MRI-based prostate brachytherapy seed localization.

A magnetic resonance imaging (MRI) pulse sequence and a corresponding image processing algorithm to localize prostate brachytherapy seeds during or after therapy are presented. Inversion-Recovery with ON-resonant water suppression (IRON) is an MRI methodology that generates positive contrast in regions of magnetic field susceptibility, as created by prostate brachytherapy seeds. Phantoms comprising of several materials found in brachytherapy seeds were created to assess the usability of the IRON pulse sequence for imaging seeds. Resulting images show that seed materials are clearly visible with high contrast using IRON, agreeing with theoretical predictions. A seed localization algorithm to process IRON images demonstrates the potential of this imaging technique for seed localization and dosimetry.

Atomic force microscopy of nucleoprotein complexes.

Recent data on the AFM studies of nucleoprotein complexes of different types are reviewed in this paper. The first section describes the progress in the sample preparation methods for AFM studies of nucleic acids and nucleoprotein complexes. The second part of this paper reviews AFM data on studies of complexes of DNA with regulatory proteins. These studies include two different types of DNA distortion induced by proteins binding: local bending of DNA at sites of protein binding and formation of large loops due to protein-protein interactions between molecules bound to distant sites along the DNA molecules (DNA looping). The prospects for use of AFM for physical mapping of genomes are discussed in this section as well. The third part of the paper reviews data on studies of complexes of DNA with non-sequence specific binding proteins. Special emphasis is given to studies of chromatin which have resulted in progress in the understanding of structure of native chromatin fiber. In this section, novel data on AFM studies of RecA-DNA filaments and complexes of dsRNA with the dsRNA-specific protein p25 are also presented. Discussion of the substrate preparation procedures in relation to the AFM studies of nucleoprotein complexes is given in the final section.

Atomic Force Microscopy Stiffness Tomography on Living Arabidopsis thaliana Cells Reveals the Mechanical Properties of Surface and Deep Cell-Wall Layers during Growth.

Cell-wall mechanical properties play a key role in the growth and the protection of plants. However, little is known about genuine wall mechanical properties and their growth-related dynamics at subcellular resolution and in living cells. Here, we used atomic force microscopy (AFM) stiffness tomography to explore stiffness distribution in the cell wall of suspension-cultured Arabidopsis thaliana as a model of primary, growing cell wall. For the first time that we know of, this new imaging technique was performed on living single cells of a higher plant, permitting monitoring of the stiffness distribution in cell-wall layers as a function of the depth and its evolution during the different growth phases. The mechanical measurements were correlated with changes in the composition of the cell wall, which were revealed by Fourier-transform infrared (FTIR) spectroscopy. In the beginning and end of cell growth, the average stiffness of the cell wall was low and the wall was mechanically homogenous, whereas in the exponential growth phase, the average wall stiffness increased, with increasing heterogeneity. In this phase, the difference between the superficial and deep wall stiffness was highest. FTIR spectra revealed a relative increase in the polysaccharide/lignin content.

Gene-mediated restoration of normal myofiber elasticity in dystrophic muscles.

Dystrophin mediates a physical link between the cytoskeleton of muscle fibers and the extracellular matrix, and its absence leads to muscle degeneration and dystrophy. In this article, we show that the lack of dystrophin affects the elasticity of individual fibers within muscle tissue explants, as probed using atomic force microscopy (AFM), providing a sensitive and quantitative description of the properties of normal and dystrophic myofibers. The rescue of dystrophin expression by exon skipping or by the ectopic expression of the utrophin analogue normalized the elasticity of dystrophic muscles, and these effects were commensurate to the functional recovery of whole muscle strength. However, a more homogeneous and widespread restoration of normal elasticity was obtained by the exon-skipping approach when comparing individual myofibers. AFM may thus provide a quantification of the functional benefit of gene therapies from live tissues coupled to single-cell resolution.

The making of frozen-hydrated, vitreous lamellas from cells for cryo-electron microscopy.

