Partition alignment in three dimensional unstructured mesh multi-physics modelling

Unstructured mesh codes for modelling continuum physics phenomena have evolved to provide the facility to model complex interacting systems. Parallelisation of such codes using single Program Multi Data (SPMD) domain decomposition techniques implemented with message passing has been demonstrated to provide high parallel efficiency, scalability to large numbers of processors P and portability across a wide range of parallel platforms. High efficiency, especially for large P requires that load balance is achieved in each parallel loop. For a code in which loops span a variety of mesh entity types, for example, elements, faces and vertices, some compromise is required between load balance for each entity type and the quantity of inter-processor communication required to satisfy data dependence between processors.

Vocabulary and language model adaptation using information retrieval

International audience

Information and Communication Technologies (ICT) to Improve Prescription Appropriateness and Therapy Adherence in the Multi-morbid Elderly

Multimorbidity patients pose severe challenges to which information and communication technology (ICT) can help patients and doctors to answer with effective and efficient care.

Predicting Pollicipes pollicipes (Crustacea: Cirripedia) abundance on intertidal rocky shores of SW Portugal: a multi-scale approach based on a simple fetch-based wave exposure index

Understanding and predicting patterns of distribution and abundance of marine resources is important for con- servation and management purposes in small-scale artisanal fisheries and industrial fisheries worldwide. The goose barnacle (Pollicipes pollicipes) is an important shellfish resource and its distribution is closely related to wave exposure at different spatial scales. We modelled the abundance (percent coverage) of P. pollicipes as a function of a simple wave exposure index based on fetch estimates from digitized coastlines at different spatial scales. The model accounted for 47.5% of the explained deviance and indicated that barnacle abundance increases non-linearly with wave exposure at both the smallest (metres) and largest (kilometres) spatial scales considered in this study. Distribution maps were predicted for the study region in SW Portugal. Our study suggests that the relationship between fetch-based exposure indices and P. pollicipes percent cover may be used as a simple tool for providing stakeholders with information on barnacle distribution patterns. This information may improve assessment of harvesting grounds and the dimension of exploitable areas, aiding management plans and support- ing decision making on conservation, harvesting pressure and surveillance strategies for this highly appreciated and socio- economically important marine resource.

Multi-class sentiment analysis using a hierarchical logistic model tree approach

En este trabajo se propone un nuevo sistema híbrido para el análisis de sentimientos en clase múltiple basado en el uso del diccionario General Inquirer (GI) y un enfoque jerárquico del clasificador Logistic Model Tree (LMT). Este nuevo sistema se compone de tres capas, la capa bipolar (BL) que consta de un LMT (LMT-1) para la clasificación de la polaridad de sentimientos, mientras que la segunda capa es la capa de la Intensidad (IL) y comprende dos LMTs (LMT-2 y LMT3) para detectar por separado tres intensidades de sentimientos positivos y tres intensidades de sentimientos negativos. Sólo en la fase de construcción, la capa de Agrupación (GL) se utiliza para agrupar las instancias positivas y negativas mediante el empleo de 2 k-means, respectivamente. En la fase de Pre-procesamiento, los textos son segmentados por palabras que son etiquetadas, reducidas a sus raíces y sometidas finalmente al diccionario GI con el objetivo de contar y etiquetar sólo los verbos, los sustantivos, los adjetivos y los adverbios con 24 marcadores que se utilizan luego para calcular los vectores de características. En la fase de Clasificación de Sentimientos, los vectores de características se introducen primero al LMT-1, a continuación, se agrupan en GL según la etiqueta de clase, después se etiquetan estos grupos de forma manual, y finalmente las instancias positivas son introducidas a LMT-2 y las instancias negativas a LMT-3. Los tres árboles están entrenados y evaluados usando las bases de datos Movie Review y SenTube con validación cruzada estratificada de 10-pliegues. LMT-1 produce un árbol de 48 hojas y 95 de tamaño, con 90,88% de exactitud, mientras que tanto LMT-2 y LMT-3 proporcionan dos árboles de una hoja y uno de tamaño, con 99,28% y 99,37% de exactitud,respectivamente. Los experimentos muestran que la metodología de clasificación jerárquica propuesta da un mejor rendimiento en comparación con otros enfoques prevalecientes.

The Role of Attachment in a Social Cognitive Model of Social Domain Satisfaction in College Students

The study examined a modified social cognitive model of domain satisfaction (Lent, 2004). In addition to social cognitive variables and trait positive affect, the model included two aspects of adult attachment, attachment anxiety and avoidance. The study extended recent research on well-being and satisfaction in academic, work, and social domains. The adjusted model was tested in a sample of 454 college students, in order to determine the role of adult attachment variables in explaining social satisfaction, above and beyond the direct and indirect effects of trait positive affect. Confirmatory factor analysis found support for 8 correlated factors in the modified model: social domain satisfaction, positive affect, attachment avoidance, attachment anxiety, social support, social self-efficacy, social outcome expectations, and social goal progress. Three alternative structural models were tested to account for the ways in which attachment anxiety and attachment avoidance might relate to social satisfaction. Results of model testing provided support for a model in which attachment avoidance produced only an indirect path to social satisfaction via self-efficacy and social support. Positive affect, avoidance, social support, social self-efficacy, and goal progress each produced significant direct or indirect paths to social domain satisfaction, though attachment anxiety and social outcome expectations did not contribute to the predictive model. Implications of the findings regarding the modified social cognitive model of social domain satisfaction were discussed.

