Influence of whitening gel application protocol on dental color change

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A curcumin-loaded liquid crystal precursor mucoadhesive system for the treatment of vaginal candidiasis

Women often develop vaginal infections that are caused primarily by organisms of the genus Candida. The current treatments of vaginal candidiasis usually involve azole-based antifungals, though fungal resistance to these compounds has become prevalent. Therefore, much attention has been given to molecules with antifungal properties from natural sources, such as curcumin (CUR). However, CUR has poor solubility in aqueous solvents and poor oral bioavailability. This study attempted to overcome this problem by developing, characterizing, and evaluating the in vitro antifungal action of a CUR-loaded liquid crystal precursor mucoadhesive system (LCPM) for vaginal administration. A low-viscosity LCPM (F) consisting of 40% wt/wt polyoxpropylene-(5)-polyoxyethylene-(20)-cetyl alcohol, 50% wt/wt oleic acid, and 10% wt/wt chitosan dispersion at 0.5% with the addition of 16% poloxamer 407 was developed to take advantage of the lyotropic phase behavior of this formulation. Notably, F could transform into liquid crystal systems when diluted with artificial vaginal mucus at ratios of 1:3 and 1:1 (wt/wt), resulting in the formation of F30 and F100, respectively. Polarized light microscopy and rheological studies revealed that F behaved like an isotropic formulation, whereas F30 and F100 behaved like an anisotropic liquid crystalline system (LCS). Moreover, F30 and F100 presented higher mucoadhesion to porcine vaginal mucosa than F. The analysis of the in vitro activity against Candida albicans revealed that CUR-loaded F was more potent against standard and clinical strains compared with a CUR solution. Therefore, the vaginal administration of CUR-loaded LCPMs represents a promising platform for the treatment of vaginal candidiasis.

Fluoride gel supplemented with sodium hexametaphosphate reduces enamel erosive wear in situ

This study evaluated the effect of fluoride gels, supplemented or not with sodium hexametaphosphate (HMP), on enamel erosive wear in situ. Twelve healthy volunteers wore palatal appliances containing four bovine enamel discs. Subjects were randomly allocated into four experimental phases (double-blind, crossover protocol) according to the gels: Placebo (no fluoride or HMP), 1% NaF, 2% NaF, and 1% NaF+9% HMP. Enamel discs were selected after polishing and surface hardness analysis, and treated only once with the respective gels prior to each experimental phase. Erosion (ERO) was performed by extra-oral immersion of the appliance in 0.05M citric acid, pH 3.2 (four times/day, five minutes each, 5 days). Additional abrasion (ERO+ABR) was produced on only two discs by toothbrushing with fluoridated dentifrice after ERO (four times/day, 30s, 5 days). The specimens were submitted to profilometry and hardness analysis. The results were analyzed by two-way ANOVA and the Student-Newman-Keuls test (p<0.05). The 1% NaF+9% HMP gel promoted significantly lower enamel wear for ERO compared to the other groups, being statistically lower than 1% NaF and Placebo for ERO+ABR. Similarly, the lowest values of integrated lesion area were found for 1% NaF+9% HMP and 2% NaF, respectively, for ERO and ERO+ABR. The addition of HMP to the 1% NaF gel promoted greater protective effect against ERO and ERO+ABR compared to the 1% NaF gel, achieving similar protective levels to those seen for the 2% NaF gel. Gel containing 1% NaF+9% HMP showed a high anti-erosive potential, being a safer alternative when compared to a conventional 2% NaF gel.

In situ selective determination of methylmercury in river water by diffusive gradient in thin films technique (DGT) using baker's yeast (Saccharomyces cerevisiae) immobilized in agarose gel as binding phase

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades ópticas e elétricas de materiais híbridos de sílica/orgânico à base de GPTS:TEOS preparados pelo método sol-gel