There has been a long standing desire to produce thick (up to 500 nm) cryo-sections of fully hydrated cells and tissue for high-resolution analysis in their natural state by cryo-transmission electron microscopy. Here, we present a method that can successfully produce sections (lamellas in FIB-SEM terminology) of fully hydrated, unstained cells from high-pressure frozen samples by focused ion beam (FIB) milling. The samples are therefore placed in thin copper tubes and vitrified by high-pressure freezing. For transfer, handling and subsequent milling, the tubes are placed in a novel connective device (ferrule) that protects the sample from devitrification and contamination and passes through all operation steps. A piezo driven sample positioning stage (cryo-nano-bench, CNB) with three degrees of freedom was additionally developed to enable accurate milling of frozen-hydrated lamellas. With the CNB, high-pressure frozen samples can be milled to produce either thin lamellas (<100 nm), for direct imaging by high-resolution cryo-TEM or thicker lamellas (300-500 nm) for cryo-electron tomography. The sample remains vitreous throughout the process by using the presented tools and methods. The results are an important step towards investigating larger cells and even tissue in there natural state which in the end will enable us to gain better insights into cellular processes.

Particle exposure scenarios for research and production activities involving nanomaterials

Nanomaterials with structures in the nanoscale (1 to 100 nm) often have chemical, physical and bioactive characteristics different from those of larger entities of the same material. This is interesting for industry but raises questions about the health of exposed people. However, little is known so far about the exposure of workers to inhalable airborne nanomaterials. We investigated several activities in research laboratories and industry to learn about relevant exposure scenarios. Work process analyses were combined with measurements of airborne particle mass concentrations and number−size distributions. Background levels in research settings were mostly low, while in industrial production, levels were sometimes elevated, especially in halls near busy roads or in the presence of diesel fork lifts without particle filters. Peak levels were found in an industrial setting dealing with powders (up to 80,000 particles/cm³ and up to 15 mg/m³). Mostly low concentrations were found for activities involving liquid applications. However, centrifugation and lyophilization of nanoparticle containing solutions resulted in very high particle number concentrations (up to 300,000 particles/cm³), whereas no increases were seen for the same activities conducted with nanoparticle−free liquids. No significant increases of particle concentrations were found for processes involving nanoparticles bound to surfaces. Also no increases were observed in laboratories that were visualizing properties and structures of small amounts of nanomaterials. Conclusion: When studying exposure scenarios for airborne nanomaterials, the focus should not only be on processes involving nano−powders, but also on processes involving intensively treated nanoparticle−containing liquids. Acknowledgement: We thank Chantal Imhof, MSc and Guillaume Ferraris, MSc for their contributions.

Photonic characteristics of Langmuir-Blodgett self-assembled monolayers of colloidal silica particles

Monodispersed colloidal crystals based on silica sub-micrometric particles were synthesized using the Stöber-Fink-Bohn process. The control of nucleation and coalescence result in improved characteristics such as high sphericity and very low size dispersion. The resulting silica particles show characteristics suitable for self-assembling across large areas of closely-packed 2D crystal monolayers by an accurate Langmuir-Blodgett deposition process on glass, fused silica and silicon substrates. Due to their special optical properties, colloidal films have potential applications in fields including photonics, electronics, electro-optics, medicine (detectors and sensors), membrane filters and surface devices. The deposited monolayers of silica particles were characterized by means of FESEM, AFM and optical transmittance measurements in order to analyze their specific properties and characteristics. We propose a theoretical calculation for the photonic band gaps in 2D systems using an extrapolation of the photonic behavior of the crystal from 3D to 2D. In this work we show that the methodology used and the conditions in self-assembly processes are decisive for producing high-quality two-dimensional colloidal crystals by the Langmuir-Blodgett technique.

Feeding of nauplii, copepodites and adults of Calanipeda aquaedulcis (Calanoida) in Mediterranean salt marshes

Feeding of the different developmental stages of Calanipeda aquaedulcis on natural particles (bacterio-, phyto- and microzooplankton) was measured in a Mediterranean salt marsh (Empordà wetlands, NE Iberian Peninsula). Bottle incubations were performed in the field both in autumn and spring. The results showed differences in the diet of the different developmental stages due to both prey type and size. In general, the size of the ingested prey increased with increasing size of the C. aquaedulcis stage. While C. aquaedulcis adults had high ingestion rates and selection coefficients for large prey (micro- and nanoplankton), nauplii preferentially consumed smaller prey items (picoplankton). Copepodites showed the widest prey size range, including pico-, nano- and microplankton. Nevertheless, the lower size limit for particle capture was similar for all stages, i.e. between 1.7 and 2.1 μm. Omnivory was observed in all stages of C. aquaedulcis. Heterotrophic prey (picoplankton, dinoflagellates and ciliates) were the most ingested items. The ability to partition the available food among the different developmental stages could represent an advantage in times of ood scarcity because it may reduce intraspecific competition. This may explain how C. aquaedulcis is able to predominate in the zooplankton community for several weeks during spring and summer ven in situations of low food availability

