Development strategy in Bihar through revitalizing the agricultural sector : a preliminary analysis

Based mainly on secondary data and partly on primary information obtained through field surveys in selected rural areas in Bihar in 2011, this paper firstly argues the critical importance of agricultural growth for overall economic development, and then reviews the sluggish growth of agriculture in Bihar in the past and examines the major reasons for this. The long-term negligence of agricultural research (especially development and diffusion endeavors for improved rice varieties suitable to the local conditions of Bihar) by the state government and some sort of ‘backwardness’ in tube-well irrigation technology can be pointed out as important constraints. There is, in particular, the ‘paradox’ in Bihar agriculture of why rice and wheat yields have remained so low in spite of the relatively well-developed irrigation by tube-wells. Finally, by showing the process of a rapid increase in autumn and winter rice yields during the 1990s in West Bengal, it is suggested that Bihar farmers and policy-makers should learn from the experience of West Bengal in order to get some hints for the development of the rice sector in Bihar.

Trade, economic growth and environment

The literature on trade openness, economic development, and the environment is largely inconclusive about the environmental consequences of trade. This study review previous studies focusing on treating trade and income as endogenous and estimating the overall impact of trade openness on environmental quality using the instrumental variables technique. The results show that whether or not trade has a beneficial effect on the environment varies depending on the pollutant and the country. Trade is found to benefit the environment in OECD countries. It has detrimental effects, however, on sulfur dioxide (SO2) and carbon dioxide (CO2) emissions in non-OECD countries, although it does lower biochemical oxygen demand (BOD) emissions in these countries. The results also find the impact is large in the long term, after the dynamic adjustment process, although it is small in the short term.

Environmental consciousness, economic gain and consumer choice of energy efficient appliances in Thailand, China and India

In developing economies, consumption of electricity in residential and commercial sectors increased with economic development. In order to identify the factors for effective facilitation of standard and labeling programs, this article explores factors that affect consumer choice to energy-efficient products. Main findings are as follows: (1)Consumers in Thailand shows the highest awareness to environmental friendly concepts, followed by India and China.(2) Chosen labeled products include air-conditioners, TVs, refrigerators and washing machines, but not some popular products such as ceiling fans, electric fans or mobile phones. (3) Consumer who has higher energy conservation perception will buy energy efficient products.(4) Consumers in China, India and Thailand are sensitive to energy efficiency of products, primarily because they lead to less expenditure on electricity. (5) Labeling works to make levels of the energy efficiency of products more visible and thus helped consumers to choose the products.

An export strategy and technology networks in the Republic of Korea

In Korea, trade with Japan has had a deficit since the normalization of Japan-Korea diplomatic relations in 1965. Korea’s trade balance with Japan has remained in deficit since then, although Korean companies have become bigger compared to Japanese companies. My hypothesis is that the problem has been caused because Korea introduced technologies from Japan. However, in recent years Korean companies could not introduce technologies through technical cooperation with Japan like in the 1990s. In addition, the Korean government seemed to encourage domestic production for import substitution. Nevertheless, the deficit has continued. I thought it necessary to check my hypothesis in order to discover whether or not it was persuasive.

International labor migration in Vietnam and the impact of receiving countries' policies

Labor export has been part of Vietnam’s socio-economic development strategy since the beginning of the doi moi era. Recent years, Vietnam has sent about 80,000 workers abroad per year. Vietnam has become a major source country of unskilled foreign workers for high-income East Asian countries. However, in these receiving countries, the desertion rate among Vietnamese workers is quite high, compared with that for workers from other countries. This paper examines the impact of Korean and Japanese policies for receiving foreign workers applied to and implemented in Vietnam, as well as the impact of Vietnamese labor sending system, on the problem of runaway workers.

Is prohibiting land reallocation enough to promote development of farmland rental markets in China?

Prohibiting land reallocation improves tenure security, but it remains unclear whether this sufficiently facilitates the development of farmland rental markets in China. To fill this gap, we investigate how farmland rental activities are influenced by full-scale land reallocation (FSLR) and partial land reallocation (PLR), which differ in scale and imposition. Employing the instrumental-variables and the difference-in-differences approaches, we find that PLR substitutes relation-specific contracting in the markets, while FSLR complements arms-length contracting. The different impacts are attributable to the difference in imposition rather than scale. These findings suggest the need for further reforms.

