The evolution of high-temperature mylonitic microfabrics: evidence from simple shearing of a quartz analogue (norcamphor)

Plane strain simple shearing of norcamphor (C7H10O) in a see-through deformation rig to a shear strain of γ = 10.5 at a homologous temperature of Th = 0.81 yields a microfabric similar to that of quartz in amphibolite facies mylonite. Synkinematic analysis of the norcamphor microfabric reveals that the development of a steady-state texture is linked to changes in the relative activities of several grain-scale mechanisms. Three stages of textural and microstructural evolution are distinguished: (1) rotation and shearing of the intracrystalline glide planes are accommodated by localized deformation along three sets of anastomozing microshears. A symmetrical c-axis girdle reflects localized pure shear extension along the main microshear set (Sa) oblique to the bulk shear zone boundary (abbreviated as SZB); (2) progressive rotation of the microshears into parallelism with the SZB increases the component of simple shear on the Sa microshears. Grain-boundary migration recrystallization favours the survival of grains with slip systems oriented for easy glide. This is associated with a textural transition towards two stable c-axis point maxima whose skeletal outline is oblique with respect to the Sa microshears and the SZB; and (3) at high shear strains (γ > 8), the microstructure, texture and mechanism assemblage are strain invariant, but strain continues to partition into rotating sets of microshears. Steady state is therefore a dynamic, heterogeneous condition involving the cyclic nucleation, growth and consumption of grains.

Nest choice in laying hens: Effects of nest partitions and social status.

Nest choice in loose-housed laying hens is influenced by nest characteristics, position and social factors. We examined the relative preference of laying hens for two group-nests differing in the presence or absence of a partition in the middle of the nest and whether this was influenced by social status. We hypothesized that hens would prefer the partitioned nest as it provides more enclosure, and that social status would affect nest choice. Relative preference for the nests was assessed in a free choice preference test conducted in two consecutive trials each with eight groups of 20 hens from 18 to 31 weeks of age. The hens were individually marked and had access to two commercial group-nests (49 × 114 cm), one of which contained an internal wooden partition (30 × 10 cm) which divided the nest in two halves. At 28 weeks of age, the position of the nests was switched. The number of eggs laid was recorded daily. On one day each at 24 and 28 weeks of age (after the nest switch) video recordings were made of the first 5 h of daylight. From these videos we recorded the number of nest visits per egg per nest and the number of nest visits for individual hens. On one day each at 24 and 27 weeks of age we also recorded videos from within the nests to assess individual nest choice for egg-laying. In addition, we recorded aggressive interactions between individual hens during the first hour of light on one day each at 18, 24 and 27 weeks of age to establish social status. We found a relative preference for the partition nest with a greater proportion of eggs laid in these nests as well as fewer nest visits per egg. The hens were also consistent in their egg-laying location over the two days of observation. After the nest switch, however, the hens did not switch egg laying location and the number of visits per egg no longer differed between nests suggesting that the preference for the partitioned nest was only important at the beginning of lay. In addition, although social rank had no impact on preference of nest type, lower ranking hens performed more nest visits and laid their eggs slightly later on the second observation day (week 27 of age) compared with higher ranking hens. Therefore, the use of partitions could improve the attractiveness of group-nests.

Chapter 8 Location Choice of Japanese Multinationals: Country Characteristics or Region Characteristics?

