935 resultados para Nonequilibrium Growth Model
Resumo:
Fish are an important part of a healthy diet since they contain high quality protein, but typically present a low fat percent when compared to other meats. Fish is an extremely perishable food commodity. On the other hand, food borne diseases are still a major problem in the world, even in well-developed countries. The increasing incidence of food borne diseases coupled with the resultant social and economic implications means there is a constant striving to produce safer food and to develop new antimicrobial agents concerns over the safety of some chemical preservatives and negative consumer reactions to preservatives they perceive as chemical and artificial, have prompted on increased interest in more ‘‘naturalgreen’’ alternatives for the maintenance or extension of product shelf-life. Particular interest has focused on the potential applications of plant essential oils. However, to establish the usefulness of natural antimicrobial preservatives, they must be evaluated alone and in combination with other preservation factors to determine whether there are synergistic effects and multiple hurdles can be devised. In this study, were evaluated the effects of different concentrations of Rosmarinus officinalis and nisin and storage time (15 days) on growth of Streptococcus iniae GQ850377 in a lab conditions and a food model system (fillets of rainbow trout) in 4 and 8 °C. In addition, we also studied multi factorial effects of four different concentration of rosemary, three different concentrations of nisin, two different levels of pH in 3 temperature 4,15 and 37 °C on log% of S.iniae during 43 days in BHI broth. The results on growth of S. iniae were evaluated using SPSS 20.0 statistical software and analyzed the logarithm of total count of the bacterial by Tukey Test. Results were considered statistically significant when P<0.05. MIC and MBC values of rosemary and nisin were 0.03, 0.075 % and 5, 40 μg/mL, respectively. The growth of S. iniae was effected significantly (P<0.05) by rosemary and nisin and also combination of rosemary and nisin in 4 and 8 °C. Samples treated with 0.135 and 0.405 % of rosemary showed a significant decrease on the growth of the bacteria compared with control sample(P<0.05). The most ١٤٦ inhibitory effects were seen in samples treated with 0.135 and 0.405% of rosemary until 9 days after storage. Also, the synergism effects of rosemary and nisin on the growth rate of bacteria was significant (P<0.05) compared with untreated samples and samples treated with the rosemary or nisin, only. Synergistic effects was observed at concentration of 0.405% rosemary and 0.75 μg/mL nisin in both temprature. Results of this study showed that different concentration of rosemary a significant inhibitory effect (P<0.05) on log% of S. iniae, in BHI broth in pH 5.5 and 7 in 4,15 and 37 °C during 43 days. In concentration of 0% rosemary (control) in pH 5.5 and 7 and 37°C, log% were 1.099 and 3.15, whereas in concentration of 0.015% rosemary were -4/241 and 1.454, respectively. The use of essential oils may improve food safety and overall microbial quality. If essential oils were to be more widely applied as antibacterials in foods, the organoleptic impact would be important. In addition, it is recommended to apply essential oils or their compounds as part of a hurdle system and to use it as an antimicrobial component along with other preservation techniques. Thus essential of R. officinalis with high antibacterial activity selected in this study could be a potential source for inhibitory substances against some food-borne pathogens and they may be candidates for using in foods or food-processing systems.
Resumo:
There is an increasing demand in developing newer and safer methods in preserving food products.Among which herbal additives seem to attract evermore attention recently.the major advantage of herbal additives is due to their favorable aroma besides their antimicrobial effects and less expensive than chemical additives. Zataria multiflora Boiss is a native Iranian herb which is used vastly as a food preserver essential oils and also medical usage. Metabolites of harmless bacteria, such as Nisin are also known to be safe preservatives that have antimicrobial activity. However to establish the usefulness of natural antimicrobial preservatives, they must be evaluated alone and in combination with other preservation factors to determine whether there are synergistic effects in rigid media . In this study were evaluated the effects of different concentrations of Zataria multiflora (EO 0, 0.005, 0.015, 0.045, 0.135, 0.405 ,0.810 %) and Nisin(0, 0.15, 0.25, 0.75 μg/ml) and Storage time (up to 21 days) on growth of Staphylococcus aureus ATCC 6538 in a food model system(light salted fish of silver carp, Hypophthalmichthys molitrix). The results on growth of S. aureus were evaluated using SPSS 15.0 statistical software (SPSS 15.0 for windows, SPSS Inc.) and analyzed the logarithm of total count of the bacteria by Tukey Test. Results were considered statistically significant when P≤0.05. The growth of Staphylococcus aureus was affected significantly(P<0.05) by EO and Nisin and also combinations of EO and Nisin. Samples treated with 0.135, 0.405 and 0.810% of thyme essential oil showed a significant decrease on the growth of the bacteria compared with an treated samples(P<0.05). No significant difference was seen on the growth of S.aureus in samples treated with lower concentrations of Z.multiflora(below 0.045%) and untreated group(P>0.05). The most inhibitory effects were seen in samples treated with 0.405% and 0.810% of thyme essential oil until 9 and 12 days after storage,respectively. Also there was significant inhibtory effect(P<0.05) in different concentration of nisin on the organism compared with an treated samples. The synergism effects of the Eo and nisin on the growth rate of the bacteria was significant (P<0.05) compared with untreated samples and samples treated with the Eo or nisin, only. Synergismic effects was observed at concentration of 0.405 and 0.810% of Z. multiflora essential oil with 0.25 μg/ml Nisin, respectively until 15 days after storage. As expected it is preferred to apply the least possible amounts of additives in food preserving that not only are effective and safe but are economically justifiable.
