Effect of the preparation technique on the catalytic properties of mesoporous V-HMS for the oxidation of toluene

Various mesoporous catalysts with vanadium loadings between 0.5 and 6 V wt.% and surface areas around 1300 m(2)/g were synthesized using the isomorphous substitution (IS) and molecular designed dispersion (MDD) techniques. Their catalytic properties were tested using toluene as a model VOC in a fixed bed reactor at temperatures between 300 and 550 degrees C. It was found that during the oxidation of toluene, over V-HMS synthesized via IS, conversion of toluene mainly results in carbon oxides, benzene, benzaldehyde and water. Total conversion is greatly improved when the vanadium content is increased from around 1.5 to 3.0 wt.%, but an increase in the textural porosity (V-TEX/V-MESO) from 0.3 to 0.6 had no discernable effect on the conversion. This can be explained by the fact that a V-TEX/V-MESO as low as 0.3 is sufficient to facilitate the access of toluene into the framework confined mesopores without any molecular transport limitations. However, when using V-HMS synthesized by MDD, conversion of toluene is greatly improved when the V-TEX/ V-MESO ratio is increased from 0.1 to 0.6. This is because the diffusion limitations are minimized by this increase. V-HMS synthesized via MDD does not exhibit selectivity to benzaldehyde, favoring total oxidation to CO and CO2. This different oxidation mechanism can be explained in terms of location, accessibility and number of active species on the surface of the HMS support. (c) 2005 Elsevier Inc. All rights reserved.

An equivalent distributed magnetic current based FDTD method for the calculation of e-fields induced by gradient coils in MRI

This paper evaluates a low-frequency FDTD method applied to the problem of induced E-fields/eddy currents in the human body resulting from the pulsed magnetic field gradients in MRI. In this algorithm, a distributed equivalent magnetic current (DEMC) is proposed as the electromagnetic source and is obtained by quasistatic calculation of the empty coil's vector potential or measurements therein. This technique circumvents the discretizing of complicated gradient coil geometries into a mesh of Yee cells, and thereby enables any type of gradient coil modeling or other complex low frequency sources. The proposed method has been verified against an example with an analytical solution. Results are presented showing the spatial distribution of gradient-induced electric fields in a multilayered spherical phantom model and a complete body model.

Cross-language Perception of Word-final Stops by Native Vietnamese Listeners: Preliminary Results on the Role of Specific, Non-native Phonetic Experience

This study examined the discrimination of word-final stop contrasts (/p/-/t/, /p/-/k/, /t/-/k/) in English and Thai by 12 listeners who speak Vietnamese as their first language (L1). Vietnamese shares specific phonetic realization of stops with Thai, i.e., unreleased final stop and differs from English which allows both released and unreleased final stops. These 12 native Vietnamese (NV) listeners’ discrimination accuracy was compared to that of the two listener groups (Australian English (AE), native Thai (NT)) tested in previous studies. The NV group was less accurate than the native group in discriminating both English and Thai stop contrasts. In particular, for the Thai /t/-/k/ contrast, they were significantly less accurate than the AE listeners. The present findings suggest that experience with specific (i.e., unreleased) and native phonetic realization of sounds may be essential in accurate discrimination of final stop contrasts. The effect of L1 dialect on cross-language speech perception is discussed.

Transcriptome analysis of a respiratory Saccharomyces cerevisiae strain suggests the expression of its phenotype is glucose insensitive and predominantly controlled by Hap4, Cat8 and Mig1

BACKGROUND: We previously described the first respiratory Saccharomyces cerevisiae strain, KOY.TM6*P, by integrating the gene encoding a chimeric hexose transporter, Tm6*, into the genome of an hxt null yeast. Subsequently we transferred this respiratory phenotype in the presence of up to 50 g/L glucose to a yeast strain, V5 hxt1-7Delta, in which only HXT1-7 had been deleted. In this study, we compared the transcriptome of the resultant strain, V5.TM6*P, with that of its wild-type parent, V5, at different glucose concentrations. RESULTS: cDNA array analyses revealed that alterations in gene expression that occur when transitioning from a respiro-fermentative (V5) to a respiratory (V5.TM6*P) strain, are very similar to those in cells undergoing a diauxic shift. We also undertook an analysis of transcription factor binding sites in our dataset by examining previously-published biological data for Hap4 (in complex with Hap2, 3, 5), Cat8 and Mig1, and used this in combination with verified binding consensus sequences to identify genes likely to be regulated by one or more of these. Of the induced genes in our dataset, 77% had binding sites for the Hap complex, with 72% having at least two. In addition, 13% were found to have a binding site for Cat8 and 21% had a binding site for Mig1. Unexpectedly, both the up- and down-regulation of many of the genes in our dataset had a clear glucose dependence in the parent V5 strain that was not present in V5.TM6*P. This indicates that the relief of glucose repression is already operable at much higher glucose concentrations than is widely accepted and suggests that glucose sensing might occur inside the cell. CONCLUSION: Our dataset gives a remarkably complete view of the involvement of genes in the TCA cycle, glyoxylate cycle and respiratory chain in the expression of the phenotype of V5.TM6*P. Furthermore, 88% of the transcriptional response of the induced genes in our dataset can be related to the potential activities of just three proteins: Hap4, Cat8 and Mig1. Overall, our data support genetic remodelling in V5.TM6*P consistent with a respiratory metabolism which is insensitive to external glucose concentrations.

