High performance liquid level monitoring system based on polymer fiber Bragg gratings embedded in silicone rubber diaphragm

Liquid-level sensing technologies have attracted great prominence, because such measurements are essential to industrial applications, such as fuel storage, flood warning and in the biochemical industry. Traditional liquid level sensors are based on electromechanical techniques; however they suffer from intrinsic safety concerns in explosive environments. In recent years, given that optical fiber sensors have lots of well-established advantages such as high accuracy, costeffectiveness, compact size, and ease of multiplexing, several optical fiber liquid level sensors have been investigated which are based on different operating principles such as side-polishing the cladding and a portion of core, using a spiral side-emitting optical fiber or using silica fiber gratings. The present work proposes a novel and highly sensitive liquid level sensor making use of polymer optical fiber Bragg gratings (POFBGs). The key elements of the system are a set of POFBGs embedded in silicone rubber diaphragms. This is a new development building on the idea of determining liquid level by measuring the pressure at the bottom of a liquid container, however it has a number of critical advantages. The system features several FBG-based pressure sensors as described above placed at different depths. Any sensor above the surface of the liquid will read the same ambient pressure. Sensors below the surface of the liquid will read pressures that increase linearly with depth. The position of the liquid surface can therefore be approximately identified as lying between the first sensor to read an above-ambient pressure and the next higher sensor. This level of precision would not in general be sufficient for most liquid level monitoring applications; however a much more precise determination of liquid level can be made by linear regression to the pressure readings from the sub-surface sensors. There are numerous advantages to this multi-sensor approach. First, the use of linear regression using multiple sensors is inherently more accurate than using a single pressure reading to estimate depth. Second, common mode temperature induced wavelength shifts in the individual sensors are automatically compensated. Thirdly, temperature induced changes in the sensor pressure sensitivity are also compensated. Fourthly, the approach provides the possibility to detect and compensate for malfunctioning sensors. Finally, the system is immune to changes in the density of the monitored fluid and even to changes in the effective force of gravity, as might be obtained in an aerospace application. The performance of an individual sensor was characterized and displays a sensitivity (54 pm/cm), enhanced by more than a factor of 2 when compared to a sensor head configuration based on a silica FBG published in the literature, resulting from the much lower elastic modulus of POF. Furthermore, the temperature/humidity behavior and measurement resolution were also studied in detail. The proposed configuration also displays a highly linear response, high resolution and good repeatability. The results suggest the new configuration can be a useful tool in many different applications, such as aircraft fuel monitoring, and biochemical and environmental sensing, where accuracy and stability are fundamental. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

AstroWeb – A Graphical Representation of an Astronomical WFPDB Database Using a Web-Based Open Source Geographical Information System

ACM Computing Classification System (1998): H.5.2, H.2.8, J.2, H.5.3.

Large volume metrology technologies for the light controlled factory

In the Light Controlled Factory part-to-part assembly and reduced weight will be enabled through the use of predictive fitting processes; low cost high accuracy reconfigurable tooling will be made possible by active compensation; improved control will allow accurate robotic machining; and quality will be improved through the use of traceable uncertainty based quality control throughout the production system. A number of challenges must be overcome before this vision will be realized; 1) controlling industrial robots for accurate machining; 2) compensation of measurements for thermal expansion; 3) Compensation of measurements for refractive index changes; 4) development of Embedded Metrology Tooling for in-tooling measurement and active tooling compensation; and 5) development of Software for the Planning and Control of Integrated Metrology Networks based on Quality Control with Uncertainty Evaluation and control systems for predictive processes. This paper describes how these challenges are being addressed, in particular the central challenge of developing large volume measurement process models within an integrated dimensional variation management (IDVM) system.