Resumo:
We report on the growth of single-walled carbon nanotubes from a monometallic Co catalyst on an oxidized Si wafer support by the most simple growth recipe (vacuum annealing, growth by undiluted C 2H 2). Nevertheless, multiwavelength Raman spectroscopy and transmission electron spectroscopy show a remarkable selectivity for chiral indices and thus, e.g., high abundance with a single chirality representing 58% of all semiconducting tubes. In situ x-ray photoelectron spectroscopy monitors the catalyst chemistry during carbon nanotube growth and shows interfacial Co-Si interactions that may help to stabilize the nanoparticle/nanotube diameter. We outline a two-mechanism model explaining the selective growth. © 2012 American Physical Society.
Resumo:
The pressure oscillation within combustion chambers of aeroengines and industrial gas turbines is a major technical challenge to the development of high-performance and low-emission propulsion systems. In this paper, an approach integrating computational fluid dynamics and one-dimensional linear stability analysis is developed to predict the modes of oscillation in a combustor and their frequencies and growth rates. Linear acoustic theory was used to describe the acoustic waves propagating upstream and downstream of the combustion zone, which enables the computational fluid dynamics calculation to be efficiently concentrated on the combustion zone. A combustion oscillation was found to occur with its predicted frequency in agreement with experimental measurements. Furthermore, results from the computational fluid dynamics calculation provide the flame transfer function to describe unsteady heat release rate. Departures from ideal one-dimensional flows are described by shape factors. Combined with this information, low-order models can work out the possible oscillation modes and their initial growth rates. The approach developed here can be used in more general situations for the analysis of combustion oscillations. Copyright © 2012 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.
Resumo:
The unique response of ferroic materials to external excitations facilitates them for diverse technologies, such as nonvolatile memory devices. The primary driving force behind this response is encoded in domain switching. In bulk ferroics, domains switch in a two-step process: nucleation and growth. For ferroelectrics, this can be explained by the Kolmogorov-Avrami-Ishibashi (KAI) model. Nevertheless, it is unclear whether domains remain correlated in finite geometries, as required by the KAI model. Moreover, although ferroelastic domains exist in many ferroelectrics, experimental limitations have hindered the study of their switching mechanisms. This uncertainty limits our understanding of domain switching and controllability, preventing thin-film and polycrystalline ferroelectrics from reaching their full technological potential. Here we used piezoresponse force microscopy to study the switching mechanisms of ferroelectric-ferroelastic domains in thin polycrystalline Pb 0.7Zr0.3TiO3 films at the nanometer scale. We have found that switched biferroic domains can nucleate at multiple sites with a coherence length that may span several grains, and that nucleators merge to form mesoscale domains, in a manner consistent with that expected from the KAI model. © 2012 American Physical Society.
Resumo:
The composite nature of mineralized natural materials is achieved through both the microstructural inclusion of an organic component and an overall microstructure that is controlled by templating onto organic macromolecules. A modification of an existing laboratory technique is developed for the codeposition of a CaCO3-gelatin composite with a controllable organic content. First, calibration curves are developed to determine the organic content of a CaCO3-gelatin composite from infrared spectra. Second, a CaCO3-gelatin composite is deposited on either glass coverslips or demineralized eggshell membranes using an automated alternating soaking process. Electron microscopy images and use of the infrared spectra calibration curves show that by altering the amount of gelatin in the ionic growth solutions, the final organic component of the mineral can be regulated over the range of 1-10%, similar to that of natural eggshell. © 2012 Materials Research Societ.
