时间序列修订对森林二氧化碳通量的影响

对长白山阔叶红松林 2 0 0 3年生长季的涡动相关实测时间序列进行了去倾修订与超声风速仪倾斜修订 ,并分析了不同修订方法对森林CO2 通量计算值的影响 .结果表明 ,基于未修订时间序列计算得到的森林CO2 通量 (Fcraw)被高估 .线性与非线性去倾对Fcraw的修订量分别为 1 6 %、1 8% ,两者差异很小 .平面拟合坐标变换与流线坐标变换对Fcraw的修订量分别为 3 7%、4 7% ,两者差异较大 .对线性去倾后的时间序列分别进行流线坐标变换与平面拟合坐标变换 ,二者对Fcraw的修订量分别为 5 5 %与 4 6 % .建议对时间序列进行线性去倾与平面拟合坐标变换综合修订 .

异养微生物在金属生物淋滤技术中的应用

生物淋滤技术主要应用于低品位矿石金属选矿、煤气脱硫、废弃物中金属回收和污染介质中金属离子毒性的去除等方面。作为生物淋滤技术中的主体微生物之一,异养微生物可通过其产生的酸性代谢物还原、酸化及络合,提取或者溶解非硫化矿、固体废弃物、污水污泥及土壤中的金属,有助于解决目前的资源短缺问题,还可对污染环境治理提供技术支持,具有重要的理论意义和实践价值。应用于异养微生物淋滤技术中的常见微生物包括细菌(以假单胞菌为主)和真菌(以曲霉菌和青霉菌应用最为广泛)。淋滤过程涉及酸解、络合、还原及碱化等。目前,异养微生物淋滤技术主要应用于生物冶金、固体废弃物处理、污水处理和污染土壤修复等。本文分析了异养微生物金属淋滤过程中的问题,并提出了未来研究的发展方向。

鱇白鱼的池塘人工驯养方法

本发明涉及一种鱇白鱼的池塘人工驯养方法，属鱼产品养殖技术领域。鱇白鱼的池塘人工驯养方法为先用消毒剂对池塘进行清塘，随后放入清水，其水深为0.8米，此时将鱼苗放入池中，驯养期间水温在8-25℃，鱼苗投喂时间为每日二次，投喂的饲料分别为：一个月前喂蛋黄或轮虫，随后喂蛋黄、豆浆和混合饲料，5个月后投喂混合饲料，饲料的喂量为蛋黄每次5个，豆浆每天0.5公斤黄豆研磨成浆，混合饲料早期每次1公斤，随着鱼体长大酌情增量。采用本鱇白鱼的池塘人工驯养方法，具有操作简便，成本低廉，鱼苗成活率高，并将在自然状况下，生长到5厘米左右时便进入40-50米的深水区生长发育，直到性成熟后才洄游到浅水区的砾石砂滩和溶洞出水口处产卵的抚仙湖特有鱼类——鱇白鱼驯化成为一种池塘人工养殖品种等优点。

Structure and luminescent properties of YAG : Eu, Bi synthesized by sol-gel method

(Y1-xEux)(3)Al5O12 and (Y1-x-yEuxBiy)(3)Al5O12 were prepared by so-gel method. Their structures of the luminophor are similar to that of YAG, which is recorded on the ASTM card and belongs to a cubic system. The luminescent properties show that the reaction temperature of the current sol-gel method is in the range of 400-500 degrees C, which is lower than that of the conventional solid state reaction. The luminophors have the strongest emission intensity when the values of x and y are 0.06 and 0.013, respectively.

YAG∶Eu~(3+)、Bi~(3+)的溶胶-凝胶法合成及其结构和发光性能

溶胶－凝胶法以其各组分混合均匀性好、反应温度低、节省能源等诸多优点而引起了人们极大兴趣［１，２］．近年来，利用该法研制玻璃和陶瓷等无机材料的报道越来越多［３，４］．但研制稀土固体发光材料的报道则较少．钇铝石榴石Ｙ３Ａｌ５Ｏ１２（ＹＡＧ）是一种很好的基…

Isolation, spectra, structure, and ring-opening polymerization of strained macrocyclic aryl(ether ketone) dimer

Macrocyclic arylene ether ketone dimer was isolated from a mixture of cyclic oligomers obtained by the nucleophilic substitution reaction of bisphenol A and 4,4'-difluorobenzophenone and easily polymerized to high molecular weight linear poly(ether ketone). The cyclic compound was characterized by FTIR, H-1- and C-13-NMR, and single-crystal x-ray diffraction. Analysis of the spectral and crystal structure reveals extreme distortions of he phenyl rings attached to the isopropylidene center and of the turning points of the molecular polygons. The release of the ring strain on ring-opening combined with entropical difference between the linear polymer chain and the more rigid macrocycle at temperatures of polymerization may be the proposed motivating factors in the polymerization of this precursor to high molecular weight poly(ether ketone). (C) 1997 John Wiley & Sons, Inc.

