967 resultados para Nursing homes and assisted living facilities and reports


Relevância:

100.00% 100.00%

Publicador:

Resumo:

More than 95% of the reforested area in Brazil is covered by exotic Eucalyptus and Pinus plantations. Native Scolytidae, mostly ambrosia beetles, appear to be rapidly adapting to these exotic trees, and reports of economic damage are becoming frequent. The objectives of our research were to survey, characterize and compare the Scolytidae fauna present in a P. taeda and an E. grandis stand in Telemaco Borba, Parana state, Brazil. Beetles were caught in ethanol baited ESALQ-84 vane traps in weekly collections from July 1995 until July 1997. In all, 87 species were trapped, 62 in the pine and 75 in the eucalypt stand. The most abundant beetle species in the pines were Hypothenemus eruditus, Xyleborinus gracilis, Cryptocarenus sp. and Xylosandrus retusus, while the most frequent were H. eruditus, Cryptocarenus sp., H. obscurus, Ambrosiodmus obliquus, and X. gracilis. In the eucalypt stand, H. eruditus, X. retusus, H. obscurus, X. ferrugineus and Microcorthylus minimus were the most abundant species, and H. eruditus, H. obscurus and M. minimus were the most frequently trapped. The majority of the species, regardless of the forest community, were most active between August (end of winter) and October (mid-spring). Significantly more H. eruditus, X. gracilis, Cryptocarenus sp., Corthylus obliquus, Hypothenemus bolivianus, A. obliquus, Sampsonius dampfi and Xyleborus affinis were trapped in the pine stand, while X. retusus, H. obscurus, X. ferrugineus, Xyleborinus linearicollis, Corthylus sp, and Corthylus convexicauda were caught in higher numbers in the eucalypt stand. Approximately 50% of the species trapped were found in both communities. Morisita's similarity index indicates the composition of the two communities is very similar, suggesting that most of the beetles are polyphagous. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

CONTEXTO E OBJETIVO: Embora os psicotrópicos sejam uma das classes de medicações mais prescritas em abrigos para idosos, os estudos avaliando o seu padrão de prescrição são limitados em número e escopo. Este estudo visou investigar os fatores associados ao uso de psicofármacos em um abrigo para idosos no Brasil. TIPO DE ESTUDO E LOCAL: Estudo retrospectivo observacional realizado no Abrigo da Velhice de Rio Claro, Instituto de Biociências, Universidade Estadual Paulista. MÉTODOS: Dados sobre prescrições foram extraídos dos prontuários médicos dos 108 idosos moradores do abrigo. Sessenta e cinco sujeitos (idade média ± desvio padrão = 74,5 ± 9,4 anos), em uso regular de medicação, constituíram a amostra. Foram examinados os efeitos das variáveis sociodemográficas e clínicas sobre o padrão de prescrição de psicofármacos. RESULTADOS: As mulheres recebiam mais psicofármacos (p = 0.038); indivíduos em uso de medicações para doenças cardiovasculares recebiam menos psicofármacos (p = 0.001). Houve correlação negativa entre número de psicofármacos prescritos e, ambos, idade (p = 0.009) e número de medicações clínicas (p = 0.009). CONCLUSÃO: Embora preliminares, os resultados indicam as doenças cardiovasculares como a variável clínica que mais influenciou a prescrição de psicofármacos. Uma excessiva precaução por parte dos clínicos pode explicar parcialmente este resultado. Novas investigações, com amostras maiores e de diferentes regiões são desejáveis para confirmação destes dados.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objetivou-se compreender a experiência relativa à morbidade materna grave, a partir de um grupo de mulheres que vivenciou esse problema. Adotaram-se os preceitos metodológicos da pesquisa qualitativa, sendo o Discurso do Sujeito Coletivo o referencial metodológico. Foram entrevistadas 16 mulheres que vivenciaram a morbidade materna grave. Os resultados foram discutidos a partir de quatro temas: descrevendo o desejo e o planejamento para ter um filho, percebendo seu problema de saúde, sua influência na gestação e para o concepto, passando pelo choque inicial no pós-parto e experienciando a situação de risco: desejos, frustrações e superação. Espera-se que este trabalho possa contribuir para qualificar a assistência de enfermagem, especialmente para reconhecer a diversidade e amplitude de necessidades que mulheres apresentam em situações de morbidade grave, durante o ciclo gravídico puerperal.