Resumo:
Several agencies in the United Kingdom have interest in the water quality of old navigational canals that have fallen into disuse after the decline of commercial canal transportation. The interested agencies desired a model to predict the water quantity and quality of inland navigational canals in order to evaluate management options to address the issues in the natural streams to which they discharge. Inland navigational canals have unique drivers of their hydrology and water quality compared to either natural streams, irrigation canals, or larger navigational canals connected to seas or oceans. Water in an inland canal is typically sourced from a reservoir and artificially pumped to a summit reach; its movement downhill is controlled by the activity of boats and overflow weirs. Stagnant impoundments between locks, which might normally be expected to result in a decrease in the concentration of sediment-associated pollutants, actually have surprisingly high levels of sediment due to boat traffic. Algal growth in the stagnant reach can be high. This paper describes a canal model developed to simulate hydrology and water quality in inland navigational canals. This model was successfully applied to the Kennet and Avon Canal to predict hydrology, sediment generation and transport, and algal growth and transport. The model is responsive to external influences such as sunlight, temperature, nutrient concentrations, boat traffic, and runoff from the contributing catchment area.
Resumo:
Controlling the crystallographic phase purity of III-V nanowires is notoriously difficult, yet this is essential for future nanowire devices. Reported methods for controlling nanowire phase require dopant addition, or a restricted choice of nanowire diameter, and only rarely yield a pure phase. Here we demonstrate that phase-perfect nanowires, of arbitrary diameter, can be achieved simply by tailoring basic growth parameters: temperature and V/III ratio. Phase purity is achieved without sacrificing important specifications of diameter and dopant levels. Pure zinc blende nanowires, free of twin defects, were achieved using a low growth temperature coupled with a high V/III ratio. Conversely, a high growth temperature coupled with a low V/III ratio produced pure wurtzite nanowires free of stacking faults. We present a comprehensive nucleation model to explain the formation of these markedly different crystal phases under these growth conditions. Critical to achieving phase purity are changes in surface energy of the nanowire side facets, which in turn are controlled by the basic growth parameters of temperature and V/III ratio. This ability to tune crystal structure between twin-free zinc blende and stacking-fault-free wurtzite not only will enhance the performance of nanowire devices but also opens new possibilities for engineering nanowire devices, without restrictions on nanowire diameters or doping.
Resumo:
This paper presents a comparison between theoretical predictions and experimental results from a pin-on-disc test rig exploring friction-induced vibration. The model is based on a linear stability analysis of two systems coupled by sliding contact at a single point. Predictions are compared with a large volume of measured squeal initiations that have been post-processed to extract growth rates and frequencies at the onset of squeal. Initial tests reveal the importance of including both finite contact stiffness and a velocity-dependent dynamic model for friction, giving predictions that accounted for nearly all major clusters of squeal initiations from 0 to 5 kHz. However, a large number of initiations occurred at disc mode frequencies that were not predicted with the same parameters. These frequencies proved remarkably difficult to destabilise, requiring an implausibly high coefficient of friction. An attempt has been made to estimate the dynamic friction behaviour directly from the squeal initiation data, revealing complex-valued frequency-dependent parameters for a new model of linearised dynamic friction. These new parameters readily destabilised the disc modes and provided a consistent model that could account for virtually all initiations from 0 to 15 kHz. The results suggest that instability thresholds for a wide range of squeal-type behaviour can be predicted, but they highlight the central importance of a correct understanding and accurate description of dynamic friction at the sliding interface. © 2013 Elsevier Ltd. All rights reserved.
Resumo:
Peripheral nerve damage is a problem encountered after trauma and during surgery and the development of synthetic polymer conduits may offer a promising alternative to autografts. In order to improve the performance of the polymer to be used for nerve conduits, poly-ε-caprolactone (PCL) films were chemically functionalized with RGD moieties, using a chemical reaction previously developed. In vitro cultures of dissociated dorsal root ganglion (DRG) neurons provide a valid model to study different factors affecting axonal growth. In this work, DRG neurons were cultured on RGD-functionalized PCL films. Adult adipose-derived stem cells differentiated to Schwann cells (dASCs) were initially cultured on the functionalized PCL films, resulting in improved attachment and proliferation. dASCs were also co-cultured with DRG neurons on treated and untreated PCL to assess stimulation by dASCs on neurite outgrowth. Neuron response was generally poor on untreated PCL films, but long neurites were observed in the presence of dASCs or RGD moieties. A combination of the two factors enhanced even further neurite outgrowth, acting synergistically. Finally, in order to better understand the extracellular matrix (ECM)-cell interaction, a β1 integrin blocking experiment was carried out. Neurite outgrowth was not affected by the specific antibody blocking, showing that β1 integrin function can be compensated by other molecules present on the cell membrane. Copyright © 2013 John Wiley & Sons, Ltd.
