Study of the variation of the input impedance of induction machines with frequency

The results of a study of the variation of three-phase induction machines' input impedance with frequency are proposed. A range of motors were analysed, both two-pole and four-pole, and the magnitude and phase of the input impedance were obtained over a wide frequency range of 20 Hz-1 MHz. For test results that would be useful in the prediction of the performance of induction machines during typical use, a test procedure was developed to represent closely typical three-phase stator coil connections when the induction machine is driven by a three-phase inverter. In addition, tests were performed with the motor's cases both grounded and not grounded. The results of the study show that all induction machines of the type considered exhibit a multiresonant impedance profile, where the input impedance reaches at least one maximum as the input frequency is increased. Furthermore, the test results show that the grounding of the motor's case has a significant effect on the impedance profile. Methods to exploit the input impedance profile of an induction machine to optimise machine and inverter systems are also discussed.

Space physics for graduate students: an activities-based approach

The geospace environment is controlled largely by events on the Sun, such as solar flares and coronal mass ejections, which generate significant geomagnetic and upper atmospheric disturbances. The study of this Sun-Earth system, which has become known as space weather, has both intrinsic scientific interest and practical applications. Adverse conditions in space can damage satellites and disrupt communications, navigation, and electric power grids, as well as endanger astronauts. The Center for Integrated Space Weather Modeling (CISM), a Science and Technology Center (STC) funded by the U.S. National Science Foundation (see http://www.bu.edu/cism/), is developing a suite of integrated physics-based computer models that describe the space environment from the Sun to the Earth for use in both research and operations [Hughes and Hudson, 2004, p. 1241]. To further this mission, advanced education and training programs sponsored by CISM encourage students to view space weather as a system that encompasses the Sun, the solar wind, the magnetosphere, and the ionosphere/thermosphere. This holds especially true for participants in the CISM space weather summer school [Simpson, 2004].

Techno-economic modelling and cost functions of CO2 capture processes

The paper presents the techno-economic modelling of CO2 capture process in coal-fired power plants. An overall model is being developed to compare carbon capture and sequestration options at locations within the UK, and for studies of the sensitivity of the cost of disposal to changes in the major parameters of the most promising solutions identified. Technological options of CO2 capture have been studied and cost estimation relationships (CERs) for the chosen options calculated. Created models are related to the capital, operation and maintenance cost. A total annualised cost of plant electricity output and amount of CO2 avoided have been developed. The influence of interest rates and plant life has been analysed as well. The CERs are included as an integral part of the overall model.

Joint importance of multistate systems

Importance measures in reliability engineering are used to identify weak areas of a system and signify the roles of components in either causing or contributing to proper functioning of the system. Traditional importance measures for multistate systems mainly concern reliability importance of an individual component and seldom consider the utility performance of the systems. This paper extends the joint importance concepts of two components from the binary system case to the multistate system case. A joint structural importance and a joint reliability importance are defined on the basis of the performance utility of the system. The joint structural importance measures the relationship of two components when the reliabilities of components are not available. The joint reliability importance is inferred when the reliabilities of the components are given. The properties of the importance measures are also investigated. A case study for an offshore electrical power generation system is given.

The elasticity of demand is about occupancy, not prices: building European demand curves based on occupancy elasticity

The peak congestion of the European grid may create significant impacts on system costs because of the need for higher marginal cost generation, higher cost system balancing and increasing grid reinforcement investment. The use of time of use rates, incentives, real time pricing and other programmes, usually defined as Demand Side Management (DSM), could bring about significant reductions in prices, limit carbon emissions from dirty power plants, and improve the integration of renewable sources of energy. Unlike previous studies on elasticity of residential electricity demand under flat tariffs, the aim of this study is not to investigate the known relatively inelastic relationship between demand and prices. Rather, the aim is to assess how occupancy levels vary in different European countries. This reflects the reality of demand loads, which are predominantly determined by the timing of human activities (e.g. travelling to work, taking children to school) rather than prices. To this end, two types of occupancy elasticity are estimated: baseline occupancy elasticity and peak occupancy elasticity. These represent the intrinsic elasticity associated with human activities of single residential end-users in 15 European countries. This study makes use of occupancy time-series data from the Harmonised European Time Use Survey database to build European occupancy curves; identify peak occupancy periods; draw time use demand curves for video and TV watching activity; and estimate national occupancy elasticity levels of single-occupant households. Findings on occupancy elasticities provide an indication of possible DSM strategies based on occupancy levels and not prices.

