A solution to the three disjoint path problem on honeycomb tori

In a previous paper we solved an open problem named as the three disjoint path problem on honeycomb meshes. In this paper we extend the technique used to solve the related problem on honeycomb tori. The result gives the minimum possible length of the longest of any three disjoint paths between two given nodes in a torus. The problem has practical benefits in the fault tolerant aspects of interconnection topologies.

A solution to the three disjoint path problem on honeycomb meshes

Recently honeycomb meshes have been considered as alternative candidates for interconnection networks in parallel and distributed computer systems. This paper presents a solution to one of the open problems about honeycomb meshes—the so-called three disjoint path problem. The problem requires minimizing the length of the longest of any three disjoint paths between 3-degree nodes. This solution provides information on the re-routing of traffic along the network in the presence of faults.

Two-Path All-pass Based Half-Band Infinite Impulse Response Decimation Filters and the Effects of Their Non-Linear Phase Response on ECG Signal Acquisition

This paper is based on the novel use of a very high fidelity decimation filter chain for Electrocardiogram (ECG) signal acquisition and data conversion. The multiplier-free and multi-stage structure of the proposed filters lower the power dissipation while minimizing the circuit area which are crucial design constraints to the wireless noninvasive wearable health monitoring products due to the scarce operational resources in their electronic implementation. The decimation ratio of the presented filter is 128, working in tandem with a 1-bit 3rd order Sigma Delta (ΣΔ) modulator which achieves 0.04 dB passband ripples and -74 dB stopband attenuation. The work reported here investigates the non-linear phase effects of the proposed decimation filters on the ECG signal by carrying out a comparative study after phase correction. It concludes that the enhanced phase linearity is not crucial for ECG acquisition and data conversion applications since the signal distortion of the acquired signal, due to phase non-linearity, is insignificant for both original and phase compensated filters. To the best of the authors’ knowledge, being free of signal distortion is essential as this might lead to misdiagnosis as stated in the state of the art. This article demonstrates that with their minimal power consumption and minimal signal distortion features, the proposed decimation filters can effectively be employed in biosignal data processing units.

On the Nature of Temporal Variability of the Gulf Stream Path from 75° to 55°W

The response of the Gulf Stream (GS) system to atmospheric forcing is generally linked either to the basin-scale winds on the subtropical gyre or to the buoyancy forcing from the Labrador Sea. This study presents a multiscale synergistic perspective to describe the low-frequency response of the GS system. The authors identify dominant temporal variability in the North Atlantic Oscillation (NAO), in known indices of the GS path, and in the observed GS latitudes along its path derived from sea surface height (SSH) contours over the period 1993-2013. The analysis suggests that the signature of interannual variability changes along the stream's path from 75 degrees to 55 degrees W. From its separation at Cape Hatteras to the west of 65 degrees W, the variability of the GS is mainly in the near-decadal (7-10 years) band, which is missing to the east of 60 degrees W, where a new interannual (4-5 years) band peaks. The latter peak (4-5 years) was missing to the west of 65 degrees W. The region between 65 degrees and 60 degrees W seems to be a transition region. A 2-3-yr secondary peak was pervasive in all time series, including that for the NAO. This multiscale response of the GS system is supported by results from a basin-scale North Atlantic model. The near-decadal response can be attributed to similar forcing periods in the NAO signal; however, the interannual variability of 4-5 years in the eastern segment of the GS path is as yet unexplained. More numerical and observational studies are warranted to understand such causality.

On the Nature of Temporal Variability of the Gulf Stream Path from 75° to 55°W

The response of the Gulf Stream (GS) system to atmospheric forcing is generally linked either to the basin-scale winds on the subtropical gyre or to the buoyancy forcing from the Labrador Sea. This study presents a multiscale synergistic perspective to describe the low-frequency response of the GS system. The authors identify dominant temporal variability in the North Atlantic Oscillation (NAO), in known indices of the GS path, and in the observed GS latitudes along its path derived from sea surface height (SSH) contours over the period 1993-2013. The analysis suggests that the signature of interannual variability changes along the stream's path from 75 degrees to 55 degrees W. From its separation at Cape Hatteras to the west of 65 degrees W, the variability of the GS is mainly in the near-decadal (7-10 years) band, which is missing to the east of 60 degrees W, where a new interannual (4-5 years) band peaks. The latter peak (4-5 years) was missing to the west of 65 degrees W. The region between 65 degrees and 60 degrees W seems to be a transition region. A 2-3-yr secondary peak was pervasive in all time series, including that for the NAO. This multiscale response of the GS system is supported by results from a basin-scale North Atlantic model. The near-decadal response can be attributed to similar forcing periods in the NAO signal; however, the interannual variability of 4-5 years in the eastern segment of the GS path is as yet unexplained. More numerical and observational studies are warranted to understand such causality.

