Análise das propriedades físico-mecânicas de painel particulado de eucalipto composto por três camadas com duas variações de pressão

The research aimed to produce sheets of particles with waste processing of Eucalyptus sp bonded with urea-formaldehyde and evaluate the effect of pressure variation in the quality of the boards produced. To do so, the Boards made were divided into two treatments depending on the pressing pressure of 30 to 40 kgf / cm². Once pressings, climatized, the particleboards have been sectioned in test samples, and underwent physical-mechanical tests for determining density, swelling and water absorption, modulus of rupture and elasticity in static bending and internal linking. The particleboards pressed at 40 kgf / cm ² showed the best results

Análise das propriedades físicas em estrutura do tecido ósseo de eqüinos

This project has several objectives: To determine medium values and variations of the density, porosity, humidity, shrinkage volume and the coefficient of mass attenuation of gamma radiation of 59,6 keV of the radioisotope 241Am, using samples of equine radio, in growth and adult. The samples of bones were supplied by the Department of Pathology of University of Veterinary Medicine and Zootechnics - UNESP campus Botucatu. Bones of the paws front left of two males were used. Of each bone ten samples were removed. Those samples were prepared to just obtain compact bony fabric, being submitted to the rehearsal of determination of the density by the immersion method in water and determination of the coefficient attenuation lineal for the method of attenuation of the radiation of the 241Am, also obtaining your humidity content. Still, they were obtained new samples starting from the ground samples and verified the density of the particles present in that, obtaining the medium value of the coefficient of mass attenuation. The results showed the medium values and significant statistical variations of the density, porosity, humidity, shrinkage volume and coefficient of mass attenuation of gamma radiation of 59, 6 keV of the radioisotope 241Am in the samples, establishing some relationships between of the certain physical parameters with biological aspects and possible existent influences between them

Estudo das propriedades mecânicas da madeira plástica

This work has in its outline the analysis of the mechanical properties of the composition of plastic residues, denominated “plastic wood”, aiming at establishing technical parameters for application of this material in substitution to the natural wood. Plastic-Wood is basically, a combination of several kind of plastic, previously selected, washed, dried and without metallic particles, which are agglomerated, extruded or introduced into a mold. The manufacturer can choose different formats and colors. During this monograph it can be observed the use of several kind of plastic, their mechanical properties and the plastic-wood production process. Also are presented features and applications of natural wood, in order to better compare their uses in several applications

Avaliação das propriedades antioxidantes da Curcumina em sistemas-modelo in vitro

A curcumina, um pigmento natural extraído do rizoma da Curcuma longa L. é utilizada em alimentos, principalmente aqueles condimentados com curry e açafrão. Vários estudos demonstram seu efeito benéfico em diversas doenças, tais como: diabetes, hepatopatias, câncer, entre outras. Uma de suas propriedades é a atividade antioxidante, pois em pequenas quantidades é capaz de inibir ou retardar processos oxidativos. Para substanciar o estudo desta propriedade, comparou-se a capacidade de captura de espécies reativas radicalares e não radicalares pela curcumina, com padrões (biomoléculas, exceto o trolox) antioxidantes: ascorbato, crocina, glutationa, quercetina, rutina, trolox e urato, em sistemas-modelo in vitro, sobre a captura dos radicais: 2-2'-azino-bis (3-etilbenzotiazolina-6-ácido sulfônico) (ABTS●+ ); 2,2-difenil-1 picril-hidrazila (DPPH● ); ânion radical superóxido (O2 ●-); HOCl/OCl- e H2O2. Investigou-se também seu efeito inibitório na geração do HOCl no sistema, mieloperoxidase (MPO)/H2O2/Cl- (via clorinante) e na inibição da oxidação do guaiacol MPO/H2O2/Guaiacol (via peroxidativa). A curcumina nos ensaios com ABTS●+ ou O2 ●-, apresentou o 3° menor IC50, 4,93 e 99,66 µmol/L, respectivamente; com o DPPH● apresentou o 6° menor IC50, 24,70 µmol/L; com o HOCl/OCl- apresentou o menor IC50, 1,12µmol/L e no ensaio com o H2O2 não atingiu o IC50. No ensaio com o sistema MPO/H2O2/Cl-, observou-se alteração da banda de absorção (bleaching) da curcumina (420 nm), além disso, nos ensaios com a via clorinante (MPO/H2O2/Cl-) e revelados com 3, 3’, 5, 5’- tetrametilbenzidina (TMB) e iodeto de potássio em meio ácido, observou-se aumento da absorbância (650 nm), o que impossibilitou o estudo de sua inibição nesta via. Entretanto, na via peroxidativa, observou-se uma diminuição significativa da absorbância do produto de oxidação... (Resumo completo, clicar acesso eletrônico abaixo)