‘Nudging’ energy users: regulatory measures to address the risk of aggregate peak demand in European electricity markets

For decades regulators in the energy sector have focused on facilitating the maximisation of energy supply in order to meet demand through liberalisation and removal of market barriers. The debate on climate change has emphasised a new type of risk in the balance between energy demand and supply: excessively high energy demand brings about significantly negative environmental and economic impacts. This is because if a vast number of users is consuming electricity at the same time, energy suppliers have to activate dirty old power plants with higher greenhouse gas emissions and higher system costs. The creation of a Europe-wide electricity market requires a systematic investigation into the risk of aggregate peak demand. This paper draws on the e-Living Time-Use Survey database to assess the risk of aggregate peak residential electricity demand for European energy markets. Findings highlight in which countries and for what activities the risk of aggregate peak demand is greater. The discussion highlights which approaches energy regulators have started considering to convince users about the risks of consuming too much energy during peak times. These include ‘nudging’ approaches such as the roll-out of smart meters, incentives for shifting the timing of energy consumption, differentiated time-of-use tariffs, regulatory financial incentives and consumption data sharing at the community level.

DC traction load flow including AC distribution network

In the first part some information and characterisation about an AC distribution network that feeds traction substations and their possible influences on the DC traction load flow are presented. Those influences are investigated and mathematically modelled. To corroborate the mathematical model, an example is presented and their results are confronted with real measurements.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Fjärrvärmedrivna vitvaror : Erfarenheter från utveckling, installationer och kostnadsberäkningar

Värmedrivna vitvaror eller HWC-maskiner som de kallas av tillverkaren värms med varmt vatten från en cirkulerande krets via en värmeväxlare inbyggd i maskinen, till skillnad från konventionella maskiner som värms med el. Denna teknik skall inte förväxlas med maskiner som är anslutna till varmvattenledningen och fylls på med varmt vatten och som därmed begränsas till disk- och tvätt. Syftet med fjärrvärmedrivna vitvaror är alltså att använda fjärrvärme, som har lägre kvalitet och pris än elenergi för uppvärmning och torkning och på så sätt spara el och utöka fjärrvärmeunderlaget. En jämförelse av koldioxidutsläpp och primärenergianvändning mellan konventionella vitvaror och fjärrvärmedrivna vitvaror visar att både koldioxidutsläpp och primärenergianvändning blir lägre för fjärrvärmedrivna vitvaror om biobränsle anses koldioxidneutralt och den el som ersätts är producerad i kolkraftverk eller gaskombikraftverk.   Denna rapport beskriver utveckling och kommersialisering av värmedrivna vitvaror (disk- och tvättmaskiner samt torktumlare och torkskåp) och hur de kan anslutas mot fjärrvärmesystem i olika systemlösningar. Dessutom har de energimässiga och ekonomiska förutsättningarna för tekniken undersökts. Erfarenheterna från fältprovning är dock mycket begränsade, eftersom de byggen där fälttesterna skulle ske försenades. Under 2013 färdigställs ett flerbostadshus med värmedrivna vitvaror i 160 lägenheter i Västerås.   De utvecklade maskinernas värmeanvändning som andel av total energianvändning vid 60 graders framledningstemperatur har uppmätts till ca 50 % för diskmaskinen, 67 % för tvättmaskinen, 80 % för torktumlaren och 93 % för torkskåpet. I det studerade flerbostadshuset av passivhusstandard uppgår lasten från värmedrivna vitvaror komfortgolvvärme och handdukstorkar till upp mot 30 % av husets totala värmeanvändning. För småhus är motsvarande siffra upp mot 20 %. Att använda fjärrvärme istället för elvärme till dessa installationer som normalt är elvärmda kan allts minska elbehovet betydligt i lågenergibebyggelse vilket också minskar både koldioxidutsläppen och primärenergianvändningen.   Ekonomiska analyser har genomförts för två olika systemkoncept (separat vitvarukrets och Västeråsmodellen) för nybyggda småhusområden och flerfamiljshus där fjärrvärme inte bara används till vitvaror utan också till handdukstorkar och komfortgolvvärme. De ekonomiska analyserna visar att Västeråsmodellen är den mest ekonomiskt intressanta systemlösningen med värmedrivna vitvaror, handdukstork och komfortgolvvärme. I flerfamiljshus kan den vara konkurrenskraftig mot de elvärmda alternativen (konventionellt system med eldrivna vitvaror, komfortgolvvärme och handdukstorkar) om prisskillnaden mellan el och fjärrvärme är större än 0,7 kr/kWh. En parameterstudie visar att kapitalkostnaden blir ganska hög jämfört med energikostnaden, vilket betyder att lång livslängd och många cykler är viktigt för att förbättra de ekonomiska förutsättningarna för värmedrivna vitvaror. För passiva småhus blir kostnaden för Västeråsmodellen med värmedrivna vitvaror, handdukstork och komfortgolvvärme likvärdig med de elvärmda alternativen vid energiprisskillnader på 0,7 kr/kWh inklusive moms, medan det krävs prisskillnader på 0,9 kr/kWh inklusive moms för normalisolerade småhusområden.   Sammanfattningsvis kan sägas att i kommuner med ett konkurrenskraftigt fjärrvärmepris finns det viss lönsamhet för hela konceptet enligt Västeråsmodellen med värmedrivna vitvaror, komfortgolvvärme, och handdukstorkar. Om man däremot ser på konkurrensen för enskilda vitvaror är det främst torktumlaren som är konkurrenskraftig i bostäder. Målpriset på 1000 kr extra för värmedrift har inte kunnat uppnås inom projektet för diskmaskiner och tvättmaskiner. Det krävs lägre priser och låga anslutningskostnader för att räkna hem diskmaskinen och tvättmaskinen som enskilda komponenter.   Värmedrivna tvättmaskiner och torktumlare är konkurrenskraftiga i flerfamiljstvättstugor. Speciellt i de fall där beläggningen är god och flera maskiner delar på anslutningskostnaden till fjärrvärmecentralen kan värmedrift bli riktigt lönsam. Torkskåpens konkurrenskraft har inte kunnat utvärderas, då priset ännu inte fastställts. Att använda VVC-systemet för värmedistribution till värmedrivna vitvaror kan vara mycket intressant, men det kräver att legionellaproblematiken kan lösas. I nuläget finns ingen lösning som uppfyller formuleringarna i boverkets byggregler. Ett annat distributionssätt som kan vara intressant, men som inte undersökts i studien är att använda VVC för varmvattendistribution och en gemensam radiator- och vitvarukrets med konstant framledningstemperatur. Den aktör som förväntas ha störst ekonomiskt intresse av att tekniken implementeras är sannolikt fjärrvärmebolagen som får sälja mer värme och det ligger därmed främst på deras ansvar att marknadsföra tekniken i mötet med sina kunder.