Feature recognition & tool path generation for 5 axis step-nc machining of free form / irregular contoured surfaces

This research paper presents a five step algorithm to generate tool paths for machining Free form / Irregular Contoured Surface(s) (FICS) by adopting STEP-NC (AP-238) format. In the first step, a parametrized CAD model with FICS is created or imported in UG-NX6.0 CAD package. The second step recognizes the features and calculates a Closeness Index (CI) by comparing them with the B-Splines / Bezier surfaces. The third step utilizes the CI and extracts the necessary data to formulate the blending functions for identified features. In the fourth step Z-level 5 axis tool paths are generated by adopting flat and ball end mill cutters. Finally, in the fifth step, tool paths are integrated with STEP-NC format and validated. All these steps are discussed and explained through a validated industrial component.

Integration of cad/ tool path data for 5-axis step-nc machining of free form / irrregular contoured surfaces

This research paper presents the work on feature recognition, tool path data generation and integration with STEP-NC (AP-238 format) for features having Free form / Irregular Contoured Surface(s) (FICS). Initially, the FICS features are modelled / imported in UG CAD package and a closeness index is generated. This is done by comparing the FICS features with basic B-Splines / Bezier curves / surfaces. Then blending functions are caculated by adopting convolution theorem. Based on the blending functions, contour offsett tool paths are generated and simulated for 5 axis milling environment. Finally, the tool path (CL) data is integrated with STEP-NC (AP-238) format. The tool path algorithm and STEP- NC data is tested with various industrial parts through an automated UFUNC plugin.

Hierarchical concept of optimization based path planning for autonomous driving

Otto-von Guericke-Universität Magdeburg, Fakultät für Maschinenbau, Dissertation, 2016

The Path between Pedagogy and Technology: Establishing a Theoretical Basis for the Development of Educational Game Environments

The power of computer game technology is currently being harnessed to produce “serious games”. These “games” are targeted at the education and training marketplace, and employ various key game-engine components such as the graphics and physics engines to produce realistic “digital-world” simulations of the real “physical world”. Many approaches are driven by the technology and often lack a consideration of a firm pedagogical underpinning. The authors believe that an analysis and deployment of both the technological and pedagogical dimensions should occur together, with the pedagogical dimension providing the lead. This chapter explores the relationship between these two dimensions, and explores how “pedagogy may inform the use of technology”, how various learning theories may be mapped onto the use of the affordances of computer game engines. Autonomous and collaborative learning approaches are discussed. The design of a serious game is broken down into spatial and temporal elements. The spatial dimension is related to the theories of knowledge structures, especially “concept maps”. The temporal dimension is related to “experiential learning”, especially the approach of Kolb. The multi-player aspect of serious games is related to theories of “collaborative learning” which is broken down into a discussion of “discourse” versus “dialogue”. Several general guiding principles are explored, such as the use of “metaphor” (including metaphors of space, embodiment, systems thinking, the internet and emergence). The topological design of a serious game is also highlighted. The discussion of pedagogy is related to various serious games we have recently produced and researched, and is presented in the hope of informing the “serious game community”.

Approaches to documents of the Quebrada de Humahuaca, a path of exploration file of the Prelature of Humahuaca.

The work of cataloging and digitizing the Historical Ar-chive of the Prelature of Humahuaca, presents us with documen-tary mass, almost unused for historical research. Due to organiza-tional reasons, this documentary heritage was limited to consulta-tion of researchers. The development of “Documenta” project will allow us to know the contents of that file, get closer to these do-cuments for consultation and scientific production.

