LiNbO3：Ru：Fe晶体畴反转过程中的电色效应

观察到了双掺杂LiNbO3：Ru：Fe晶体中电色效应伴随畴反转而发生，且与畴反转一样也具有可逆性，两者相辅相成，畴反转导致了晶体变色，电色效应促进了畴反转，系统的实验结果证明了两者的相辅相成性．基于铌酸锂铁电微结构模型，简要解释了其机理．而且发现在极化过程中电色效应促使了畴核的形成，使之不同于非掺杂同成分比铌酸锂晶体的矫顽场大于击穿电场，用恒定直流电场代替脉冲电场也能实现畴反转，这将为周期性极化铌酸锂的制备提供一种新的技术改进．

Effect of absorption on the diffraction efficiency in Fe : LiNbO3 crystal with 90 degrees recording geometry

In this paper the saturated diffraction efficiency has been optimized by considering the effect of the absorption of the recording light on a crossed-beam grating with 90 degrees recording geometry in Fe:LiNbO3 crystals. The dependence of saturated diffraction efficiency on the doping levels with a known oxidation-reduction state, as well as the dependence of saturated diffraction efficiency on oxidation-reduction state with known doping levels, has been investigated. Two competing effects on the saturated diffraction efficiency were discussed, and the intensity profile of the diffracted beam at the output boundary has also been investigated. The results show that the maximal saturated diffraction efficiency can be obtained in crystals with moderate doping levels and modest oxidation state. An experimental verification is performed and the results are consistent with those of the theoretical calculation.

Electrochromic effect in domain-inversion process LiNbO3 : Ru : Fe crystals

A reversible electrochromic effect accompanying domain-inversion during the electrical poling process in LiNbO3: Ru: Fe crystals at room temperature has been observed. In electrode area, both electrochromism and domain-inversion occur alternately, and electrochromism is also reversible during back-switch poling, which is experimentally verified and whose mechanism is briefly explained using a microstructure ferroelectric model. In addition, because of the enhancing elcctrochromic effect, different from the undoped LiNbO3 crystals, the coercive riled (21.0 kV/mm or so) measured in LiNbO3: Ru: Fe is lower than its breakdown field, thus providing a possible new technique for realizing the domain-inversion by constant electric field rather than a pulsed one.

Reversible electrochromic effect accompanying domain-inversion in LiNbO3 : Ru : Fe crystals

A reversible electrochromic effect during the electrical poling process in LiNbO3:Ru:Fe crystals at room temperature is observed. In electrode area, both electrochromism and domain-inversion occur mutually and electrochromism is reversible during back-switch poling, which are experimentally verified, and a microstructure model to explain the mechanism is proposed. In addition, different from the undoped LiNbO3 crystals, the breakdown field (> 25.0 kV/mm) is higher than the coercive (21.0 kV/mm) measured in LiNbO3:Ru:Fe, which proves a possible new technique to realize domain-inversion by constant electric field rather than pulsed one. (c) 2005 American Institute of Physics.

Heterogeneous catalytic activity on Mn, Fe and Co-based metalloporphyrinic Solid Coordination Frameworks (SCFs)

Comunicación al congreso 1st European Conference on Metal Organic Frameworks and Porous Polymers, celebrado en Postdam del 11 al 14 de octubre de 2015

稀磁半导体(Ga,Mn)As和铁磁金属-半导体异质结Fe/GaAs铁磁相变过程的研究

Submitted by zhangdi (zhangdi@red.semi.ac.cn) on 2009-04-13T11:45:31Z

Synthesis Gas Generation by Chemical-Looping Reforming Using Ce-Based Oxygen Carriers Modified with Fe, Cu, and Mn Oxides

Chemical-looping reforming (CLR) is a technology that can be used for partial oxidation and steam reforming of hydrocarbon fuels. It involves the use of a metal oxide as an oxygen carrier, which transfers oxygen from combustion air to the fuel. Composite oxygen carriers of cerium oxide added with Fe, Cu, and Mn oxides were prepared by co-precipitation and investigated in a thermogravimetric analyzer and a fixed-bed reactor using methane as fuel and air as oxidizing gas. It was revealed that the addition of transition-metal oxides into cerium oxide can improve the reactivity of the Ce-based oxygen carrier. The three kinds of mixed oxides showed high CO and H-2 selectivity at above 800 degrees C. As for the Ce-Fe-O oxygen carrier, methane was converted to synthesis gas at a H-2/CO molar ratio close to 2:1 at a temperature of 800-900 degrees C; however, the methane thermolysis reaction was found on Ce-Cu-O and Ce-Mn-O oxygen carriers at 850-900 degrees C. Among the three kinds of oxygen carriers, Ce-Fe-O presented the best performance for methane CLR. On Ce-Fe-O oxygen carriers, the CO and H-2 selectivity decreased as the Fe content increased in the carrier particles. An optimal range of the Ce/Fe molar ratio is Ce/Fe > 1 for Ce-Fe-O oxygen carriers. Scanning electron microscopy (SEM) analysis revealed that the microstructure of the Ce-Fe-O oxides was not dramatically changed before and after 20 cyclic reactions. A small amount of Fe3C was found in the reacted Ce-Fe-O oxides by X-ray diffraction (XRD) analysis.

钙钛石型复合氧化物La_xSr_(1-x)M_yM'_(1-y)O_3(M, M' = Mn, Fe, Co)的固体物理化学性质和催化性能的研究

钙钛石型复合氧化物由于具有许多独特的物理化学性质，如多种类型的磁性和导电性、对多种物理和化学因素的敏感性、高温下的稳定性和结构的明确易调性等长期以来一直受到固体物理、固体化学和催化科技工作者重视，本文第一部分详细总结了文献中有关这类氧化物的结构、电子状态、电磁性质、表面吸附性能、稳定性以及反应机理和催化性能等方面的重要结果。第二部分为催化剂的制备和表征方法。第三部分针对文献中研究较少的B位取代钙钛石型氧化物，系统研究了系列化合物LaM_yM'_(1-y)O_a (M, M' = Mn, Fe, Co)的固体物理化学性质和对NH3和CO氧化反应的催化性能，讨论了它们之间的关系。1. 催化剂的制备、晶体结构与光谱性质。2. LaM_yM'_(1-y)O_3(M、M' = Mn、Fe、Co)r的氧化还原性质和稳定性。3. 过渡金属离子的状态及其之间的相互作用。4. 催化剂中氧的形态。5. 氨氧化性能与固体物化性质之间的关系。6. 一氧化碳氧化与固体物化性质之间的关系。