Growth hormone for optimization of refractory heart failure treatment

It has been reported that growth hormone may benefit selected patients with congestive heart failure. A 63-year-old man with refractory congestive heart failure waiting for heart transplantation, depending on intravenous drugs (dobutamine) and presenting with progressive worsening of the clinical status and cachexia, despite standard treatment, received growth hormone replacement (8 units per day) for optimization of congestive heart failure management. Increase in both serum growth hormone levels (from 0.3 to 0.8 mg/l) and serum IGF-1 levels (from 130 to 300ng/ml) was noted, in association with clinical status improvement, better optimization of heart failure treatment and discontinuation of dobutamine infusion. Left ventricular ejection fraction (by MUGA) increased from 13 % to 18 % and to 28 % later, in association with reduction of pulmonary pressures and increase in exercise capacity (rise in peak VO2 to 13.4 and to 16.2ml/kg/min later). The patient was "de-listed" for heart transplantation. Growth hormone may benefit selected patients with refractory heart failure.

Production and extraction of polysaccharides and oligosaccharides and their use as new food additives

Polysaccharides and oligosaccharides can improve quality and enhance nutritional value of final food products due to their technological and nutritional features ranging from their capacity to improve texture to their effect as dietary fibers. For this reason, they are among the most studied ingredients in the food industry. The use of natural polysaccharides and oligosaccharides as food additives has been a reality since the food industry understood their potential technological and nutritional applications. Currently, the replacement of traditional ingredients and/or the synergy between traditional ingredients and polysaccharides and oligosaccharides are perceived as promising approaches by the food industry. Traditionally, polysaccharides have been used as thickening, emulsifying, and stabilizing agents, however, at this moment polysaccharides and oligosaccharides claim health and nutritional advantages, thus opening a new market of nutritional and functional foods. Indeed, their use as nutritional food ingredients enabled the food industry to develop a countless number of applications, e.g., fat replacers, prebiotics, dietary fiber, and antiulcer agents. Based on this, among the scientific community and food industry, in the last years many research studies and commercial products showed the possibility of using either new or already used sources (though with changed properties) of polysaccharides for the production of food additives with new and enhanced properties. The increasing interest in such products is clearly illustrated by the market figures and consumption trends. As an example, the sole market of hydrocolloids is estimated to reach $7 billion in 2018. Moreover, oligosaccharides can be found in more than 500 food products resulting in a significant daily consumption. A recent study from the Transparency Market Research on Prebiotic Ingredients Market reported that prebiotics' demand was worth $2.3 billion in 2012 and it is estimated to reach $4.5 billion in 2018, growing at a compound annual growth rate of 11.4% between 2012 and 2018. The entrance of this new generation of food additives in the market, often claiming health and nutritional benefits, imposes an impartial analysis by the legal authorities regarding the accomplishment of requirements that have been established for introducing novel ingredients/food, including new poly- and oligosaccharides. This chapter deals with the potential use of polysaccharides and oligosaccharides as food additives, as well as alternative sources of these compounds and their possible applications in food products. Moreover, the regulation process to introduce novel polysaccharides and oligosaccharides in the market as food additives and to assign them health claims is discussed.