Estudo sobre a potencialidade de uso das escórias de aciaria como adição ao concreto

A geração de resíduos tem se mostrado um problema de preocupação mundial crescente. Muitos rejeitos, sejam industriais ou urbanos, muitas vezes acabam por poluir o meio-ambiente, causando problemas de armazenagem de certos materiais. Além disso, materiais alternativos a partir desses rejeitos podem ser mais baratos, apresentando muitas vezes características de desempenho melhores que os materiais convencionais. As siderúrgicas, em nível mundial, vêm enfrentando um problema comum, que consiste no que fazer para que a totalidade da escória gerada no refino do aço em aciarias elétricas ou à oxigênio tenha uma solução de aproveitamento melhor do que vem sendo feito atualmente. Na fabricação do aço as escorias são geradas em duas etapas: a primeira provém do chamado refino oxidante (forno elétrico a arco ou convertedor à oxigênio) e a segunda do refino redutor em processos de metalurgia na panela (forno-panela). Este trabalho tem como objetivo principal o de apontar potencialidades de uso da escória de aciaria elétrica, com destaque para a proveniente do forno-panela (escória do refino redutor), na indústria da construção civil através de testes em que a escória é utilizada, após moagem, como adição ao cimento Portland comum. Inicialmente foram realizados ensaios de viabilização para se testar a pozolanicidade, resistência à compressão, expansibilidade e profundidade de carbonatação de concretos gerados com diversas adições de escórias de aciaria elétrica. Comprovada a sua viabilidade partiu-se para os ensaios complementares do trabalho utilizando-se somente uma escória do refino redutor. Nesta segunda etapa foram realizados ensaios de caracterização de todos materiais estudados, ensaios de expansibilidade, ensaios mecânicos e de durabilidade dos concretos gerados com esta escória e ensaios de microscopia eletrônica de varredura e de difração de raios X do material. Após o estudo realizado comprovou-se ser perfeitamente viável a utilização de até 10% da escória do refino redutor (forno-panela- FP) como adição ao cimento para produção de concretos. Inclusive, independente do tempo de estocagem da escória, pode-se constatar melhorias no concreto produzido.