Doping no esporte: uso de eritropoietina, propriedades, efeitos e detecção

A eritropoietina (EPO) é uma das drogas de uso proibido a atletas, segundo a lista anual da WADA. Este hormônio é uma proteína glicosilada com o potencial de estimular a eritropoiese, aumentando assim a quantidade de glóbulos vermelhos sanguíneos e indiretamente aumentando a capacidade de transporte de oxigênio aos tecidos. Os atletas, com este transporte incrementado, são beneficiados em esportes que exigem resistência física, tendo grande vantagem se comparados a atletas que não fizeram uso de eritropoietina... (O arquivo eletrônico não possui resumo completo)

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Propriedades físicas de vidros Sb2O3-P2O5

This work presents experimental results of some physical properties of antimony phosphate glasses with compositions (x) Sb2O3 - (1-x) P2O5 (x = 0.75, 0.85, 0.90). Mechanical, thermal, optical and electrical properties were investigated: density, elastic moduli (Young's moduli and Poisson's ratio), Vickers microhardness, coefficient of thermal expansion, glass transition temperature, refractive index and electrical conductivity (for x = 0.75). There was no evidence of electronic conductivity by bipolaron hopping. Measurements of energy dispersive spectroscopy (EDS) showed that volatilization of Sb2O3 takes place during the glass melting

Avaliação do efeito da temperatura na deslignificação com o oxigênio nas propriedades do papel

The deslignification with oxygen, also denominated pre-O2, consists in a whitening stage, which consists of accomplishing an oxidation of the lignin, and remove it with the alkali, providing a larger earnings in the bleaching of the pulp. The pre-O2 is a process already very established, where a significant part of the cellulose of whitened short fiber produced nowadays suffers deslignification for this method. The conditions of work of this stage contemplate directly in the results of the deslignification level, in the physical, optical and mechanics properties of the pulp, and consequently of the paper, because this is important to know their effects fully. The main variables related to the control of this process are respectively: pressure and oxygen load, alkaline load, consistence, time and temperature, being this last variable was the study focus in this work. The objective of the work was to analyze the effect of the variation of the temperature in the oxygen whitening along every bleaching process of the pulp, refine and in the optical, physics and mechanics properties of the paper. The development of the work was based in four temperature levels (90, 95, 100 and 105°C) combined to two whitening sequences (OD0(E+P)D1P and OAHTD0(E+P)D1P). The results obtained in the oxygen deslignification stage indicated that the elevation of the temperature contemplated in increases of the whiteness, deslignification efficiency and in the viscosity loss allied to the reduction of the selectivity of the process. In the remaining of the whitening, the sequence that included the acid hydrolysis presented values slightly inferior of whiteness, kappa number, viscosity and yield in relation to the other sequence when compared with the samples of same temperatures. Already the physical tests showed that the sequence with acid stage amplifies the values of capillary... (Complete abstract click electronic access below)

Avaliação da influência da esterilização por radiação gama nas propriedades mecânicas, estruturais e na biocompatibilidade de matrizes híbridas orgânico-inorgânicas

Atualmente, as pesquisas acadêmicas e industriais não estão voltadas apenas para a descoberta de novos fármacos, mas também para novas maneiras de administração de medicamentos pretendendo obter melhores ações farmacológicas alem de reduzir efeitos colaterais. Partindo deste pressuposto, estudos demonstram que inúmeras moléculas podem ser incorporadas a polímeros híbridos orgânico-inorgânico preparados pelo processo sol-gel, assim pretende-se estudar a possibilidade de sua aplicação no desenvolvimento de um dispositivo de liberação controlada de fármacos na forma de implantes subcutâneos. As matrizes hibridas para serem implantadas devem, necessariamente, ser estéreis. Para isto este trabalho analisa a interação entre o processo de esterilização e uma provável alteração estrutural nestes polímeros. A esterilização por calor úmido em autoclave e a esterilização por radiação gama foram escolhidas para analisar a correlação entre alteração estrutural do hibrido e o processo de eliminação de microorganismos. Outro aspecto que levamos em consideração foi a melhora das características mecânicas das matrizes poliméricas confeccionadas com poli óxido etileno de peso molecular 1900 (POE 1900) e poli óxido propileno de peso molecular 400 (POP 400). Para serem implantadas estas matrizes devem estar uniformes, e não podem trincar ou quebrar antes ou após a implantação. Considerando estes fatores foi adicionado as amostras um agente plastificante, o álcool polivinílico (PVA), na tentativa de melhorar estas características