Laser assisted extraction of pacemaker and implantable defibrillator leads

OBJECTIVE: To analyze the results of laser-assisted extraction of permanent pacemaker and defibrillator leads. METHODS: We operated upon 36 patients, whose mean age was 54.2 years, and extracted 56 leads. The reasons for extracting the leads were as follows: infection in 19 patients, elective replacement in 13, and other causes in 4 patients. The mean time of catheter placement was 7.5±5.5 years. Forty-seven leads were from pacemakers, and 9 were from defibrillators. Thirty-eight leads were in use, 14 had been abandoned in the pacemaker pocket, and 4 had been abandoned inside the venous system. RESULTS: We successfully extracted 54 catheters, obtaining a 96.4% rate of success and an 82.1% rate for complete extraction. The 2 unsuccessful cases were due to the presence of calcium in the trajectory of the lead. The mean duration of laser light application was 123.0±104.5 s, using 5,215.2±4,924.0 pulses, in a total of 24.4±24.2 cycles of application. Thirty-four leads were extracted from the myocardium with countertraction after complete progression of the laser sheath, 12 leads came loose during the progression of the laser sheath, and the remaining 10 were extracted with other maneuvers. One patient experienced cardiac tamponade after extraction of the defibrillator lead, requiring open emergency surgery. CONCLUSION: The use of the excimer laser allowed extraction of the leads with a 96% rate of success; it was not effective in 2 patients who had calcification on the lead. One patient (2.8%) had a complication that required cardiac surgery on an emergency basis.

Topological abstraction of higher-dimensional automata

Higher-dimensional automata constitute a very expressive model for concurrent systems. In this paper, we discuss ``topological abstraction" of higher-dimensional automata, i.e., the replacement of HDAs by smaller ones that can be considered equivalent from the point of view of both computer science and topology. By definition, topological abstraction preserves the homotopy type, the trace category, and the homology graph of an HDA. We establish conditions under which cube collapses yield topological abstractions of HDAs.

Mechanical versus biological aortic valve implants in the elderly. A comparison of early and mid-term results

OBJECTIVE: Our aim was to compare, in a non randomized study, the surgical outcome in elderly patients with mechanical (Group 1; n=83) and bioprosthetic valve implants (Group 2; n=136). METHODS: During a three year period, 219 patients >75 years underwent Aortic Valve Replacement. The groups matched according to age, sex, comorbidity, valve pathology and concomitant Coronary Artery Bypass Surgery. Follow-up was a total of 469 patient-years (mean follow-up 2.1 years, maximum 4,4 years). RESULTS: Operative mortality was zero and the overall early mortality was 2.3 % (within 30 days). Actuarial survival was 87.5 ± 4.0% and 66.1 ± 7.7% (NS) at 4 years in Group 1 and Group 2, respectively. Freedom from valve-related death was 88.9 ± 3.8% in Group 1 and 69.9±7.9% (NS) in Group 2 at 4 years. CONCLUSION: Aortic Valve Replacement in the elderly (>75 years) is a safe procedure even in cases where concomitant coronary artery revascularization is performed. Only a few anticoagulant-related complications were reported and this may indicate that selected groups of elderly patients with significant life expectancy may benefit from mechanical implants .

Experimental procedures for the identification of material properties of intervertebal disc - a contribution for the development of biomimetic substitutes for the nucleus pulposus

Tese de Doutoramento em Engenharia Mecânica.

A multi–physics approach applied to masonry structures with non–hydraulic lime mortars

Tese de Doutoramento em Engenharia Civil (área de especialização em Engenharia de Estruturas).

Improvement in left ventricular dysfunction after surgical correction of mitral regurgitation

OBJECTIVE: To evaluate whether left ventricular end-systolic (ESD) diameters £ 51mm in patients (pt) with severe chronic mitral regurgitation (MR) are predictors of a poor prognosis after mitral valve surgery (MVS). METHODS: Eleven pt (aged 36±13 years) were studied in the preoperative period (pre), median of 36 days; in the early postoperative period (post1), median of 9 days; and in the late postoperative period (post2), mean of 38.5±37.6 months. Clinical and echocardiographic data were gathered from each pt with MR and systolic diameter ³51mm (mean = 57±4mm) to evaluate the result of MVS. Ten patients were in NYHA Class III/IV. RESULTS: All but 2 pt improved in functional class. Two pt died from heart failure and infectious endocarditis 14 and 11 months, respectively, after valve replacement. According to ejection fraction (EF) in post2, we identified 2 groups: group 1 (n=6), whose EF decreased in post1, but increased in post2 (p=0.01) and group 2 (n=5), whose EF decreased progressively from post1 to post2 (p=0.10). All pt with symptoms lasting £ 48 months had improvement in EF in post2 (p=0.01). CONCLUSION: ESD ³51mm are not always associated with a poor prognosis after MVS in patients with MR. Symptoms lasting up to 48 months are associated with improvement in left ventricular function.