Integração de dados geofísicos e geológicos na avaliação ambiental e epidemiológica de radiações naturais (radônio) no escudo Sul-Riograndense (RS-Brasil)

Os efeitos provocados por radiações são conhecidos na literatura por meio dos estudos em usinas nucleares e em testes bélicos. Entretanto, os efeitos da radiação natural vêm despertando a atenção das autoridades da saúde, dentre as quais se destaca a Environmental Protection Agency (EPA) nos Estados Unidos e a National Radiological Protection Board (NRPB) no Reino Unido. Os efeitos epidemiológicos ocasionados por radiação de origem natural, mais especificamente a radiação emanada pelo gás radônio que fica acumulado em residências enclausuradas por muito tempo, tem sido alvo de intensas investigações. Nessa dissertação, foi realizada uma avaliação ambiental preliminar da radiação natural devida ao radônio como elemento epidemiológico no Escudo Sul-riograndense. Os dados utilizados para determinar o risco epidemiológico foram: neoplasias, radiação, geologia e população. O banco de dados dos casos de óbitos por neoplasias do estado foi obtido da Secretaria da Saúde, por meio do Núcleo de Informação em Saúde. A radiação natural devida ao radônio foi determinada a partir dos dados gamaespectrométricos obtidos de levantamento aerogeofísico da CPRM no Escudo Sul-riograndense, nos projetos Camaquã e Extremo Sudeste do Brasil realizados nos anos de 1973 e 1978, respectivamente. Os dados geológicos foram obtidos do Mapa Geológico do Estado de 1989. Os dados de população foram obtidos junto ao Instituto Brasileiro de Geografia e Estatística (IBGE). A integração de dados foi realizada usando a metodologia de matriz de sobreposição entre os dados de casos de óbitos por neoplasia e de gamaespectrometria. Os dados de população foram empregados para normalizar os dados de neoplasias, e o dado de geologia para correlacionar com a gamaespectrometria. Os resultados da integração são mapas classificados pelo grau de risco epidemiológico, nos quais é apresentada a relação entre os casos de neoplasias pela intensidade de radiação devida ao radônio. Nesse sentido, uma boa relação foi assinalada e são recomendados estudos adicionais sobre esse mesmo banco de dados.

O campo de energia elétrica no Brasil - de 1880 a 2002

Since electric power is an essential element in modern society, this paper analyzes the historic and institutional factors that have contributed to the formation and organization of the Brazilian electric sector, from the time when it started to be used in this country until the end of year 2002. This analysis is based on a linear description of historic facts, giving emphasis to crucial events ¿ or critical incidents, as they were called for the purpose of this paper. As to these happenings, the social actors who played an important role in the development of the Brazilian electric power sector were analyzed. An analytical model based on the theoretical references offered by the Institutional Theory was used. The study also highlights the elements that comprehend the development of the phenomenon in face of the ambivalence existing in a developing country, which is the case of the Brazilian electric power sector. The organizational fields that were established at the time determined by the main crucial incidents presented throughout the length of time covered by this study. The resources that the main social actors involved in the electric power sector may use by are also identified, as well as their main interests and level of influence these actors may have. Several documents were analyzed. The qualitative methodology was used. Also, many semi-structured in-depth interviews of the people who have made the history of this sector for reliability were conducted. Finally, this study includes the main elements that have shaped the institutional model of the Brazilian electric sector. It also characterizes the external environment as the element which has most influenced the sector and has also led its way throughout the different developmental phases, especially with respect to funding. The growing rates of power consumption indicate the need for a constant increase in the supply of electric power to meet the needs of society and economic development. This requires constant investment. Lack of investment is a limiting factor. Not only does it hinder the development of the country but it may also result in very unfortunate mishaps such as electric power rationing, such as the kind we had to endure a while ago.