The feasibility of neuroimaging methods in marketing research

On July 17, 1990, President George Bush ssued “Proclamation #6158" which boldly declared the following ten years would be called the “Decade of the Brain” (Bush, 1990). Accordingly, the research mandates of all US federal biomedical institutions worldwide were redirected towards the study of the brain in general and cognitive neuroscience specifically. In 2008, one of the greatest legacies of this “Decade of the Brain” is the impressive array of techniques that can be used to study cortical activity. We now stand at a juncture where cognitive function can be mapped in the time, space and frequency domains, as and when such activity occurs. These advanced techniques have led to discoveries in many fields of research and clinical science, including psychology and psychiatry. Unfortunately, neuroscientific techniques have yet to be enthusiastically adopted by the social sciences. Market researchers, as specialized social scientists, have an unparalleled opportunity to adopt cognitive neuroscientific techniques and significantly redefine the field and possibly even cause substantial dislocations in business models. Following from this is a significant opportunity for more commercially-oriented researchers to employ such techniques in their own offerings. This report examines the feasibility of these techniques.

Internal service quality and its impact on external service quality:a study of the role of internal customer types and the dimensions which are used to assess internal suppliers within an organisation and how this affects external service quality

This research explores the role of internal customers in the delivery of external service quality. It will consider any potentially different internal customer types that may exist within the organisation. Additionally, it will explore any potential differences in the dimensions that are used to measure service quality internally and externally. If there are different internal customer types then there may be different dimensions which are used to measure service quality between these types and this will be considered also. The approach adopted given the depth and breadth of understanding required, was an action research case based approach. The research objectives were:(i) To determine the dimensions of internal service quality between internal customer supplier cells. (ii) To determine what variation, if any, there is in the dimension sets between internal customer supplier cells. (iii) To determine any ranking in the dimensions that could exist by internal customer supplier cell type. (iv) To investigate the impact of internal service quality on external service quality over time. The research findings were: (i) The majority of the dimensions used in measuring external service quality were also used internally. There were additions of new dimensions however and some dimensions which were used externally, for internal use, had to be redefined. (ii) Variation in dimension sets were revealed during the research. Four different dimension sets were identified and these were matched with four different types of internal service interaction. (iii) Differences in the ranking of dimensions within each dimension set for each internal customer supplier cell type were confirmed. (iv) Internal service quality was seen to influence external service quality but at a cellular level rather than company level. At the company level, the average internal service quality at the start and finish of the research showed no improvement but external service quality had improved. Further investigation at the cellular level showed that improvements in internal service quality had occurred. Those improvements were found to be with the cells that were closest to the customer.The research implications were found to be: (i) some cells may not be necessary in the delivery of external service quality. (ii) The immediacy of the cell to the external customer and number of interactions into and out of that cell has the greatest effect on external customer satisfaction. (iii) Internal service quality may be driven by the customer affecting those cells at the front end of the business first. This then cascades back to those cells which are less immediate until ultimately the whole organisation shows improvements in internal service quality.

The effect of antifoam addition on protein production yields

Pichia pastoris is a widely used host for recombinant protein production. The foaming associated with culturing it on a large scale is commonly prevented by the addition of chemical antifoaming agents or "antifoams." Unexpectedly, the addition of a range of antifoams to both shake flask and bioreactor cultures of P. pastoris has been shown to alter the total yield of the recombinant protein being produced. Possible explanations for this are that the presence of the antifoam increases the total amount of protein being produced and secreted per cell or that it increases the density of the culture. Antifoaming agents may therefore have specific effects on the growth and yield characteristics of recombinant cultures, in addition to their primary action as de-foamers.