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Leafcutters are the highest evolved within Neotropical ants in the tribe Attini and model systems for studying caste formation, labor division and symbiosis with microorganisms. Some species of leafcutters are agricultural pests controlled by chemicals which affect other animals and accumulate in the environment. Aiming to provide genetic basis for the study of leafcutters and for the development of more specific and environmentally friendly methods for the control of pest leafcutters, we generated expressed sequence tag data from Atta laevigata, one of the pest ants with broad geographic distribution in South America. Results: The analysis of the expressed sequence tags allowed us to characterize 2,006 unique sequences in Atta laevigata. Sixteen of these genes had a high number of transcripts and are likely positively selected for high level of gene expression, being responsible for three basic biological functions: energy conservation through redox reactions in mitochondria; cytoskeleton and muscle structuring; regulation of gene expression and metabolism. Based on leafcutters lifestyle and reports of genes involved in key processes of other social insects, we identified 146 sequences potential targets for controlling pest leafcutters. The targets are responsible for antixenobiosis, development and longevity, immunity, resistance to pathogens, pheromone function, cell signaling, behavior, polysaccharide metabolism and arginine kynase activity. Conclusion: The generation and analysis of expressed sequence tags from Atta laevigata have provided important genetic basis for future studies on the biology of leaf-cutting ants and may contribute to the development of a more specific and environmentally friendly method for the control of agricultural pest leafcutters.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coptotermes havilandi Holmgren is an oriental species introduced into Brazil. Despite its economic impact as structural pest, very little is known about the biology of this termite. This paper describes observations of C. havilandi swarming in the city of Rio Claro (SP, Brazil), and reports the first data on incipient colonies reared in a laboratory in Brazil. The preoviposition period lasted about a week after pairing; oviposition began in most of the incipient colonies during the second week. Antennal mutilation occurred on all reproductives. The mean number of the first batch of eggs was 13. In general, first instar brood hatched 60-70 days after set up of the colonies. After two years of pairing there was a small population (less than 100 individuals) and limited soldier production (n=2) in incipient colonies of C. havilandi.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work has as objective to demonstrate technical and economic viability of hydrogen production utilizing glycerol. The volume of this substance, which was initially produced by synthetic ways (from oil-derived products), has increased dramatically due mainly to biodiesel production through transesterification process which has glycerol as main residue. The surplus amount of glycerol has been generally utilized to feed poultry or as fuel in boilers, beyond other applications such as production of soaps, chemical products for food industry, explosives, and others. The difficulty to allocate this additional amount of glycerol has become it in an enormous environment problem, in contrary to the objective of biodiesel chain, which is to diminish environmental impact substituting oil and its derivatives, which release more emissions than biofuels, do not contribute to CO2-cycle and are not renewable sources. Beyond to utilize glycerol in combustion processes, this material could be utilized for hydrogen production. However, a small quantity of works (theoretical and experimental) and reports concerning this theme could be encountered. Firstly, the produced glycerol must be purified since non-reacted amounts of materials, inclusively catalysts, contribute to deactivate catalysts utilized in hydrogen production processes. The volume of non-reacted reactants and non-utilized catalysts during transesterification process could be reutilized. Various technologies of thermochemical generation of hydrogen that utilizes glycerol (and other fuels) were evaluated and the greatest performances and their conditions are encountered as soon as the most efficient technology of hydrogen production. Firstly, a physicochemical analysis must be performed. This step has as objective to evaluate the necessary amount of reactants to produce a determined volume of hydrogen and determine thermodynamic conditions (such as temperature and pressure) where the major performances of hydrogen production could be encountered. The calculations are based on the process where advance degrees are found and hence, fractions of products (especially hydrogen, however, CO2, CO, CH4 and solid carbon could be also encountered) are calculated. To produce 1 Nm3/h of gaseous hydrogen (necessary for a PEMFC - Proton Exchange Membrane Fuel Cell - containing an electric efficiency of about 40%, to generate 1 kWh), 0,558 