The Knowledge in Automotive Field Representation with Modern Technologies

Modern technologies have changed the way of presenting information in archives. This makes it possible to introduce new services, which was unimaginable a few years ago. Digitalization, security and virtual presentation of objects in the sphere of motoring by application of technologies, based on knowledge about how to create digital resources is the theme of this project. The aim of AutoKnow project is to carry out a research and create a multi- media digital archive AutoKnow and Experimental Virtual Motor Laboratory (EVML) with Motor Library (ML) from digital multi-media patterns from a selected group of objects in the sphere of automobile technology, presented by NMU. This makes it possible to widely apply multi-media collections in automobile engineering, teaching, research work in that sphere and serve the interests of a large number of auto-amateurs as well in Bulgaria. The research and development of АutoKnow is in the following mutually related fields: - Creation and annotation of collections of objects in the sphere of automobiles; - Creation, analysis and security of a digital archive AutoKnow; - Design and creation of Digital Motor Library; - Socially-oriented applications in education, scientific studies and Experimental Virtual Motor Laboratory; - Informational System for teaching and testing of knowledge in the sphere of automobiles MindCheck.

Implementation of a machine tool performance measurement and diagnostic system and its impact on parts verification

Five axis machine tools are increasing and becoming more popular as customers demand more complex machined parts. In high value manufacturing, the importance of machine tools in producing high accuracy products is essential. High accuracy manufacturing requires producing parts in a repeatable manner and precision in compliance to the defined design specifications. The performance of the machine tools is often affected by geometrical errors due to a variety of causes including incorrect tool offsets, errors in the centres of rotation and thermal growth. As a consequence, it can be difficult to produce highly accurate parts consistently. It is, therefore, essential to ensure that machine tools are verified in terms of their geometric and positioning accuracy. When machine tools are verified in terms of their accuracy, the resulting numerical values of positional accuracy and process capability can be used to define design for verification rules and algorithms so that machined parts can be easily produced without scrap and little or no after process measurement. In this paper the benefits of machine tool verification are listed and a case study is used to demonstrate the implementation of robust machine tool performance measurement and diagnostics using a ballbar system.

The Use of the Digital Off-Air Radio Events Archive System EventsBNR in the Bulgarian National Radio

The paper describes the use of the system created for Digital off-air radio events archive EventsBNR in the Bulgarian National Radio. The system provides efficient application of modern information technologies in radio archiving.

Linking design and manufacturing domains via web-based and enterprise integration technologies

The manufacturing industry faces many challenges such as reducing time-to-market and cutting costs. In order to meet these increasing demands, effective methods are need to support the early product development stages by bridging the gap of communicating early design ideas and the evaluation of manufacturing performance. This paper introduces methods of linking design and manufacturing domains using disparate technologies. The combined technologies include knowledge management supporting for product lifecycle management systems, Enterprise Resource Planning (ERP) systems, aggregate process planning systems, workflow management and data exchange formats. A case study has been used to demonstrate the use of these technologies, illustrated by adding manufacturing knowledge to generate alternative early process plan which are in turn used by an ERP system to obtain and optimise a rough-cut capacity plan. Copyright © 2010 Inderscience Enterprises Ltd.

A comparison of two distributed large-volume measurement systems:the mobile spatial co-ordinate measuring system and the indoor global positioning system

Advances in the area of industrial metrology have generated new technologies that are capable of measuring components with complex geometry and large dimensions. However, no standard or best-practice guides are available for the majority of such systems. Therefore, these new systems require appropriate testing and verification in order for the users to understand their full potential prior to their deployment in a real manufacturing environment. This is a crucial stage, especially when more than one system can be used for a specific measurement task. In this paper, two relatively new large-volume measurement systems, the mobile spatial co-ordinate measuring system (MScMS) and the indoor global positioning system (iGPS), are reviewed. These two systems utilize different technologies: the MScMS is based on ultrasound and radiofrequency signal transmission and the iGPS uses laser technology. Both systems have components with small dimensions that are distributed around the measuring area to form a network of sensors allowing rapid dimensional measurements to be performed in relation to large-size objects, with typical dimensions of several decametres. The portability, reconfigurability, and ease of installation make these systems attractive for many industries that manufacture large-scale products. In this paper, the major technical aspects of the two systems are briefly described and compared. Initial results of the tests performed to establish the repeatability and reproducibility of these systems are also presented. © IMechE 2009.