Propriedades estruturais de géis de sílica preparados com adições de dodecil sulfato de sódio

This work aims to study the structural characteristics of silica gels obtained from the acid hydrolysis of tetraethoxysilane (TEOS) in water solutions with different concentrations of sodium dodecyl sulfate (SDS). The structural characteristics were studied in stages ranging from the wet gel to the dry stages of the gels (aerogels and xerogels). Aerogels were obtained by ambient pressure drying (APD) after silylation process using trimethylchlorosilane (TMCS) as silylating agent. Xerogels were obtained by conventional evaporating the liquid phase from non silylated gels. The samples were characterized by nitrogen adsorption and small angle X-ray scattering (SAXS). The structure of the wet gels and of the aerogels prepared with the surfactant exhibited characteristics of mass-fractal structures with fractal dimension D in the range 2.1-2.2 for the wet gels and 2.3-2.4 for the aerogels. The characteristic size  of the fractal domain reduces while the size a0 of the primary silica particle composing the fractal structure increases with the drying of the gels, in a process in which share of the porosity is eliminated. Aerogels exhibited typical values for the specific surface of 900 m2g-1 and of 3.5 cm3.g-1 for the total pore volume. These values are correspondingly comparable to those of the aerogels prepared by supercritical drying, since the silylation process replaces hydrophilic –OH groups by hydrophobic –Si-R3 ones, inhibiting the porosity elimination on drying. The silica particle size also increases lightly with the silylation because the attachment of the –Si-R3 groups on the silica surface. The pore size distribution curves of the aerogels are similar for all samples exhibiting a maximum in around 40 nm, independent the concentration of surfactant. This suggests that the characteristic size of 40 nm is due to the association of surfactant micelles... (Complete abstract click electronic access below)

Propriedades térnicas de géis e xerogéis híbridos de sílica/orgânico à base de GPTS-TEOS com diferentes concentrações de GPTS

In the present work the thermal characteristics of gels and xerogels of Silica/organic hybrids derived from different concentrations of GPTS-TEOS were investigated by thermal analysis (TG, DTA, and DSC). The preparation of gels of the Silica/organic hybrid matrix was held through the sol-gel process, consisting by the hydrolysis of alkoxides GPTS and TEOS in proportion (1:1) and (1:2) that was promoted in acidic conditions under reflux and stirring at 80oC/2h, producing the matrix in the colloidal state (sol). Gels were prepared by addition of NH4OH to the sol, promoting gelation of sol in sealed plastics containers. Part of the gels samples was analyzed by TG, DTS and DSC techniques in order to characterize water loss and degradation of the polymeric “epoxy” groups present in the structure of the silica derived from the GPTS alkoxide. Another set of samples was dried at 80oC/48h to obtain xerogels (dried gels) and analyzed by the same techniques. We obtained the characteristics temperatures of the matrix by the techniques DTA, DSC and TG, under measurements of thermal analysis until 800oC and 600oC in case of DSC. By thermal analysis (TG, DTA, and DSC) the main endothermic events (loss of water, melting, pyrolysis) and exothermic events (burning of the polymer) of the GPTS-TEOS matrix were determined

Caracterização de sensores nanoplasmônicos produzidos com os polímeros pdma e paa: Micaela Gisoldi Ribeiro. –

A combinação de polímeros com nanopartículas de metais nobres resultam na formação de filmes finos, que podem ser utilizado na fabricação de nanosensores. Esses filmes finos possuem propriedades exclusivas, que causam ressonância plasmônica de superfície pela mudança conformacional dos mesmos. Essa variação conformacional é causada pela interação com analito ou por estímulo externo, podendo ser analisada por espectroscopia de absorção na região do UV-vis. Este simples e econômico meio de transdução do sinal apresenta-se como uma ferramenta bastante promissora, e se combinado com a alta seletividade encontrada em reações biológicas, torna-se ainda mais promissora no desenvolvimento de sensores. Os esforços desse projeto foram concentrados para o desenvolvimento dos sensores que respondam a estímulos externo e baseado na utilização de polímeros escovas. Este trabalho de conclusão de curso foi baseada na produção de sensores nanoplasmônicos, que na presença de fatores externos causam modificação estrutural dos filmes finos poliméricos depositados sobre um substrato e dão um resposta altamente seletiva. As mudanças conduzirão à geração de sinais ópticos ou eletroquímico, que serão medidos por transmissão de ressonância plasmônica de superfície ou via eletroquímica. Foram realizados experimentos de voltametria cíclica e impedância eletroquímica em pH=3 para avaliar a capacidade de eletródica deste material. Também foram efetuados experimentos por espectrofotometria de absorção na região de ultravioleta-visível em pHs variando de 3 a 7 para se analisar o efeito plasmônico do material. Pode-se notar que em pH mais ácidos o polímero se mostrou mais condutor e de acordo com a literatura este efeito é causado pela expansão polimérica que deixa o mesmo em seu estado ativo ON (expandido). Já em pH mais básicos os polímeros demonstraram um comportamento inverso por os mesmo se contraem, ...