In the present global era in which firms choose the location of their plants beyond national borders, location characteristics are important for attracting multinational enterprises (MNEs). The better access to countries with large market is clearly attractive for MNEs. For example, special treatments on tariffs such as the Generalized System of Preferences (GSP) are beneficial for MNEs whose home country does not have such treatments. Not only such country characteristics but also region characteristics (i.e. province-level or city-level ones) matter, particularly in the case that location characteristics differ widely between a nation's regions. The existence of industrial concentration, that is, agglomeration, is a typical regional characteristic. It is with consideration of these country-level and region-level characteristics that MNEs decide their location abroad. A large number of academic studies have investigated in what kinds of countries MNEs locate, i.e. location choice analysis. Employing the usual new economic geography model (i.e. constant elasticity of substitution (CES) utility function, Dixit-Stiglitz monopolistic competition, and ice-berg trade costs), the literature derives the profit function, of which coefficients are estimated using maximum likelihood procedures. Recent studies are as follows: Head, Rise, and Swenson (1999) for Japanese MNEs in the US; Belderbos and Carree (2002) for Japanese MNEs in China; Head and Mayer (2004) for Japanese MNEs in Europe; Disdier and Mayer (2004) for French MNEs in Europe; Castellani and Zanfei (2004) for large MNEs worldwide; Mayer, Mejean, and Nefussi (2007) for French MNEs worldwide; Crozet, Mayer, and Mucchielli (2004) for MNEs in France; and Basile, Castellani, and Zanfei (2008) for MNEs in Europe. At the present time, three main topics can be found in this literature. The first introduces various location elements as independent variables. The above-mentioned new economic geography model usually yields the profit function, which is a function of market size, productive factor prices, price of intermediate goods, and trade costs. As a proxy for the price of intermediate goods, the measure of agglomeration is often used, particularly the number of manufacturing firms. Some studies employ more disaggregated numbers of manufacturing firms, such as the number of manufacturing firms with the same nationality as the firms choosing the location (e.g., Head et al., 1999; Crozet et al., 2004) or the number of firms belonging to the same firm group (e.g., Belderbos and Carree, 2002). As part of trade costs, some investment climate measures have been examined: free trade zones in the US (Head et al., 1999), special economic zones and opening coastal cities in China (Belderbos and Carree, 2002), and Objective 1 structural funds and cohesion funds in Europe (Basile et al., 2008). Second, the validity of proxy variables for location elements is further examined. Head and Mayer (2004) examine the validity of market potential on location choice. They propose the use of two measures: the Harris market potential index (Harris, 1954) and the Krugman-type index used in Redding and Venables (2004). The Harris-type index is simply the sum of distance-weighted real GDP. They employ the Krugman-type market potential index, which is directly derived from the new economic geography model, as it takes into account the extent of competition (i.e. price index) and is constructed using estimators of importing country dummy variables in the well-known gravity equation, as in Redding and Venables (2004). They find that "theory does not pay", in the sense that the Harris market potential outperforms Krugman's market potential in both the magnitude of its coefficient and the fit of the model to be estimated. The third topic explores the substitution of location by examining inclusive values in the nested-logit model. For example, using firm-level data on French investments both in France and abroad over the 1992-2002 period, Mayer et al. (2007) investigate the determinants of location choice and assess empirically whether the domestic economy has been losing attractiveness over the recent period or not. The estimated coefficient for inclusive value is strongly significant and near unity, indicating that the national economy is not different from the rest of the world in terms of substitution patterns. Similarly, Disdier and Mayer (2004) investigate whether French MNEs consider Western and Eastern Europe as two distinct groups of potential host countries by examining the coefficient for the inclusive value in nested-logit estimation. They confirm the relevance of an East-West structure in the country location decision and furthermore show that this relevance decreases over time. The purpose of this paper is to investigate the location choice of Japanese MNEs in Thailand, Cambodia, Laos, Myanmar, and Vietnam, and is closely related to the third topic mentioned above. By examining region-level location choice with the nested-logit model, I investigate the relative importance of not only country characteristics but also region characteristics. Such investigation is invaluable particularly in the case of location choice in those five countries: industrialization remains immature in those countries which have not yet succeeded in attracting enough MNEs, and as a result, it is expected that there are not yet crucial regional variations for MNEs within such a nation, meaning the country characteristics are still relatively important to attract MNEs. To illustrate, in the case of Cambodia and Laos, one of the crucial elements for Japanese MNEs would be that LDC preferential tariff schemes are available for exports from Cambodia and Laos. On the other hand, in the case of Thailand and Vietnam, which have accepted a relatively large number of MNEs and thus raised the extent of regional inequality, regional characteristics such as the existence of agglomeration would become important elements in location choice. Our sample countries seem, therefore, to offer rich variations for analyzing the relative importance between country characteristics and region characteristics. Our empirical strategy has a further advantage. As in the third topic in the location choice literature, the use of the nested-logit model enables us to examine substitution patterns between country-based and region-based location decisions by MNEs in the concerned countries. For example, it is possible to investigate empirically whether Japanese multinational firms consider Thailand/Vietnam and the other three countries as two distinct groups of potential host countries, by examining the inclusive value parameters in nested-logit estimation. In particular, our sample countries all experienced dramatic changes in, for example, economic growth or trade costs reduction during the sample period. Thus, we will find the dramatic dynamics of such substitution patterns. Our rigorous analysis of the relative importance between country characteristics and region characteristics is invaluable from the viewpoint of policy implications. First, while the former characteristics should be improved mainly by central government in each country, there is sometimes room for the improvement of the latter characteristics by even local governments or smaller institutions such as private agencies. Consequently, it becomes important for these smaller institutions to know just how crucial the improvement of region characteristics is for attracting foreign companies. Second, as economies grow, country characteristics become similar among countries. For example, the LCD preferential tariff schemes are available only when a country is less developed. Therefore, it is important particularly for the least developed countries to know what kinds of regional characteristics become important following economic growth; in other words, after their country characteristics become similar to those of the more developed countries. I also incorporate one important characteristic of MNEs, namely, productivity. The well-known Helpman-Melitz-Yeaple model indicates that only firms with higher productivity can afford overseas entry (Helpman et al., 2004). Beyond this argument, there may be some differences in MNEs' productivity among our sample countries and regions. Such differences are important from the viewpoint of "spillover effects" from MNEs, which are one of the most important results for host countries in accepting their entry. The spillover effects are that the presence of inward foreign direct investment (FDI) aises domestic firms' productivity through various channels such as imitation. Such positive effects might be larger in areas with more productive MNEs. Therefore, it becomes important for host countries to know how much productive firms are likely to invest in them. The rest of this paper is organized as follows. Section 2 takes a brief look at the worldwide distribution of Japanese overseas affiliates. Section 3 provides an empirical model to examine their location choice, and lastly, we discuss future works to estimate our model.

