Glyphosate has low toxicity to citrus plants growing in the field

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Culture of mature trophoblastic giant cells from bovine placentomes

The mostly binucleate trophoblast giant cells (TGC) found in bovine placentomes, in addition to synthesizing and releasing hormones play an important role in fetal development and maternal adaptation to pregnancy. Placentomes from early gestation were collected, and for isolation of mature TGC, three cellular disaggregation methods, mechanical (MECH), enzymatic by trypsin (TRYP) or collagenase (COLL) were compared to each other. Further on, the cell survival in culture medium (DMEM) supplemented with either 10% fetal calf serum (FCS) or 10% serum replacement (SR) on culture plates free of any substrate was evaluated over a period of 90 days by trypan blue exclusion. The cells were further characterized by HOECHST 33342 nuclear staining, and immunocytochemical staining with monoclonal antibodies against vimentim and cytokeratin. A mean total rate of TGC survival of 82.56% was recorded. Statistical analysis showed significantly higher survival rates after enzymatic disaggregation with COLL (86.23%) than following MECH (80.38%) or TRYP (80.91%) treatment. Supplementation of DMEM with FCS resulted in significantly higher cellular survival rates (87.13%) when compared to the addition of SR (77.73%). Analysis of the influence of both, disaggregation method and medium supplementation on TGC survival revealed statistically significant differences between the following groups: MECH-SR (71.09%) was significantly lower than all other groups; TRYP-SR (78.03%) was significantly different from all other groups; TRYP-FCS (83.43%) and COLL-SR (84.08%) were significantly lower than MECH-FCS (89.98%) which together with COLL-FCS (88.25%) showed the highest cellular survival rate. In summary, our results show that TGC isolated from early gestation placentomes may be viable for more than 90 days of culture. However, whether these TGC produce placental lactogen throughout this period has yet to be determined. (c) 2006 Elsevier B.V. All rights reserved.

Soil CO2 emission of sugarcane fields as affected by topography

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Postharvest Conservation of Mature-Green and Ripe 'Paluma' Guava Stored at Two Temperatures

This work aimed to establish the importance of maturation and ripeness stages and the use of refrigeration for the conservation of 'Paluma' guavas. Fruit picked at the mature-green and ripe stages were stored at ambient conditions (21 degrees C and 85% RH) and also at 10 degrees C (85% RH). The fruit were evaluated every 2 or 3 days for weight loss, appearance, decay, color, firmness, soluble solids, titratable acidity, ascorbic acid, total polyphenols extractable content and total antioxidant activity. The fruit stored at 21 degrees C had higher weight loss than those stored at 10 degrees C. Mature-green guavas at 21 degrees C remained in good quality for 6 days, but at 10 degrees C, the preservation period increased to 15 days. Ripe fruit were preserved for 4 days at 21 degrees C, which was extended with refrigeration to 6 days. Mature-green fruit at 21 degrees C had decay in 6 days; while at 10 degrees C decay happened in 18 days. The peel color of mature-green fruits, at 21 degrees C, showed increasing values of luminosity, indicating that its color became lighter (change from green to yellow) and at 10 degrees C it showed constant values until the end of storage. Pulp firmness of mature-green fruit declined during storage as a result of ripening. In ripe fruits such reduction occurred more slowly, since they were softer. The color of the pulp became intense red for mature fruits. Soluble solids were lower in ripe fruit at 21 degrees C, while in mature fruits at 10 degrees C, it increased. The titratable acidity increased in fruits stored at 10 degrees C. The fruits kept at 21 degrees C and the mature guavas kept at 10 degrees C showed no changes in ascorbic acid content. The ripe fruit at 10 degrees C maintained their ascorbic acid levels. Mature guavas, stored at 10 degrees C, had the longest shelf life and higher contents of soluble solids and titratable acidity, with no changes in total polyphenols extractable content and total antioxidant activity.