Aspergillus infection in the ascending aorta of a patient with aortic and mitral valve prostheses

We report the case of implantation of metallic mitral and aortic valve prostheses 6 months earlier, with subsequent multiple embolic episodes. The anatomicopathological examination of the thrombus of the third embolic episode was compatible with Aspergillus sp, which was treated with amphotericin B, followed by oral itraconazole. On the fourth embolism, vegetations were visualized in the ascending aorta on echocardiography and resonance imaging, and the patient underwent replacement of the aortic segment by a Haemashield tube and exploration of the aortic prosthesis, which was preserved, because no signs of endocarditis were found. Four months later, the patient died due to cardiogenic shock secondary to acute myocardial infarction caused by probable coronary embolism and partial dysfunction of the aortic prosthesis.

An investigation into the temperature distribution resulting from cutting of compact bone using a reciprocating bone saw

Surgical procedures such as osteotomy and hip replacement involve the cutting of bone with the aid of various manual and powered cutting instruments including manual and powered bone saws. The basic mechanics of bone sawing processes are consistent with most other material sawing processes such as for wood or metal. Frictional rubbing between the blade of the saw and the bone results in the generation of localised heating of the cut bone. Research studies have been carried out which consider the design of the bone saw which deals with specifics of the saw teeth geometry and research which examines the effect of drilling operations on heating of the bone has shown that elevated temperatures will occur from frictional overheating. This overheating in localised areas is known to have an impact on the rate of healing of the bone post operation and the sharpness life of the blade. The purpose of this study was to measure the temperature at three zones at fixed intervals of 3mm, 6mm, and 9mm away from the cutting zone. It should be noted that it was the first time that this measurement technique was used to measure the temperature gradient through the bone specimen thereby establishing the extent to which clinicians are experiencing thermal injury during sawing of bone while using a reciprocating saw. The effect of various cutting feed rate on temperature elevation was also investigated in this research. The results showed that there will be a region of bone at least 9mm either side of the cutting blade experiencing thermal injury as temperatures in this region exceeded the threshold temperature of 44°C for necrosis (cell death).

Performance of Surgical Risk Scores to Predict Mortality after Transcatheter Aortic Valve Implantation

AbstractBackground:Predicting mortality in patients undergoing transcatheter aortic valve implantation (TAVI) remains a challenge.Objectives:To evaluate the performance of 5 risk scores for cardiac surgery in predicting the 30-day mortality among patients of the Brazilian Registry of TAVI.Methods:The Brazilian Multicenter Registry prospectively enrolled 418 patients undergoing TAVI in 18 centers between 2008 and 2013. The 30-day mortality risk was calculated using the following surgical scores: the logistic EuroSCORE I (ESI), EuroSCORE II (ESII), Society of Thoracic Surgeons (STS) score, Ambler score (AS) and Guaragna score (GS). The performance of the risk scores was evaluated in terms of their calibration (Hosmer–Lemeshow test) and discrimination [area under the receiver–operating characteristic curve (AUC)].Results:The mean age was 81.5 ± 7.7 years. The CoreValve (Medtronic) was used in 86.1% of the cohort, and the transfemoral approach was used in 96.2%. The observed 30-day mortality was 9.1%. The 30-day mortality predicted by the scores was as follows: ESI, 20.2 ± 13.8%; ESII, 6.5 ± 13.8%; STS score, 14.7 ± 4.4%; AS, 7.0 ± 3.8%; GS, 17.3 ± 10.8%. Using AUC, none of the tested scores could accurately predict the 30-day mortality. AUC for the scores was as follows: 0.58 [95% confidence interval (CI): 0.49 to 0.68, p = 0.09] for ESI; 0.54 (95% CI: 0.44 to 0.64, p = 0.42) for ESII; 0.57 (95% CI: 0.47 to 0.67, p = 0.16) for AS; 0.48 (95% IC: 0.38 to 0.57, p = 0.68) for STS score; and 0.52 (95% CI: 0.42 to 0.62, p = 0.64) for GS. The Hosmer–Lemeshow test indicated acceptable calibration for all scores (p > 0.05).Conclusions:In this real world Brazilian registry, the surgical risk scores were inaccurate in predicting mortality after TAVI. Risk models specifically developed for TAVI are required.

