Industrial Development and the Innovation System of the Ethanol Sector in Brazil

The purpose of this paper is to analyze innovations and the innovation system and its dynamics in the ethanol sector in the State of Sao Paulo. More specifically, this paper focuses on the development process in the sector, the public policies taken to promote the sector, and the organizations and key players involved in these policies and their responses to unforeseeable changes in economic, social and technological environments. To this end, this paper takes an historical perspective and reviews data on the cultivation of sugar cane, the production of ethanol, and on sugar cane yields as indicators of the innovations achieved in the sector. The geographical distribution of these indicators is also examined. Next, several cases in Piracicaba and Campinas in the State of Sao Paulo are presented; these give us a more concrete idea of the processes involved in innovation and technology transfer. Based on these observations, the ethanol cluster and the innovation system of the State of Sao Paulo are discussed from the viewpoint of the flowchart approach to industrial cluster policy.

Time-resolved evolution of coherent structures in turbulent channels

El objetivo de esta tesis es estudiar la dinámica de la capa logarítmica de flujos turbulentos de pared. En concreto, proponemos un nuevo modelo estructural utilizando diferentes tipos de estructuras coherentes: sweeps, eyecciones, grupos de vorticidad y streaks. La herramienta utilizada es la simulación numérica directa de canales turbulentos. Desde los primeros trabajos de Theodorsen (1952), las estructuras coherentes han jugado un papel fundamental para entender la organización y dinámica de los flujos turbulentos. A día de hoy, datos procedentes de simulaciones numéricas directas obtenidas en instantes no contiguos permiten estudiar las propiedades fundamentales de las estructuras coherentes tridimensionales desde un punto de vista estadístico. Sin embargo, la dinámica no puede ser entendida en detalle utilizando sólo instantes aislados en el tiempo, sino que es necesario seguir de forma continua las estructuras. Aunque existen algunos estudios sobre la evolución temporal de las estructuras más pequeñas a números de Reynolds moderados, por ejemplo Robinson (1991), todavía no se ha realizado un estudio completo a altos números de Reynolds y para todas las escalas presentes de la capa logarítmica. El objetivo de esta tesis es llevar a cabo dicho análisis. Los problemas más interesantes los encontramos en la región logarítmica, donde residen las cascadas de vorticidad, energía y momento. Existen varios modelos que intentan explicar la organización de los flujos turbulentos en dicha región. Uno de los más extendidos fue propuesto por Adrian et al. (2000) a través de observaciones experimentales y considerando como elemento fundamental paquetes de vórtices con forma de horquilla que actúan de forma cooperativa para generar rampas de bajo momento. Un modelo alternativo fué ideado por del Álamo & Jiménez (2006) utilizando datos numéricos. Basado también en grupos de vorticidad, planteaba un escenario mucho más desorganizado y con estructuras sin forma de horquilla. Aunque los dos modelos son cinemáticamente similares, no lo son desde el punto de vista dinámico, en concreto en lo que se refiere a la importancia que juega la pared en la creación y vida de las estructuras. Otro punto importante aún sin resolver se refiere al modelo de cascada turbulenta propuesto por Kolmogorov (1941b), y su relación con estructuras coherentes medibles en el flujo. Para dar respuesta a las preguntas anteriores, hemos desarrollado un nuevo método que permite seguir estructuras coherentes en el tiempo y lo hemos aplicado a simulaciones numéricas de canales turbulentos con números de Reynolds lo suficientemente altos como para tener un rango de escalas no trivial y con dominios computacionales lo suficientemente grandes como para representar de forma correcta la dinámica de la capa logarítmica. Nuestros esfuerzos se han desarrollado en cuatro pasos. En primer lugar, hemos realizado una campaña de simulaciones numéricas directas a diferentes números de Reynolds y tamaños de cajas para evaluar el efecto del dominio computacional en las estadísticas de primer orden y el espectro. A partir de los resultados obtenidos, hemos concluido que simulaciones con cajas de longitud 2vr y ancho vr veces la semi-altura del canal son lo suficientemente grandes para reproducir correctamente las interacciones entre estructuras coherentes de la capa logarítmica y el resto de escalas. Estas simulaciones son utilizadas como punto de partida en los siguientes análisis. En segundo lugar, las estructuras coherentes correspondientes a regiones con esfuerzos de Reynolds tangenciales intensos (Qs) en un canal turbulento han sido estudiadas extendiendo a tres dimensiones el análisis de cuadrantes, con especial énfasis en la capa logarítmica y la región exterior. Las estructuras coherentes han sido identificadas como regiones contiguas del espacio donde los esfuerzos de Reynolds tangenciales son más intensos que un cierto nivel. Los resultados muestran que los Qs separados de la pared están orientados de forma isótropa y su contribución neta al esfuerzo de Reynolds medio es nula. La mayor contribución la realiza una familia de estructuras de mayor tamaño y autosemejantes cuya parte inferior está muy cerca de la pared (ligada a la pared), con una geometría compleja y dimensión fractal « 2. Estas estructuras tienen una forma similar a una ‘esponja de placas’, en comparación con los grupos de vorticidad que tienen forma de ‘esponja de cuerdas’. Aunque el número de objetos decae al alejarnos de la pared, la fracción de esfuerzos de Reynolds que contienen es independiente de su altura, y gran parte reside en unas pocas estructuras que se extienden más allá del centro del canal, como en las grandes estructuras propuestas por otros autores. Las estructuras dominantes en la capa logarítmica son parejas de sweeps y eyecciones uno al lado del otro y con grupos de vorticidad asociados que comparten las dimensiones y esfuerzos con los remolinos ligados a la pared propuestos por Townsend. En tercer lugar, hemos estudiado la evolución temporal de Qs y grupos de vorticidad usando las simulaciones numéricas directas presentadas anteriormente hasta números de Reynolds ReT = 4200 (Reynolds de fricción). Las estructuras fueron identificadas siguiendo el proceso descrito en el párrafo anterior y después seguidas en el tiempo. A través de la interseción geométrica de estructuras pertenecientes a instantes de tiempo contiguos, hemos creado gratos de conexiones temporales entre todos los objetos y, a partir de ahí, definido ramas primarias y secundarias, de tal forma que cada rama representa la evolución temporal de una estructura coherente. Una vez que las evoluciones están adecuadamente organizadas, proporcionan toda la información necesaria para caracterizar la historia de las estructuras desde su nacimiento hasta su muerte. Los resultados muestran que las estructuras nacen a todas las distancias de la pared, pero con mayor probabilidad cerca de ella, donde la cortadura es más intensa. La mayoría mantienen tamaños pequeños y no viven mucho tiempo, sin embargo, existe una familia de estructuras que crecen lo suficiente como para ligarse a la pared y extenderse a lo largo de la capa logarítmica convirtiéndose en las estructuras observas anteriormente y descritas por Townsend. Estas estructuras son geométricamente autosemejantes con tiempos de vida proporcionales a su tamaño. La mayoría alcanzan tamaños por encima de la escala de Corrsin, y por ello, su dinámica está controlada por la cortadura media. Los resultados también muestran que las eyecciones se alejan de la pared con velocidad media uT (velocidad de fricción) y su base se liga a la pared muy rápidamente al inicio de sus vidas. Por el contrario, los sweeps se mueven hacia la pared con velocidad -uT y se ligan a ella más tarde. En ambos casos, los objetos permanecen ligados a la pared durante 2/3 de sus vidas. En la dirección de la corriente, las estructuras se desplazan a velocidades cercanas a la convección media del flujo y son deformadas por la cortadura. Finalmente, hemos interpretado la cascada turbulenta, no sólo como una forma conceptual de organizar el flujo, sino como un proceso físico en el cual las estructuras coherentes se unen y se rompen. El volumen de una estructura cambia de forma suave, cuando no se une ni rompe, o lo hace de forma repentina en caso contrario. Los procesos de unión y rotura pueden entenderse como una cascada directa (roturas) o inversa (uniones), siguiendo el concepto de cascada de remolinos ideado por Richardson (1920) y Obukhov (1941). El análisis de los datos muestra que las estructuras con tamaños menores a 30η (unidades de Kolmogorov) nunca se unen ni rompen, es decir, no experimentan el proceso de cascada. Por el contrario, aquellas mayores a 100η siempre se rompen o unen al menos una vez en su vida. En estos casos, el volumen total ganado y perdido es una fracción importante del volumen medio de la estructura implicada, con una tendencia ligeramente mayor a romperse (cascada directa) que a unirse (cascade inversa). La mayor parte de interacciones entre ramas se debe a roturas o uniones de fragmentos muy pequeños en la escala de Kolmogorov con estructuras más grandes, aunque el efecto de fragmentos de mayor tamaño no es despreciable. También hemos encontrado que las roturas tienen a ocurrir al final de la vida de la estructura y las uniones al principio. Aunque los resultados para la cascada directa e inversa no son idénticos, son muy simétricos, lo que sugiere un alto grado de reversibilidad en el proceso de cascada. ABSTRACT The purpose of the present thesis is to study the dynamics of the logarithmic layer of wall-bounded turbulent flows. Specifically, to propose a new structural model based on four different coherent structures: sweeps, ejections, clusters of vortices and velocity streaks. The tool used is the direct numerical simulation of time-resolved turbulent channels. Since the first work by Theodorsen (1952), coherent structures have played an important role in the understanding of turbulence organization and its dynamics. Nowadays, data from individual snapshots of direct numerical simulations allow to study the threedimensional statistical properties of those objects, but their dynamics can only be fully understood by tracking them in time. Although the temporal evolution has already been studied for small structures at moderate Reynolds numbers, e.g., Robinson (1991), a temporal analysis of three-dimensional structures spanning from the smallest to the largest scales across the logarithmic layer has yet to be performed and is the goal of the present thesis. The most interesting problems lie in the logarithmic region, which is the seat of cascades of vorticity, energy, and momentum. Different models involving coherent structures have been proposed to represent the organization of wall-bounded turbulent flows in the logarithmic layer. One of the most extended ones was conceived by Adrian et al. (2000) and built on packets of hairpins that grow from the wall and work cooperatively to gen- ´ erate low-momentum ramps. A different view was presented by del Alamo & Jim´enez (2006), who extracted coherent vortical structures from DNSs and proposed a less organized scenario. Although the two models are kinematically fairly similar, they have important dynamical differences, mostly regarding the relevance of the wall. Another open question is whether such a model can be used to explain the cascade process proposed by Kolmogorov (1941b) in terms of coherent structures. The challenge would be to identify coherent structures undergoing a turbulent cascade that can be quantified. To gain a better insight into the previous questions, we have developed a novel method to track coherent structures in time, and used it to characterize the temporal evolutions of eddies in turbulent channels with Reynolds numbers high enough to include a non-trivial range of length scales, and computational domains sufficiently long and wide to reproduce correctly the dynamics of the logarithmic layer. Our efforts have followed four steps. First, we have conducted a campaign of direct numerical simulations of turbulent channels at different Reynolds numbers and box sizes, and assessed the effect of the computational domain in the one-point statistics and spectra. From the results, we have concluded that computational domains with streamwise and spanwise sizes 2vr and vr times the half-height of the channel, respectively, are large enough to accurately capture the dynamical interactions between structures in the logarithmic layer and the rest of the scales. These simulations are used in the subsequent chapters. Second, the three-dimensional structures of intense tangential Reynolds stress in plane turbulent channels (Qs) have been studied by extending the classical quadrant analysis to three dimensions, with emphasis on the logarithmic and outer layers. The eddies are identified as connected regions of intense tangential Reynolds stress. Qs are then classified according to their streamwise and wall-normal fluctuating velocities as inward interactions, outward interactions, sweeps and ejections. It is found that wall-detached Qs are isotropically oriented background stress fluctuations, common to most turbulent flows, and do not contribute to the mean stress. Most of the stress is carried by a selfsimilar family of larger wall-attached Qs, increasingly complex away from the wall, with fractal dimensions « 2. They have shapes similar to ‘sponges of flakes’, while vortex clusters resemble ‘sponges of strings’. Although their number decays away from the wall, the fraction of the stress that they carry is independent of their heights, and a substantial part resides in a few objects extending beyond the centerline, reminiscent of the very large scale motions of several authors. The predominant logarithmic-layer structures are sideby- side pairs of sweeps and ejections, with an associated vortex cluster, and dimensions and stresses similar to Townsend’s conjectured wall-attached eddies. Third, the temporal evolution of Qs and vortex clusters are studied using time-resolved DNS data up to ReT = 4200 (friction Reynolds number). The eddies are identified following the procedure presented above, and then tracked in time. From the geometric intersection of structures in consecutive fields, we have built temporal connection graphs of all the objects, and defined main and secondary branches in a way that each branch represents the temporal evolution of one coherent structure. Once these evolutions are properly organized, they provide the necessary information to characterize eddies from birth to death. The results show that the eddies are born at all distances from the wall, although with higher probability near it, where the shear is strongest. Most of them stay small and do not last for long times. However, there is a family of eddies that become large enough to attach to the wall while they reach into the logarithmic layer, and become the wall-attached structures previously observed in instantaneous flow fields. They are geometrically self-similar, with sizes and lifetimes proportional to their distance from the wall. Most of them achieve lengths well above the Corrsin’ scale, and hence, their dynamics are controlled by the mean shear. Eddies associated with ejections move away from the wall with an average velocity uT (friction velocity), and their base attaches very fast at the beginning of their lives. Conversely, sweeps move towards the wall at -uT, and attach later. In both cases, they remain attached for 2/3 of their lives. In the streamwise direction, eddies are advected and deformed by the local mean velocity. Finally, we interpret the turbulent cascade not only as a way to conceptualize the flow, but as an actual physical process in which coherent structures merge and split. The volume of an eddy can change either smoothly, when they are not merging or splitting, or through sudden changes. The processes of merging and splitting can be thought of as a direct (when splitting) or an inverse (when merging) cascade, following the ideas envisioned by Richardson (1920) and Obukhov (1941). It is observed that there is a minimum length of 30η (Kolmogorov units) above which mergers and splits begin to be important. Moreover, all eddies above 100η split and merge at least once in their lives. In those cases, the total volume gained and lost is a substantial fraction of the average volume of the structure involved, with slightly more splits (direct cascade) than mergers. Most branch interactions are found to be the shedding or absorption of Kolmogorov-scale fragments by larger structures, but more balanced splits or mergers spanning a wide range of scales are also found to be important. The results show that splits are more probable at the end of the life of the eddy, while mergers take place at the beginning of the life. Although the results for the direct and the inverse cascades are not identical, they are found to be very symmetric, which suggests a high degree of reversibility of the cascade process.