Limitations and information needs for engineered nanomaterial-specific exposure estimation and scenarios: recommendations for improved reporting practices

The aim of this paper is to describe the process and challenges in building exposure scenarios for engineered nanomaterials (ENM), using an exposure scenario format similar to that used for the European Chemicals regulation (REACH). Over 60 exposure scenarios were developed based on information from publicly available sources (literature, books, and reports), publicly available exposure estimation models, occupational sampling campaign data from partnering institutions, and industrial partners regarding their own facilities. The primary focus was on carbon-based nanomaterials, nano-silver (nano-Ag) and nano-titanium dioxide (nano-TiO2), and included occupational and consumer uses of these materials with consideration of the associated environmental release. The process of building exposure scenarios illustrated the availability and limitations of existing information and exposure assessment tools for characterizing exposure to ENM, particularly as it relates to risk assessment. This article describes the gaps in the information reviewed, recommends future areas of ENM exposure research, and proposes types of information that should, at a minimum, be included when reporting the results of such research, so that the information is useful in a wider context.

The use of micro-XRD for the study of glaze color decorations

The compounds responsible for the colours and decorations in glass and glazed ceramics include: colouring agents (transition metal ions), pigments (micro-and nano-precipitates of compounds that either do not dissolve or recrystallize in the glassy matrix) and opacifiers (microcrystalline compounds with high light scattering capability). Their composition, structure and range of stability are highly dependent not only on the composition but also on the procedures followed to obtain them. Chemical composition of the colorants and crystallites may be obtained by means of SEM-EDX and WDX. Synchrotron Radiation micro-X-ray Diffraction has a small beam size adequate (10 to 50 microns footprint size) to obtain the structural information of crystalline compounds and high brilliance, optimal for determining the crystallites even when present in low amounts. In addition, in glass decorations the crystallites often appear forming thin layers (from 10 to 100 micrometers thick) and they show a depth dependent composition and crystal structure. Their nature and distribution across the glass/glazes decorations gives direct information on the technology of production and stability and may be related to the color and appearance. A selection of glass and glaze coloring agents and decorations are studied by means of SR-micro- XRD and SEM-EDX including: manganese brown, antimony yellow, red copper lusters and cobalt blue. The selection includes Medieval (Islamic, and Hispano Moresque) and renaissance tin glazed ceramics from the 10th to the 17th century AD.

Stiffness tomography by atomic force microscopy.

The atomic force microscope is a convenient tool to probe living samples at the nanometric scale. Among its numerous capabilities, the instrument can be operated as a nano-indenter to gather information about the mechanical properties of the sample. In this operating mode, the deformation of the cantilever is displayed as a function of the indentation depth of the tip into the sample. Fitting this curve with different theoretical models permits us to estimate the Young's modulus of the sample at the indentation spot. We describe what to our knowledge is a new technique to process these curves to distinguish structures of different stiffness buried into the bulk of the sample. The working principle of this new imaging technique has been verified by finite element models and successfully applied to living cells.

Typing less common ovarian tumors: A training tool based on a pattern-based algorithm applied to a set of 20 virtual slides.

Context: Ovarian tumors (OT) typing is a competency expected from pathologists, with significant clinical implications. OT however come in numerous different types, some rather rare, with the consequence of few opportunities for practice in some departments. Aim: Our aim was to design a tool for pathologists to train in less common OT typing. Method and Results: Representative slides of 20 less common OT were scanned (Nano Zoomer Digital Hamamatsu®) and the diagnostic algorithm proposed by Young and Scully applied to each case (Young RH and Scully RE, Seminars in Diagnostic Pathology 2001, 18: 161-235) to include: recognition of morphological pattern(s); shortlisting of differential diagnosis; proposition of relevant immunohistochemical markers. The next steps of this project will be: evaluation of the tool in several post-graduate training centers in Europe and Québec; improvement of its design based on evaluation results; diffusion to a larger public. Discussion: In clinical medicine, solving many cases is recognized as of utmost importance for a novice to become an expert. This project relies on the virtual slides technology to provide pathologists with a learning tool aimed at increasing their skills in OT typing. After due evaluation, this model might be extended to other uncommon tumors.

