Redescription of the type-material of creptotrema creptotrema travassos, Artigas & Pereira, 1928 (Digenea, Allocreadiidae)

Creptotrema creptotrema Travassos, Artigas & Pereira, 1928, a digenetic trematode parasite of Leporinus elongatus, is redescribed from the type-material with additional morphological data and original figures.

Extracción de parámetros de un resonador FBAR por optimización

L’objectiu d’aquest projecte que consisteix a elaborar un algoritme d’optimització que permeti, mitjançant un ajust de dades per mínims quadrats, la extracció dels paràmetres del circuit equivalent que composen el model teòric d’un ressonador FBAR, a partir de les mesures dels paràmetres S. Per a dur a terme aquest treball, es desenvolupa en primer lloc tota la teoria necessària de ressonadors FBAR. Començant pel funcionament i l’estructura, i mostrant especial interès en el modelat d’aquests ressonadors mitjançant els models de Mason, Butterworth Van-Dyke i BVD Modificat. En segon terme, s’estudia la teoria sobre optimització i programació No-Lineal. Un cop s’ha exposat la teoria, es procedeix a la descripció de l’algoritme implementat. Aquest algoritme utilitza una estratègia de múltiples passos que agilitzen l'extracció dels paràmetres del ressonador.

Study of some parameters affecting the in vitro cultivation of Plasmodium falciparum within saimiri sciureus red blood cells

The in vitro growth and multiplication of the erythrocytic stages of Plasmodium falciparum within Saimiri sciureus (squirrel monkey) red blood cells have been studied. Various parameters, such as the origin of the red blood cells and serum supplement, nature of the buffer, influence of the final pH of the medium, role of proteose peptone and glucose addition, were investigated. The selection of the best culture conditions led to the obtention of a reproducible in vitro growth of two parasite cycles in Saimiri erythrocytes, which is an useful achievement for in vitro studies. Our failure to establish a continuous culture line for longer than 19 days, could be explained by a dramatic increasing of osmotic fragility of the Saimiri red blood cells related to their small size.

Desenvolupament d'interfícies HW per a FPGA des de Matlab

Aquest projecte consisteix en el desenvolupament d’estructures hardware digitals, sintetitzables sobre FPGA i realitzades des d’un entorn gràfic de disseny a nivell de sistema (alt nivell). S'ha escollit el Simulink (entorn gràfic que treballa sobre el software matemàtic Matlab de Mathworks) com a entorn de disseny, i que gràcies a la interfície proporcionada per Altera (DSPBuilder) és capaç de generar codi VHDL sintetitzable. Concretament ens centrarem en la gestió d’un sistema capturador d'imatges de comptadors del cabal d'aigua, en el qual volem fer la caracterització del comptador. Aquest capturador consta bàsicament d'un sensor d'imatge i una FPGA. En aquesta caracterització el que es pretén es ajustar els diferents paràmetres del sistema per fer que la lectura sigui òptima per a cada model de comptador que existeixen al mercat, com ara l'exposició del sensor, el guany d'un color, la realització d'un filtrat de la imatge, etc.

The biophysical perspective of a middle income economy: material flows in Mexico

We analyse natural resource use dynamics in the Mexican economy during the last three decades. Despite low and uneven economic growth, the extraction and use of materials in the Mexican economy has continuously increased during the last 30 years. In this period, population growth rather than economic growth was the main driving force for biophysical growth. In addition, fundamental changes have taken place in the primary sectors, in manufacturing, and in household consumption and these are reflected in an increasing emphasis on the use of fossil fuels and construction materials. Mexico’s economy has been strongly influenced by international trade since the country commenced competing in international markets. In the 1970s, Mexico mainly exported primary resources. This pattern has changed and manufactured goods now have a much greater importance due to a boom in assembling industries. In contrast with other Latin American countries, Mexico has achieved a diversification of production, moving towards technology-intensive products and a better mix in its export portfolio. However, crude oil exports still represent the single most important export good. Mexico’s material consumption is still well below the OECD average but is growing fast and the current resource use patterns may well present serious social and environmental problems to the medium and long term sustainability of Mexico’s economy and community. Information on natural resource use and resource productivity could provide valuable guidance for economic policy planning in Mexico.