A proposal for a Business Framework targeted at emerging business services and applications

Un Service Business Framework consiste en una serie de componentes interrelacionados que permiten la gestión de servicios de negocio a través de su ciclo de vida, desde su creación, descubrimiento y comparación, hasta su monetización (incluyendo un posible reparto de beneficios). De esta manera, el denominado FIWARE Business Framework trata de permitir a los usuarios de la plataforma FIWARE mejorar sus productos con funcionalidades de búsqueda, describrimiento, comparación, monetización y reparto de beneficios. Para lograr este objetivo, el Business Framework de FIWARE proporciona la especificación abierta y las APIs de una serie de components (denominados \Generic Enablers" en terminología FIWARE), junto con una implementación de referencia de las mismas pueden ser facilmente integradas en los sitemas existentes para conseguir aplicaciones con valor a~nadido. Al comienzo de este trabajo de fin de master, el Business Framework de FIWARE no era lo suficientemente maduro como para cubrir los requisitos de sus usuarios, ya que ofrecía modelos demasiado generales y dejaba algunas funcionalidades clave para ser implementadas por los usuarios. Para solucionar estos problemas, el principal objectivo desarrollado en el contexto de este trabajo de fin de master ha consistido en mejorar y evolucionar el Business Framework de FIWARE para dar respuesta a las demandas de sus usuarios. Para alcanzar el pricipal objetivo propuesto, el Business Framework de FIWARE ha sido evaluado usando la información proporcionada por los usuarios de la plataforma, principalmente PyMEs y start-ups que usan este framework en sus soluciones, con el objetivo de obtener una lista de requisitos y de dise~nar a partir de éstos un roadmap de evolución a 6 meses. Después, los diferentes problemas identificados se han tratado uno por uno dando en cada caso una solución capaz de cubrir los requisitos de los usuarios. Finalmente, se han evaluado los resultados obtenidos en el proyecto integrando el Business Framework desarrollado con un sistema existente para la gestión de datos de consusmo energético, construyendo lo que se ha denominado Mercado de Datos de Consumo Energético. Esto además ha permitido demostrar la utilidad del framework propuesto para evolucionar una plataforma de datos abiertos bien conocida como es CKAN a un verdadero mercado de datos.---ABSTRACT---Service Business Frameworks consist on a number of interrelated components that support the management of business services across their whole lifecycle, from their creation, publication, discovery and comparison, to their monetization (possibly including revenue settlement and sharing). In this regard, the FIWARE Business Framework aims at allowing FIWARE users to enhance their solutions with search, discovery, comparison, monetization and revenue settlement and sharing features. To achieve this objective, the FIWARE Business Framework provides the open specification and APIs of a comprehensive set of components (called Generic Enablers in FIWARE terminology), along with a reference implementation of these APIs,, that can be easily integrated with existing systems in order to create value added applications. At the beginning of the current Master's Thesis, the FIWARE Business Framework was not mature enough to cover the requirements of the its users, since it provided too general models and leaved some key functionality to be implemented by those users. To deal with these issues, the main objective carried out in the context of this Master's Thesis have been enhancing and evolving the FIWARE Business Framework to accomplish with the demands of its users. For achieving the main objective of this Master's Thesis, the FWARE Business Framework has been evaluated using the feedback provided by FIWARE users, mainly SMEs and start-ups, actually using the framework in their solutions, in order to determine a list of requirements and to design a roadmap for the evolution and improvement of the existing framework in the next 6 months. Then, the diferent issues detected have been tackle one by one enhancing them, and trying to give a solution able to cover users requirements. Finally, the results of the project have been evaluated by integrating the evolved FIWARE Business Framework with an existing system in charge of the management of energy consumption data, building what has been called the Energy Consumption Data Market. This has also allowed demonstrating the usefulness of the proposed business framework to evolve CKAN, a renowned open data platform, into an actual, fully- edged data market.

Accessing and managing open medical resources in Africa over the Internet

Recent commentaries have proposed the advantages of using open exchange of data and informatics resources for improving health-related policies and patient care in Africa. Yet, in many African regions, both private medical and public health information systems are still unaffordable. Open exchange over the social Web 2.0 could encourage more altruistic support of medical initiatives. We have carried out some experiments to demonstrate the feasibility of using this approach to disseminate open data and informatics resources in Africa. After the experiments we developed the AFRICA BUILD Portal, the first Social Network for African biomedical researchers. Through the AFRICA BUILD Portal users can access in a transparent way to several resources. Currently, over 600 researchers are using distributed and open resources through this platform committed to low connections.