Neutrality in the choice of number of firms or level of fixed costs in calibrating an Armington-Krugman-Melitz encompassing module for applied general equilibrium models

This paper shows how an Armington-Krugman-Melitz encompassing module based on Dixon and Rimmer (2012) can be calibrated, and clarifies the choice of initial levels for two kinds of number of firms, or parameter values for two kinds of fixed costs, that enter a Melitz-type specification can be set freely to any preferred value, just as the cases we derive quantities from given value data assuming some of the initial prices to be unity. In consequence, only one kind of additional information, which is on the shape parameter related to productivity, just is required in order to incorporate Melitz-type monopolistic competition and heterogeneous firms into a standard applied general equilibrium model. To be a Krugman-type, nothing is needed. This enables model builders in applied economics to fully enjoy the featured properties of the theoretical models invented by Krugman (1980) and Melitz (2003) in practical policy simulations at low cost.

Simulation analysis of the EU ELV/RoHS directives based on an applied general equilibrium model with Melitz-type trade specification

This paper explores the potential usefulness of an AGE model with the Melitz-type trade specification to assess economic effects of technical regulations, taking the case of the EU ELV/RoHS directives as an example. Simulation experiments reveal that: (1) raising the fixed exporting cost to make sales in the EU market brings results that exports of the targeted commodities (motor vehicles and parts for ELV and electronic equipment for RoHS) to the EU from outside regions/countries expand while the domestic trade in the EU shrinks when the importer's preference for variety (PfV) is not strong; (2) if the PfV is not strong, policy changes that may bring reduction in the number of firms enable survived producers with high productivity to expand production to be large-scale mass producers fully enjoying the fruit of economies of scale; and (3) When the strength of the importer's PfV is changed from zero to unity, there is the value that totally changes simulation results and their interpretations.

Partition, independence, and population geography in Bengal

This study quantitatively explores the changing population geography in Bengal, with a particular focus on Partition in India in 1947 and Independence of Bangladesh in 1971. Based on decadal census data from 1901 to 2001 at the district level, this paper explores how trends in regional population growth evolved with such historical events. Following Redding and Sturm (2008), Differences-in-Differences estimation is also employed. Estimation results show that there were different shocks on both sides and from both events. In West Bengal, the change in the regional population trends occurred in 1947 and remained similar thereafter. On the other hand, in East Bengal, the population growth became statistically significant after 1971. Further robustness checks show that the impacts were not uniform with respect to the distance from the border. Overall analyses show that the emergence of the international border in Bengal had asymmetric impacts on both sides.

Numerical simulation of the upward propagation of a flame in a vertical tube filled with a very lean mixture.

Upwardpropagation of a premixed flame in averticaltubefilled with a very leanmixture is simulated numerically using a single irreversible Arrhenius reaction model with infinitely high activation energy. In the absence of heat losses and preferential diffusion effects, a curved flame with stationary shape and velocity close to those of an open bubble ascending in the same tube is found for values of the fuel mass fraction above a certain minimum that increases with the radius of the tube, while the numerical computations cease to converge to a stationary solution below this minimum mass fraction. The vortical flow of the gas behind the flame and in its transport region is described for tubes of different radii. It is argued that this flow may become unstable when the fuel mass fraction is decreased, and that this instability, together with the flame stretch due to the strong curvature of the flame tip in narrow tubes, may be responsible for the minimum fuel mass fraction. Radiation losses and a Lewis number of the fuel slightly above unity decrease the final combustion temperature at the flame tip and increase the minimum fuel mass fraction, while a Lewis number slightly below unity has the opposite effect.