Improving the Quality of Education by Using a System for Development and Generation of Personalized Educational Materials

Report published in the Proceedings of the National Conference on "Education and Research in the Information Society", Plovdiv, May, 2016

ASIC microcontroller design of a radiation monitoring system using VHDL modeling and FPGA implementation

Three new technologies have been brought together to develop a miniaturized radiation monitoring system. The research involved (1) Investigation a new HgI$\sb2$ detector. (2) VHDL modeling. (3) FPGA implementation. (4) In-circuit Verification. The packages used included an EG&G's crystal(HgI$\sb2$) manufactured at zero gravity, the Viewlogic's VHDL and Synthesis, Xilinx's technology library, its FPGA implementation tool, and a high density device (XC4003A). The results show: (1) Reduced cycle-time between Design and Hardware implementation; (2) Unlimited Re-design and implementation using the static RAM technology; (3) Customer based design, verification, and system construction; (4) Well suited for intelligent systems. These advantages excelled conventional chip design technologies and methods in easiness, short cycle time, and price in medium sized VLSI applications. It is also expected that the density of these devices will improve radically in the near future. ^

A nanoliter volume nuclear magnetic resonance (NMR) system using tunneling magneto-resistive (TMR) sensors to recognize biomolecules

The need to incorporate advanced engineering tools in biology, biochemistry and medicine is in great demand. Many of the existing instruments and tools are usually expensive and require special facilities.^ With the advent of nanotechnology in the past decade, new approaches to develop devices and tools have been generated by academia and industry. ^ One such technology, NMR spectroscopy, has been used by biochemists for more than 2 decades to study the molecular structure of chemical compounds. However, NMR spectrometers are very expensive and require special laboratory rooms for their proper operation. High magnetic fields with strengths in the order of several Tesla make these instruments unaffordable to most research groups.^ This doctoral research proposes a new technology to develop NMR spectrometers that can operate at field strengths of less than 0.5 Tesla using an inexpensive permanent magnet and spin dependent nanoscale magnetic devices. This portable NMR system is intended to analyze samples as small as a few nanoliters.^ The main problem to resolve when downscaling the variables is to obtain an NMR signal with high Signal-To-Noise-Ratio (SNR). A special Tunneling Magneto-Resistive (TMR) sensor design was developed to achieve this goal. The minimum specifications for each component of the proposed NMR system were established. A complete NMR system was designed based on these minimum requirements. The goat was always to find cost effective realistic components. The novel design of the NMR system uses technologies such as Direct Digital Synthesis (DDS), Digital Signal Processing (DSP) and a special Backpropagation Neural Network that finds the best match of the NMR spectrum. The system was designed, calculated and simulated with excellent results.^ In addition, a general method to design TMR Sensors was developed. The technique was automated and a computer program was written to help the designer perform this task interactively.^

Trade, justice, and the politics of difference: Small developing states in the World Trade Organization

The purpose of this research project was to investigate two distinct types of research questions – one theoretical, the other empirical: (1) What would justice mean in the context of the international trade regime? (2.Using the small developing states of the Commonwealth Caribbean as a case study, what do Commonwealth Caribbean trade negotiators mean when they appeal to justice? Regarding the first question, Iris Young's framework which focuses on the achievement of social justice in a domestic context by acknowledging social differences such as those based on race and gender, was adopted and its relevance argued in the international context of interstate trade negotiation so as to validate the notion of (size, location, and governance capacity) difference in this latter context. The point of departure is that while states are typically treated as equals in international law – as are individuals in liberal political theory – there are significant differences between states which warrant different treatment in the international arena. The study found that this re-formulation of justice which takes account of such differences between states, allows for more adequate policy responses than those offered by the presumption of equal treatment. Regarding the second question, this theoretical perspective was used to analyze the understandings of justice from which Commonwealth Caribbean trade negotiators proceed. Interpretive and ethnographic methods, including participant observation, interviews, field notes, and textual analysis, were employed to analyze their understandings of justice. The study found that these negotiators perceive such justice as being justice to difference because of the distinct characteristics of small developing states which combine to constrain their participation in the international trading system; based on this perception, they seek rules and outcomes in the multilateral trade regime which are sensitive to such different characteristics; and while these issues were examined in a specific region, its findings are relevant for other regions consisting of small developing states, such as those in the ACP group.