Elementos peatonales de las ciudades medias españolas : tipos, orígenes, relaciones y articulaciones

A través de esta tesis se busca aportar un análisis de los elementos peatonales que cubren las necesidades y las infraestructuras de apoyo al peatón, siendo un campo poco desarrollado en nuestro país a diferencia de otros como Dinamarca, Reino Unido, Alemania y Holanda, donde las actuaciones peatonales ejecutadas son tradicionales y muy exitosas. Se trata por tanto de un tema poco estudiado pero que adquiere singular importancia en estos años de búsqueda de nuevos modelos urbanos que eviten el derroche de recursos, y avancen hacia formas de movilidad más adecuadas a un mundo limitado y vulnerable. La investigación tiene un carácter eminentemente descriptivo cuyo principal valor es documentar y analizar sistemáticamente una realidad poco conocida, aportándose datos para entender el origen y desarrollo de las actuaciones peatonales. El propósito es ayudar a cimentar este campo en nuestro país, definiendo con precisión el estado de la cuestión geográficamente y dejando para un futuro una cartografía temática completa. El objeto general es estudiar y comprender los elementos peatonales de un número limitado de ciudades medias españolas, marcándose como objetivos específicos los siguientes: - Identificar y describir los principales elementos que conforman la red peatonal de las ciudades. ‐ Estudiar las tipologías espaciales dominantes, sus características y orígenes, pudiendo distinguir de un lado, las desarrolladas en la ciudad consolidada, como las actuaciones en los cascos antiguos; y por otro, las ejecutadas en la ciudad nueva a través de fórmulas arquitectónicas generalmente residenciales con espacios peatonales adjuntos. ‐ Analizar los referidos elementos para comprobar si han conformado redes de uso peatonal, si se han constituido articulando la ciudad como en el caso de los ejes lineales en las ciudades con río o mar, o si han influenciado el carácter del entorno en el que se han realizado, centrando el interés en los cascos históricos peatonalizados. ‐ Comprobar si hay actuaciones complementarias a los procesos de urbanización y mejora urbanística, así como la aprobación de ayudas y subvenciones para afrontar las mismas. ‐ Finalmente, describir y evaluar los procesos y procedimientos mediante los que se produce la peatonalización de determinadas áreas urbanas, los orígenes, los instrumentos y fechas de su puesta en marcha, aportando una cronología peatonal. La metodología comienza con la acotación de 22 ciudades españolas, capitales de provincia con una población entre 100.000 y 500.000 habitantes según los datos del INE del año 2009. La distribución es equilibrada con la selección de ciudades de costa, de interior, con río/ría, con carácter patrimonial, ciudades en islas, etc. El análisis de los elementos peatonales de estas urbes se realiza gracias a la gran resolución de las bases cartográficas públicas y privadas que hay en la actualidad en internet, especialmente con el uso de las herramientas de Google Earth y Google Maps en su versión “street view”, softwares que permiten un paseo virtual de cada ciudad detallándose con gran precisión las actuaciones peatonales. Las ciudades elegidas son: ‐ 11 ciudades costeras: Alicante, Almería, Bilbao, Cádiz, Castellón de la Plana, Huelva, Las Palmas de Gran Canaria, Palma de Mallorca, Santander, San Sebastián y Tarragona. ‐ 11 ciudades de interior: Albacete, Burgos, Córdoba, León, Lérida, Logroño, Oviedo, Murcia, Pamplona, Valladolid y Vitoria. Finalmente, por tener los porcentajes mas elevados de las áreas peatonales de sus casco histórico, se eligen 3 casos de ciudades representativas para un desarrollo peatonal en profundidad, seleccionándose Burgos, San Sebastián y Pamplona. Otros aspectos metodológicos interesantes a destacar, es la extensa documentación adquirida a través de las fuentes de Internet, sobre todo a la hora de desarrollar el último capítulo “Procesos de peatonalización de las ciudades españolas” centrado en las 3 ciudades elegidas. Se consulta las hemerotecas de periódicos locales, los boletines oficiales, las actas de los plenos de los Ayuntamientos y los documentos de planificación (Planes Generales, Planes Especiales, Planes y Proyectos Municipales, Planes de Movilidad), adquiriéndose una precisa información en cuanto a la cronología de las fechas y extensión del trabajo. Se complementa la metodología con las entrevistas a actores claves en el proceso peatonal, como el personal técnico de los Ayuntamiento y los técnicos redactores de los proyectos; y con la colaboración directa de los técnicos de los consistorios de las 3 ciudades seleccionadas, aportando todo tipo de información demandada. En la tesis, se introduce los elementos peatonales mediante el estudio de los espacios peatonales y los procesos de peatonalización existentes, a través del análisis de la literatura consultada aportándose información valiosa en cuanto a la definición de los modelos peatonales, exponiéndose una breve historia de las peatonalizaciones. Destacan las publicaciones de los expertos europeos en la materia como los autores Carmen Hass-Klau, Rolf Monheim, Rob Krier y Collin Buchanan. En España, las actuaciones peatonales fueron tardías en el tiempo en comparación con el resto de Europa, con casi 40 años de retraso. Las referencias bibliográficas españolas en esta materia son escasas siendo las mas significativas las realizadas por Alfonso Sanz y por el profesor Julio Pozueta destacando una de sus últimas publicaciones “La ciudad paseable” describiéndose los elementos peatonales existentes en las ciudades, sirviendo como modelo y ejemplo para esta investigación. En base a lo anterior, se definen los elementos peatonales como aquellos espacios públicos libres de edificación que, por sus características y diseño, garantizan un confortable uso estancial, de tránsito peatonal y están expresamente reservados para ello. En la tesis se detectan y se especifican los siguientes elementos peatonales: las calles y plazas peatonales, las aceras y bulevares de una anchura superior a 8 metros, los paseos peatonales, los elementos de paso (tradicionales y mecánicos), espacios peatonales ligados a nuevas áreas residenciales, los soportales y pasajes peatonales con una anchura mínima de 4 metros, recintos feriales, espacios libres y zonas verdes y parques. Para cada una de las 22 ciudades seleccionadas se realiza un exhaustivo inventario de los anteriores elementos a través de fichas, aportando un gran número de proyectos individuales ejecutados en cada urbe. Esta información se recoge gráficamente en 2 fotoplanos, conformándose como herramientas fundamentales para esta investigación. El Fotoplano 1 se hace sobre la base de la ciudad del Google Earth diferenciándose las áreas peatonales y las zonas verdes. En el Fotoplano 2, y con el soporte anterior, se distinguen las tipologías persistentes y dominantes como son los grandes ejes peatonales, las redes peatonales locales y los elementos peatonales singulares. Finalmente, a partir de los 2 fotoplanos, se realiza la denominada “Huella peatonal” que destaca por su atractivo y pregnancia, algo de lo que el campo de lo peatonal es muy útil. A través de la huella se obtiene una rápida información al tener el plano dos colores, color naranja para lo peatonal (formado por las áreas peatonales y zonas verdes) y color negro para el resto el resto no peatonal. Toda esta documentación gráfica y descriptiva de los elementos peatonales de cada ciudad, queda ampliamente recogida en el Anexo de la tesis. La “Huella peatonal” se considera como el plano básico en la investigación obteniendo una percepción rápida, clara y visual del espacio peatonal de cada ciudad. Se arroja información morfológica con respecto a la distribución espacial, articulación, equilibrio, modulación, cohesión, concentración peatonal, etc. de cada una de las ciudades seleccionadas. A través de la huella se resuelve muchos de las cuestiones enmarcadas como objetivos de la tesis, comprobándose de forma general, que los elementos peatonales dentro de la trama urbana están desarticulados ya que no hay una estructura que module la ciudad como un conjunto cohesionado. Se localizan pequeñas redes conectadas entre sí, que de forma heterogénea, están dispersas por la ciudad. Se