Investigation phytochimique d'une plante médicinale malgache Hypoestes serpens (Vahl) R. Br. (Acanthaceae) variété glabre et étude comparative avec la variété poilue

Résumé A Madagascar, comme dans plusieurs pays en développement, une grande partie de la population utilise les plantes pour se soigner. Plusieurs espèces des plantes sont ainsi utilisées en médecine traditionnelle malgache. Par ailleurs, la plupart de ces plantes ne font l'objet que de très peu d'étude scientifique. En effet, dans le cadre de l'investigation phytochimique de plantes utilisées en médecine traditionnelle malgache et dans la recherche des nouvelles substances biologiquement actives, Hypoestes serpens (Vahl) R. Br. (Acanthaceae) a été étudiée. Elle se présente sous deux variétés (glabre et poilue) qui sont tous utilisées dans la région sud-centre de Madagascar pour traiter la blennorragie. De l'extrait dichlorométhanique des feuilles de H. serpens (Vahl) R. Br. variété glabre, 12 diterpénoides dont 8 nouveaux ont été isolés. Ils ont tous montré une activité antifongique contre un champignon pathogène des plantes, Cladosporium cucumerinum, dans la bioautographie directe sur CCM. Quelques-uns ont également présenté une activité contre une levure saprophyte chez l'homme, Candida albicans et une activité inhibitrice de l'enzyme acétylcholinesterase. Les diterpènoïdes sont déjà considérés comme les principaux métabolites secondaires du genre Hypoestes. Le fractionnement de l'extrait méthanolique a conduit à l'isolement de 5 glycosides des flavonoïdes dont 4 sous formes C-g,lycosides qui n'ont jamais été identifiés dans la famille Acanthaceae. Ces flavonoïdes ont présenté une activité antiradicalaire contre le DPPH. Le fractionnement et la purification des extraits ont été effectués à l'aide des différentes techniques chromatographiques telles que la chromatographie sur colonne ouverte, la filtration sur gel, la chromatographie liquide à haute pression, la chromatographie liquide à moyenne pression et la chromatographie liquide à basse pression. Par ailleurs, les structures des composés isolés ont été élucidées par des techniques spectroscopiques (UV, MS, RMN) et de méthode chimique (hydrolyse acide). En plus de ces techniques, certaines méthodes physiques (cristallographie par rayons-X, mesure de rotation optique) ont été réalisées pour confirmer certaines structures. Comme l'espèce Hypoestes serpens (Vahl) R. Br. se présente en deux variétés, une étude comparative a été effectuée. Cette étude avait montré que ces deux variétés ont une activité biologique similaire. Finalement, une technique analytique couplée, HPLC-UV-APC1-MS a permis de montrer la présence de toutes les substances isolées de la variété glabre dans la variété poilue. Second résumé Depuis des milliers d'almées, l'homme utilise les plantes pour se soigner. De nos jours, même avec le développement de la médecine moderne, la phytothérapie reste toujours la forme des soins de santé abordable et accessible pour la majorité des populations rurales des pays en développement. En outre, les plantes médicinales constituent une source potentielle de molécules biologiquement actives pour les industries pharmaceutiques et actuellement, on estime que 25% des médicaments commercialisés dans le monde sont à base de plantes Dans le cadre de la recherche des nouvelles molécules à intérêt thérapeutique qui pourraient devenir un médicament ou un modèle de structure ("lead compound") pour le développement de nouveaux médicaments, nous avons fait une étude sur l'espèce, Hypoestes serpens (Vahl) R. Br, plante utilisée en médecine traditionnelle malgache. Cette espèce existe en deux variétés, une glabre et une autre poilue qui sont tous utilisées dans la région sud-centre de Madagascar pour traiter la blennorragie. Par ailleurs, les tradipraticiens utilisent de préférence la variété poilue. Dans la première partie de ce présent travail, une investigation phytochimique de H serpens, variété glabre (variété moins utilisée) a d'abord été effectuée afm d'isoler et d'identifier le maximum des molécules biologiquement actives qu'elle contient. De ce fait, 17 composés dont 8 nouveaux ont