Banana and abaca fiber-reinforced plastic composites obtained by rotational molding process

Natural fibers can be used in rotational molding process to obtain parts with improved mechanical properties. Different approaches have been followed in order to produce formulations containing banana or abaca fiber at 5% weight, in two- and three-layer constructions. Chemically treated abaca fiber has also been studied, causing some problems in processability. Fibers used have been characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), optical microscopy, and single-fiber mechanical tests. Rotomolded parts have been tested for tensile, flexural, and impact properties, demonstrating that important increases in elastic modulus are achieved with these fibers, although impact properties are reduced. © 2013 Copyright Taylor and Francis Group, LLC.

A bio-coke for anode production and the manufacturing method thereof

Dans l’industrie de l’aluminium, le coke de pétrole calciné est considéré comme étant le composant principal de l’anode. Une diminution dans la qualité du coke de pétrole a été observée suite à une augmentation de sa concentration en impuretés. Cela est très important pour les alumineries car ces impuretés, en plus d’avoir un effet réducteur sur la performance des anodes, contaminent le métal produit. Le coke de pétrole est aussi une source de carbone fossile et, durant sa consommation, lors du processus d’électrolyse, il y a production de CO2. Ce dernier est considéré comme un gaz à effet de serre et il est bien connu pour son rôle dans le réchauffement planétaire et aussi dans les changements climatiques. Le charbon de bois est disponible et est produit mondialement en grande quantité. Il pourrait être une alternative attrayante pour le coke de pétrole dans la fabrication des anodes de carbone utilisées dans les cuves d’électrolyse pour la production de l’aluminium. Toutefois, puisqu’il ne répond pas aux critères de fabrication des anodes, son utilisation représente donc un grand défi. En effet, ses principaux désavantages connus sont sa grande porosité, sa structure désordonnée et son haut taux de minéraux. De plus, sa densité et sa conductivité électrique ont été rapportées comme étant inférieures à celles du coke de pétrole. L’objectif de ce travail est d’explorer l’effet du traitement de chaleur sur les propriétés du charbon de bois et cela, dans le but de trouver celles qui s’approchent le plus des spécifications requises pour la production des anodes. L’évolution de la structure du charbon de bois calciné à haute température a été suivie à l’aide de différentes techniques. La réduction de son contenu en minéraux a été obtenue suite à des traitements avec de l’acide chlorhydrique utilisé à différentes concentrations. Finalement, différentes combinaisons de ces deux traitements, calcination et lixiviation, ont été essayées dans le but de trouver les meilleures conditions de traitement.

Modelling of water removal during a paper vacuum dewatering process using a Level-Set method

Water removal in paper manufacturing is an energy-intensive process. The dewatering process generally consists of four stages of which the first three stages include mechanical water removal through gravity filtration, vacuum dewatering and wet pressing. In the fourth stage, water is removed thermally, which is the most expensive stage in terms of energy use. In order to analyse water removal during a vacuum dewatering process, a numerical model was created by using a Level-Set method. Various different 2D structures of the paper model were created in MATLAB code with randomly positioned circular fibres with identical orientation. The model considers the influence of the forming fabric which supports the paper sheet during the dewatering process, by using volume forces to represent flow resistance in the momentum equation. The models were used to estimate the dry content of the porous structure for various dwell times. The relation between dry content and dwell time was compared to laboratory data for paper sheets with basis weights of 20 and 50 g/m2 exposed to vacuum levels between 20 kPa and 60 kPa. The comparison showed reasonable results for dewatering and air flow rates. The random positioning of the fibres influences the dewatering rate slightly. In order to achieve more accurate comparisons, the random orientation of the fibres needs to be considered, as well as the deformation and displacement of the fibres during the dewatering process.

