Thermal model for charring rate calculation in wooden cellular slabs under fire

Wood is a natural and traditional building material, as popular today as ever, and presents advantages. Physically, wood is strong and stiff, but compared with other materials like steel is light and flexible. Wood material can absorb sound very effectively and it is a relatively good heat insulator. But dry wood burns quite easily and produces a great deal of heat energy. The main disadvantage is the high level of combustion when exposed to fire, where the point at which it catches fire is from 200–400°C. After fire exposure, is need to determine if the charred wooden structures are safe for future use. Design methods require the use of computer modelling to predict the fire exposure and the capacity of structures to resist those action. Also, large or small scale experimental tests are necessary to calibrate and verify the numerical models. The thermal model is essential for wood structures exposed to fire, because predicts the charring rate as a function of fire exposure. The charring rate calculation of most structural wood elements allows simple calculations, but is more complicated for situations where the fire exposure is non-standard and in wood elements protected with other materials. In this work, the authors present different case studies using numerical models, that will help professionals analysing woods elements and the type of information needed to decide whether the charred structures are adequate or not to use. Different thermal models representing wooden cellular slabs, used in building construction for ceiling or flooring compartments, will be analysed and submitted to different fire scenarios (with the standard fire curve exposure). The same numerical models, considering insulation material inside the wooden cellular slabs, will be tested to compare and determine the fire time resistance and the charring rate calculation.

A software tool for accurate assessment of costs and CO2 emissions in wood transport using OpenStreetMap©

Costs and environmental impacts are key elements in forest logistics and they must be integrated in forest decision-making. The evaluation of transportation fuel costs and carbon emissions depend on spatial and non-spatial data but in many cases the former type of data are dicult to obtain. On the other hand, the availability of software tools to evaluate transportation fuel consumption as well as costs and emissions of carbon dioxide is limited. We developed a software tool that combines two empirically validated models of truck transportation using Digital Elevation Model (DEM) data and an open spatial data tool, specically OpenStreetMap©. The tool generates tabular data and spatial outputs (maps) with information regarding fuel consumption, cost and CO2 emissions for four types of trucks. It also generates maps of the distribution of transport performance indicators (relation between beeline and real road distances). These outputs can be easily included in forest decision-making support systems. Finally, in this work we applied the tool in a particular case of forest logistics in north-eastern Portugal

NOR network transduction procedures : "merging of gates" and "substitution of gates" for fan-in and fan-out restricted networks, NETTRA-G3-FIFO and NETTRA-PG1-FIFO /

"December 1974."--T.p.

CLEOPATRA-comprehensive language for elegant operating systems and translator design /

Mode of access: Internet.

Proceedings and transactions of the Royal Society of Canada. Déliberations et mémoires de la Société royale du Canada.

French title varies: 1882/83-<1965> Mémoires et comptes rendus de la Société royale du Canada; <1972-> Délibérations et mémoires de la Société royale du Canada.

Out-of-School English and the possible effect it has on Second Language Acquisition : - a study on how students with different backgrounds acquire the English language outside of school

Second language acquisition is a field that has fascinated linguists for numerous years and is a topic that is very much connected to how English teachers in Sweden try to teach the English language to the students in their classrooms. In 2009 Sundqvist examined what possible effects extramural English could have on learners' oral proficiency and their vocabulary. In her study she found out that extramural English “is an independent variable and a possible path to progress in English” (Sundqvist, 2009, p. i).  In 2014, three Swedish secondary- and upper secondary school teachers started a project for the Erasmus+. These three teachers tried to create better teaching conditions and to come up with new methods for teaching English. During their investigation they noticed that students who had only been in Sweden for four years or less, seemed to get less exposed to English in their spare time than native Swedish students, which created a disadvantage for them. Since the time when these two studies were carried out, the number of immigrants has increased drastically, which creates the need for further investigation within this area of second language acquisition. In this study, I therefore investigate how much and in what way students come in contact with the English language outside of school. I also examine if there are any differences between native Swedish students versus non-native Swedish students and if so, how this might affect the students and their grades in English. The study was conducted through the use of questionnaires and through observations of different teaching situations, including the participating teachers' methods and the participating students' reactions. The results show that there are differences between native- and non-native students when it comes to extramural English activities. The results also show that these differences seem to affect the students' grades in English, in favour of the native Swedish students. The native students tend to spend more time on extramural English activities, especially in connection to the Internet and computer games, than the non-native students. These results indicate that something needs to be done in order to compensate for the non-native students' disadvantage.