été isolés. Les potentiels d'activités thérapeutiques des substances isolées ont ensuite été dépistés sur les différents cibles suivants.: deux souches de champignons (Cladosporium cucumerinum et Candida albicans), l'enzyme acétylcholinesterase et le radical DPPH. La deuxième partie de ce travail a été consacrée sur l'étude comparative des deux variétés (glabre et poilue) de H. serpens à la fois sur le plan biologique et sur le plan phytochimique. A l'issue de cette comparaison, nous avons constaté que l'utilisation de ces deux variétés en médecine traditionnelle malgache n'est pas un hasard ; les deux variétés avaient présenté une activité biologique très remarquable et contiennent les mêmes substances actives. Ces résultats démontrent les potentiels thérapeutiques de H serpens en médecine traditionnelle malgache et pourraient également encourager les tradipraticiens à utiliser la variété glabre tout en protégeant la variété poilue qui est en voie de disparition actuellement. En bref, l'investigation phytochimique de H. serpens justifiée par l'isolement et l'identification de certains de ses principes actifs ouvre la voie aux recherches des médicaments d'origine naturelle. Abstract In Madagascar, as in many developing countries, most people use plants to cure. A large number of plant species are employed in Malagasy traditional medicine. Moreover, most of these plants have been subject only very little scientific study. As part of a phytochemical investigation of plants used in Malagasy traditional medicine and in the search for new biologically active substances, Hypoestes serpens (Vah1) R.Br. (Acanthaceae) was investigated. This species exists in two varieties (glabrous and hairy) which are used in the south-center part of Madagascar to treat gonorrhoea. From the dichloromethane extract of the leaves of H. serpens (Vah1) R. Br. glabrous variety, 12 diterpenoids 8 of which were new, were isolated. They showed antifungal activity against the plant pathogen Cladosporium cucumerinum, in the direct TLC bioautography. Some of them also had activity against the yeast Candida athicans and inhibited acetylcholinesterase. The diterpenes are considered as the principal secondary metabolites of the genus Hypoestes. Fractionation of the methanol extract led to the isolation of 5 flavonoid glycosides, 4 of which were C-glycosides, never before identified in the Acanthaceae family. These flavonoids showed radical scavenging activity against DPPH. The fractionation and the purification of the extracts were achieved by different chromatographic techniques such as open-column chromatography, gel filtration, high- pressure liquid chromatography, medium-pressure liquid chromatography and low-pressure liquid chromatography. Moreover, the structures of the isolated compounds were elucidated by spectroscopic techniques (UV, MS, NMR) and chemical technique (acid hydrolysis). In addition, some physical methods (X-ray crystallography, measurement of optical rotation) were performed to confirm some structures. As the species Hypoestes serpens (Vah1) R. Br. is present in two varieties, a comparative study was carried out. This study showed that these two varieties had similar biological activity. Finally, a coupled analytical technique HPLC-UV-APCI-MS showed the presence of the same compounds in both the glabrous and hairy varieties.

Études des forces d'interaction entre Staphylococcus aureus et fibrinogène par microscopie à force atomique

Ce travail s'inscrit dans le cadre d'un projet dont l'objectif est d'étudier les propriétés d'adhésion du ClfA au fibrinogène à l'aide de l'AFM. Plus précisément, le mode « Force spectroscopy » de l'AFM sera utilisé afin de mesurer les forces d'interactions entre le fibrinogène et le ClfA cloné à des bactéries ne comportant pas de MSCRAMMs et n'étant pas pathogène pour l'homme. Puis les forces d'interactions seront mesurées entre le fibrinogène et la surface des S. aureus. Une meilleure connaissance des propriétés d'adhésion des S. aureus au ClfA contribuerait ainsi au développement de la recherche dans ce domaine et à de potentielle future thérapie contre les infections à S. aureus.