稀土（Nd，Pr）（Ⅲ）双酞菁衍生物的合成、表征和气敏特性

合成了八－４－（四氢糠氧基）酞菁钕（Ⅲ）（Ａ）、八－４－（β－萘氧基）酞菁钕（Ⅲ）（Ｂ）、八－４－（２，４－二叔戊基苯氧基）酞菁钕（Ⅲ）（Ｃ）和八－４－（２，４－二叔戊基苯氧基）酞菁镨（Ⅲ）（Ｄ）４种新的稀土（Ｎｄ、Ｐｒ）（Ⅲ）双酞菁衍生物，经元素分析、红外光谱、核磁共振谱表征．紫外可见光谱表明，它们在氯仿（１０￣（－６）ｍｏｌ／Ｌ）溶液中以单分子形式存在．热重分析证明配合物的热稳定性：Ｂ＞Ｃ～Ｄ＞Ａ．４种配合物成膜性好，Ｚ型沉积形成的单层ＬＢ膜材料对氨气有响应，特别是八－４－（四氢糠氧基）酞菁钕（Ⅲ）的膜材料对氨气很敏感，可与铜酞菁ＬＢ膜气敏性相比．

PREPARATION AND MOLECULAR-STRUCTURE OF METHYLBIS(TERT-BUTYLCYCLOPENTADIENYL)NEODYMIUM AND METHYLBIS(TERT-BUTYLCYCLOPENTADIENYL)GADOLINIUM

Bis(t-butylcyclopentadienyl)lanthanide chloride (Ln = Nd or Gd) reacts with one equivalent of methyllithium in ether/tetrahydrofuran to give the complex [(C5H4tBu)2LnCH3]2 (Ln = Nd or Gd). The structure of [(C5H4tBu)2NdCH3]2 has been determined by X-ray analysis. The crystals are monoclinic of space group Cm with a = 9.538(2), b = 23.298(4), c = 9.505(3) angstrom, beta = 119.53(2)-degrees, V = 1828.0(7) angstrom 3, D(calc.) = 1.458 g/cm3 and Z = 2 for the dimer. The two (C5H4tBu)2Nd units in the dimer are connected by asymmetrical methyl bridges with independent Nd-C bond lengths of 2.70(2) and 2.53(2) angstrom and Nd-C-Nd angles of 94.7(9) and 87.3(6)-degrees.

STRUCTURE OF HEXAMETHYLENETETRATELLURAFULVALENE DIIODIDE

C12H12I2Te4, M(r) = 920.44, monoclinic, P2(1)/n, a = 10.942 (2), b = 14.924 (2), c = 11.415 (2) angstrom, beta = 104.32 (1)-degrees, V = 1806.0 (5) angstrom 3, Z = 4, D(x) = 3.38 g cm-3, lambda(Mo K-alpha) = 0.71069 angstrom, mu = 100.7 cm-1, F(000) = 1592, T = 294 K, R = 0.033 for 1828 observed reflections. One of the Te atoms is bonded to the two I atoms, which are on either side of the molecular plane. The Te-I distances are 2.963 (1) and 2.961 (1) angstrom, which means oxidation at the Te atom instead of at the C = C bonds.

Origin of a native sulfur chimney in the Kueishantao hydrothermal field, offshore northeast Taiwan

Analyses of rare earth and trace element concentrations of native sulfur samples from the Kueishantao hydrothermal field were performed at the Seafloor Hydrothermal Activity Laboratory of the Key Laboratory of Marine Geology and Environment, Institute of Oceanology, Chinese Academy of Sciences. Using an Elan DRC II ICP-MS, and combining the sulfur isotopic compositions of native sulfur samples, we studied the sources and formation of a native sulfur chimney. The results show, when comparing them with native sulfur from crater lakes and other volcanic areas, that the native sulfur content of this chimney is very high (99.96%), the rare earth element (REE) and trace element constituents of the chimney are very low (Sigma REE < 21x10(-9)), and the chondrite-normalized REE patterns of the native sulfur samples are similar to those of the Kueishantao andesite, implying that the interaction of subseafloor fluid-andesite at the Kueishantao hydrothermal field was of short duration. The sulfur isotopic compositions of the native sulfur samples reveal that the sulfur of the chimney, from H2S and SO2, originated by magmatic degassing and that the REEs and trace elements are mostly from the Kueishantao andesite and partly from seawater. Combining these results with an analysis of the thermodynamics, it is clear that from the relatively low temperature (< 116 degrees C), the oxygenated and acidic environment is favorable for formation of this native sulfur chimney in the Kueishantao hydrothermal field.

Distribution and species diversity of plant communities along transect on the Northeastern Tibetan plateau

The distribution and species diversity of plant communities along a 600 km transect through the northeastern Tibetan Plateau (32 degrees 42'-35 degrees 07' N, 101 degrees 02'-97 degrees 38' E) with altitudes from 3255 to 4460 m are described. The transect started from the Youyi Bridge of Banma through Dari, Maqin and Maduo to Zaling Lake. The data from 47 plots along the transect are summarized and analyzed. The mean annual temperature, the mean annual rainfall and the length of growing season decreases from 2.6 to -4.5 degrees C, from 767.2 to 240.1 mm, from 210 to 140 days, respectively, along the transect from the southeastern Banma to northwestern Zaling Lake. The number of vascular plant species recorded in 47 plots is 242 including 2 tree, 34 shrub, 206 herb species. Main vegetation types on the transect from southeast to northwest are: Sabina convallium forest, Picea likiangensis forest, Pyracantha fortuneana + Spiraea alpina shrub, Hippophae neurocarpu shrub, Sibiraea angustata + Polygonum viviparum shrub, Stellera chamaejasme herb meadow, Potentilla fruticosa + Salix obscura + Carex sp. Shrub, Kobresia capillifolia meadow, P. froticosa + Kobresia humilis shrub, Caragana jubata + S. obscura shrub, Kobresia tibetica meadow, Kobresia pygmaea meadow, K. pygmaea + Stipa purpurea steppe meadow, Stipa purpurea steppe. Plant richness and diversity index all showed a decreasing trend with increasing of elevation along transect from southeast to northwest. Detailed information on altitudinal ranges and distribution of the alpine vegetation, vascular flora and environments over the alpine zone at northeastern Tibetan Plateau provides baseline records relevant to future assessment of probable effects of global climate changes.