The impact of a Classroom Performance System on learning gains in a biology course for science majors

This study was conducted to determine if the use of the technology known as Classroom Performance System (CPS), specifically referred to as "Clickers", improves the learning gains of students enrolled in a biology course for science majors. CPS is one of a group of developing technologies adapted for providing feedback in the classroom using a learner-centered approach. It supports and facilitates discussion among students and between them and teachers, and provides for participation by passive students. Advocates, influenced by constructivist theories, claim increased academic achievement. In science teaching, the results have been mixed, but there is some evidence of improvements in conceptual understanding. The study employed a pretest-posttest, non-equivalent groups experimental design. The sample consisted of 226 participants in six sections of a college biology course at a large community college in South Florida with two instructors trained in the use of clickers. Each instructor randomly selected their sections into CPS (treatment) and non-CPS (control) groups. All participants filled out a survey that included demographic data at the beginning of the semester. The treatment group used clicker questions throughout, with discussions as necessary, whereas the control groups answered the same questions as quizzes, similarly engaging in discussion where necessary. The learning gains were assessed on a pre/post-test basis. The average learning gains, defined as the actual gain divided by the possible gain, were slightly better in the treatment group than in the control group, but the difference was statistically non-significant. An Analysis of Covariance (ANCOVA) statistic with pretest scores as the covariate was conducted to test for significant differences between the treatment and control groups on the posttest. A second ANCOVA was used to determine the significance of differences between the treatment and control groups on the posttest scores, after controlling for sex, GPA, academic status, experience with clickers, and instructional style. The results indicated a small increase in learning gains but these were not statistically significant. The data did not support an increase in learning based on the use of the CPS technology. This study adds to the body of research that questions whether CPS technology merits classroom adaptation.

Global Capitalism, Immigrant Labor, and the Struggle for Justice

Around the world borders are militarized, states are stepping up repressive anti-immigrant controls, and native publics are turning immigrants into scapegoats for the spiraling crisis of global capitalism. The massive displacement and primitive accumulation unleashed by free trade agreements and neo-liberal policies, as well as state and “private” violence has resulted in a virtually inexhaustible immigrant labor reserve for the global economy. State controls over immigration and immigrant labor have several functions for the system: 1) state repression and criminalization of undocumented immigration make immigrants vulnerable and deportable and therefore subject to conditions of super-exploitation, super-control and hyper-surveillance; 2) anti-immigrant repressive apparatuses are themselves ever more important sources of accumulation, ranging from private for-profit immigrant detention centers, to the militarization of borders, and the purchase by states of military hardware and systems of surveillance. Immigrant labor is extremely profitable for the transnational corporate economy; 3) the anti-immigrant policies associated with repressive state apparatuses help turn attention away from the crisis of global capitalism among more privileged sectors of the working class and convert immigrant workers into scapegoats for the crisis, thus deflecting attention from the root causes of the crisis and undermining working class unity. This article focuses on structural and historical underpinnings of the phenomenon of immigrant labor in the new global capitalist system and on how the rise of a globally integrated production and financial system, a transnational capitalist class, and transnational state apparatuses, have led to a reorganization of the world market in labor, including deeper reliance on a rapidly expanding reserve army of immigrant labor and a vicious new anti-immigrant politics. It looks at the United States as an illustration of the larger worldwide situation with regard to immigration and immigrant justice. Finally, it explores the rise of an immigrant justice movement around the world, observes the leading role that immigrant workers often play in worker’s struggles and that a mass immigrant rights movement is at the cutting edge of the struggle against transnational corporate exploitation. We call for replacing the whole concept of national citizenship with that of global citizenship as the only rallying cry that can assure justice and equality for all.

The Prison System and the Media: How “Orange Is The New Black” Engages with the Prison as a Normalizing Agent

The purpose of this project is to ascertain the ways in which Orange is the New Black uses its platform to either complicate or reify narratives about the prison system, prisoners and their relationship to the state. This research uses the works of Giorgio Agamben, Colin Dayan, Michelle Alexander and Lisa Guenther to situate the ways the state uses the prison and social narratives about the prison to extend its control on certain populations beyond prison walls through police presence, parole, the war on drugs and prison fees. From that basis, this work argues that while Orange does challenge some narratives about race and sexuality, because of its reliance on “bad choices” as a humanizing trope and its reliance on certain racialized stereotypes for entertainment, the show ultimately does more to reify existing narratives that support state interests.