Conteúdos estruturantes de um programa de estimulação essencial: investigação em uma APAE paranaense

This study aimed to investigate the structural content of an essential stimulation program at one APAE from Parana State. his institution has been working for 43 years and it has 420 students enrolled. It was a documentary analysis of the pedagogical project of this institution, whose collection started after the approval of a local ethics committee, held with a previously developed protocol for this purpose. After the content analysis, it was possible to establish three categories related to this program operation, the conception of development present in it and place illed by language and by inclusion. he results indicated that, in order to be enrolled, children must present prenatal, neonatal and postnatal antecedents that entail problems of intellectual, motor, sensorial and language nature. he program is considered as a stage in early childhood education, but the language is not a structural content of this phase. It is a subarea of the development to be crafted with interventions directed to motor aspects of speech, breathing and communication. Finally, the concept of child development is complemented with other areas, also disjointed: sensory-perceptive; self-care; motor and social-emotional. We conclude that, although it is presented as an educational stage, in the essential stimulation of the analyzed institution, a clinical-specialized character predominates, consistent with the conceptions of development present in the document, but not with advances in relation to the concept of human development in the context of Inclusive Education and diversity.

Inclusão escolar do aluno com deficiência física: contribuições da Terapia Ocupacional

The inclusive school consists of a school that thoroughly attends the diversity and, therefore, students with special educational needs, including the ones with physical dysfunction. The objective of this study was to identify the difficulties of a teacher in the process of school inclusion of the student with physical dysfunction in order to adapt learning resources, having adequate school furniture and to guide the teacher in specific situations. A teacher of early childhood education participated in this study. For data collection two half-structuralized interviews were used. The first obtained information concerning the teacher’s difficulties due to the motor aspects of the student with difficulty to access the curriculum. The second interview gathered information about the teacher’s perception of the partnership between the occupational therapist and the teacher in the perspective of the inclusive education. The data analysis of the first interview and the student case-study allowed elaborating occupational therapy strategies to minimize these difficulties.After elaborating the strategies, a second interview was performed. The data of this interview showed that based on the analysis and adequacy of the interaction between a person’s functional demands, the task and the environment, make it possible for the student to overcome satisfactorily the inherent challenges of the educational context, and detached the importance of the partnership of the teacher and occupational therapist in the whole process. It concludes that the pupil incapacity would not have manifested if there was an adequate environment to receive him.

Influência de atividades lúdico-desportivas na realização de equoterapia em pacientes neurológicos - ensaio clínico controlado aleatorizado

Introduction: Equine therapy is a therapy that uses horses to provide the practitioner in rehabilitation aspects of motor, sensory, behavioral and social. Objective: To investigate the effect of the combination of playful activities with hippotherapy sessions on the trunk balance and range of motion. Methods: We selected 18 practitioners diagnosed with cerebral palsy were randomly divided into two groups. The group 1 held hippotherapy sessions, and group 2 held equine therapy with recreational activities and sports. Before and after treatment, the trunk control and range of motion of the practitioners were evaluated. The data were analyzed using the Student’s t-test (p <0.05). Results: There was an improvement in range of motion and balance in both groups. Conclusion: Equine therapy is an effective treatment for individuals with cerebral palsy, regardless of accomplishing it with or without recreational activities.

Equilíbrio funcional em indivíduos com doença de Parkinson e sua relação com a qualidade de vida

Introduction: Parkinson’s Disease (PD) is characterized by a set of four motor symptoms: tremor, rigidity, bradykinesia and postural instability. These defi cits may predispose individuals to limitations resulting from falls and their secondary consequences. Objective: To evaluate the functional balance and quality of life (QoL) in individuals with PD and determine whether there is correlation between performance on tests of balance with the QoL. Method: The project was referred to the Ethics Committee in Research of Universidade Estadual Paulista “Julio de Mesquita Filho” Campus de Marília and was approved under protocol number 1806/09. Participated in this study with individuals diagnosed with PD between levels one and four in the Hoen and Yahr scale. The subjects were evaluated according to functional balance and QoL, respectively by the instruments: Functional Balance Scale Berg (EEFB), Time Up and Go test (TUG), and Parkinson’s Disease Questionnaire-39 (PDQ-39). To perform the statistical analysis used the GraphPad Prism 5. To perform the correlation analysis for the variables passed normality by the Shapiro-Wilk. Since the variables were non-parametric test was used Spearman. During the analysis the statistical signifi cance level was considered p ≤ 0, 05. Results: We studied 25 individuals aged between 54 and 85 years (71.20 ± 8.50), time of diagnosis between one and 39 years (6.54 ± 7.71) disease. Moderate correlation was found between the EEFB with QoL (r =- 0.6), and TUG with QoL (r = 0.6836). Among the aspects of QoL balance showed a higher correlation with the domains “mobility” (TUG r = 0, 6768; EEFB r = -0.6155) and “Activities of daily living” (TUG r = 0, 7357, and EEFB r = -0.6521). Conclusion: Patients with Parkinson’s disease show defi cits in balance and QoL. The balance disorders have a high correlation among themselves and show how aspects of QoL.