What do we know about the experience of age related macular degeneration? A systematic review and meta-synthesis of qualitative research

Age Related Macular Degeneration (AMD) is the leading cause of registerable blindness with a high medical and societal cost burden. Much of the research examining experiences of living with AMD has been conducted independently with small sample sizes and has failed to impact on practice. Meta-synthesis of qualitative research can improve the understanding of the experience of living with AMD by drawing together findings of qualitative studies. This article presents a systematic review and meta-synthesis of qualitative studies investigating the experience of AMD (literature searched up to April 2012; published studies identified range from 1996 to 2009). The review highlights themes relating to: functional limitations, adaptation and independence; feelings about the future with vision impairment; interaction with the health service; social engagement; disclosure; and the emotional impacts of living with AMD. Attention to the experience of living with AMD can help us to better understand the needs of patients. This meta-synthesis aimed to bring together the findings of qualitative research studies and highlights important areas for consideration when caring for patients with AMD. Our findings suggest that a holistic approach to service provision and support for AMD is needed which takes into account individuals' needs and experiences when coping with and adjusting to living with AMD. This support should aim to reduce stigma, increase social engagement, and develop the psychological resources of patients with AMD.

Towards an operations strategy for the infusion of product-centric services into manufacturing:service systems implementation

The work in this chapter is concerned with product-centric servitization. This is where a portfolio of services are formed and integrated to support product availability and use. Such servitization can be a valuable source of revenue for a manufacturer, yet little attention has been given to the configuration of the wider operations strategy that needs to be in place to deliver integrated products and services successfully. Therefore, the purpose of this chapter is to put forward a generic set of characteristics for such operations. Our intention is that these characteristics will be valuable to practitioners contemplating sophisticated forms of servitization, as they suggest the likely and significant changes that will be needed to the operations strategy of a conventional manufacturing organisation.

Is a little sunshine all we need? On the impact of sunshine regulation on profits, productivity and prices in the Dutch drinking water sector

This paper analyzes the performance of Dutch drinking water utilities before and after the introduction of sunshine regulation, which involves publication of the performance of utilities but no formal price regulation. By decomposing profit change into its economic drivers, our results suggest that, in the Dutch political and institutional context, sunshine regulation was effective in improving the productivity of publicly organised services. Nevertheless, while sunshine regulation did bring about a moderate reduction in water prices, sustained and substantial economic profits suggest that it may not have the potential to fully align output prices with economic costs in the long run. In methodological terms, the DEA based profit decomposition is extended to robust and conditional non-parametric efficiency measures, so as to account better for both uncertainty and differences in operating environment between utilities.

Discovering the preferences of physicians with regards to rank-ordered medical documents

The practice of evidence-based medicine involves consulting documents from repositories such as Scopus, PubMed, or the Cochrane Library. The most common approach for presenting retrieved documents is in the form of a list, with the assumption that the higher a document is on a list, the more relevant it is. Despite this list-based presentation, it is seldom studied how physicians perceive the importance of the order of documents presented in a list. This paper describes an empirical study that elicited and modeled physicians' preferences with regard to list-based results. Preferences were analyzed using a GRIP method that relies on pairwise comparisons of selected subsets of possible rank-ordered lists composed of 3 documents. The results allow us to draw conclusions regarding physicians' attitudes towards the importance of having documents ranked correctly on a result list, versus the importance of retrieving relevant but misplaced documents. Our findings should help developers of clinical information retrieval applications when deciding how retrieved documents should be presented and how performance of the application should be assessed. © 2012 Springer-Verlag Berlin Heidelberg.

Negotiating proximity:expert testimony and collective memory in the trials of environmental activists in France and the United Kingdom

This article analyzes the role of expert witness testimony in the trials of social movement actors, discussing the trial of the "Kingsnorth Six" in Britain and the trials of activists currently mobilising against airport construction at Notre Dame des Landes in western France. Though the study of expert testimony has so far overwhelmingly concentrated on fact-finding and admissibility, the cases here reveal the importance of expert testimony not simply in terms of legal argument, but in "moral" or political terms, as it reflects and constitutes movement cognitive praxis. In the so-called climate change defence presented by the Kingsnorth Six, I argue that expert testimony attained a "negotiation of proximity," connecting different types of contributory expertise to link the scales and registers of climate science with those of everyday understanding and meaning. Expert testimony in the trials of activists in France, however, whilst ostensibly able to develop similar bridging narratives, has instead been used to construct resistance to the airport siting as already proximate, material, and embedded. To explain this, I argue that attention to the symbolic, as well as instrumental, functions of expert testimony reveals the crucial role that collective memory plays in the construction of both knowledge and grievance in these cases. Collective memory is both a constraint on and catalyst for mobilisation, defining the boundaries of the sayable. Testimony in trials both reflects and reproduces these elements and is a vital explanatory tool for understanding the narrativisation and communication of movement identities and objectives. © 2013 The Author. Law & Policy © 2013 The University of Denver/Colorado Seminary.