Service liberalization in Lao PDR

Service liberalization is emerging as a high-priority issue in various parts of the world for mega free trade agreements as well as national policy. Lao PDR is no exception. To examine the level of service liberalization in Lao PDR, we first compare the Hoekman Indices of Lao PDR, Cambodia, and Vietnam on the ASEAN Framework Agreement on Services (AFAS 8). Lao PDR has lower commitment in many subsectors. In particular, we list the sectors in which Lao PDR made a lower commitment than Cambodia and Vietnam in Mode 3 (supply of services through commercial establishments abroad). Second, a simulation analysis using the Geographical Simulation Model (IDE-GSM) from the Institute of Developing Economies at the Japan External Trade Organization (IDE-JETRO) reveals how service liberalization benefits the economic development of Lao PDR. The two analyses clearly reveal that it is essential for Lao PDR to promote further service liberalization since such liberalization will contribute to the country's development.

Japanese import survey : descriptive analysis

Food importers, such as wholesalers and food processing firms, play an important role in sourcing food from abroad. They are also responsible for ensuring that imported food meets the food safety standards of the importing country. Often, assurance of conformity is done in collaboration with exporters. Thus, importers can influence how supply chains in developing countries are organized. This paper uses a unique dataset obtained from the Japanese market to examine how importers select suppliers and assure food quality.

Integrated economic-hydrologic analysis of policy responses

Water is a vital resource, but also a critical limiting factor for economic and social development in many parts of the world. The recent rapid growth in human population and water use for social and economic development is increasing the pressure on water resources and the environment, as well as leading to growing conflicts among competing water use sectors (agriculture, urban, tourism, industry) and regions (Gleick et al., 2009; World Bank, 2006). In Spain, as in many other arid and semi-arid regions affected by drought and wide climate variability, irrigated agriculture is responsible for most consumptive water use and plays an important role in sustaining rural livelihoods (Varela-Ortega, 2007). Historically, the evolution of irrigation has been based on publicly-funded irrigation development plans that promoted economic growth and improved the socio-economic conditions of rural farmers in agrarian Spain, but increased environmental damage and led to excessive and inefficient exploitation of water resources (Garrido and Llamas, 2010; Varela-Ortega et al., 2010). Currently, water policies in Spain focus on rehabilitating and improving the efficiency of irrigation systems, and are moving from technocratic towards integrated water management strategies driven by the European Union (EU) Water Framework Directive (WFD).

Perspectives on climate change and human development in the Mediterranean agriculture

The Mediterranean region is one of the world's climate change hotspots. Future climate projections envisage dramatic implications for the agricultural and water sectors that will endanger economic development and lead to natural resources degradation and social instability.

Beyond the Regional Development Paradigm: The Limits of Transport-Based Policies in Spain

This paper reviews the transport and economic development trends for the last 20 years in Spain at a detailed (province or NUTS3) level. As Spain has sustained a significant transport investment effort in this period, with the support of EU funding, this review offers an excellent perspective to put some further light on how the transport-and-regional-development paradigm has shaped decision-making in the transport sector. The paper reviews changes in gross domestic product (GDP), population and motorway endowment for the 47 provinces in mainland Spain. Regional development trends seem to be closely associated to particular local conditions, not clearly associated to transport (motorway) infrastructure endowment. This is consistent with the fact that transport infrastructure has not generally been a critical bottleneck for trade and economic activity during this period. The paper concludes that, in general terms, transport infrastructure investment does not seem to be clearly associated to the otherwise substantial differences in regional development among Spanish mainland provinces during this period.

Diseño de instrumentos para configurar una política industrial en España basada en los postulados de la economía evolutiva

