938 resultados para Jet fluid
Resumo:
Invariant mass spectra for jets reconstructed using the anti-k T and CambridgeAachen algorithms are studied for different jet grooming techniques in data corresponding to an integrated luminosity of 5 fb-1, recorded with the CMS detector in proton-proton collisions at the LHC at a center-of-mass energy of 7 TeV. Leading-order QCD predictions for inclusive dijet and W/Z+jet production combined with parton-shower Monte Carlo models are found to agree overall with the data, and the agreement improves with the implementation of jet grooming methods used to distinguish merged jets of large transverse momentum from softer QCD gluon radiation. © 2013 CERN for the benefit of the CMS collaboration.
Resumo:
Fetal fluids have different vital functions that sustain both pregnancy and normal parturition. The biochemical composition of amniotic fluid during gestation is not well established; thus the purpose of the present study was to determine the biochemical profile of both amniotic and allantoic fluids from mares during initial, mid, and latter third phases of pregnancy. Samples were collected after slaughter, using allantocentesis and amniocentesis. Sixty samples of fetal fluids were analyzed. Alkaline phosphatase (AP), glucose, total protein (TP), urea, creatinine, Ca, chloride (Cl), Na, and K concentrations were measured using commercially available kits. The AP concentration in amniotic fluid was higher than that in allantoic fluid during the three gestational phases (P < .05). There were no differences between glucose mean values of allantoic and those of amniotic fluids (P < .05). However, glucose values were higher in the allantoic fluid in the last trimester of pregnancy. TP was higher in the amniotic fluid than in allantoic fluid (P < .05). Urea values varied among the phases; however, there were no differences between the amniotic and allantoic fluid values (P > .05). Creatinine values were higher in allantoic fluid (P < .05). Na and Cl concentrations were higher in amniotic fluid (P < .05). However, Ca and K concentrations were higher in the allantoic fluid. © 2013 Elsevier Inc. All rights reserved.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Engenharia Mecânica - FEB
Resumo:
Pós-graduação em Ciência e Tecnologia de Materiais - FC
Resumo:
O depósito aurífero de Piaba tornou-se a primeira mina em operação no fragmento cratônico São Luís, noroeste do Maranhão. Seu ambiente geológico compreende rochas metavulcanossedimentares do Grupo Aurizona e granitoides da Suíte Tromaí, entre outras unidades menores, formadas em ambiente de arcos de ilhas entre 2240 e 2150 Ma, juntamente com outras unidades menores. A mineralização é caracterizada por uma trama stockwork de veios e vênulas de quartzo com seus halos de alteração (clorita + muscovita + carbonato + pirita + calcopirita e ouro) hospedada em um granodiorito granofírico fino (Granófiro Piaba) e em rocha subvulcânica andesítica do Grupo Aurizona. O corpo mineralizado é espacialmente limitado à zona de cisalhamento ENE-WSW rúptil-dúctil (Falha Piaba). Estudos petrográficos, microtermométricos e por espectroscopia microRaman no quartzo definiram inclusões aquo-carbônicas bifásicas e trifásicas, produzidas por aprisionamento heterogêneo durante separação de fases, e fluidos aquosos tardios. A solução mineralizadora corresponde a um fluido aquo-carbônico composto por CO2 (5 - 24 mol%, densidade de 0,96 - 0,99 g/cm3), H2O (74 - 93 mol%), N2 (< 1 mol%), CH4 (<1mol%) e 5,5 % em peso NaCl equivalente. O minério depositou a 267 - 302ºC e 1,25 - 2,08 kbar, correspondendo a profundidades de 4 a 7 km, em consonância com o regime estrutural. A composição e o intervalo de P-T do fluido mineralizador, combinados com o caráter redutor (log ƒO2 -31,3 a -34,3) e a sulfetação da rocha hospedeira, sugerem que o ouro foi transportado como um complexo sulfetado. O minério foi depositado em consequência da separação de fase, redução da atividade de enxofre e da ƒO2 pela interação fluido-rocha.