verifica que los elementos peatonales con mayor concentración y presencia en las ciudades analizadas son los ejes peatonales, los cascos históricos y los elementos peatonales en las nuevas áreas residenciales. En la investigación, además de estos 3 elementos mencionados, se analiza con mayor profundidad otros tipos que destacan por su persistencia y repetición en la “Huella peatonal” de cada una de las 22 ciudades, como son las plazas peatonales, los soportales y los elementos singulares peatonales: espacios tradicionales (recintos feriales, pasajes, puentes históricos), nuevos elementos peatonales (pasarelas peatonales, elementos mecánicos de paso), áreas peatonales entorno a edificios culturales y otros casos como los consistentes en la recuperación y transformación de edificaciones y construcciones urbanas de diferente uso y tipología, en nuevas áreas peatonales. Se aporta luz sobre su definición, localización, cronología, proporción, presencia y génesis, facilitando resultados de cada uno de ellos. De forma paralela, se obtiene información de índole cuantitativa a través de las mediciones de la huella, obteniéndose datos y porcentajes de extensión de la ciudad, de las zonas peatonales y de las zonas verdes, de los cascos históricos y de sus superficies peatonales, de los metros lineales de dichos cascos históricos y de sus calles peatonales. Se proporcionan ratios e índices que se consideran fundamentales para una mejor comprensión peatonal de cada urbe. Se establece una clasificación de las ciudades en cada uno de los ámbitos descritos, destacando las ciudades de Pamplona, San Sebastián y Burgos por arrojar las cifras peatonales más positivas encabezando la mayoría de las tablas clasificatorias. La peor ciudad valorada es Alicante, seguida según criterio, de Almería, Palma de Mallorca y Las Palmas de GC. En el capítulo final de la investigación, se eligen las ciudades de Burgos, San Sebastián y Pamplona como casos de estudio representativos. El objetivo es obtener un conocimiento más preciso en cuanto a su origen, cronología y procesos de las peatonalizaciones. Cada ciudad se compone de un cuadro cronológicos por etapas, desarrollándose de forma exhaustiva cada una de ellas, enunciadas normalmente, como instrumentos de planeamiento o proyectos de urbanización, acompañadas de los planos de las actuaciones peatonales. Al final de cada etapa se aportan datos de las cifras de las peatonalizaciones que se van realizando, con un cuadro numérico de localizaciones, superficie peatonal, superficie reurbanizada, longitud peatonal y el grado de peatonalización del casco histórico, además de los datos acumulados por etapa. De las conclusiones cruzadas de estas 3 ciudades, destaca la comprobación de la tendencia de ir peatonalizando los centros antiguos llegando incluso al 100% de calles peatonales en el caso de San Sebastián. No obstante, es difícil confirmar si el objetivo es una peatonalización global de los cascos, ya que son muchas las variables que afectan e influyen en el proceso peatonal de cada ciudad. Se coteja adicionalmente cómo se extiende la cultura peatonal desde el interior al exterior, mas allá de los cascos históricos hacia los ensanches próximos. En cuanto al origen de las peatonalizaciones, se concluye que no hay una concepción inicial y teórica marcada, a partir de la cual se va desarrollando la trama peatonal de cada ciudad. Se puede afirmar que los procesos peatonales ejecutados son variados y de diversa índole, sin poder precisar un hecho como causa principal. Según el momento y las circunstancias, las peatonalizaciones responden a distintas iniciativas promovidas por los comerciantes, por las administraciones locales o por los técnicos de planeamiento, con sus expertas aportaciones en los planes. Estos tres agentes actúan como impulsores de proyectos individuales peatonales que se van solapando en el tiempo. Como punto final de la tesis, se propone una serie de nuevas líneas de investigación que pueden servir como estudio adicional y complementario, respondiendo a aspectos tan relevantes como cuestiones de índole económica, social y de movilidad, fuertemente ligadas a las peatonalizaciones, tal y como se demuestra en la literatura consultada. ABSTRACT This thesis aims to analyse the pedestrian elements dealing with the needs and infrastructures that support pedestrians, as this is a field that is little developed in our country, in comparison to other regions such as Denmark, the United Kingdom, Germany and the Netherlands, where the pedestrian actions implemented are traditional and highly successful. Therefore, even though little research has been done about this topic, this field is increasingly important throughout these years of search for urban models intended to prevent the waste of resources and to develop new mobility ways, more adapted to a limited, vulnerable world. This research is essentially descriptive and it mainly aims to document and systematically analysed a scarcely known reality by providing data in order to understand the origin and development of pedestrian actions. This thesis intends to lay the foundations of this field in Spain, accurately defining the state of the art from a geographical point of view and preparing a full thematic map that may be used in the future. The overall aim is to study and understand the pedestrian elements of a limited number of Spanish medium-size cities, establishing the following specific goals: - To identify and describe the main elements comprising cities' pedestrian networks. - To study of special predominant typologies, their features and origins, with the possibility to, on the one hand, make a difference between the typologies developed in well-established cities, such as the actions in historic quarters, and, on the other hand, those implemented in new cities through generally residential architectural formulae with adjoining pedestrian areas. - To analyse the said elements in order to check whether they have resulted in pedestrian-use networks, whether they have been established by organising the city, such as the linear axes in coastal and riverside cities, or whether they have had an impact on the character of the areas where these elements have been implemented, focusing on pedestrian historic quarters. - Check whether there are actions supplementary to the urban development and urban improvement processes, as well as the approval of financial support and subventions to deal with these actions. - Finally, to describe and assess the processes and procedures by which the pedestrianisation of certain urban areas is carried out, the origins, the instruments and the date of their implementation, providing a pedestrian timeline. The methodology starts by defining 22 Spanish cities, province capitals with a population ranging from 100,000 to 500,000 inhabitants, according to the data recorded by the Spanish Statistics Institute (INE) in 2009. The distribution of coastal, riverside and interior cities, as well as of patrimonial cities and cities in islands, etc. is well balanced. The analysis of the pedestrian elements of these cities is made with the great resolution of the public and private map databases that can be accessed on the Internet, especially using the "street-view" version of tools such as Google Earth and Google Maps, software applications that allow to go for a virtual walk in each city, providing highly precise details about the pedestrian actions. The following cities have been chosen: ‐ 11 coastal cities: Alicante, Almería, Bilbao, Cádiz, Castellón de la Plana, Huelva, Las Palmas de Gran Canaria, Palma de Mallorca, Santander, San Sebastián and Tarragona. ‐ 11 interior cities: Albacete, Burgos, Córdoba, León, Lérida, Logroño, Oviedo, Murcia, Pamplona, Valladolid and Vitoria. Finally, as they have the highest percentages regarding the pedestrian areas found in the historic quarters, 3 cities representing a deep pedestrian development have been chosen: Burgos, San Sebastián and Pamplona. Other significant methodological aspects are the many documents found from online sources, especially when preparing the last chapter: “Processes for the pedestrianisation of Spanish cities”, which focuses on the 3 cities chosen. Local newspaper and periodical libraries, official gazettes, the minutes of plenary sessions of