La evidencia empírica aplicada a países de cierto tamaño y desarrollo económico, muestra que existe una relación directa y positiva entre la intensidad de la industria manufacturera, medida como porcentaje de su PIB, y ciertas variables económicas como, el crecimiento, el desempleo y la balanza exterior de bienes y servicios. En el caso de esta última, se verifica empíricamente, que los países con una proporción de actividad manufacturera inferior al 20%, tienen una marcada tendencia a presentar déficits crónicos de balanza de bienes y servicios, lo que conduce a persistentes déficits por cuenta corriente, al ser el primer déficit el principal componente del segundo. Esto trae consigo un continuado incremento del endeudamiento externo que no cesa, y que terminará en algún momento por desequilibrar el conjunto de la economía de los países con esos déficits crónicos. Las anteriores conclusiones, abren una vía de orientación de la política económica, que tiene como objetivo la promoción de la industria manufacturera de cada país. Y esto es un hecho ya en 2014. Países relevantes, como Alemania o Francia en la UE, incluso los EEUU y últimamente el Reino Unido, y por supuesto países del área asiática como Japón, Corea del Sur y China, llevan años promoviendo su industria manufacturera. Resulta significativo, que el debate ideológico sobre la bondad de la aplicación política industrial por parte de los gobiernos, frente a las teorías liberales de mantener a los poderes públicos lejos de ese tipo de actividades, haya dado paso a un modelo generalizado de corte más bien horizontal, donde los países casi sin excepciones apoyan el desarrollo de sus empresas con numerosos instrumentos, que van bastante más lejos de los habituales de I+D. Se valora por tanto, la industria manufacturera como algo vital para el equilibrio económico. Incluso la UE, defensora durante décadas de la no intervención de los diferentes Estados miembros en actividades de promoción industrial más allá del apoyo a las actividades de I+D, realiza un giro copernicano, que termina en 2012 proclamando que la industria manufacturera es vital para el equilibrio económico de la UE, que hay que promoverla, e incluso marca un objetivo, precisamente del 20%, como contribución manufacturera a su PIB. Es decir, se da por asumido que los servicios no son un sustituto indefinido de la industria y que por tanto tienen un límite, lo que se contrapone frontalmente contra la anterior creencia de que el aumento de la participación de los servicios en la economía, no solo era bueno, sino un síntoma de desarrollo. Esta premisa ya ha dejado de ser cierta para esos y otros países. En cambio, en España nada de esto sucede en las dos últimas décadas, sino que la industria manufacturera no recibe especial atención de los poderes públicos y se desliza en una pendiente de disminución de su contribución al PIB, que incluso se acelera con la crisis económica que comienza en 2007, hasta alcanzar cifras del orden del 12% del PIB en 2013. La política económica que se aplica es la de la deflación de costes, con los efectos consecuentes sobre los salarios y sobre la capacidad de la economía de generar riqueza. Se apuesta por un modelo de mano de obra barata, que recuerda al de los años 60. Como indicador relevante de esta situación, lo que exporta la industria manufacturera española, no ha ganado en contenido tecnológico en los últimos quince años. Esta situación se ve empeorada por un hecho significativo adicional, y es que casi el 40% de las ventas de la industria manufacturera española provienen de empresas de propiedad extranjera, con lo que eso supone por una parte de dependencia tecnológica del exterior como en el caso del automóvil, y de incertidumbre sobre su futuro, al estar basadas en el mantenimiento en el futuro de una mano de obra barata, que frenará que los españoles que trabajan en esas empresas, progresen económicamente. La propuesta de esta Tesis, es en cambio apostar por un modelo de crecimiento para España que tenga como uno de sus pilares el desarrollo de una industria manufacturera sólida y con cada vez mayor contenido tecnológico. Para ello, se propone un Plan de política industrial, donde se incluye la creación de actores impulsores de este plan, que deben ser del máximo nivel político. Si los diferentes gobiernos no entienden y asumen esta necesidad de apoyo a la industria a largo plazo e independiente de los cambios políticos, no será posible llevar a cabo este Plan. Para su puesta en marcha, se propone la creación o refuerzo de numerosos instrumentos de apoyo a la industria manufacturera de carácter fundamentalmente horizontal que van mucho más allá de los habituales del I+D, y que en varios casos, tienen una clara semejanza con otros existentes ya en otros países desarrollados desde hace años. La promoción de la industria manufacturera necesita nuevos instrumentos, como una financiación a largo plazo para las empresas, una promoción ordenada y eficaz de la actividad internacional de las empresas exportadoras, la mayoría de las cuales exportan productos manufacturados, una educación y formación profesional que esté alineada con estos objetivos, unos instrumentos que apoyen en especial el desarrollo la industria manufacturera, o la participación minoritaria pero significativa, del Estado en empresas españolas pertenecientes a sectores estratégicos entre otros. En resumen, esta Tesis propone una alternativa de política económica radicalmente diferente a la de dejar la industria manufacturera española a su suerte, y basar el futuro económico de España en una mano de obra barata. ABSTRACT The empirical evidence, applied to countries of certain size and economic development, shows that there exists a direct and positive relationship between industrial manufacturing activity, measured as a percentage of GDP, and certain economic variables, such as growth, unemployment and the foreign balance of trade. In the case of the latter, it is verified empirically that the countries with a percentage of manufacturing activity below 20% have a marked tendency for chronic deficits of the balance of trade, leading to persistent deficits in the current account, being that the former deficit is the main component of the latter. This brings about a continued increase in foreign debt that does not cease, and that will end at some point by disrupting the economy of the countries with these chronic deficits. The previous conclusions open the way to a new direction for economic policy, which promotes industrial manufacturing in each country. This is already a fact in 2014. Relevant countries, such as Germany or France in the EU, even the US and ultimately the UK, and of course countries of East Asia such as Japan, South Korea and China, have been promoting their industrial manufacturing for years. It becomes significant that the ideological debate about the goodwill of the application of industrial policy by governments, against liberal theories that maintain public powers far from these kinds of activities, has taken a step towards a horizontal-cut generalized model, where countries, with almost no exception, rely on various instruments to develop their companies that go much further than the usual R&D. Industrial manufacture is therefore valued as vital for economic stability. Even the EU, proponent for decades of non-intervention policy that goes beyond R&D, has gone full circle, ending in 2012 by proclaiming that industrial manufacture is vital for the economic stability of the EU, that it must be promoted. They even mark precisely 20% as an objective for manufacturing as a percentage of GDP. In other words, it is a given that services are not an indefinite substitute for industry, and that therefore it has a limit as such. This rejects the notion that the increase in services at the cost of manufacture is not only healthy, but is also a symptom of development. This premise is no longer true for these and other countries. On the other hand, none of this happens in Spain, where industrial manufacture receives no special attention from the public authorities, and it slides on a downward slope of percentage contribution to GDP, which accelerates the economic crisis that begins in 2007, until manufacture reaches values of around 12% of GDP in 2013. The economic policy applied is that of cost deflation, with consequential effects on wages and the capacity of the economy to generate wealth. A model is proposed for cheaper labor, akin to that of the 1960s. As a relevant indicator of this situation, manufacturing exports from Spain have not grown technologically in the last 15 years. The situation is made worse by another significant fact: almost 40% of sales of the manufacturing industry originate from companies of foreign origin, which supposes on one hand a technological dependence on foreign countries, such as in the case of the automotive industry, and on the other hand uncertainty in its future, being that they are based on maintaining cheap labor in the future, which will slow economic progress of Spaniards working in these companies. The proposition of this Thesis is to bet on a growth model for Spain that has as one of its pillars the development of a solid manufacturing industry, with increasing technological content. For this, an industrial policy plan is proposed, which includes the creation of driving agents for this plan, which must be of maximum political level. If the various governments don’t understand and assume this necessity for support of industry in the long term, independent of political change, this plan will not be accomplished. To start it, the creation or reinforcement of numerous instruments to promote the manufacturing activities are proposed, with a fundamentally horizontal nature that goes far beyond the usual R&D, and that, in several cases, have a clear similarity with others existing in other countries, having been developed for years. The promotion of the manufacturing industry needs new instruments, such as the long-term financing of companies, an orderly and efficient promotion of international activity of exporting companies, the most of which export manufactured goods, education and professional training which is in tune with these objectives, some instruments which support in particular the development of the manufacturing industry, or the minor yet significant participation of the State in Spanish companies belonging to strategic sectors, among others. In summary, this Thesis proposes an different alternative to the economic policy of leaving the manufacturing industry of Spain to its chances, and to base the economic future of Spain on a cheaper labor force.