Fecundity of the spider crab Mithraculus forceps (Decapoda, Mithracidae) from the northeastern coast of the state of São Paulo, Brazil

Fecundity is one of the most important parameters in studying the reproductive output of Pleocyemata decapods, especially because of its relationship to the efficiency of population replacement. Knowledge of fecundity provides basic elements for understanding the reproductive strategies, dynamics, and evolution of a given population. The present investigation provides informations on fecundity, egg size, egg loss, and the relationship between fecundity and selected environmental features, for the spider crab Mithraculus forceps (A. Milne Edwards, 1875). Ovigerous crabs were collected each month during 2000, by SCUBA diving, at Couves Island (23º25'25"S, 44º52'03"W) on the northeastern coast of the state of São Paulo, Brazil. A total of 40 ovigerous females with egg in early development (initial stage) and 28 final stage eggs were obtained and analyzed. Mean fecundity, from eggs of the initial stage, was 402.8 ± 240.1 eggs, ranging from 60 to 1,123 eggs. Sizes of females ranged from 9.4 to 14.0 mm carapace width. Mean egg size was 0.56 ± 0.06 mm diameter. A 20.33% rate of egg loss was estimated by comparing the fecundities of batches of eggs in early and late development (40 initial batches and 28 final stages batches). There were no significant relationships between the water temperature or salinity and variations in fecundity. As in most brachyuran species, M. forceps showed a strong conservative relationship between fecundity and body size.

The palatal dentition in squamate reptiles : morphology, development, attachment, and replacement / D. Luke Mahler, Maureen Kearney.

n.s. no.108(2006)

Feeding ecology of Pterodoras granulosus (Siluriformes, Doradidae) in the Lajeado Reservoir, Tocantins, Brazil

The diet and feeding habits of armado catfish, Pterodoras granulosus (Valenciennes, 1821), were studied in the Lajeado Reservoir, Tocantins, Brazil, and the mouth of its tributaries. Stomach contents of 327 specimens were analyzed by the percentage composition and volumetric methods. The feeding of armado on a wide variety of foods, including both animal and plant items, leads to its classification as a euriphagic species with herbivorous tendency. However, it should be noted that armado showed a strong ontogenetic diet shift, with the gradual replacement of detritus and sediment by plant items, especially terrestrial ones. The environmental use pattern of P. granulosus corroborates the ontogenetic shift observed in its diet. Small fish predominated mainly in the benthic region and detritus and sediment represented an important resource, whereas large fish fed mainly on terrestrial plants, as they explore open water sites and the surface of the water column.

Stakeholder activism, managerial entrenchment, and the congruence of interests between shareholders and stakeholders

We argue that when stakeholder protection is left to the voluntary initiative of managers, concessions to social activists and pressure groups can turn into a self-entrenchment strategy for incumbent CEOs. Stakeholders other than shareholders thus benefit from corporate governance rules putting managers under a tough replacement threat. We show that a minimal amount of formal stakeholder protection, or the introduction of explicit covenants protecting stakeholder rights in the firm charter, may deprive CEOs of the alliance with powerful social activists, thus increasing managerial turnover and shareholder value. These results rationalize a recent trend whereby well-known social activists like Friends of the Earth and active shareholders like CalPERS are showing a growing support for each other's agendas.