Quantification of the magnification and distortion effects of a pediatric flexible video-bronchoscope

Background: Flexible video bronchoscopes, in particular the Olympus BF Type 3C160, are commonly used in pediatric respiratory medicine. There is no data on the magnification and distortion effects of these bronchoscopes yet important clinical decisions are made from the images. The aim of this study was to systematically describe the magnification and distortion of flexible bronchoscope images taken at various distances from the object. Methods: Using images of known objects and processing these by digital video and computer programs both magnification and distortion scales were derived. Results: Magnification changes as a linear function between 100 mm ( x 1) and 10 mm ( x 9.55) and then as an exponential function between 10 mm and 3 mm ( x 40) from the object. Magnification depends on the axis of orientation of the object to the optic axis or geometrical axis of the bronchoscope. Magnification also varies across the field of view with the central magnification being 39% greater than at the periphery of the field of view at 15 mm from the object. However, in the paediatric situation the diameter of the orifices is usually less than 10 mm and thus this limits the exposure to these peripheral limits of magnification reduction. Intraclass correlations for measurements and repeatability studies between instruments are very high, r = 0.96. Distortion occurs as both barrel and geometric types but both types are heterogeneous across the field of view. Distortion of geometric type ranges up to 30% at 3 mm from the object but may be as low as 5% depending on the position of the object in relation to the optic axis. Conclusion: We conclude that the optimal working distance range is between 40 and 10 mm from the object. However the clinician should be cognisant of both variations in magnification and distortion in clinical judgements.

Modelling of different measures for improving removal in a stormwater pond

The effect of retrofitting an existing pond on removal efficiency and hydraulic performance was modelled using the commercial software Mike21 and compartmental modelling. The Mike21 model had previously been calibrated on the studied pond. Installation of baffles, the addition of culverts under a causeway and removal of an existing island were all studied as possible improvement measures in the pond. The subsequent effect on hydraulic performance and removal of. suspended solids was then evaluated. Copper, cadmium, BOD, nitrogen and phosphorus removal were,also investigated for that specific improvement measure showing the best results. Outcomes of this study reveal that all measures increase the removal efficiency of suspended solids. The hydraulic efficiency is improved for all cases, except for the case where the island is removed. Compartmental modelling was also used to evaluate hydraulic performance and facilitated a better understanding of the way each of the different measures affected the flow pattern and performance. It was concluded that the installation of baffles is the best of the studied measures resulting in a reduction in the annual load on the receiving lake by approximately 8,000 kg of suspended solids (25% reduction of the annual load), 2 kg of copper (10% reduction of the annual load) and 600 kg of BOD (10% reduction of the annual load).

Single patient (n-of-1) trials with binary treatment preference

The use of a fully parametric Bayesian method for analysing single patient trials based on the notion of treatment 'preference' is described. This Bayesian hierarchical modelling approach allows for full parameter uncertainty, use of prior information and the modelling of individual and patient sub-group structures. It provides updated probabilistic results for individual patients, and groups of patients with the same medical condition, as they are sequentially enrolled into individualized trials using the same medication alternatives. Two clinically interpretable criteria for determining a patient's response are detailed and illustrated using data from a previously published paper under two different prior information scenarios. Copyright (C) 2005 John Wiley & Sons, Ltd.

Analysis of cardiac ventricular wall motion based on a three-dimensional electromechanical biventricular model

This paper describes a biventricular model, which couples the electrical and mechanical properties of the heart, and computer simulations of ventricular wall motion and deformation by means of a biventricular model. In the constructed electromechanical model, the mechanical analysis was based on composite material theory and the finite-element method; the propagation of electrical excitation was simulated using an electrical heart model, and the resulting active forces were used to calculate ventricular wall motion. Regional deformation and Lagrangian strain tensors were calculated during the systole phase. Displacements, minimum principal strains and torsion angle were used to describe the motion of the two ventricles. The simulations showed that during the period of systole, (1) the right ventricular free wall moves towards the septum, and at the same time, the base and middle of the free wall move towards the apex, which reduces the volume of the right ventricle; the minimum principle strain (E3) is largest at the apex, then at the middle of the free wall and its direction is in the approximate direction of the epicardial muscle fibres; (2) the base and middle of the left ventricular free wall move towards the apex and the apex remains almost static; the torsion angle is largest at the apex; the minimum principle strain E3 is largest at the apex and its direction on the surface of the middle wall of the left ventricle is roughly in the fibre orientation. These results are in good accordance with results obtained from MR tagging images reported in the literature. This study suggests that such an electromechanical biventricular model has the potential to be used to assess the mechanical function of the two ventricles, and also could improve the accuracy ECG simulation when it is used in heart torso model-based body surface potential simulation studies.