Involving individuals in the manufacturing strategy formation : Strategic consensus among workers and managers

Decisions made and actions taken by individuals in the operations function impact the formation of a company’s manufacturing strategy (MS). Therefore, it is important that the MS is understood and agreed on by all employees, that is, strategic consensus among the individuals in the operations function is essential. This research contributes to the current body of knowledge by including a workers’ perspective on MS formation. It is the workers on the shop floor who bring the MS to life in the actual operations through their daily decisions and actions. The MS falls short if the priorities outlined do not materialise in practice as intended. The purpose of this research is to investigate how the individuals in the operations function perceive the MS in order to understand how these individuals are involved in the MS formation. The research is based on five studies, differing by evidence, as follows: one theoretical, three qualitative in the setting of small and medium-sized enterprises (SMEs), and one quantitative at a large company. Based on the findings presented in the six appended papers, the results show that empirically and conceptually, workers have been overlooked or given a passive role in the MS formation. Empirically, it is seen that workers and managers do not have a shared understanding of the underlying reasons for strategic priorities; hence, the level of strategic consensus is low. Furthermore, the level of strategic consensus varies among the different MS dimensions depending on their organisational level. Moreover, the empirical findings reveal that internal contextual factors influence the individuals’ perceptions of the MS and the possibilities for strategic consensus. Regarding the external context, the results show that major customers’ strategies influence the subcontractor SMEs’ MS formation. The usage of means of communication in the operations function has also shown to be of importance for how the MS is perceived. Conceptually, the findings indicate that the MS literature tends to treat individuals in the operations function in a deterministic manner; individuals on the shop floor are regarded as manufacturing resources. To ensure a successful MS formation process, where the patterns of the decisions made by the individuals in the operations function forms the MS, the view on human nature within the MS requires a more voluntaristic approach. This research suggests to view the MS formation as an iterative “patterning process” which builds on a reciprocal relationship between workers and managers. The introduction of the patterning process contributes to the research on MS formation by explaining the perception range within the hierarchical levels, by re-defining the hierarchical levels included in the MS formation and by detailing the activities in the MS formation.

World class manufacturing: criando estabilidade nos 4M's: expedição

Atualmente, as empresas deparam-se com uma enorme competitividade dos mercados. Esta competitividade faz com que as empresas sejam obrigadas a reagir, através da redução de custos, maior qualidade, redução de desperdícios e processos produtivos mais aptos às necessidades dos clientes. De facto, o grande objetivo de qualquer empresa é a criação de valor para o cliente. É necessário disponibilizar o produto certo, na quantidade certa, no tempo certo e ao custo mínimo, contribuindo de forma eficiente para a melhoria do serviço ao cliente. Por forma a melhorar o serviço ao cliente, as empresas sentem cada vez mais necessidade de recorrer à estabilidade dos processos. O presente projeto tem como principal objetivo a criação de estabilidade nos processos da expedição de uma empresa de argamassas industriais, através do uso de ferramentas pertencentes ao programa World Class Manufacturing com base na filosofia Lean Thinking. Primeiramente, foi utilizado o Value Stream Mapping por forma a representar visualmente as etapas envolvidas nos fluxos de valor da expedição. Depois de calculados os indicadores referentes aos processos da expedição e identificação dos problemas, usaram-se as ferramentas “5 Porquês” e diagrama de Ishikawa para se identificarem as causas raiz dos mesmos. Como contramedida ao combate às causas raiz dos problemas, utilizou-se a ferramenta SMED, comparando o tempo de carga de um camião a um setup. Foram usadas como exemplo duas situações que retratam na íntegra os problemas que ocorrem na área da expedição da empresa. Como plano de ação, reorganizou-se o armazém de preparação de encomendas e utilizou-se a ferramenta Kanban como forma de auxílio no reabastecimento do armazém de preparação de encomendas. Após a implementação, foi feito o seguimento do plano de ações, do método de trabalho e dos indicadores Apesar de não terem sido atingidos todos os objetivos propostos no início do projeto, verificaram-se melhorias em todos os processos da expedição.