Aplicatiu de gestió de material multimèdia produït amb Dalet Plus

A principis de 2002, a la facultat de Ciències de la Comunicació de la Universitat Autònoma de Barcelona es va implantar un sistema de digitalització d'àudio, per tal de modernitzar els laboratoris de ràdio i adaptar-los a la realitat actual dels massmedia. Aquest sistema, anomenat Dalet Plus, permet produir, editar i gestionar material multimèdia relacionat amb les assignatures de ràdio impartides a la facultat. Fins ara, no existia cap aplicació que gestionés el material de cursos anteriors produït amb el sistema Dalet. L'objectiu d'aquest projecte, és desenvolupar una aplicació en entorn web, accessible a tothom, per a que alumnes, professors i tècnics puguin consultar, reproduir i recuperar, el material produït amb el sistema Dalet Plus de cursos anteriors.

Pulmonary involvement in Schistosomiasis mansoni

The post-treatment pulmonary alterations were evaluated in patients (Study 1) and in mice (Study 2) infected with Schistosoma mansoni. Study 1: the patients were examined pre and post-treatment (with ora oxamniquine) and the following exams were performed: sputum for eosinophils and chest x-ray. Study 2: four groups of mice (total = 64) were studied; Group I (infected and treated with oxamniquine); II (infected and not treated); III (not infected and treated) and IV (not infected and not treated). All were x-rayed to check for pulmonary abnormalities pre and post-treatment and lung specimens were studied by optical microscopy and immunofluorescence. We have found abnormalities in the parameters checked in both studies and the results suggest an immunological reaction, probably due to deposition of immune complexes in the lungs, with subsequent activation of the complement system. The experimental study showed that the alterations are not dependent of the presence of eggs and/or worms of S. mansoni in the lungs, thus corroborating the hypothesis of deposition of circulating material.

Correlation of wear in vivo and six laboratory wear methods.

OBJECTIVE: We examined the correlation between clinical wear rates of restorative materials and enamel (TRAC Research Foundation, Provo, USA) and the results of six laboratory test methods (ACTA, Alabama (generalized, localized), Ivoclar (vertical, volumetric), Munich, OHSU (abrasion, attrition), Zurich). METHODS: Individual clinical wear data were available from clinical trials that were conducted by TRAC Research Foundation (formerly CRA) together with general practitioners. For each of the n=28 materials (21 composite resins for intra-coronal restorations [20 direct and 1 indirect], 5 resin materials for crowns, 1 amalgam, enamel) a minimum of 30 restorations had been placed in posterior teeth, mainly molars. The recall intervals were up to 5 years with the majority of materials (n=27) being monitored, however, only for up to 2 years. For the laboratory data, the databases MEDLINE and IADR abstracts were searched for wear data on materials which were also clinically tested by TRAC Research Foundation. Only those data for which the same test parameters (e.g. number of cycles, loading force, type of antagonist) had been published were included in the study. A different quantity of data was available for each laboratory method: Ivoclar (n=22), Zurich (n=20), Alabama (n=17), OHSU and ACTA (n=12), Munich (n=7). The clinical results were summed up in an index and a linear mixed model was fitted to the log wear measurements including the following factors: material, time (0.5, 1, 2 and 3 years), tooth (premolar/molar) and gender (male/female) as fixed effects, and patient as random effect. Relative ranks were created for each material and method; the same was performed with the clinical results. RESULTS: The mean age of the subjects was 40 (±12) years. The materials had been mostly applied in molars (81%) and 95% of the intracoronal restorations were Class II restorations. The mean number of individual wear data per material was 25 (range 14-42). The mean coefficient of variation of clinical wear data was 53%. The only significant correlation was reached by OHSU (abrasion) with a Spearman r of 0.86 (p=0.001). Zurich, ACTA, Alabama generalized wear and Ivoclar (volume) had correlation coefficients between 0.3 and 0.4. For Zurich, Alabama generalized wear and Munich, the correlation coefficient improved if only composites for direct use were taken into consideration. The combination of different laboratory methods did not significantly improve the correlation. SIGNIFICANCE: The clinical wear of composite resins is mainly dependent on differences between patients and less on the differences between materials. Laboratory methods to test conventional resins for wear are therefore less important, especially since most of them do not reflect the clinical wear.

Modificación de la estrategia educativa y diseño de material didáctico para fortalecer el Programa de Educación Ambiental Campamentos Educativos en Faro de Bucerías, Michoacán, México

El fomento de laeducación ambiental en comunidades indígenas de la costa oeste de México en el marco del desarrollo sustentable ha sido el elemento motivador de este proyecto. El objetivo fundamental es el diseño y la aplicación de un material didáctico y de una propuesta de estrategia educativa orientados al conocimiento, gestión y conservación del entorno natural y social de la localidad de Faro de Bucerías, Michoacán, México. En primer lugar se ha realizado una investigación y estudio teórico-práctico para contextualizar el área de estudio. Se ha analizado la propuesta educativa preexistente y se han realizado estudios de carácter socio-ambiental con el fin de seleccionar las líneas temáticas que serán la base de la nueva propuesta, vinculada con el material de trabajo. Posteriormente, se elabora el cuaderno de trabajo en conjunción con la estrategia educativa y se aplican a la sesión de Campamentos Educativos, para evaluar su eficiencia. Se hace un análisis cualitativo y cuantitativo de los resultados obtenidos para poder modificar el material didáctico en los puntos débiles detectados, y se propone la versión definitiva del material.