Modelling comminution patterns within a pilot scale AG/SAG mill

The patterns of rock comminution within tumbling mills, as well as the nature of forces, are of significant practical importance. Discrete element modelling (DEM) has been used to analyse the pattern of specific energy applied to rock, in terms of spatial distribution within a pilot AG/SAG mill. We also analysed in some detail the nature of the forces, which may result in rock comminution. In order to examine the distribution of energy applied within the mill, the DEM models were compared with measured particle mass losses, in small scale AG and SAG mill experiments. The intensity of contact stresses was estimated using the Hertz theory of elastic contacts. The results indicate that in the case of the AG mill, the highest intensity stresses and strains are likely to occur deep within the charge, and close to the base. This effect is probably more pronounced for large AG mills. In the SAG mill case, the impacts of the steel balls on the surface of the charge are likely to be the most potent. In both cases, the spatial pattern of medium-to-high energy collisions is affected by the rotational speed of the mill. Based on an assumed damage threshold for rock, in terms of specific energy introduced per single collision, the spatial pattern of productive collisions within each charge was estimated and compared with rates of mass loss. We also investigated the nature of the comminution process within AG vs. SAG mill, in order to explain the observed differences in energy utilisation efficiency, between two types of milling. All experiments were performed using a laboratory scale mill of 1.19 m diameter and 0.31 m length, equipped with 14 square section lifters of height 40 mm. (C) 2006 Elsevier Ltd. All rights reserved.

Using context and preferences to implement self-adapting pervasive computing applications

Applications that exploit contextual information in order to adapt their behaviour to dynamically changing operating environments and user requirements are increasingly being explored as part of the vision of pervasive or ubiquitous computing. Despite recent advances in infrastructure to support these applications through the acquisition, interpretation and dissemination of context data from sensors, they remain prohibitively difficult to develop and have made little penetration beyond the laboratory. This situation persists largely due to a lack of appropriately high-level abstractions for describing, reasoning about and exploiting context information as a basis for adaptation. In this paper, we present our efforts to address this challenge, focusing on our novel approach involving the use of preference information as a basis for making flexible adaptation decisions. We also discuss our experiences in applying our conceptual and software frameworks for context and preference modelling to a case study involving the development of an adaptive communication application.

Assessing the Conservation Status and Threats to Priority Plants: a threat assessment approach and case study in South-East Queensland, Australia

bstract: During the Regional Forest Agreement (RFA) process in south-east Queensland, the conservation status of, and threats to, priority vascular plant taxa in the region was assessed. Characteristics of biology, demography and distribution were used to assess the species' intrinsic risk of extinction. In contrast, the threats to the taxa (their extrinsic risk of extinction) were assessed using a decision-support protocol for setting conservation targets for taxa lacking population viability analyses and habitat modelling data. Disturbance processes known or suspected to be adversely affecting the taxa were evaluated for their intensity, extent and time-scale. Expert opinion was used to provide much of the data and to assess the recommended protection areas. Five categories of intrinsic risk of extinction were recognised for the 105 priority taxa: critically endangered (43 taxa); endangered (29); vulnerable (21); rare (10); and presumed extinct (2). Only 6 of the 103 extant taxa were found to be adequately reserved and the majority were considered inadequately protected to survive the current regimes of threatening processes affecting them. Data were insufficient to calculate a protection target for one extant taxon. Over half of the taxa require all populations to be conserved as well as active management to alleviate threatening processes. The most common threats to particular taxa were competition from weeds or native species, inappropriate fire regimes, agricultural clearing, forestry, grazing by native or feral species, drought, urban development, illegal collection of plants, and altered hydrology. Apart from drought and competition from native species, these disturbances are largely influenced or initiated by human actions. Therefore, as well as increased protection of most of the taxa, active management interventions are necessary to reduce the effects of threatening processes and to enable the persistence of the taxa.