councils and the zoning regulation documents (General Zoning Plans, Special Zoning Plans, Municipal Plans and Projects, Mobility Plans, etc.) have been consulted, obtaining accurate information regarding the timeline and the extension of the works carried out. The methodology is supplemented by interviews with key players in the pedestrianisation process, such as the technical staff in councils and the officers drafting and designing the projects, as well as with the direct collaboration by the officers of the councils of the 3 cities chosen, who provided all the information requested. The thesis introduces the pedestrian elements by studying pedestrian areas and existing pedestrianisation processes through the analysis of the literature consulted, providing valuable information for the definition of pedestrian models and showing a brief history and background of the pedestrianisation process. Remarkable papers published by some European experts in the field, such as Carmen Hass-Klau, Rolf Monheim and Collin Buchanan, are covered in the thesis. In Spain, the pedestrianisation actions were late in time in comparison to the rest of Europe, with at least 40 years of delay. The Spanish literature references in this field are limited. The most significant papers are those published by Alfonso Sanz and by Professor Julio Pozueta, with a special mention of one of his last works "La ciudad paseable" (The Walkable City), which describes the pedestrian elements found in the cities and is used a model and an example for this research. Based on the elements above, pedestrian elements are defined as those construction-free public areas that, due to their features and design, ensure the comfortable, convenient use of the spaces, characterised by pedestrian traffic and specifically reserved for this purpose. The thesis detects and specifies the following pedestrian elements: pedestrian streets and squares, pavements (sidewalks) and boulevards with a width exceeding 8 metres, pedestrian promenades, crossing elements (traditional and mechanical), pedestrian spaces linked to new residential areas, colonnades and pedestrian passages or narrow streets with a minimum width of 4 metres, exhibition sites, free spaces and green areas and parks. For each of the 22 cities chosen, a thorough inventory of the elements mentioned above has been made by using worksheets, providing a significant number of individual projects developed in each city. This information is graphically collected and displayed on 2 photomaps, resulting in tools essential for this research. Photomap 1 is made based on the city displayed by Google Earth, making a difference between pedestrian areas and green areas. On Photomap 2, using the tool mentioned above, a difference can be made between persistent and predominant typologies, such as the big pedestrian axes, the local pedestrian networks and singular pedestrian elements. Finally, the 2 photomaps are used in order to establish the so-called "pedestrian footprint", which is highlighted by its attractiveness and appeal, concepts for which the pedestrian field is very useful. With the pedestrian footprint, quick information can be obtained, since the map shows two colours: orange for pedestrian elements (made up of pedestrian areas and green areas) and black for the other non-pedestrian elements. A significant part of these graphic, descriptive documents about each city's pedestrian elements can be found in the thesis appendix. The "Pedestrian Footprint" is regarded in the research as the basic map, obtaining a quick, clear and visual perception of each city's pedestrian space. This footprint provides morphological information regarding the space distribution, the organisation, the balance, the modulation, the cohesion, the pedestrian concentration, etc. in each of the cities chosen. The pedestrian footprint helps solve many of the questions established as the thesis goals, proving that, in general, the pedestrian elements are not organised in the urban plot, as there is no structure modulating the city as a properly linked set of elements. Small networks linked to each other and heterogeneously scattered all over the city are found. It has been verified that the pedestrian elements with the highest concentration and presence in the cities analysed are the pedestrian axes, the historic quarters and the pedestrian elements found in the new residential areas. Besides these 3 elements mentioned, the research analyses in depth other types that are remarkable due to their persistence and repetition in the "Pedestrian Footprint" of each of the 22 cities, such as the pedestrian squares, the colonnades and the singular pedestrian elements: traditional spaces (exhibition sites, passages, historic bridges), new pedestrian elements (pedestrian footbridges, mechanical crossing elements), pedestrian areas around cultural buildings and other cases such as those consisting of recovering and transforming building and urban constructions, intended for a wide range of purposes and of different types, into new pedestrian areas. This work puts light on the definition, location, timeline, proportion, presence and origin, providing results for each of these concepts. At the same time, quantitative information is obtained by measuring the footprint, getting data and percentages on the size of the city, the pedestrian areas and the green areas, the historic quarters and the pedestrian zones, the linear metres of such historic quarters and pedestrian streets. The footprint also provides ratios and rates that are considered as essential in order to better understand the pedestrian elements of each city. A classification of cities is established for each of the areas described, highlighting the cities of Pamplona, San Sebastián and Burgos, as they provide the most positive pedestrian figures and lead most of the classification tables or rankings. According to the criteria considered, the city with the worst values is Alicante, followed by Almería, Palma de Mallorca and Las Palmas de Gran Canaria. In the final chapter in the thesis, the cities of Burgos, San Sebastián and Pamplona are chosen as representative study cases. The aim is to gain more accurate knowledge regarding the pedestrianisation origin, timeline and processes. Each city comprises a chronological sequence made of stages, each of which is thoroughly developed and usually announced as zoning plans or urban development projects, accompanied by the plans of the pedestrian actions. At the end of each stage, data with the figures of the pedestrianisation projects are provided, including a numerical chart with locations, pedestrian area, redeveloped urban areas, pedestrian length and pedestrianisation degree in the historic quarter, as well as the data cumulated throughout each stage. In the crossed conclusions on the three cities, the trend of gradually pedestrianising the historic quarters (even reaching the 100% of the pedestrian streets as in San Sebastián) is verified. However, it is difficult to confirm whether the purpose is to reach an overall pedestrianisation of the historic quarters, since there are many variables that affect and influence each city's pedestrianisation process. In addition, the spread of the pedestrian culture from the internal areas to the external areas, beyond the historic quarters to the nearby expansion areas, is compared. Regarding the origin of pedestrianisations, the thesis comes to the conclusion that there is no initial or theoretical conception from which each city's pedestrian plot is developed. The pedestrian processes implemented are varied and diverse but no fact can be specified as the main cause. Based on the moment and circumstances, the pedestrianisation processes are due to different initiatives promoted by shopkeepers, by the local administrations or by the zoning officers, with their expert contributions to the plans. These three players promote and drive individual pedestrianisation projects that overlap in the course of time. Finally, new lines of research are put forwards, as they can be taken as an additional study and as a supplement to this research, dealing with aspects as significant as the economic, social and mobility factors, closely linked to the pedestrianisation processes, as proven in the literature consulted.