Determination of displacement, stress- and strain-distribution in the human heart: a FE-model on the basis of MR imaging.

The determination of characteristic cardiac parameters, such as displacement, stress and strain distribution are essential for an understanding of the mechanics of the heart. The calculation of these parameters has been limited until recently by the use of idealised mathematical representations of biventricular geometries and by applying simple material laws. On the basis of 20 short axis heart slices and in consideration of linear and nonlinear material behaviour we have developed a FE model with about 100,000 degrees of freedom. Marching Cubes and Phong's incremental shading technique were used to visualise the three dimensional geometry. In a quasistatic FE analysis continuous distribution of regional stress and strain corresponding to the endsystolic state were calculated. Substantial regional variation of the Von Mises stress and the total strain energy were observed at all levels of the heart model. The results of both the linear elastic model and the model with a nonlinear material description (Mooney-Rivlin) were compared. While the stress distribution and peak stress values were found to be comparable, the displacement vectors obtained with the nonlinear model were generally higher in comparison with the linear elastic case indicating the need to include nonlinear effects.

Caracterització d'oscil·ladors basats en CMOS-M/NEMS i la seva aplicació com a sensors de massa

El present projecte tracta sobre la caracterització d'oscil·ladors basats en ressonadors micro/nanoelectromecànics (M/NEMS) i la seva aplicació com a sensors de massa. Els oscil·ladors utilitzats es basen en un pont i una palanca ressoants M/NEMS, integrats en tecnologia CMOS. En primer lloc s'ha fet una introducció teòrica als conceptes utilitzats per a entendre el funcionament i la caracterització dels dispositius. A continuació s'han realitzat proves per tal de caracteritzar els paràmetres importants per a l'ús dels oscil·ladors com a sensors de massa, com la seva estabilitat en freqüència. Per acabar s'han aplicat aquests sensors en la caracterització i modelització del flux de massa a través d'obertures de dimensions micromètriques.

Estudio de sincronización cooperativa en redes de sensores

En este informe se estudia cómo es posible utilizar redes de sensores inalámbricos (WSN), para la localización de determinados eventos. Se hace un estudio previo de cómo una red de sensores puede llegar a estar sincronizada de una manera cooperativa, interactuando todos los sensores de la red entre sí. Primero se realiza el estudio para la sincronización de dos sensores con frecuencias diferentes, viéndose los parámetros que intervienen para que esta sincronización se realice con éxito, y también los efectos que en ella se produce al añadirle ruido. Seguidamente, se realiza el estudio para la sincronización de redes de N sensores, de manera que interactúen entre ellos de forma cooperativa. Se observan las características de la sincronización cuando todos los sensores llegan a consenso y, después, se busca la forma para que el consenso tienda hacia un valor determinado por mutuo acuerdo de los sensores. Finalmente, a partir de las características obtenidas en el consenso de N sensores, se realiza una aplicación práctica para la localización de eventos por medio del consenso de estas redes de sensores inalámbricos.

Study of the influence of grain size and precipitates on the electromagnetic losses in different grades of non-oriented fully processed electrical steel

The study was performed in the installations of OCAS, a Steel Research Centre of ArcelorMittal. Taking M32 steel (3.25%Si+0.9%Al) as the basis chemical composition and three different thicknesses (0.35, 0.5 and 0.65mm), different annealing conditions (temperature and time) have been applied in the laboratory simulator at St. Chély, France. The aim was to link annealing parameters, grain size and energy loss. It was determined the optimum annealing parameters to reach the lowest power losses for three different grades of non-oriented fully processed electrical steel. In addition, M250-50 samples having different magnetic behaviour (high and low losses) but the same grain size and texture, have been analyzed in terms of TEM observations of their precipitates, in the University of Marseille. The results reveal that a high amount of medium and big precipitates (&10 nm) worsen the magnetic properties of the material. The small precipitates (&10nm) do not have a strong influence on the magnetic properties. The presence of precipitates can have a great influence on the power losses and further work is clearly necessary.