Correlação entre equilíbrio, assimetria de passos e descarga de peso em indivíduos hemiparéticos

Introduction: Hemiparesis is the most common sequels after Stroke. One of the side effects of the motor skills evident in hemiparesis is the tendency to remain in asymmetric posture, with lower distribution of weight on the side hemiparetic, which ends up leading to a deficit in balance. This set of changes can cause an asymmetrical type of gait, marked by difference between the lengths of the steps these individuals. Objective: The purpose of this study was to analyze the balance, the discharge of weight in the lower limbs and asymmetry of steps in hemiparetic individuals and sees if there is correlation between those variables. Method: A group of 12 hemiparetic individuals (55,33 ± 8,92 years), both sex, who suffered from strokes participated. All subjects performed the assessment of bilateral discharge of weight, the length of the steps and balance (Berg Balance Scale). The results for the difference in the discharge of weight of the lower limbs, asymmetry of the step and the performance on the test of balance were analyzed using the Sperman Correlation Coefficient with a significance level of 5% (p ≤ 0.05). Results: We found a significant correlation between balance and asymmetry of the steps (R = -0.72 and p = 0007), however, found no significant correlation between discharge of weight on each leg and the symmetry of the steps (R =- 0.07 and p = 0, 81) and between discharge of weight and balance (R =- 0.08 and p = 0.79) in these hemiparetic individuals. Conclusion: Can be conclude that hemiparetic individuals of these study show deficits in balance, difference in weight between the discharge of the lower limbs and asymmetry of step and correlation between the asymmetry of the step and balance.

Influência da terapia de contensão induzida na funcionalidade do membro superior de indivíduos hemiparéticos

Introduction: The Constraint-induced Movement Therapy (CIMT) is a therapeutic program which main goal is the functional recuperation of paretic upper extremity of stroke patients with motor deficits by an intensive treatment, practice of functional repetition and wear of restriction in non-paretic during 90% of the daily hours. Objective: The aim of this study was evaluate the CIMT influence on upper extremity function of hemiparetic individuals. Method: The CIMT was provided for 3 daily hours for 10 consecutive days. Besides, patients were asked to wear a restraint dispositive on the unaffected hand during 90% of their activities daily living hours. Before and after the intervention period, 2 tests were administered to evaluate motor function, the Motor Activity Log (MAL) and the Wolf Motor Function Test (WMFT). Results: The results of MAL showed significant difference in quantity (p=0,011) and quality (p=0,016) of paretic upper extremity movements. Analysis of WMFT indicated a significant reduction of time that patients performed the tasks (p= 0,042) and a difference for quality of movement (p<0,0001). Conclusion: The present results showed that CIMT improves upper extremity function in hemiparetic individuals.

Metodologia para análise energética e exergética de uma caldeira aquatubular com queima de bagaço de cana

Pós-graduação em Engenharia Mecânica - FEB

Avaliação experimental de eficiência térmica de um recuperador de calor e caldeira em um sistema de cogeração

Pós-graduação em Engenharia Mecânica - FEB

Estudo da viabilidade técnica, econômica e ambiental da substituição de um banco de resistências elétricas de aquecedores por uma caldeira alimentada por biomassa de paletes residuais na indústria de laminação

Given the increasing demand for fossil fuels to power the engines of the global economy, and also the slow process of synthesis of oil, it becomes necessary to develop new sources of renewable energy in addition to improve promising sources that already exist, turning them competitive. Based on this, biomass is shown very promising between the most popular energy sources due to its availability, applicability, and above all, the fact of not emitting green house gases when analyzing the whole carbon cycle. In this sense, this work presents, through an environmental, technical and economic analysis, the impact in an aluminum mill of replacing the use of electricity, in one process, by a boiler fueled with biomass from waste process of packaging the finished product with pallets. Thus, besides the reduction of CO2 emissions, financial gains are targeted, since the main goal of the corporations that require such power is to maximize its profits

Seleção de motobombas para o setor sucroalcooleiro

This work has the purpose to explain how the sugar and alcohol sector works, detail all the processes which uses pumps and assist in the selection and specification of pumps attached with engines, that will make part in important industry processes in the manufacture of sugar and alcohol. A bibliographic revision about the working of sugar and alcohol sector and about pumps were made to help the analysis of a case. This case had the purpose to analyze the selected pumps that were part of a initial project of an industry which aimed a future expansion. The pumps that were selected to made part of the initial project were over dimensioned and were operating out of the best performance point, making the pumps inefficient because the expansion didn't happened. The solution was to select another pump with bigger performance and less power consumption to have a decrease in the energy consumption and in the operational costs of the industry and using the extra electric energy in the industry or selling it

Estratégias ambientais na indústria automobilística: um estudo de caso na Wolkswagen de São Carlos-SP