kg/h of glycerol is necessary in global steam reforming, 0,978 kg/h of glycerol in partial oxidation and cracking processes, and 0,782 kg/h of glycerol in autothermal reforming process. The dry reforming process could not be performed to produce hydrogen utilizing glycerol, in contrary to the utilization of methane, ethanol, and other hydrocarbons. In this study, steam reforming process was preferred due mainly to higher efficiencies of production and the need of minor amount of glycerol as cited above. In the global steam reforming of glycerine, for one mole of glycerol, three moles of water are necessary to produce three moles of CO2 and seven moles of H2. The response reactions process was utilized to predict steam reforming process more accurately. In this mean, the production of solid carbon, CO, and CH4, beyond CO2 and hydrogen was predicted. However, traces of acetaldehyde (C2H2), ethylene (C2H4), ethylene glycol, acetone, and others were encountered in some experimental studies. The rates of determined products obviously depend on the adopted catalysts (and its physical and chemical properties) and thermodynamic conditions of hydrogen production. Eight reactions of steam reforming and cracking were predicted considering only the determined products. In the case of steam reforming at 600°C, the advance degree of this reactor could attain its maximum value, i.e., overall volume of reactants could be obtained whether this reaction is maintained at 1 atm. As soon as temperature of this reaction increases the advance degree also increase, in contrary to the pressure, where advance degree decrease as soon as pressure increase. The fact of temperature of reforming is relatively small, lower costs of installation could be attained, especially cheaper thermocouples and smaller amount of thermo insulators and materials for its assembling. Utilizing the response reactions process in steam reforming, the predicted volumes of products, for the production of 1 Nm3/h of H2 and thermodynamic conditions as cited previously, were 0,264 kg/h of CO (13% of molar fraction of reaction products), 0,038 kg/h of CH4 (3% of molar fraction), 0,028 kg/h of C (3% of molar fraction), and 0,623 kg/h of CO2 (20% of molar fraction). Through process of water-gas shift reactions (WGSR) an additional amount of hydrogen could be produced utilizing mainly the volumes of produced CO and CH4. The overall results (steam reforming plus WGSR) could be similar to global steam reforming. An attention must to be taking into account due to the possibility to produce an additional amount of CH4 (through methanation process) and solid carbon (through Boudouard process). The production of solid carbon must to be avoided because this reactant diminishes (filling the pores) and even deactivate active area of catalysts. To avoid solid carbon production, an additional amount of water is suggested. This method could be also utilized to diminish the volume of CO (through WGSR process) since this product is prejudicial for the activity of low temperature fuel cells (such as PEMFC). In some works, more three or even six moles of water are suggested. A net energy balance of studied hydrogen production processes (at 1 atm only) was developed. In this balance, low heat value of reactant and products and utilized energy for the process (heat supply) were cited. In the case of steam reforming utilizing response reactions, global steam reforming, and cracking processes, the maximum net energy was detected at 700°C. Partial oxidation and autothermal reforming obtained negative net energy in all cited temperatures despite to be exothermic reactions. For global steam reforming, the major value was 114 kJ/h. In the case of steam reforming, the highest value of net energy was detected in this temperature (-170 kJ/h). The major values were detected in the cracking process (up to 2586 kJ/h). The exergetic analysis has as objective, associated with physicochemical analysis, to determine conditions where reactions could be performed at higher efficiencies with lower losses. This study was performed through calculations of exergetic and rational efficiencies, and irreversibilities. In this analysis, as in the previously performed physicochemical analysis, conditions such as temperature of 600°C and pressure of 1 atm for global steam reforming process were suggested due to lower irreversibility and higher efficiencies. Subsequently, higher irreversibilities and lower efficiencies were detected in autothermal reforming, partial oxidation and cracking process. Comparing global reaction of steam reforming with more-accurate steam reforming, it was verified that efficiencies were diminished and irreversibilities were increased. These results could be altered with introduction of WGSR process. An economic