Models for genetic evaluation of Nelore cattle mature body weight

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Genetic associations of conformation, finishing precocity and muscling visual scores with mature weight in Nelore cattle

Were estimate (co)variance and genetic associations between conformation, finishing precocity and muscling visual scores measured at weaning (SCW, SFW and SMW, respectively) and yearling (SCY. SFY and SMY, respectively) with mature weight (MW) in Nelore cows, in order to predict the possible changes that inclusion of visual scores in beef cattle selection indices would bring to female mature weight. The data set contained records of 36,757 females, born between 1993 and 2006, belonging to the Jacarezinho cattle raising farm. (Co)variance components were estimated by bivariate animal models using Bayesian inference method through Gibbs sampling, assuming a linear model for MW and a nonlinear (threshold) model for conformation, finishing precocity and muscling visual scores. The first 10,000 rounds were considered as the burn-in period and discarded. The posterior means of direct heritability distributions were: 0.16 +/- 0.02 (SCW); 0.20 +/- 0.02 (SFW); 0.19 +/- 0.02 (SMW); 0.24 +/- 0.02 (SCY); 0.31 +/- 0.02 (SFY); 0.32 +/- 0.02 (SMY) and 0.46 +/- 0.04 (MW). Estimates of genetic correlations between visual scores and MW were positive and moderate, ranging from 0.27 +/- 0.06 to 0.36 +/- 0.04. Visual scores and MW should respond favorably to direct selection. Mature weight can be used in Nelore breeding programs designed to monitor the cows' size. Selection of animals with higher conformation, finishing precocity and muscling scores, especially at yearling, should promote an increase in cows' mature weight. (c) 2010 Elsevier B.V. All rights reserved.

Uso de renderização volumétrica e realidade virtual para problemas de percolação na engenharia

In the recovering process of oil, rock heterogeneity has a huge impact on how fluids move in the field, defining how much oil can be recovered. In order to study this variability, percolation theory, which describes phenomena involving geometry and connectivity are the bases, is a very useful model. Result of percolation is tridimensional data and have no physical meaning until visualized in form of images or animations. Although a lot of powerful and sophisticated visualization tools have been developed, they focus on generation of planar 2D images. In order to interpret data as they would be in the real world, virtual reality techniques using stereo images could be used. In this work we propose an interactive and helpful tool, named ZSweepVR, based on virtual reality techniques that allows a better comprehension of volumetric data generated by simulation of dynamic percolation. The developed system has the ability to render images using two different techniques: surface rendering and volume rendering. Surface rendering is accomplished by OpenGL directives and volume rendering is accomplished by the Zsweep direct volume rendering engine. In the case of volumetric rendering, we implemented an algorithm to generate stereo images. We also propose enhancements in the original percolation algorithm in order to get a better performance. We applied our developed tools to a mature field database, obtaining satisfactory results. The use of stereoscopic and volumetric images brought valuable contributions for the interpretation and clustering formation analysis in percolation, what certainly could lead to better decisions about the exploration and recovery process in oil fields

Genetic analysis of visual scores and their relationships to mature female weight in Nellore breed

Dados de 79.884 animais da raça Nelore foram utilizados para estimar parâmetros genéticos e avaliar as relações entre os escores de conformação, precocidade e musculatura obtidos à desmama e ao sobreano e o peso das fêmeas à idade adulta. Utilizou-se o método da máxima verossimilhança restrita, em análise multicaracterísticas, com modelo que incluiu os efeitos genéticos aditivos direto e residual, como aleatórios, e os efeitos fixos de grupo de contemporâneos e, como covariáveis, a idade do animal à pesagem e a idade da mãe ao parto (exceto para o peso das fêmeas à idade adulta). Os grupos contemporâneos à desmama foram definidos pelas variáveis: sexo, rebanho, ano e mês de nascimento, grupo de manejo ao nascimento e à desmama. Na definição de grupo contemporâneo ao sobreano também foi incluída a variável grupo de manejo ao sobreano. Para o peso das fêmeas à idade adulta, o grupo de contemporâneos foi composto por rebanho, ano de nascimento, grupo de manejo ao sobreano, ano e estação da pesagem. Os efeitos genético materno e de ambiente permanente materno também foram incluídos no modelo para análise dos escores de conformação, precocidade e musculatura à desmama. As estimativas de herdabilidade direta obtidas foram 0,18 ± 0,02 para o escore de conformação; 0,21 ± 0,01 para o escore de precocidade; 0,22 ± 0,01 para o escore de musculatura à desmama e 0,24 ± 0,01 para o escore de conformação; 0,27 ± 0,01 para o escore de precocidade; e 0,26 ± 0,01 para o escore de musculatura ao sobreano e 0,42 ± 0,02 para o peso das fêmeas à idade adulta. As correlações genéticas estimadas entre os escores visuais medidos à desmama e ao sobreano foram positivas, variando de média a alta magnitude (0,56 ± 0,03 a 0,85 ± 0,01). Por outro lado, as correlações genéticas estimadas entre os escores visuais e o peso das fêmeas à idade adulta foram positivas e moderadas, variando de 0,21 ± 0,03 a 0,35 ± 0,03. Os resultados obtidos indicam que a seleção de animais com maiores escores visuais, principalmente ao sobreano, deve promover aumento do peso das fêmeas à idade adulta.