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Central α2-adrenoceptors and the pontine lateral parabrachial nucleus (LPBN) are involved in the control of sodium and water intake. Bilateral injections of moxonidine (α2-adrenergic/imidazoline receptor agonist) or noradrenaline into the LPBN strongly increases 0.3 M NaCl intake induced by a combined treatment of furosemide plus captopril. Injection of moxonidine into the LPBN also increases hypertonic NaCl and water intake and reduces oxytocin secretion, urinary sodium, and water excreted by cell-dehydrated rats, causing a positive sodium and water balance, which suggests that moxonidine injected into the LPBN deactivates mechanisms that restrain body fluid volume expansion. Pretreatment with specific α2-adrenoceptor antagonists injected into the LPBN abolishes the behavioral and renal effects of moxonidine or noradrenaline injected into the same area, suggesting that these effects depend on activation of LPBN α2-adrenoceptors. In fluid-depleted rats, the palatability of sodium is reduced by ingestion of hypertonic NaCl, limiting intake. However, in rats treated with moxonidine injected into the LPBN, the NaCl palatability remains high, even after ingestion of significant amounts of 0.3 M NaCl. The changes in behavioral and renal responses produced by activation of α2-adrenoceptors in the LPBN are probably a consequence of reduction of oxytocin secretion and blockade of inhibitory signals that affect sodium palatability. In this review, a model is proposed to show how activation of α2-adrenoceptors in the LPBN may affect palatability and, consequently, ingestion of sodium as well as renal sodium excretion.
Resumo:
INTRODUCTION: Regenerative therapies using biomaterials require accurate information on interactions between the implanted material and the human body. To improve the process of bone regeneration it is necessary to obtain a better understanding of the influence of the surfaces on the early stages of osseointegration. This work aims to investigate the dynamic interaction between simulated body fluid (SBF) and titanium surfaces (Ti cp) immediately after their first contact. METHODS: Ti cp samples were passed through physicochemical treatments after immersion in acid solution, alkaline solution and solutions containing TiO2 and Ca2+, to obtain three different surfaces. These were characterized by electron microscopy and free energy estimates. The evaluation of the interaction with SBF was performed by measuring the dynamic contact angles after contacting the surfaces. RESULTS: The effects of SBF wettability were more significant on surfaces according to high energy estimates. A comparative analysis of the three types of surfaces showed that fluid spreading was greater in samples with greater polar components, indicating that the surface nature influences interactions in the early stages of osseointegration. CONCLUSION: The results indicate the influence of polar interactions in the dynamic wettability of the SBF. It is possible that these interactions can also influence cellular viability on surfaces. Based on these results, new experiments are being designed to improve the presented methodology as a tool for the evaluation of biomaterials without the need for in vivo experiments.
Resumo:
Maceration and supercritical fluid extraction were used to prepare extracts from parts of plants (Holostylis reniformis) collected in two different regions of Brazil. ¹H NMR, HPLC-DAD-ESI/MS, HPLC-DAD, GC-MS, and chemometric techniques were used to analyse lignans in the extracts and showed that yields of SFE-CO2 were less than or equal to those of hexane maceration extracts. These analyses, in conjunction with the concentrations of aliphatic hydrocarbons, fatty acids and their methyl and ethyl derivatives in the extracts, also allowed the chemical composition of parts and provenance of the plant to be differentiated.
Resumo:
In order to establish the concentrations of glucose, cholesterol, total protein and growth factor insulin-like type I (IGF-I) in the follicular fluid, 26 Murrah breed river buffaloes, between 45 and 70 days postpartum, empty, multiparous, with average live weight of 675 +/- 56 kg and average body condition of 3.5 points on a scale of 1-5, were used in this study. The fluid was collected from dominant follicles with diameters between 8 and 12 mm by OPU, and was not taken into account the stage of the estrous cycle. Using this technique, the wave of follicular development was synchronized six days prior to collection. Biochemical analysis was performed to glucose and cholesterol through the enzymatic colorimetric method using commercial kit glicose CHOLESTEROL GOD-PAP and CHOD-PAP (Kovalent), respectively. Determination of total protein was carried out by using total protein commercial kit (Kovalent) Biuret method, and the readings were performed using absorption spectrophotometry with visible light. Concentration of IGF-I was measured by Radioimmunoassay (RIA) technique using commercial IRMA Kit IGF-I (INMUNOTECH). Descriptive statistics were developed using the PROC MEANS procedure of SAS (2009). Concentration of glucose (4.0 +/- 0.75 mmol / L-1) and IGF-I (340 +/- 129.83 ng / mL (-1)) were higher than those reported by other authors in river buffaloes and cows, respectively. However, cholesterol levels (0.51 +/- 0.12 mmol / L (-1)) and total protein (58.4 +/- 4.43 g / L (-1)) behaved inferior to other studies in same species. The results indicated that there is relationship among the nutritional aspects, diameter of follicles aspirated and productive period in the concentration of biochemical indicators.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)