Voltage dependence of the pattern and frequency of discrete Ca2+ release events after brief repriming in frog skeletal muscle

Applying a brief repolarizing pre-pulse to a depolarized frog skeletal muscle fiber restores a small fraction of the transverse tubule membrane voltage sensors from the inactivated state. During a subsequent depolarizing test pulse we detected brief, highly localized elevations of myoplasmic Ca2+ concentration (Ca2+ “sparks”) initiated by restored voltage sensors in individual triads at all test pulse voltages. The latency histogram of these events gives the gating pattern of the sarcoplasmic reticulum (SR) calcium release channels controlled by the restored voltage sensors. Both event frequency and clustering of events near the start of the test pulse increase with test pulse depolarization. The macroscopic SR calcium release waveform, obtained from the spark latency histogram and the estimated open time of the channel or channels underlying a spark, exhibits an early peak and rapid marked decline during large depolarizations. For smaller depolarizations, the release waveform exhibits a smaller peak and a slower decline. However, the mean use time and mean amplitude of the individual sparks are quite similar at all test depolarizations and at all times during a given depolarization, indicating that the channel open times and conductances underlying sparks are essentially independent of voltage. Thus, the voltage dependence of SR Ca2+ release is due to changes in the frequency and pattern of occurrence of individual, voltage-independent, discrete release events.

Mature monocytic cells enter tissues and engraft

The goal of this study was to identify the circulating cell that is the immediate precursor of tissue macrophages. ROSA 26 marrow mononuclear cells (containing the β-geo transgene that encodes β-galactosidase and neomycin resistance activities) were cultured in the presence of macrophage colony-stimulating factor and flt3 Ligand for 6 days to generate monocytic cells at all stages of maturation. Expanded monocyte cells (EMC), the immature (ER-MP12+) and more mature (ER-MP20+) subpopulations, were transplanted into irradiated B6/129 F2 mice. β-gal staining of tissue sections from animals 15 min after transplantation demonstrated that the donor cells landed randomly. By 3 h, donor cells in lung and liver were more frequent in animals transplanted with ER-MP20+ (more mature) EMC than in animals transplanted with unseparated EMC or fresh marrow mononuclear cells, a pattern that persisted at 3 and 7 days. At 3 days, donor cells were found in spleen, liver, lung, and brain (rarely) as clusters as well as individual cells. By 7 and 14 days, the clusters had increased in size, and the cells expressed the macrophage antigen F4/80, suggesting that further replication and differentiation had occurred. PCR for the neogene was used to quantitate the amount of donor DNA in tissues from transplanted animals and confirmed that ER-MP20+ EMC preferentially engrafted. These data demonstrate that a mature monocytic cell gives rise to tissue macrophages. Because these cells can be expanded and manipulated in vitro, they may be a suitable target population for gene therapy of lysosomal storage diseases.

Detection and selective dissociation of intact ribosomes in a mass spectrometer

Intact Escherichia coli ribosomes have been projected into the gas phase of a mass spectrometer by means of nanoflow electrospray techniques. Species with mass/charge ratios in excess of 20,000 were detected at the level of individual ions by using time-of-flight analysis. Once in the gas phase the stability of intact ribosomes was investigated and found to increase as a result of cross-linking ribosomal proteins to the rRNA. By lowering the Mg2+ concentration in solutions containing ribosomes the particles were found to dissociate into 30S and 50S subunits. The resolution of the charge states in the spectrum of the 30S subunit enabled its mass to be determined as 852,187 ± 3,918 Da, a value within 0.6% of that calculated from the individual proteins and the 16S RNA. Further dissociation into smaller macromolecular complexes and then individual proteins could be induced by subjecting the particles to increasingly energetic gas phase collisions. The ease with which proteins dissociated from the intact species was found to be related to their known interactions in the ribosome particle. The results show that emerging mass spectrometric techniques can be used to characterize a fully functional biological assembly as well as its isolated components.

Multiple independent origins of Shigella clones of Escherichia coli and convergent evolution of many of their characteristics

The evolutionary relationships of 46 Shigella strains representing each of the serotypes belonging to the four traditional Shigella species (subgroups), Dysenteriae, Flexneri, Boydii, and Sonnei, were determined by sequencing of eight housekeeping genes in four regions of the chromosome. Analysis revealed a very similar evolutionary pattern for each region. Three clusters of strains were identified, each including strains from different subgroups. Cluster 1 contains the majority of Boydii and Dysenteriae strains (B1–4, B6, B8, B10, B14, and B18; and D3–7, D9, and D11–13) plus Flexneri 6 and 6A. Cluster 2 contains seven Boydii strains (B5, B7, B9, B11, B15, B16, and B17) and Dysenteriae 2. Cluster 3 contains one Boydii strain (B12) and the Flexneri serotypes 1–5 strains. Sonnei and three Dysenteriae strains (D1, D8, and D10) are outside of the three main clusters but, nonetheless, are clearly within Escherichia coli. Boydii 13 was found to be distantly related to E. coli. Shigella strains, like the other pathogenic forms of E. coli, do not have a single evolutionary origin, indicating convergent evolution of Shigella phenotypic properties. We estimate the three main Shigella clusters to have evolved within the last 35,000 to 270,000 years, suggesting that shigellosis was one of the early infectious diseases of humans.

Spatial memory is related to hippocampal subcellular concentrations of calcium-dependent protein kinase C isoforms in young and aged rats

Relationships were examined between spatial learning and hippocampal concentrations of the α, β2, and γ isoforms of protein kinase C (PKC), an enzyme implicated in neuronal plasticity and memory formation. Concentrations of PKC were determined for individual 6-month-old (n = 13) and 24-month-old (n = 27) male Long–Evans rats trained in the water maze on a standard place-learning task and a transfer task designed for rapid acquisition. The results showed significant relationships between spatial learning and the amount of PKC among individual subjects, and those relationships differed according to age, isoform, and subcellular fraction. Among 6-month-old rats, those with the best spatial memory were those with the highest concentrations of PKCγ in the particulate fraction and of PKCβ2 in the soluble fraction. Aged rats had increased hippocampal PKCγ concentrations in both subcellular fractions in comparison with young rats, and memory impairment was correlated with higher PKCγ concentrations in the soluble fraction. No age difference or correlations with behavior were found for concentrations of PKCγ in a comparison structure, the neostriatum, or for PKCα in the hippocampus. Relationships between spatial learning and hippocampal concentrations of calcium-dependent PKC are isoform-specific. Moreover, age-related spatial memory impairment is associated with altered subcellular concentrations of PKCγ and may be indicative of deficient signal transduction and neuronal plasticity in the hippocampal formation.

An estrogen receptor pathway regulates the telogen-anagen hair follicle transition and influences epidermal cell proliferation.