This research has as main objective show how the auto industry has been dealing with the environmental factor, more specifically during the production process and the support areas, and how the environmental management system is implemented, the operation and maintenance. Presents a number of actions related to the theme that has been taking by the automakers, as well as a case of the Volkswagen do Brasil engine plant, in São Carlos - SP

Análise de ciclo avançado com seqüestro de carbono

The energy is considered one of the most important elements in the human´s life providing the survival as well as the well being. Nowadays, the technologies destined to generate power burn fossil fuels which pour gases (carbon dioxide among them) that contribute to the global warming phenomenon. Several research groups and universities have been studying different methods for generating power with low carbon dioxide emissions, including the possibility of burning zero-carbon fuels. In this text, it has been put attention to the Advanced Zero Emission Power Plants (AZEP) which separate the CO2 (from the gases involved in the power generation), compress it, dehydrate it and store it in appropriate reservoirs. The goal of this study was to find a possible solution to produce CO from CO2, activated by solar energy; the reaction between CO and steam generates a syngas comprised of H2 and CO2, which can be separated by chemical and/or physical processes. The text also contains a study concerning the compressed air energy storage power plant (CAES) and come up with its modification to C[CO2]ES. This power plant stores CO2 directing it to a reverse combustion process to produce CO which is headed to a syngas reactor to produce CO2 and H2. Hydrogen is separated and carried to the thermal cycle to generate power with low carbon emissions

Avaliação dos gases de efeito estufa a partir do carvão

This paper addresses the context of emissions of Greenhouse Gases (GHG) from activities related to Coal, called fugitive emissions. The survey of factors, development, analysis, and suggestions for controlling emissions are conducted in order to reduce risks to the environment and people around it. The greenhouse gases absorb radiation, emitted by the Earth’s surface, and hinder their escape into space. This process is essential to terrestrial life. Increasing the concentration of those gases in the atmosphere has led to an increase in the terrestrial temperature. A selection of processes that emit gases and the study and development of calculations for measuring fugitive emissions applied in different sources from coal are performed. The greenhouse gases can be released from the extraction, processing, storage, and transportation of fossil fuels to the end consumer. Coal has 4 main fugitive factors: mining, post-mining, oxidation at low temperature, and uncontrolled combustion. The coal formation process produces methane (CH4) and carbon dioxide (CO2), being the methane, the main greenhouse gas from the coal mining and handling. The types of activities and the weight of each in the issuing process are observed. It is also made comparisons between the countries with the highest emissions rates. Are evaluated what has been done and what is needed to decrease emissions, for example the use of gas as an alternative fuel for energy generation

O estudo da usinagem em torneamento da superliga à base de níquel Pyromet 31v

The search for materials with higher properties and characteristics (wear resistance, oxidation, corrosion, etc.) has driven research of various materials. Among the materials that are being studied with such properties and characteristics are super alloys based on nickel which has an important role in the aeronautical, automotive, marine, production of gas turbines and now in space vehicles, rocket engineering , experimental aircraft, nuclear reactors, steam-powered plants, petrochemical and many other applications because besides having all the characteristics and properties mentioned above also have an excellent performance at high temperatures. The super alloy based on nickel studied in this work is the super alloy Pyromet 31v normally used in the manufacture of exhaust valves in common engines and diesel engines of high power by cater requirements such as mechanical strength and corrosion resistance at temperatures of approximately 815 ° C. The objective of this work is to produce results to demonstrate more specific information about the real influence of coatings on cutting tools and cutting fluids in turning and thus promote the optimization of the machining of these alloys. The super alloy Pyromet 31v was processed through turning, being performed with various machining parameters such as cutting speed, feed rate, depth in conditions of Minimum Amount of Fluid (MAF), abundant fluid, cutting tools with coating and without coating in early in his work life and with wear. After turning were obtained several samples of chips and the part generated during the machining process, was measured roughness of the material, subsequently made macrostructural analysis of the tools used order to detect possible wear and microstructural analysis of samples collected being that the latter was used for Optical Microscopy, Scanning Electron Microscopy (SEM) and ... (Complete abstract click electronic access below)

Eficiência energética em uma indústria madeireira

In wood processing industries, which use electrical equipment in the production process, in most cases these are badly scaled or operate under inadequate conditions, resulting directly in industrial energy efficiency, which proves important because besides having technological innovation, also with practices and policies, aims to decrease power consumption. So in a wiring project should take into account the variables that influence energy efficiency. Thus this work has been reviewed and subsequently calculated some of these variables, such as active power, power factor and demand for the entire industry (global) and also for specific equipment, the chipper. The network analysis was performed in a wood processing industry in the city of Taquarivaí - SP, and evaluated these variables with a network analyzer and also by analysis on energy bills, which were found in both analysis levels below those found in literature. These factors are due to poor design, improper use, storage of equipment or even by characteristic of the production process, ie, the equipment running on empty because of the volatility of production