An analysis of the role of soft systems methodology in the change process and the contribution of the facilitator within this process

This research aims to examine the effectiveness of Soft Systems Methodology (SSM) to enable systemic change within local goverment and local NHS environments and to examine the role of the facilitator within this process. Checkland's Mode 2 variant of Soft Systems Methodology was applied on an experimental basis in two environments, Herefordshire Health Authority and Sand well Health Authority. The Herefordshire application used SSM in the design of an Integrated Care Pathway for stroke patients. In Sandwell, SSM was deployed to assist in the design of an Infonnation Management and Technology (IM&T) Strategy for the boundary-spanning Sandwell Partnership. Both of these environments were experiencing significant organisational change as the experiments unfurled. The explicit objectives of the research were: To examine the evolution and development of SSM and to contribute to its further development. To apply the Soft Systems Methodology to change processes within the NHS. To evaluate the potential role of SSM in this wider process of change. To assess the role of the researcher as a facilitator within this process. To develop a critical framework through which the impact of SSM on change might be understood and assessed. In developing these objectives, it became apparent that there was a gap in knowledge relating to SSM. This gap concerns the evaluation of the role of the approach in the change process. The case studies highlighted issues in stakeholder selection and management; the communicative assumptions in SSM; the ambiguous role of the facilitator; and the impact of highly politicised problem environments on the effectiveness of the methodology in the process of change. An augmented variant on SSM that integrates an appropriate (social constructivist) evaluation method is outlined, together with a series of hypotheses about the operationalisation of this proposed method.

Living with uncertainty in the age of runtime models

Uncertainty can be defined as the difference between information that is represented in an executing system and the information that is both measurable and available about the system at a certain point in its life-time. A software system can be exposed to multiple sources of uncertainty produced by, for example, ambiguous requirements and unpredictable execution environments. A runtime model is a dynamic knowledge base that abstracts useful information about the system, its operational context and the extent to which the system meets its stakeholders' needs. A software system can successfully operate in multiple dynamic contexts by using runtime models that augment information available at design-time with information monitored at runtime. This chapter explores the role of runtime models as a means to cope with uncertainty. To this end, we introduce a well-suited terminology about models, runtime models and uncertainty and present a state-of-the-art summary on model-based techniques for addressing uncertainty both at development- and runtime. Using a case study about robot systems we discuss how current techniques and the MAPE-K loop can be used together to tackle uncertainty. Furthermore, we propose possible extensions of the MAPE-K loop architecture with runtime models to further handle uncertainty at runtime. The chapter concludes by identifying key challenges, and enabling technologies for using runtime models to address uncertainty, and also identifies closely related research communities that can foster ideas for resolving the challenges raised. © 2014 Springer International Publishing.

The integration of ProxiMAX randomisation with CIS display for the high-throughput production of novel peptides

Saturation mutagenesis is a powerful tool in modern protein engineering. This can allow the analysis of potential new properties thus allowing key residues within a protein to be targeted and randomised. However, the creation of large libraries using conventional saturation mutagenesis with degenerate codons (NNN or NNK) has inherent redundancy and disparities in residue representation. In this we describe the combination of ProxiMAX randomisation and CIS display for the use of generating novel peptides. Unlike other methods ProxiMAX randomisation does not require any intricate chemistry but simply utilises synthetic DNA and molecular biology techniques. Designed ‘MAX’ oligonucleotides were ligated, amplified and digested in an iterative cycle. Results show that randomised ‘MAX’ codons can be added sequentially to the base sequence creating a series of randomised non-degenerate codons that can subsequently be inserted into a gene. CIS display (Isogencia, UK) is an in vitro DNA based screening method that creates a genotype to phenotype link between a peptide and the nucleic acid that encodes it. The use of straight forward in vitro transcription/translation and other molecular biology techniques permits ease of use along with flexibility making it a potent screening technique. Using ProxiMAX randomisation in combination with CIS display, the aim is to produce randomised anti-nerve growth factor (NGF) and calcitonin gene-related (CGRP) peptides to demonstrate the high-throughput nature of this combination.