic Absorption Spectrometry

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of the combination of probiotic cultures during fermentation and storage of fermented milk

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Oral acetylsalicylic acid and prevalence of actinic keratosis

Objective: To investigate the influence of a regular oral use of acetylsalicylic acid in the prevalence of actinic keratosis.Methods: A case-control study with dermatologic outpatients above 50 years of age assessed between 2009 and 2011. Cases were defined as those who had been under regular use of oral acetylsalicylic acid for more than six consecutive months. The assessment focused on: age, sex, skin-type, tobacco smoking, use of medication, occurrence of individual or family skin cancer, and sunscreen and sun exposure habits. Actinic keratoses were counted in the medial region of the face and upper limbs. Counts were adjusted by co-variables based on a generalized linear model.Results: A total of 74 cases and 216 controls were assessed. The median time of acetylsalicylic acid use was 36 months. Cases differed from controls as to the highest age, highest prevalence of use of angiotensin-converting enzyme inhibitors and fewer keratosis on the face and on the upper limbs (p < 0.05). The multivariate model showed that the use of acetylsalicylic acid was associated to lower counts of face actinic keratosis and upper-limb erythematous actinic keratosis (p < 0.05), regardless of other risk factors.Conclusion: The regular use of oral acetylsalicylic acid for more than six months was associated to a lower prevalence of actinic keratosis, especially facial and erythematous ones.

Two Polyketides from a Co-culture of Two Marine-derived Fungal Strains

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Can Heat Treatment Procedures of Pre-hydrolyzed Silane Replace Hydrofluoric Acid in the Adhesion of Resin Cement to Feldspathic Ceramic?

Purpose: To evaluate the influence of heat treatment (HT) procedures of a pre-hydrolyzed silane on bond strength of resin cement to a feldspathic ceramic.Materials and Methods: Ceramic and composite blocks (N = 30) were divided into six groups (n = 5) and subjected to the following conditioning procedures: G1: 9.6% hydrofluoric acid (HF) for 20 s + silane (RelyX Ceramic Primer, 3M ESPE) + resin cement (Panavia F2.0, Kuraray) (control); G2: HF (20 s) + silane + heat treatment in furnace (HTF) (100 degrees C, 2 min) + resin cement; G3: silane + HTF + resin cement; G4-HF (20 s) + silane + heat treatment with hot air (HTA) (50 +/- 5 degrees C for 1 min) + resin cement; G5: silane + HTA + resin cement; G6: silane + resin cement. The microtensile bond strength (MTBS) test was performed using a universal testing machine (1 mm/min). After debonding, the substrate and adherent surfaces were analyzed using a stereomicroscope and SEM to categorize the failure types. The data were statistically evaluated using one-way ANOVA and Tukey's test (5%).Results: The control group (G1) showed no pre-test failures and presented significantly higher mean MTBS (16.01 +/- 1.12 MPa) than did other groups (2.63 +/- 1.05 to 12.55 +/- 1.52 MPa) (p = 0.0001). In the groups where HF was not used, HTF (G3: 12.55 +/- 1.52 MPa) showed significantly higher MTBS than did HTA (G5: 2.63 +/- 1.05 MPa) (p < 0.05). All failure types were mixed, ie, adhesive between the resin cement and ceramic accompanied by cohesive failure in the cement.Conclusion: Heat treatment procedures for the pre-hydrolyzed silane either in a furnace or with the application of hot air cannot replace the use of HF gel for the adhesion of resin cement to feldspathic ceramic. Yet when mean bond strengths and incidence of pre-test failures are considered, furnace heat treatment delivered the second best results after the control group, being considerably better than hot air application.

Rehydration of corn grain with acid whey improves the silage quality

Our objective was to investigate the effects of rehydration with acid whey or water at three moisture levels, as well as the effects of bacterial inoculation, on the fermentation, chemical composition and aerobic stability of corn grain silages. The trial was conducted in a completely randomized design with four replicates in a factorial arrangement as follows: 3 (rehydration with three different moisture levels: 300,350 and 400 mL/kg of corn grain)x 2 (silage inoculated with bacteria or not inoculated (control))x 2 (liquid used in the rehydration: acid whey or water). Overall, corn grain silages rehydrated with acid whey produced more lactic acid than the silages rehydrated with water (13.8 vs. 12.6 g/kg of dry matter (DM), respectively). In addition, increases in the rehydration of corn grain silages promoted decreases (linear) in lactic acid concentration as well as in production of total acids. Although inoculated silages had higher pH as consequence of the rehydration using water at the three levels, these treatments presented high DM recovery. In general, neutral detergent fiber (aNDFom) decreased if inoculant was applied in corn grain silages rehydrated with acid whey. After silos opening, silages rehydrated with 350 or 400 mL/kg (independent of the liquid) had lower aerobic stability than silages rehydrated with 300 mL/kg. Overall, we found that the inoculant did not promote significant changes in the composition of the corn grain silage. In contrast, the potential of the use of acid whey in ensiling corn grain is high, as its addition leads to improvements in the fermentation process and aerobic stability of the silages. (C) 2014 Elsevier B.V. All rights reserved.

Evaluation of Decomposition Procedure to Determine Ba, Co, Cr, Cu, Ni, Mn, V, and Zn Total Content in Soil Samples

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Improvement of Pro-Oxidant Capacity of Protocatechuic Acid by Esterification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biodegradação de filmes de polipropileno (PP), poli (hidroxibutirato-co-valerato) (PHBV) e blenda pré-irradiados com luz UV

This work intends to investigate the biodegradation of the polymers and blend films of polypropylene (PP) and poly(hidroxybutirate-valerate) (PHBV), after UV radiation to facilitate the PP degradation, which is a polymer with long chains difficult to degrade by biological agents present in the environment. This polymer is outstanding by its mechanical properties and versatility of industrial and commercial use and the PHBV by its quick biodegradability in the environment. Blends of these materials could to present a commitment between mechanical properties and biodegradability to execute its function and after the discard to have lesser lifetime in the garbage landfills. Another aspect of this work is the controlling effect of PP on PHBV, influencing its degradation time

Leuconostoc mesenteroides SJRP55 isolada de mussarela de búfala: perfil probiótico e bacteriocinogênico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Improved pretreatments applied to the sugarcane bagasse and release of lignin and hemicellulose from the cellulose-enriched fractions by sulfuric acid hydrolysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)