Identification of logically related heap regions

This paper introduces a novel technique for identifying logically related sections of the heap such as recursive data structures, objects that are part of the same multi-component structure, and related groups of objects stored in the same collection/array. When combined withthe lifetime properties of these structures, this information can be used to drive a range of program optimizations including pool allocation, object co-location, static deallocation, and region-based garbage collection. The technique outlined in this paper also improves the efficiency of the static analysis by providing a normal form for the abstract models (speeding the convergence of the static analysis). We focus on two techniques for grouping parts of the heap. The first is a technique for precisely identifying recursive data structures in object-oriented programs based on the types declared in the program. The second technique is a novel method for grouping objects that make up the same composite structure and that allows us to partition the objects stored in a collection/array into groups based on a similarity relation. We provide a parametric component in the similarity relation in order to support specific analysis applications (such as a numeric analysis which would need to partition the objects based on numeric properties of the fields). Using the Barnes-Hut benchmark from the JOlden suite we show how these grouping methods can be used to identify various types of logical structures allowing the application of many region-based program optimizations.

Estudio de la fisuración de paneles sándwich de yeso laminado y alma de lana de roca = Study of the cracking of sandwich panels of plasterboard and rockwool

Este artículo presenta el estudio de la rotura de paneles sándwich de yeso laminado y lana de roca bajo solicitaciones de flexo-tracción dentro de su plano. Estos paneles se emplean para conformar tabiques interiores de edificación y con frecuencia se fisuran por flechas excesivas en los forjados. Actualmente no hay modelos de cálculo fiables ni datos experimentales que permitan estudiar este problema. Este trabajo presenta los resultados de una campaña experimental encaminada a caracterizar el comportamiento en rotura de los paneles sándwich y de sus componentes individuales. Además, se presenta un modelo cohesivo con fisura embebida que permite simular el comportamiento en rotura del panel sándwich conjunto. Por último se presentan los resultados de los ensayos de fractura en modo mixto (tracción/cortante) de paneles comerciales y se reproduce su comportamiento con el modelo cohesivo propuesto, obteniéndose un buen ajuste. This paper presents the study of plasterboard and rockwool sandwich panels cracking under flexural loading. These panels are usually used to perform interior partition walls and they frequently show cracking pathology due to excessive deflexion of the slabs. There are currently no reliable simulation models and experimental data for the study of this problem. This paper presents the results of an experimental campaign aimed to characterize the fracture behaviour of sandwich panels and their individual components. In addition, the paper presents a cohesive model with embedded crack to simulate the fracture behaviour of the panel. Finally we present the results of tests for mixed mode fracture (tensile / shear) commercial panels and their behaviour is reproduced with the cohesive model proposed, yielding a good fit.

Influence of delay time on regularity estimation for voice pathology detection

The employment of nonlinear analysis techniques for automatic voice pathology detection systems has gained popularity due to the ability of such techniques for dealing with the underlying nonlinear phenomena. On this respect, characterization using nonlinear analysis typically employs the classical Correlation Dimension and the largest Lyapunov Exponent, as well as some regularity quantifiers computing the system predictability. Mostly, regularity features highly depend on a correct choosing of some parameters. One of those, the delay time �, is usually fixed to be 1. Nonetheless, it has been stated that a unity � can not avoid linear correlation of the time series and hence, may not correctly capture system nonlinearities. Therefore, present work studies the influence of the � parameter on the estimation of regularity features. Three � estimations are considered: the baseline value 1; a � based on the Average Automutual Information criterion; and � chosen from the embedding window. Testing results obtained for pathological voice suggest that an improved accuracy might be obtained by using a � value different from 1, as it accounts for the underlying nonlinearities of the voice signal.

Time and space partition platform for safe and secure flight software.