Fabrication of optoelectronic devices requires the employment of at least one transparent electrode. Usually, commercially transparent electrodes have been made by deposition of indium tin oxide (ITO) films by RF-Sputtering technique. These commercial electrodes have sheet resistance of about 100 Ω/sq and optical transmittance of 77% at the wavelength of 550 nm. The poly(3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) is an alternative material to fabricate transparent electrodes due to its high conductivity (about 600 S/cm) and solubility in water. Soluble conductive materials exhibits advantages for processing of electrode layers, however there is a disadvantage during devices fabrication once materials with the same solvent of the electrode material cannot be coated one over the other. Alternatively, organic/Silica hybrid materials prepared by sol-gel process allow producing bulks and films with high chemical durability. In order to obtain transparent electrodes with high chemical durability, we introduced a blended material comprising the high UV-VIS transparency of organic/Silica sol-gel material and a high conductivity polymer PEDOT:PSS. The organic/Silica sol was obtained using two different molar concentrations (1:1 and 4:1), of tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). Amounts of PEDOT:PSS solutions were added to the sol material, resulting in different weight fractions of sol and polymer. G:T/P:P were deposit onto glass substrates by spray-coating. In order to perform electrical characterization of the blended material, gold electrodes were thermally evaporated onto the films. The electrical characterization was performed using a Keithley 2410 source/meter unity and the optical characterization, using a Cary50 UV-Vis spectrophotometer. The absorption coefficient and electric conductivity of the different compositions blends, as function of the PEDOT:PSS concentration, were...

Structure of copper complexes adsorbed on a silica gel surface chemically modified with benzimidazole

Silica gel having a particle size between 0.2 and 0.05 mm and a specific surface area, S BET = 473 m 2 g -1, was chemically modified with benzimidazole. Adsorption isotherms of CuX 2 (X = Cl, Br or ClO 4) from ethanol and acetone solutions were studied at 298 K. The metal is bonded to the surface through the free nitrogen atom of the attached benzimidazole. The average number of ligands co-ordinated to the central metal ion was shown to depend on the solid surface loading by the solute. At low loading the electronic and ESR spectral parameters indicated that the copper ion is in a distorted-tetragonal symmetry field.

Efeito da infiltração de sílica pelo método sol-gel na resistência à flexão de bicamadas de porcelana e Y-TZP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Susceptibilidade antimicrobiana ao metronidazole de microrganismos isolados de periodontite crônica e agressiva

The objective of this study was to evaluate the microbial susceptibility to metronidazole from microorganisms isolated from patients with chronic or aggressive periodontitis. The samples were obtained from 50 patients with periodontitis and microorganisms were isolated onto selective and nonselective culture media, identified by biochemical methods and tested for susceptibility to metronidazole. The results evidenced the susceptibility to metronidazole among gram-negative anaerobes and some intermediate susceptibility and resistance among Grampositive anaerobes and facultatives.

Carcinoma de células escamosas em assoalho vaginal de um bovino nelore associado a metástase em pulmão: relato de caso

The squamous cell carcinoma (SCC) is a neoplasm that affect pets and production animals and it’s very common in tropical countries like Brazil; develops in sparsely pigmented, stratified squamous epithelium and in mucosal surfaces exposed Ultraviolet action. The SCC is quite infiltrative but rarely causes metastases. Its occurrence in the female reproductive tract is recognized in the literature on cattle breeds from Europe. This case was a female bovine, Nelore, adult, who was referred to the "Hospital Veterinário Luiz Quintiliano de Oliveira" with dark brown fluid leakage and putrid odor, associated with ulcerative growth of the vagina. Because the extent of injury, the animal was euthanized and taken to the necropsy, which was observed on board structure, ulcerated and pus in the vaginal floor, infiltrated into the pelvic cavity to the serosa of the uterine body. The microscopic findings were detected neoplastic proliferation of epithelial cells in the floor and vaginal metastases in the lung parenchyma, and classified the primary tumor and metastasis as squamous cell carcinoma moderately differentiated.

Avaliação clínica da efetividade do clareamento de consultório sem troca do gel clareador

Esse trabalho teve como objetivo avaliar, clinicamente, a efetividade de dois agentes clareadores aplicados sobre a superfície dentária durante 45 minutos, sem troca do gel. Foram selecionados 10 pacientes de acordo com os critérios de inclusão e exclusão, e a arcada superior dos pacientes foi dividida em duas hemiarcadas (n = 10): na hemiarcada direita (HD), foi aplicado o peróxido de hidrogênio a 35% (PH) Clàriant Office (Angelus); e, na hemiarcada esquerda (HE), o PH 38% Opalescence Boost (Ultradent). Foram realizadas duas sessões clínicas, de 45 minutos cada, com intervalo de uma semana entre as sessões. Inicialmente, ao tratamento clareador, os pacientes receberam profilaxia, moldagem para guia de mensuração de cor com silicone de condensação e avaliação de cor por meio de um aparelho espectrofotômetro Vita Easyshade (Vita Zhanfabrik, Alemanha). Após 14 dias do término do tratamento clareador, foi realizada a mensuração final da cor dos dentes. Os dados foram submetidos ao teste t e de Tukey (p < 0,05). Os resultados demonstraram não haver diferença estatisticamente significativa entre as hemiarcadas quanto à efetividade do clareamento (p = 0,146) e nem quanto à sensibilidade. Pode-se concluir que a aplicação dos materiais avaliados sem troca do gel, por 45 minutos, foi eficaz em promover o clareamento de dentes vitais e com baixa sensibilidade dentária.