Patents and Economic Activity: The Need to Develop Prediction Methods for Patent Applications

Since the decade of the 1980’s the literature on economic development began paying attention to the cases of countries which were industrialized after the first industrial revolution. One of the most relevant aspects analyzed has been the role of technology as a factor which promotes or delays the process of catching up with technology leaders. As result of this interest, new and more adequate indicators were identified to provide a coherent explanation for technological activities and their relationship with economic efficiency. Although the earliest studies focused on analyzing the activities of research and development (R&D), recently the focus of analysis has shifted to another type of variables, more oriented towards the processes of innovation and the gathering of knowledge and capabilities, in which patents provide relevant information.

How Can Local Manufacturing Improve Economic Sustainability? Saint Brissant: a case study of local manufacturing in Spain

Fast-fashion retailers and mass production dominate the fashion and apparel industry. Increased globalization, labor intensity and outsourcing to developing countries are fostering the interest in sustainability within the industry. There is a growth of a new movement attempting to offset the demand for fast fashion, "Slow Fashion" movement. Slow fashion is not time-based but quality-based approach in which designers, buyers, retailers and consumers are more aware of the impacts on workers, communities and ecosystems (Fletcher 2007). European Union has also some critical targets to reach by 2020. Spain, specifically, has to meet some requirements in terms of economy and sustainability. This exploratory study analyzed how slow fashion concept, precisely manufacturing locally, could improve economic development. Local manufacturing, its impact on economic development and the challenges of Spanish market are illustrated through a case study of one Spanish fashion brand, Saint Brissant.

The role of private sector in development: The relation between public-private investment in infrastructure and agricultural exports in developing countries

Increasing foreign private investment in developing countries explains why the Public-Private Investment (PPI) is becoming a key tool to reach the development goal. This article analyzes the relation between PPI in infrastructure and agricultural exports in developing countries. We use the panel data approach (52 countries and 17 years). Results show that PPI in infrastructure has a positive impact on agricultural exports of developing countries. The impact is greater in developing countries with higher income rates. This suggests that the lower income countries require the intervention of public sector without which private investment cannot help to economic development.