Developing smart services by Internet of Things in manufacturing business

Manufacturing companies have passed from selling uniquely tangible products to adopting a service-oriented approach to generate steady and continuous revenue streams. Nowadays, equipment and machine manufacturers possess technologies to track and analyze product-related data for obtaining relevant information from customers’ use towards the product after it is sold. The Internet of Things on Industrial environments will allow manufacturers to leverage lifecycle product traceability for innovating towards an information-driven services approach, commonly referred as “Smart Services”, for achieving improvements in support, maintenance and usage processes. The aim of this study is to conduct a literature review and empirical analysis to present a framework that describes a customer-oriented approach for developing information-driven services leveraged by the Internet of Things in manufacturing companies. The empirical study employed tools for the assessment of customer needs for analyzing the case company in terms of information requirements and digital needs. The literature review supported the empirical analysis with a deep research on product lifecycle traceability and digitalization of product-related services within manufacturing value chains. As well as the role of simulation-based technologies on supporting the “Smart Service” development process. The results obtained from the case company analysis show that the customers mainly demand information that allow them to monitor machine conditions, machine behavior on different geographical conditions, machine-implement interactions, and resource and energy consumption. Put simply, information outputs that allow them to increase machine productivity for maximizing yields, save time and optimize resources in the most sustainable way. Based on customer needs assessment, this study presents a framework to describe the initial phases of a “Smart Service” development process, considering the requirements of Smart Engineering methodologies.

Modular continuous crystallizer: operation, experimental arrangement and identification of process parameters

Crystallization is employed in different industrial processes. The method and operation can differ depending on the nature of the substances involved. The aim of this study is to examine the effect of various operating conditions on the crystal properties in a chemical engineering design window with a focus on ultrasound assisted cooling crystallization. Batch to batch variations, minimal manufacturing steps and faster production times are factors which continuous crystallization seeks to resolve. Continuous processes scale-up is considered straightforward compared to batch processes owing to increase of processing time in the specific reactor. In cooling crystallization process, ultrasound can be used to control the crystal properties. Different model compounds were used to define the suitable process parameters for the modular crystallizer using equal operating conditions in each module. A final temperature of 20oC was employed in all experiments while the operating conditions differed. The studied process parameters and configuration of the crystallizer were manipulated to achieve a continuous operation without crystal clogging along the crystallization path. The results from the continuous experiment were compared with the batch crystallization results and analysed using the Malvern Morphologi G3 instrument to determine the crystal morphology and CSD. The modular crystallizer was operated successfully with three different residence times. At optimal process conditions, a longer residence time gives smaller crystals and narrower CSD. Based on the findings, at a constant initial solution concentration, the residence time had clear influence on crystal properties. The equal supersaturation criterion in each module offered better results compared to other cooling profiles. The combination of continuous crystallization and ultrasound has large potential to overcome clogging, obtain reproducible and narrow CSD, specific crystal morphologies and uniform particle sizes, and exclusion of milling stages in comparison to batch processes.

Implementation and Operation of Collaborative Manufacturing Networks

Part 6: Engineering and Implementation of Collaborative Networks

Prediction of ductile failure in CP-Titanium as criterion of SPD process design

Application of damage model in combination with finite element analysis to design and optimization of equal channel angular pressing - conform of commercially pure titanium against ductile failure is demonstrated. The properties required for precise simulation of the process and prediction of damage accumulation (equivalent stress as function of equivalent strain and temperature and low bound ductility function) are obtained in the temperature interval 20-400 °C and described in details.

Design for additive manufacturing: trends, opportunities, considerations, and constraints

The past few decades have seen substantial growth in Additive Manufacturing (AM) technologies. However, this growth has mainly been process-driven. The evolution of engineering design to take advantage of the possibilities afforded by AM and to manage the constraints associated with the technology has lagged behind. This paper presents the major opportunities, constraints, and economic considerations for Design for Additive Manufacturing. It explores issues related to design and redesign for direct and indirect AM production. It also highlights key industrial applications, outlines future challenges, and identifies promising directions for research and the exploitation of AM's full potential in industry.

Additive manufacturing in the cycling industry: mainstream or gimmick?