Avaliação clínica da nova técnica de clareamento no consultório sem a remoção do gel clareador

Este trabalho teve como objetivo avaliar longitudinalmente um novo protocolo para técnica de clareamento de dentes vitais em consultório. Foram selecionados 20 pacientes, com critérios preestabelecidos, e divididos aleatoriamente, de acordo com o produto utilizado, em 2 grupos (n=10): Grupo 1 — Opalescence Xtra Boost (Ultradent); e Grupo 2 — White Gold Office (Dentsply). Os agentes clareadores foram aplicados apenas uma vez, durante 45min, e cada paciente submetido a duas sessões clareadoras. Para avaliação da cor inicial dos dentes, após 1 mês e após 3 meses do tratamento clareador, foi utilizada a escala de cor Vita Clássica, ordenada pela luminosidade. Concluiu-se que não há diferença no clareamento ou sensibilidade dentária entre os grupos, sendo desnecessária a troca do gel clareador e/ou a utilização de fonte de luz para os agentes clareadores avaliados.

Antimicrobial susceptibility to b-lactams and metronidazole of microorganisms isolated from chronic and aggressive periodontitis

The objective of this study was to evaluate the microbial susceptibility to ß-lactams and metronidazole, and evaluate the production of ß-lactamases by microorganisms isolated from patients with chronic or aggressive periodontitis. The samples were obtained from 50 patients with periodontitis and microorganisms were isolated onto selective and nonselective culture media, identified by biochemical methods and tested for susceptibility to antimicrobial agents (amoxicillin, amoxicillin/clavulanate, cefoxitin, imipenem, metronidazole, penicillin G). The isolates were resistant to at least 1 mg/ml of any drug tested were evaluated to verify the production of ß-lactamases by the method of double layer (or biological) and chromogenic cephalosporin using nitrocefin. The results evidenced resistance to amoxicillin and penicillin G, while the susceptibility to association amoxicillin/clavulanate, imipenem and cefoxitin was widely disseminated among the organisms. Resistance to these drugs showed a clear correlation with the production of ß-lactamase in the majority of microbial groups.

Avaliação da biocompatibilidade de implantes de silicone gel em subcutâneo de ratos: estudo histomorfométrico

Objective: Histomorphometric study to evaluate the biological tissue compatibility of silicone implants suitable for plastic surgery. Methods: Thirty Wistar white rats received subcutaneous implants ande the revestiment of silicone gel Silimed, and randomized into six groups of five animals each, according to the type of implanted material and the time of sacrifice. Eight areas of 60.11 mm2 corresponding to the obtained surgical pieces were analyzed, counting mesenchymal cells, eosinophils, and foreign body giant cells, observing an acceptable biocompatibility in all implants, for subsequent statistical analysis by Tukey test. Results: Silicone gel showed inflammation slightly greater than for other groups, with tissue reactions varying from light to moderate, whose result was the formation of a fibrous capsule around the material, recognized by the organism as a foreign body. Conclusion: In general, it is possible to affirm that silicone gel had acceptable levels of biocompatibility, confirmed the rare presence of foreign body giant cells, and when of the rupture, formed a fibrous capsule around the material, separating the material of the organism.

Chitosan/Carbomer-based tablets containing Metronidazole for potential treatment of periodontal diseases

Mucoadhesive tablets with different mixtures of chitosan and carbomer homopolymer type B were prepared in order to obtain new formulations containing metronidazole for periodontal disease treatment. All tablets were characterized by swelling and erosion studies, ex vivo mucoadhesion force and in vitro drug release. The drug released mechanism was described by Korsmeyer-Peppas and Weibull models. Tablets containing increased amounts of chitosan presented higher swelling ability and the drug release was prolonged in the simulated saliva fluid. The mechanisms for the drug release from tablets were complex, including diffusion, swelling and erosion simultaneously. This kind of delivery system is suitable for formulating metronidazole mucoadhesive systems, representing a good alternative for the local treatment of periodontal diseases.

Preparação e caracterização óptica de filmes de ORMOSIL obtidos via processo sol-gel dopados com azocorantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)