Infomobility for “Car-Driver” Systems: Reference Model and Case Study

Part 21: Mobility and Logistics

Carrier Selection for Multi-commodity Flow Optimization in Cooperative Environments

Part 18: Optimization in Collaborative Networks

Defining efficient policies in a general equilibrium model: a multi-objective approach

Macroeconomic policy makers are typically concerned with several indicators of economic performance. We thus propose to tackle the design of macroeconomic policy using Multicriteria Decision Making (MCDM) techniques. More specifically, we employ Multiobjective Programming (MP) to seek so-called efficient policies. The MP approach is combined with a computable general equilibrium (CGE) model. We chose use of a CGE model since they have the dual advantage of being consistent with standard economic theory while allowing one to measure the effect(s) of a specific policy with real data. Applying the proposed methodology to Spain (via the 1995 Social Accounting Matrix) we first quantified the trade-offs between two specific policy objectives: growth and inflation, when designing fiscal policy. We then constructed a frontier of efficient policies involving real growth and inflation. In doing so, we found that policy in 1995 Spain displayed some degree of inefficiency with respect to these two policy objectives. We then offer two sets of policy recommendations that, ostensibly, could have helped Spain at the time. The first deals with efficiency independent of the importance given to both growth and inflation by policy makers (we label this set: general policy recommendations). A second set depends on which policy objective is seen as more important by policy makers: increasing growth or controlling inflation (we label this one: objective-specific recommendations).

A multi-sectoral version of the Post-Keynesian growth model

Neste artigo, pretende-se desenvolver uma versão desagregada da abordagem pós-Keynesiana para o crescimento econômico, mostrando que de fato esse modelo pode ser tratado como um caso particular do modelo Pasinettiano de mudança estrutural e crescimento econômico. Utilizando-se o conceito de integração vertical, torna-se possível conduzir a análise iniciada por Kaldor (1956) e Robinson (1956, 1962), e seguido por Dutt (1984), Rowthorn (1982) e, posteriormente, Bhaduri e Marglin (1990) em um modelo multi-sectorial em que há aumentos da demanda e produtividade em ritmos diferentes em cada setor. Ao adotar essa abordagem, é possível mostrar que a dinâmica de mudança estrutural está condicionada não apenas aos padrões de demanda de evolução das preferências e da difusão do progresso tecnológico, mas também com as características distributivas da economia, que podem dar origem a diferentes regimes setoriais de crescimento econômico. Além disso, é possível determinar a taxa natural de lucro que faz com que a taxa de mark-up seja constante ao longo do tempo. _________________________________________________________________________________ ABSTRACT

Collaborative Networked Organizations as System of Systems: A Model-Based Engineering Approach

Part 6: Engineering and Implementation of Collaborative Networks

Multi-sensor Cloud and Aerosol Retrieval Simulator and Its Applications

Executing a cloud or aerosol physical properties retrieval algorithm from controlled synthetic data is an important step in retrieval algorithm development. Synthetic data can help answer questions about the sensitivity and performance of the algorithm or aid in determining how an existing retrieval algorithm may perform with a planned sensor. Synthetic data can also help in solving issues that may have surfaced in the retrieval results. Synthetic data become very important when other validation methods, such as field campaigns,are of limited scope. These tend to be of relatively short duration and often are costly. Ground stations have limited spatial coverage whilesynthetic data can cover large spatial and temporal scales and a wide variety of conditions at a low cost. In this work I develop an advanced cloud and aerosol retrieval simulator for the MODIS instrument, also known as Multi-sensor Cloud and Aerosol Retrieval Simulator (MCARS). In a close collaboration with the modeling community I have seamlessly combined the GEOS-5 global climate model with the DISORT radiative transfer code, widely used by the remote sensing community, with the observations from the MODIS instrument to create the simulator. With the MCARS simulator it was then possible to solve the long standing issue with the MODIS aerosol optical depth retrievals that had a low bias for smoke aerosols. MODIS aerosol retrieval did not account for effects of humidity on smoke aerosols. The MCARS simulator also revealed an issue that has not been recognized previously, namely,the value of fine mode fraction could create a linear dependence between retrieved aerosol optical depth and land surface reflectance. MCARS provided the ability to examine aerosol retrievals against “ground truth” for hundreds of thousands of simultaneous samples for an area covered by only three AERONET ground stations. Findings from MCARS are already being used to improve the performance of operational MODIS aerosol properties retrieval algorithms. The modeling community will use the MCARS data to create new parameterizations for aerosol properties as a function of properties of the atmospheric column and gain the ability to correct any assimilated retrieval data that may display similar dependencies in comparisons with ground measurements.