Maurer, Markus: Skill Formation Regimes in South Asia, A Comparative Study on the Path-Dependent Development of Technical and Vocational Education and Training for the Garment Industry (Komparatistische Bibliothek; Bd. 21). Frankfurt am Main: Peter Lang 2011 [Rezension]

Rezension von: Maurer, Markus: Skill Formation Regimes in South Asia, A Comparative Study on the Path-Dependent Development of Technical and Vocational Education and Training for the Garment Industry (Komparatistische Bibliothek; Bd. 21), Frankfurt am Main: Peter Lang 2011 (449 S.; ISBN Skill Formation Regi)

Random path sampling applied to vector models of magnetism

The recently reported Monte Carlo Random Path Sampling method (RPS) is here improved and its application is expanded to the study of the 2D and 3D Ising and discrete Heisenberg models. The methodology was implemented to allow use in both CPU-based high-performance computing infrastructures (C/MPI) and GPU-based (CUDA) parallel computation, with significant computational performance gains. Convergence is discussed, both in terms of free energy and magnetization dependence on field/temperature. From the calculated magnetization-energy joint density of states, fast calculations of field and temperature dependent thermodynamic properties are performed, including the effects of anisotropy on coercivity, and the magnetocaloric effect. The emergence of first-order magneto-volume transitions in the compressible Ising model is interpreted using the Landau theory of phase transitions. Using metallic Gadolinium as a real-world example, the possibility of using RPS as a tool for computational magnetic materials design is discussed. Experimental magnetic and structural properties of a Gadolinium single crystal are compared to RPS-based calculations using microscopic parameters obtained from Density Functional Theory.

Between path dependency and contingency: new challenges for the geography of port system evolution.

Seaports play a critical role as gateways and facilitators of economic interchange and logistics processes and thus have become crucial nodes in globalised production networks andmobility systems. Both the physical port infrastructure and its operational superstructure have undergone intensive evolution processes in an effort to adapt to changing economic environments, technological advances,maritime industry expectations and institutional reforms. The results, in terms of infrastructure, operator models and the role of an individual port within the port system, vary by region, institutional and economic context. While ports have undoubtedly developed in scale to respond to the changing volumes and structures in geographies of trade (Wilmsmeier, 2015), the development of hinterland access infrastructure, regulatory systems and institutional structures have in many instances lagged behind. The resulting bottlenecks reflect deficits in the interplay between the economic system and the factors defining port development (e.g. transport demand, the structure of trade, transport services, institutional capacities, etc. cf. Cullinane and Wilmsmeier, 2011). There is a wide range of case study approaches and analyses of individual ports, but analyses from a port system perspective are less common, and those that exist are seldom critical of the dominant discourse assuming the efficiency of market competition (cf. Debrie et al., 2013). This special section aims to capture the spectrum of approaches in current geography research on port system evolution. Thus, the papers reach from the traditional spatial approach (Rodrigue and Ashar, this volume) to network analysis (Mohamed-Chérif and Ducruet, this volume) to institutional discussions (Vonck and Notteboom, this volume; Wilmsmeier and Monios, this volume). The selection of papers allows an opening of discussion and reflection on current research, necessary critical analysis of the influences on port systemevolution and,most importantly, future directions. The remainder of this editorial aims to reflect on these challenges and identify the potential for future research.

Continuum tensor network field states, path integral representations and spatial symmetries

A natural way to generalize tensor network variational classes to quantum field systems is via a continuous tensor contraction. This approach is first illustrated for the class of quantum field states known as continuous matrix-product states (cMPS). As a simple example of the path-integral representation we show that the state of a dynamically evolving quantum field admits a natural representation as a cMPS. A completeness argument is also provided that shows that all states in Fock space admit a cMPS representation when the number of variational parameters tends to infinity. Beyond this, we obtain a well-behaved field limit of projected entangled-pair states (PEPS) in two dimensions that provide an abstract class of quantum field states with natural symmetries. We demonstrate how symmetries of the physical field state are encoded within the dynamics of an auxiliary field system of one dimension less. In particular, the imposition of Euclidean symmetries on the physical system requires that the auxiliary system involved in the class' definition must be Lorentz-invariant. The physical field states automatically inherit entropy area laws from the PEPS class, and are fully described by the dissipative dynamics of a lower dimensional virtual field system. Our results lie at the intersection many-body physics, quantum field theory and quantum information theory, and facilitate future exchanges of ideas and insights between these disciplines.