INTRODUCTION. Additive manufacturing (AM) for various industries has been trailed, prototyped and used in limited production runs (Gibson, 2015). But considering additive manufacturing with metallic materials has been around for over 15 years the penetration into an industry such as cycling that values customisation and progressive design techniques has been quite limited. This case study looks at the potential of and why additive manufacturing has not progressed from concept development and prototyping into production and mainstream. Selective Laser Melting (SLM) additive manufacturing systems mainly use Stainless Steel 316 (SS316) and Titanium 6Al.4V (Ti64) as a baseline material; both these materials are extremely common in the custom and high volume bike industries. For the purposes of this article we will focus on smaller custom bike manufacturers who are typically more agile and open to high levels of customisation in their products. The study finds that whilst a high number of companies will experiment and prototype with additive manufacturing there is little evidence that the design and development process translates to ongoing production for sale to the consumer, this could be due to knowledge of design and fabrication techniques.

Improving IT process management through value stream mapping approach: A case study

Value-Stream mapping (VSM) is a helpful tool to identify waste and improvement areas. It has emerged as a preferred way to support and implement the lean approach. While lean principles are well-established and have broad applicability in manufacturing, their extension to information technology is still limited. Based on a case study approach, this paper presents the implementation of VSM in an IT firm as a lean IT improvement initiative. It involves mapping the current activities of the firm and identifying opportunities for improvement. After several interviews with employees who are currently involved in the process, current state map is prepared to describe the existing problem areas. Future state map is prepared to show the proposed improvement action plans. The achievements of VSM implementation are reduction in lead time, cycle time and resources. Our finding indicates that, with the new process change, total lead time can be reduced from 20 days to 3 days – 92% reduction in overall lead time for database provisioning process.

The role of additive manufacturing in patient specific solutions

This dissertation investigates de role of the new additive manufacturing techniques in the treatment of pathologies with a patient-specific approach. Throughout this work the development methodology of these said products is explained in order to understand the different stages required to achieve a tailor made solution. The goal is to demonstrate the importance of the manufacturing technique and its capabilities to tailor-fit devices to patients and the adaptability of the process to tackle the most diverse situations. Three real cases are documented in order to prove the viability of the method and to showcase its advantages. Whenever possible patient-specific solutions are compared to their “off-the-shelf” counterparts in order to establish the pros and cons of each one of them. The dissertation is an insight into a possible future for the medical devices industry, where customization is expected to be the standard approach in the treatment of patients.

A transformation technique to estimate the process capability index for non-normal processes

Estimating the process capability index (PCI) for non-normal processes has been discussed by many researches. There are two basic approaches to estimating the PCI for non-normal processes. The first commonly used approach is to transform the non-normal data into normal data using transformation techniques and then use a conventional normal method to estimate the PCI for transformed data. This is a straightforward approach and is easy to deploy. The alternate approach is to use non-normal percentiles to calculate the PCI. The latter approach is not easy to implement and a deviation in estimating the distribution of the process may affect the efficacy of the estimated PCI. The aim of this paper is to estimate the PCI for non-normal processes using a transformation technique called root transformation. The efficacy of the proposed technique is assessed by conducting a simulation study using gamma, Weibull, and beta distributions. The root transformation technique is used to estimate the PCI for each set of simulated data. These results are then compared with the PCI obtained using exact percentiles and the Box-Cox method. Finally, a case study based on real-world data is presented.

A transformation-based multivariate chart to monitor process dispersion

Multivariate monitoring techniques such as multivariate control charts are used to control the processes that contain more than one correlated characteristic. Although the majority of previous researches are focused on controlling only the mean vector of multivariate processes, little work has been performed to monitor the covariance matrix. In this research, a new method is presented to detect possible shifts in the covariance matrix of multivariate processes. The basis of the proposed method is to eliminate the correlation structure between the quality characteristics by transformation technique and then use an S chart for each variable. The performance of the proposed method is then compared to the ones from other existing methods and a real case is presented.