Estudo da variação do limite de resistência à tração ao longo da bobina de vergalhão de alumínio 1350 AA

Therebar of aluminum 1350 AA produced by CBA are used inthe manufacture of wires and cables for electric power transmission, which marketshows increasingly favorableto aluminum due to itslow densityand high electrical conductivity, but to ensure that this materialmeets all specifications of projectsfor electricity transmission, it must have homogeneity in the chemicaland mechanicalproperties.One of the points of improvement in the process of rod production isreducing the high variation of the limitof tensile strengthalong the coils, therefore, this work seeks a better understanding of the factors that significantly influence the mechanical properties of rebar, specifically assessing the influence oftemperatureat the output of the coils, which can cause a recovery effect on the material andif thereare relevantdifferences between the two modes of rebar production: auto and manual.Samples of six coils have been specifically produced forthis study, which weresubsequently subjected to different annealing temperatures for one hour and ten minutes, similar to what occurs in the output of the coil from the machine. The tensile tests showed that aluminum 1350 AA is significantly influenced by temperature, whose behavior was very similar to that presented in the literature. It was found that the phenomenon of recovery occurred more significantly at high temperatures. Through the optical electron microscope Zeiss, 18 surface maps were made with 100x magnification for each sample in different conditions and the images were analyzed using entropy and fractal dimension, aiming to relate the condition of surface hardening on mechanical property of the samples in that condition. The results showed that these methods can be applied, provided they do not have any kind of imperfection on the surface, once they can influence the results. The study concluded that a more efficient cooling is required in ... (Complete abstract click electronic access below)

Propriedades de adesão e invasão de cepas de Escherichia coli isoladas de pacientes com doença inflamatória intestinal

A Doença Inflamatória Intestinal (DII) engloba um grupo de processos inflamatórios crônicos de causas não conhecidas. Duas formas clínicas da DII são reconhecidas atualmente: a Retocolite Ulcerativa (RU) e a Doença de Crohn (DC). Foram isoladas de 348 amostras, dos quais 17 foram diagnosticados com com DC, e 40 com RU. Os 41 restantes apresentavam outras patologias e compreenderam o grupo controle. Entre as amostras que apresentaram adesão positiva, 110 delas apresentaram padrão de Adesão Agregativa (AA) e 19 apresentaram padrão de Adesão Difusa (AD). A cepa, DII/013, apresentou o padrão de adesão agregativo e invisibilidade média 18 vezes superior à cepa da EIEC. Quando observada ao microscópio eletrônico, bactérias intracelulares foram detectadas na amostra. Assim, a maioria das amostras apresentaram padrão de adesão agregativo, indicando juntamente com estudos anteriores, que esse padrão teria uma possível relação com a patogenicidade da bactéria em relação a DII

Estudo das propriedades físicas em materiais vítreos do sistema 50B2O3 - 15CuO - 20Li2O - 15X (X= Na2O, K2O, RbCI e Cs2O)

The increasing demand for devices for solid state applications in many technological areas has resulted in a high demand for new materials. Among these material have the advantage of being manufactured with different chemical compositions, and may have physical properties equal to or higher than the corresponding crystalline material. The aim of this paper was to produce borate glass system 50B2O3 – 15CuO – 20Li2O – 15X (X = Na2O, K2O, RbCl e Cs2O) to analyze the influence of the atomic radius of alkali in the physical properties of this glass system. The glasses were synthesized by the process of melting and molding. The characteristic temperatures were determined by the technique of scanning calorimetry (DSC). The non-crystalline was determined by x-ray diffraction. In order to determine the molar volume a density measurement by using the Archimedes method was used. The structural characterization was carried out using the technique of infrared spectroscopy