Comportamento dos processos intra-organizacionais de aprendizagem tecnológica frente a uma mudança de estrutura de propriedade: o caso da TermoMacaé - PETROBRÁS

This academic work describes the interfirm technological learning processes behavior at a thermo plant throughout the years 2001 till 2007. Its former ownership structure was composed by two foreigners companies. This structure was changed by the acquisition of the company control by a Brazilian state owned company on April 2006. The company is a Natural Gas Fired Power Plant placed at Macaé City, at Rio de Janeiro State, Brazil generating electric power right to National Integrated System (SIN). The goal of this research is verify how the technological knowledge had been acquired by the firm and how it had been spread out throughout the organization before and after the change of the ownership structure. The taxonomy applied to determining of ownership structure take in account three parameters: type, specific characteristic and the ownership structure itself. Technological Learning Interfirm Processes have been examined from a model of systemic approach that establishes four key characteristics: ¿variety, intensity, functioning and interaction¿. During 2001 until 2006, till the change of owner structure, the firm developed its own learning processes in its own operational routines. The main learning processes have been identified from empirical evidences. It has been adopted the cut line at year of 2006 for the comparison among the technological learning processes behavior, when the change of ownership structure took place. The data capture occurred within April and August 2007 covering since 2001. Verified the behavior of these learning processes before and after the ownership structure changed from private property to state owned property. The conclusion of this case study suggests that interfirm processes of technological learning identified by the research had their dynamical behavior promptly affected by a change from private to ownerstate ownership structure, exposing the company to a poor performance in its industry, due to the lack of 51% of the technological intrafirm learning processes and reduction of the acquisition of new technical knowledge and its conversion throughout the organization.

Formação de agenda e processo decisório nos governos FHC e Lula: uma análise sobre a dinâmica e as oportunidades de negociação no processo de tomada de decisão do setor elétrico

O objetivo principal desta tese é analisar as particularidades de dois processos decisórios relacionados a políticas públicas do governo federal brasileiro, a saber, a formação de agenda e as escolhas de alternativas. Tais particularidades do processo decisório caracterizam-se por limitar, em um primeiro momento, o leque de temas que potencialmente poderiam ocupar um lugar de destaque frente aos governantes e, em seguida, por selecionar as alternativas viáveis de serem implementadas pelo poder público. Dessa maneira, serão objetos desta tese a compreensão do por que apenas determinados temas fazem parte da agenda de um governo e qual o grau de influência dos atores sociopolíticos sobre o processo de escolha de alternativas, de tal forma que algumas são seriamente consideradas enquanto outras são negligenciadas. Para analisar as particularidades dos processos decisórios foram feitas análises sobre dois casos do setor elétrico: a expansão da geração de energia elétrica durante o período que antecedeu a crise de 2001 e a criação de um novo modelo para o setor, nos anos de 2003 e 2004. Esta tese traz como hipótese que aspectos centrais de uma política não são alterados enquanto a coalizão dominante que a instituiu estiver no poder ¿ ainda que aspectos secundários possam vir a ser alterados durante esse período.

A (des) construção dos modelos regulatórios no setor de energia elétrica do Brasil: instabilidades, incertezas e a reforma institucional de 2004

Nos últimos anos, a indústria elétrica brasileira passou, basicamente, por duas reestruturações setoriais, implantadas segundo políticas e ideologias divergentes, mas que convergiram para o mesmo objetivo final: a busca por investimentos privados para dar suporte à expansão do sistema. Esse é o grande desafio do novo modelo institucional de 2004, que surge em um ambiente conturbado, de forte percepção de riscos e incertezas. A própria instabilidade regulatória é a grande responsável pelo recuo e ponderação na hora de investir. Contudo, a pergunta que se faz na presente pesquisa objetiva identificar os fatores motivadores da nova reestruturação setorial. Só assim, pode-se correlacionar os fatos do passado com a recente reforma, identificando possíveis deficiências e fatores críticos de sucesso. Para tanto, o presente estudo recorreu à literatura existente, assim como a entrevistas semi-estruturadas com especialistas do setor elétrico brasileiro. Os dados foram analisados qualitativamente, por meio de categorias estabelecidas a posteriori, buscando-se aceitar ou refutar suposições. As evidências sugerem que, apesar de a nova reforma institucional ter realizado avanços, ao introduzir mecanismos absorvidos, principalmente, a partir das experiências regulatórias dos últimos anos, dificuldades ainda permanecem e devem ser enfrentadas, especialmente no que tange à mitigação dos riscos ambientais e regulatórios, este último, percebido com maior intensidade a partir de 2004. Sendo assim, cabe ao governo federal, representado pelo Ministério de Minas e Energia (MME), conseguir atrair investimentos e proporcionar estabilidade regulatória, a fim de afastar o “fantasma” do racionamento.