Genetic parameters and relationships of heifer pregnancy and age at first calving with weight gain, yearling and mature weight in Nelore cattle

The objectives of the current study were to investigate the additive genetic associations between heifer pregnancy at 16 months of age (HP16) and age at first calving (AFC) with weight gain from birth to weaning (WG), yearling weight (YW) and mature weight (MW), in order to verify the possibility of using the traits measured directly in females as selection criteria for the genetic improvement of sexual precocity in Nelore cattle. (Co)variance components were estimated by Bayesian inference using a linear animal model for AFC, WG, YW and MW and a nonlinear (threshold) animal model for HP16. The posterior means of direct heritability estimates were: 0.45 +/- 0.02; 0.10 +/- 0.01; 023 +/- 0.02; 0.36 +/- 0.01 and 0.39 +/- 0.04, for HP16, AFC, WG, YW and MW, respectively. Maternal heritability estimate for WG was 0.07 +/- 0.01. Genetic correlations estimated between HP16 and WG, YW and MW were 0.19 +/- 0.04; 0.25 +/- 0.06 and 0.14 +/- 0.05, respectively. The genetic correlations of AFC with WG, YW and MW were low to moderate and negative, with values of -0.18 +/- 0.06; -0.22 +/- 0.05 and -0.12 +/- 0.05, respectively. The high heritability estimated for HP16 suggests that this trait seem to be a better selection criterion for females sexual precocity than AFC. Long-term selection for animals that are heavier at young ages tends to improve the heifers sexual precocity evaluated by HP16 or AFC. Predicted breeding values for HP16 can be used to select bulls and it can lead to an improvement in sexual precocity. The inclusion of HP16 in a selection index will result in small or no response for females mature weight. (C) 2011 Elsevier B.V. All rights reserved.

Determination of fiber length and juvenile and mature wood zones from Hevea brasiliensis trees grown in Brazil

The aim of this study was to verify the average fiber length and the juvenile and mature wood zones from Hevea brasiliensis proveniences from a reforestation area in São Paulo, Brazil. For this purpose, five Hevea brasiliensis trees were randomly collected from a 50-year-old plantation, located in Balsamo, São Paulo, Brazil. The trees were cut and five flat sawn boards were obtained. The juvenile and mature wood zones were determined by fiber length measurement from the pith to the bark. The results showed that: (a) the juvenile wood of this species occurred approx. between 40 and 55 mm, from the pith, and from this point forward, the mature wood zone was found; (b) there was a significant difference between the average fiber length of juvenile wood (1.26 mm) and mature wood (1.51 mm).

Estimation and evaluation of dynamic properties as indicators of changes on soil structure in sugarcane fields of São Paulo State - Brazil

The indiscriminate management and use of soils without moisture control has changed the structure of it due to the increment of the traffic by agricultural machines through the years, causing in consequence, a soil compaction and yield reduction in the areas of intensive traffic. The purpose of this work was to estimate and to evaluate the performance of preconsolidation pressure of the soil and shear stress as indicators of changes on soil structure in fields cropped with sugarcane, as well as the impact of management processes in an Eutrorthox soil structure located in São Paulo State. The experimental field was located in Piracicaba's rural area (São Paulo State, Brazil) and has been cropped with sugarcane, in the second harvest cycle. The soil was classified by Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) [Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA), 1999. Centro Nacional de Pesquisa de Solos. Sistema Brasileiro de Classificao de Solos, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA), Brasilia, 412 pp.] as an Eutrorthox. Undisturbed samples were collected and georeferenced in a grid of 60 m x 60 m from two depths: 0-0.10 m (superficial layer - SL) and in the layer of greatest mechanical resistance (LGMR), previously identified by cone index (CI). The investigated variables were pressure preconsolidation (sigma(p)), apparent cohesion (c) and internal friction angle (phi). The conclusions from the results were that the SLSC was predicted satisfactorily from up as a function of soil moisture; thus, decisions about machinery size and loading (contact pressures) can be taken. Apparent cohesion (c), internal friction angle (phi) and the Coulomb equation were significantly altered by traffic intensity. The sigma(p), c and phi maps were shown to be important tools to localize and visualize soil compaction and mechanical resistance zones. They constitute a valuable resource to evaluate the traffic impact in areas cropped with sugarcane in State of São Paulo, Brazil. (C) 2008 Elsevier B.V. All rights reserved.