The hair follicle is a cyclic, self renewing epidermal structure which is thought to be controlled by signals from the dermal papilla, a specialized cluster of mesenchymal cells within the dermis. Topical treatments with 17-beta-estradiol to the clipped dorsal skin of mice arrested hair follicles in telogen and produced a profound and prolonged inhibition of hair growth while treatment with the biologically inactive stereoisomer, 17-alpha-estradiol, did not inhibit hair growth. Topical treatments with ICI 182,780, a pure estrogen receptor antagonist, caused the hair follicles to exit telogen and enter anagen, thereby initiating hair growth. Immunohistochemical staining for the estrogen receptor in skin revealed intense and specific staining of the nuclei of the cells of the dermal papilla. The expression of the estrogen receptor in the dermal papilla was hair cycle-dependent with the highest levels of expression associated with the telogen follicle. 17-beta-Estradiol-treated epidermis demonstrated a similar number of 5-bromo-2'-deoxyuridine (BrdUrd) S-phase cells as the control epidermis above telogen follicles; however, the number of BrdUrd S-phase basal cells in the control epidermis varied according to the phase of the cycle of the underlying hair follicles and ranged from 2.6% above telogen follicles to 7.0% above early anagen follicles. These findings indicate an estrogen receptor pathway within the dermal papilla regulates the telogen-anagen follicle transition and suggest that diffusible factors associated with the anagen follicle influence cell proliferation in the epidermis.

Pore-forming toxins trigger shedding of receptors for interleukin 6 and lipopolysaccharide.

Cleavage of membrane-associated proteins with the release of biologically active macromolecules is an emerging theme in biology. However, little is known about the nature and regulation of the involved proteases or about the physiological inducers of the shedding process. We here report that rapid and massive shedding of the interleukin 6 receptor (IL-6R) and the lipopolysaccharide receptor (CD14) occurs from primary and transfected cells attacked by two prototypes of pore-forming bacterial toxins, streptolysin O and Escherichia coli hemolysin. Shedding is not induced by an streptolysin O toxin mutant which retains cell binding capacity but lacks pore-forming activity. The toxin-dependent cleavage site of the IL-6R was mapped to a position close to, but distinct from, that observed after stimulation with phorbol myristate acetate. Soluble IL-6R that was shed from toxin-treated cells bound its ligand and induced an IL-6-specific signal in cells that primarily lacked the IL-6R. Transsignaling by soluble IL-6R and soluble CD14 is known to dramatically broaden the spectrum of host cells for IL-6 and lipopolysaccharide, and is thus an important mechanism underlying their systemic inflammatory effects. Our findings uncover a novel mechanism that can help to explain the long-range detrimental action of pore-forming toxins in the host organism.

The human CAS protein which is homologous to the CSE1 yeast chromosome segregation gene product is associated with microtubules and mitotic spindle.

Human CAS cDNA contains a 971-aa open reading frame that is homologous to the essential yeast gene CSE1. CSE1 is involved in chromosome segregation and is necessary for B-type cyclin degradation in mitosis. Using antibodies to CAS, it was shown that CAS levels are high in proliferating and low in nonproliferating cells. Here we describe the distribution of CAS in cells and tissues analyzed with antibodies against CAS. CAS is an approximately 100-kDa protein present in the cytoplasm of proliferating cells at levels between 2 x 10(5) and 1 x 10(6) molecules per cell. The intracellular distribution of CAS resembles that of tubulin. In interphase cells, anti-CAS antibody shows microtubule-like patterns and in mitotic cells it labels the mitotic spindle. CAS is removed from microtubules by mild detergent treatment (cytoskeleton preparations) and in vincristine- or taxol-treated cells. CAS is diffusely distributed in the cytoplasm with only traces present in tubulin paracrystals or bundles. Thus, CAS appears to be associated with but not to be an integral part of microtubules. Immunohistochemical staining of frozen tissues shows elevated amounts of CAS in proliferating cells such as testicular spermatogonia and cells in the basal layer cells of the colon. CAS was also concentrated in the respiratory epithelium of the trachea and in axons and Purkinje cells in the cerebellum. These cells contain many microtubules. The cellular location of CAS is consistent with an important role in cell division as well as in ciliary movement and vesicular transport.

De novo biosynthesis of the aggregation pheromone components ipsenol and ipsdienol by the pine bark beetles Ips paraconfusus Lanier and Ips pini (Say) (Coleoptera: Scolytidae).

The California five-spined ips, Ips paraconfusus Lanier, produces the myrcene-derived acyclic monoterpene alcohols ipsenol (2-methyl-6-methylene-7-octen-4-ol) and ipsdienol (2-methyl-6-methylene-2,7-octadien-4-ol) as components of its aggregation pheromone. The pine engraver beetle, Ips pini (Say), produces only ipsdienol. Previous studies have shown that myrcene, a monoterpene in the pines colonized by these beetles, is a direct precursor to these pheromone components. In vivo radiolabeling studies reported here showed that male I. paraconfusus incorporated [1-14C]acetate into ipsenol, ipsdienol, and amitinol (trans-2-methyl-6-methylene-3,7-octadien-2-ol), while male I. pini incorporated [1-14C]acetate into ipsdienol and amitinol. Females of these species produced neither labeled nor unlabeled pheromone components. The purified radiolabeled monoterpene alcohols from-males were identified by comparison of their HPLC and GC retention times with those of unlabeled standards. HPLC-purified fractions containing the individual radiolabeled components were analyzed by GC-MS and were shown to include only the pure alcohols. To further confirm that ipsdienol and ipsenol were radiolabeled, diastereomeric ester derivatives of the isolated alcohols were synthesized and analyzed by HPLC and GC-MS. After derivatization of the radiolabeled alcohols, the HPLC analysis demonstrated expected shifts in retention times with conservation of naturally occurring stereochemistry. The results provide direct evidence for de novo biosynthesis of ipsenol, ipsdienol, and amitinol by bark beetles.

Calix[6]arene Derivatives as Pivotal Components of Working Devices and Molecular Machine Prototypes

This Ph.D. thesis describes the synthesis, characterization and study of calix[6]arene derivatives as pivotal components for the construction of molecular machine prototypes. Initially, the ability of a calix[6]arene wheel to supramolecularly assist and increase the rate of a nucleophilic substitution reaction was exploited for the synthesis of two constitutionally isomeric oriented rotaxanes. Then, the synthesis and characterization of several hetero-functionalised calix[6]arene derivatives and the possibility to obtain molecular muscle prototypes was reported. The ability of calix[6]arenes to form oriented pseudorotaxane towards dialkyl viologen axles was then exploited for the synthesis of two calixarene-based [2]catenanes. As last part of this thesis, studies on the electrochemical response of the threading-dethreading process of calix[6]arene-based pseudorotaxanes and rotaxanes supported on glassy carbon electrodes are reported.