analysis could be performed to evaluate the cost of generated hydrogen and determine means to diminish the costs. This analysis suggests an annual period of operation between 5000-7000 hours, interest rates of up to 20% per annum (considering Brazilian conditions), and pay-back of up to 20 years. Another considerations must to be take into account such as tariffs of utilized glycerol and electricity (to be utilized as heat source and (or) for own process as pumps, lamps, valves, and other devices), installation (estimated as US$ 15.000 for a plant of 1 Nm3/h) and maintenance cost. The adoption of emission trading schemes such as carbon credits could be performed since this is a process with potential of mitigates environment impact. Not considering credit carbons, the minor cost of calculated H2 was 0,16288 US$/kWh if glycerol is also utilized as heat sources and 0,17677 US$/kWh if electricity is utilized as heat sources. The range of considered tariff of glycerol was 0-0,1 US$/kWh (taking as basis LHV of H2) and the tariff of electricity is US$ 0,0867 US$/kWh, with demand cost of 12,49 US$/kW. The costs of electricity were obtained by Companhia Bandeirante, localized in São Paulo State. The differences among costs of hydrogen production utilizing glycerol and electricity as heat source was in a range between 0,3-5,8%. This technology in this moment is not mature. However, it allows the employment generation with the additional utilization of glycerol, especially with plants associated with biodiesel plants. The produced hydrogen and electricity could be utilized in own process, increasing its final performance.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A century after the discovery of Chagas disease, it is still one of the most important parasitic diseases affecting humans. The subfamily Triatominae is important in medical health, because these insects are vectors of Trypanosoma cruzi, the etiologic agent of Chagas disease. These insects are also of important cytological relevance because they have particular cell characteristics, such as persistence of nucleolar material in spermatogenesis. The germ cells of the animal kingdom have chromatoid bodies (CBs) in their cytoplasm that can originate from nucleolar material that is fragmented in the early stages of spermatogenesis and plays an important role in cellular communication between the spermatids during spermiogenesis. Currently, there are few studies on the function and formation of the CB in nucleologenesis, especially with emphasis on the ultrastructure of the cells involved in spermatogenesis of insects. Considering the importance of knowledge about the triatomine fauna, we conducted a study of the biogeography and reports of these insects and a survey of patients with Chagas disease in the northwestern region of São Paulo State. Data collected from 1995 to 2009 indicated 700 individuals with Chagas disease, demonstrating a range of 0 to 40 years, which shows that the disease may be active in this region. Moreover, of the 1150 patients treated for cardiomyopathy, 44% were chagasic. Regarding the triatomines noted and captured in the period from 2004 to 2009, the species were Triatoma sordida and Rhodnius neglectus, with T. sordida being the most abundant. In addition, some triatomines were infected by T. cruzi in various developmental stages. We also analyzed the nucleolar cycle and fibrillarin nucleolar protein expression in CB of spermatogenic cells of T. infestans and T. sordida, using histological, ultrastructural and immunocytochemical techniques. The results revealed fibrillarin nucleolar protein expression in the nucleus and in some cytoplasmic spots of germ cells during spermatogenesis in triatomines. These data suggest that fibrillarin could be a constituent of CB, which was most likely derived from nucleolar fragmentation. This is the first time that fibrillarin protein expression has been shown in CB during spermatogenesis progression in triatomines. Knowledge about the biology of triatomines was deepened in this study and, in particular, the structural and ultrastructural aspects of spermatogenesis in triatomines. This study showed that the disease may be active in the northwestern region of São Paulo and expanded our knowledge of the biology of triatomines, the main vectors of Chagas disease. © FUNPEC-RP.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The present study provides the distribution map and reports new records of the gymnophthalmid lizard Leposoma osvaldoi Avila-Pires, 1995, from Mato Grosso state, Brazil, extending the known geographical distribution of the species ca. 42 km northeastern in straight line from the nearest record in the state. © 2011 Check List and Authors.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em História - FCHS