Modelagem dinâmica do escoamento de um sistema de elevação por plunger lift

A critical problem in mature gas wells is the liquid loading. As the reservoir pressure decreases, gas superficial velocities decreases and the drag exerted on the liquid phase may become insufficient to bring all the liquid to the surface. Liquid starts to drain downward, flooding the well and increasing the backpressure which decreases the gas superficial velocity and so on. A popular method to remedy this problem is the Plunger Lift. This method consists of dropping the "plunger"to the bottom of the tubing well with the main production valve closed. When the plunger reaches the well bottom the production valve is opened and the plunger carry the liquid to the surface. However, models presented in literature for predicting the behavior in plunger lift are simplistic, in many cases static (not considering the transient effects). Therefore work presents the development and validation of a numerical algorithm to solve one-dimensional compressible in gas wells using the Finite Volume Method and PRIME techniques for treating coupling of pressure and velocity fields. The code will be then used to develop a dynamic model for the plunger lift which includes the transient compressible flow within the well

Aperfeiçoamento no projeto de um protótipo de misturador-decantador à inversão de fases visando aplicação na indústria do petróleo

In the oil industry the mixture oil/water occurs in the operations of production, transportation and refining, as well as during the use of its derivatives. The amount of water produced associated with the oil varies and can reach values of 90% in volume in the case of mature phase of the production fields. The present work deals with the development of new design of the Mixer Settler based on Phase Inversion (MDIF) in a laboratory scale. We envisage this application in industrial scale so the phases of project, construction and operation are considered. The modifications most significant, in comparison with the original prototype, include the materials of construction and the substitution of the equipment used in the mixing stage of the process. It was tested the viability of substitution of the original system of mechanical mixing by a static mixer. A statistical treatment by means of an experimental design of composed central type was used in order to evaluate the behavior of the main variables of the separation process as function of the efficiency of separation for the new device. This procedure is useful to delimit an optimal region of operation with the equipment. The variables of process considered on the experimental design were: oil concentration in the feeding water (mg/L); Total volumetric flow rate (L/h); Ratio organic/water on volumetric basis (O/A). The separation efficiency is calculated by comparison of the content of oil and greases in the inlet and outlet of the equipment. For determination of TOG (Total Oil and Grease), the method used was based in the absorption of radiation in the infra-red region. The equipment used for these determinations was InfraCal® TOG/TPH Model HATR-T2 of the Wilks Enterprise, Incorporation. It´s important to stand out that this method of measure has being used by PETROBRAS S.A. Results of global efficiency of separation oil/water varied from 75.3 to 97.7% for contaminated waters containing up to 1664,1 mg/L of oil. By means of tests carried out with a real sample of contaminated water supplied by PETROBRAS we have got an effluent specified in terms of the legal standards required for discharging. Thus, the new design of equipment constitutes a real alternative for the conventional systems of treatment of produced water in the oil industry

Modelagem da transferência de massa na remoção do óleo da água produzida por flotação em coluna com uso de tensoativos de origem vegetal

The treatment of oil produced water and its implications are continually under investigation and several questions are related to this subject. In the Northeast Region Brazil, the onshore reservoirs are, in its majority, mature oil fields with high production of water. As this oil produced water has high levels of oil, it cannot be directly discarded into the environment because it represents a risk for contamination of soil, water, and groundwater, or even may cause harm to living bodies. Currently, polyelectrolytes that promote the coalescence of the oil droplets are used to remove the dispersed oil phase, enhancing the effectiveness of the flotation process. The non-biodegradability and high cost of polyelectrolytes are limiting factors for its application. On this context, it is necessary to develop studies for the search of more environmentally friendly products to apply in the flotation process. In this work it is proposed the modeling of the flotation process, in a glass column, using surfactants derived from vegetal oils to replace the polyelectrolytes, as well as to obtain a model that represents the experimental data. In addition, it was made a comparative study between the models described in the literature and the one developed in this research. The obtained results showed that the developed model presented high correlation coefficients when fitting the experimental data (R2 > 0.98), thus proving its efficiency in modeling the experimental data.

Physical and chemical changes in juvenile and mature woods of Pinus elliottii var. elliottii by thermal modification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)