Resumo:
Ptychobarbus dipogon is an endemic fish in the Yarlung Tsangpo River, but its biology is poorly known. We sampled 582 specimens (total length, TL, between 70.6 and 593.0 mm) from April 2004 to August 2006 in the Lhasa River, Tibet. We estimated ages based on the counts of alternating opaque and translucent zones (annuli) in thin transverse sections of lapilli otoliths. Ages ranged from 1(+) to 23(+) years for males and 1(+) to 44(+) for females. The observed 44(+) years was the oldest reported for schizothoracine fishes. Females attained a larger size than males. The TL weight relationship was W=7.12 x 10(-6)TL(3.006) for combined sexes. The growth parameters fitted von Bertalanffy growth functions were L-infinity = 598.66 mm, k=0.0898 year(-1), t(0)=-0.7261 year and W-infinity = 1585.38 g for females and L-infinity = 494.23mm, k=0.1197 year(-1), t(0)=-0.7296 year and W-infinity = 904.88g for males. The longevities of 32.7 year for females and 24.3 year for males were similar to the observed ages. Using an empirical model we estimated the instantaneous rate of total mortality (Z) at 0.28 per year in the lower reaches. Z in the upper and middle stocks was close to the M because of unexploited or lightly exploited stock. Protracted longevity, slow growth, low natural mortality and large body size were typical characteristics of P. dipogon. The current declining trend of P. dipogon could be prevented by altering fishing regulations.
Resumo:
Ghrelin, a multifunctional hormone, including potent GH stimulation activity, has been suggested to be important during embryonic development. Expression of ghrelin has been confirmed in the zebrafish pancreas during embryonic stages. Interfering with ghrelin function using two specific antisense morpholino oligonucleotides causes defects during zebrafish embryonic development. In ghrelin morphants the expression of GH was abolished in zebrafish somatotropes, whereas the expression patterns of the other key molecules involved in hypothalamic-pituitary development and distinct pituitary hormones genes remain largely intact at the appropriate time during zebrafish adenohypophysis development. Effective rescue of the ghrelin morphants with exogenous ghrelin mRNA showed that the correct gene had been targeted. Moreover, by analyzing the efficiencies of the ghrelin morphants rescue experiments with various forms of exogenous mutant ghrelin mRNAs, we also demonstrated the essentiality of the form acyl-ghrelin on GH stimulation during zebrafish adenohypophysis development. Our in vivo experiments, for the first time, also provided evidence of the existence of functional obestatin in the C-terminal part of zebrafish proghrelin peptides. Our research here has demonstrated that zebrafish is a unique model for functional studies of endogenous ghrelin, especially during embryonic development. (Endocrinology 150: 2767-2774, 2009)
Resumo:
A twin-plane based nanowire growth mechanism is established using Au catalyzed Ge nanowire growth as a model system. Video-rate lattice-resolved environmental transmission electron microscopy shows a convex, V-shaped liquid catalyst-nanowire growth interface for a ⟨112⟩ growth direction that is composed of two Ge {111} planes that meet at a twin boundary. Unlike bulk crystals, the nanowire geometry allows steady-state growth with a single twin boundary at the nanowire center. We suggest that the nucleation barrier at the twin-plane re-entrant groove is effectively reduced by the line energy, and hence the twin acts as a preferential nucleation site that dictates the lateral step flow cycle which constitutes nanowire growth.
Resumo:
In order to improve algal biofuel production on a commercial-scale, an understanding of algal growth and fuel molecule accumulation is essential. A mathematical model is presented that describes biomass growth and storage molecule (TAG lipid and starch) accumulation in the freshwater microalga Chlorella vulgaris, under mixotrophic and autotrophic conditions. Biomass growth was formulated based on the Droop model, while the storage molecule production was calculated based on the carbon balance within the algal cells incorporating carbon fixation via photosynthesis, organic carbon uptake and functional biomass growth. The model was validated with experimental growth data of C. vulgaris and was found to fit the data well. Sensitivity analysis showed that the model performance was highly sensitive to variations in parameters associated with nutrient factors, photosynthesis and light intensity. The maximum productivity and biomass concentration were achieved under mixotrophic nitrogen sufficient conditions, while the maximum storage content was obtained under mixotrophic nitrogen deficient conditions.
Resumo:
Growth, nitrogen and carbohydrate metabolism in relation to eutrophication were studied for a submerged plant Potamogeton maackianus, a species common in East Asian shallow lakes. The plants were grown in six NH4+-N concentrations (0.05, 0.50, 1.00, 3.50, 5.00 and 10.00 mg/L) for six days. NH4+-N levels in excess of 0.50 mg/L inhibited the plant growth. The relationships between external NH4+-N availability and total nitrogen (TN), protein-N, free amino acid-N (FAA-N) and NH4+-N in plant tissues, respectively, conformed to a logarithmic model suggesting that a feedback inhibition mechanism may exist for ammonium uptake. The response of starch to NH4+-N was fitted with a negative, logarithmic curve. Detailed analysis revealed that the influx NH4+-N had been efficiently incorporated into organic-N and eventually stored as protein at the expense of starch accumulation. These data suggest that this species may be able to tolerate high levels of ammonium when dissolved oxygen is sufficient.