There are a number of research and development activities that are exploring Time and Space Partition (TSP) to implement safe and secure flight software. This approach allows to execute different real-time applications with different levels of criticality in the same computer board. In order to do that, flight applications must be isolated from each other in the temporal and spatial domains. This paper presents the first results of a partitioning platform based on the Open Ravenscar Kernel (ORK+) and the XtratuM hypervisor. ORK+ is a small, reliable real-time kernel supporting the Ada Ravenscar Computational model that is central to the ASSERT development process. XtratuM supports multiple virtual machines, i.e. partitions, on a single computer and is being used in the Integrated Modular Avionics for Space study. ORK+ executes in an XtratuM partition enabling Ada applications to share the computer board with other applications.

Ion charge number and flux saturation effects in the corona of a laser-irradiated pellet

The quasisteady structure of the corona of a laser-irradiated pellet is completely determined for arbitrary Z, (ion charge number} and re/ra (ratio of critical and ablation radii), and for heat-flux saturation factor/above approximately 0.04. The ion-to-electron temperature ratio at rc grows sensibly with Z,; all other quantities depend weakly and nonmonotonically on Z,. For rc /ra close to unity, and all Z, of interest (Z, < 47}, the flow is subsonic at rc. For a given laser power W, flux saturation may decrease (low/) or increase (high/) the ablation pressure Pa relative to the value obtained when saturation is not considered; in some cases a decrease in/with W fixed increases Pa. For intermediate^ ~0.1), Pa cc (W/r* )2/3 p\n\pc = critical density), independently of rc/ra; for/~0.6, Pa «s larger by a factor of about [rc/raf13. For rjra > 1.2 roughly, the mass ablation rate is C{Z,) [{m/kZ.f^Kr^Pl) l,\ independent of pc and/, and barely dependent on Z,(m, is ion mass; k, Boltzmann's constant; K, conductivity coefficient; and C, a tabulated function).

Zone design of specific sizes using adaptive additively weighted voronoi diagrams

Territory or zone design processes entail partitioning a geographic space, organized as a set of areal units, into different regions or zones according to a specific set of criteria that are dependent on the application context. In most cases, the aim is to create zones of approximately equal sizes (zones with equal numbers of inhabitants, same average sales, etc.). However, some of the new applications that have emerged, particularly in the context of sustainable development policies, are aimed at defining zones of a predetermined, though not necessarily similar, size. In addition, the zones should be built around a given set of seeds. This type of partitioning has not been sufficiently researched; therefore, there are no known approaches for automated zone delimitation. This study proposes a new method based on a discrete version of the adaptive additively weighted Voronoi diagram that makes it possible to partition a two-dimensional space into zones of specific sizes, taking both the position and the weight of each seed into account. The method consists of repeatedly solving a traditional additively weighted Voronoi diagram, so that each seed?s weight is updated at every iteration. The zones are geographically connected using a metric based on the shortest path. Tests conducted on the extensive farming system of three municipalities in Castile-La Mancha (Spain) have established that the proposed heuristic procedure is valid for solving this type of partitioning problem. Nevertheless, these tests confirmed that the given seed position determines the spatial configuration the method must solve and this may have a great impact on the resulting partition.

Performance of bare-tether systems under varying magnetic and plasma conditions

Electrodynamic tethered systems, in which an exposed portion of the conducting tether itself collects electrons from the ionosphere, promise to attain currents of 10 A or more in low Earth orbit. For the first time, another desirable feature of such bare-tether systems is reported and analyzed in detail: Collection by a bare tether is relatively insensitive to variations in electron density that are regularly encountered on each revolution of an orbit. This self-adjusting property of bare-tether systems occurs because the electron-collecting area on the tether is not fixed, but extends along its positively biased portion, and because the current varies as collecting length to a power greater than unity. How this adjustment to density variations follows from the basic collection law of thin cylinders is shown. The effect of variations in the motionally induced tether voltage is also analyzed. Both power and thruster modes are considered. The performance of bare-tether systems to tethered systems is compared using passive spherical collectors of fixed area, taking into consideration recent experimental results. Calculations taking into account motional voltage and plasma density around a realistic orbit for bare-tether systems suitable for space station applications are also presented.

Finite element simulation of sandwich panels of laminated plaster and rockwool under mixed mode fracture

Sandwich panels of laminated gypsum and rock wool have shown large pathology of cracking due to excessive slabs deflection. Currently the most widespread use of this material is as vertical elements of division or partition, with no structural function, what justifies that there are no studies on the mechanism of fracture and mechanical properties related to it. Therefore, and in order to reduce the cracking problem, it is necessary to progress in the simulation and prediction of the behaviour under tensile and shear load of such panels, although in typical applications have no structural responsability.