999 resultados para Inclinação canino maxilar
Resumo:
Pós-graduação em Engenharia Mecânica - FEIS
Resumo:
Pós-graduação em Ciência Animal - FMVA
Resumo:
When well indicated, the orthodontic surgical approach is the ideal treatment mean for Skeletal Class III adult patients. To improve facial esthetic results from orthognatic surgery, the leveling and alignment of maxillary dental arch must be achieved with minimal inclination and projection or even retro-inclination of anterior upper teeth. During a pre-surgical phase of 12 months, headgear bilateral force of 150 g/F was applied to the upper molars of a 22 years old male compliant patient with Class III skeletal malocclusion, to provide an upper teeth control of mesial tipping and projection during alignment and leveling. The ideal occlusal parameters required for surgical procedure were achieved without dental extractions permitting a total treatment period of 37 months. The outcomes remained stable over 3 years follow up after the removal of the appliance. The results indicate that, although headgear use depends greatly on patient compliance, when well indicated it is an interesting alternativetopromote dentaldecompensationon pre-surgical period, in order to allow surgical correction of skeletal Class III malocclusion.
Resumo:
In this study, it is proposed to evaluate the anteroposterior position of mandible in children with Angle Class II, division 1 malocclusions, to compare two different methods of evaluating the jaw position and verifying the correlation between these two methods. We selected 26 Brazilian children with vertical growth pattern and Angle Class II, division 1 malocclusions, aged between 7 years and 8 months to 9 years and 6 months. The evaluation of the anteroposterior position of the mandible was performed with the use of lateral cephalograms by cephalometric angular SNB and linear Pog-Nperp. Based on the results obtained, it was concluded that the SNB identified more children with mandibular retrusion than Pog-Nperp; the increased tip of the SN plane may have decreased values of SNB; Pog-Nperp minimizes the possibility of error in the anteroposterior position of the mandible, since it eliminates the variable tip of the anterior skull base (SN plane); none of the cephalometric measurements used are able to eliminate the influence of the nasion point in the anterior-posterior and vertical position; correlation between SNB and Pog-Nperp is very low.
Resumo:
Immediate reutilization of the expanding action in a case of rapid maxillary expansion surgically assisted. The orthopedic rapid maxillary expansion (RME) and rapid maxillary expansion surgically assisted (RMESA) are conducted with the aim of giving an appropriate jaw, capable of providing a normal occlusion. In extreme cases, where there is a severe atresia, it is necessary to perform an expansion beyond that allowed by the expander, followed by another conventional device or a butterfly expander, when the atresia is in the anterior maxillary region. In this situation, there are two options: wait about 90 days to allow intermaxillary suture restructuring and perform a new RME / RMESA or proceed immediately to the expansion process. Considering the biological cost, financial and clinical time, the procedure of reusing the immediate expander action becomes the technique of choice in these cases, been the operational procedure performed simplified and in just four steps. This work will show a case report where, after accomplishing the RMESA was observed that even after changing the shape of the maxillary arch, the severity of atresia could not be corrected, especially in the anterior region, and more expansion was needed. Aiming to correct the atresia in the anterior maxilla, the technique used was to reuse the immediate expander action through the change of an intraoral screw expander for a conventional butterfly type screw expander.
Resumo:
Patients with Class II division 2 malocclusion and mandibular retrusion have limited treatment options after the growth peak, such as surgical-orthodontic treatment or mandibular advancement devices. Among bite-jumping devices, the Herbst appliance allows greater increase of mandibular growth since it does not require patient compliance and allows continuous use. This case report presents the treatment of a Class II division 2 malocclusion in a patient after growth peak, performed in two stages. The first stage included the upper incisors proclination and overjet increase with multibracket appliance to benefit next stage. The second stage involved mandibular advancement using Herbst appliance aiming to correct the Class II molar relationship. The treatment resulted in a stable occlusion with periodontal health, normal functions and facial aesthetics improvement. Dental and skeletal changes arising from treatment could be assessed by cephalometric analysis and superimposition of pretreatment and post-treatment cephalometric tracings. Antero-posterior discrepancy was corrected by means of dental movement as well as by mandibular growth increment stimulated by the Herbst appliance.
Resumo:
The aim of this study was to evaluate the vertical and horizontal dentoskeletal changes induced by the Klammt Open Elastic Activator in the treatment of the Class II Division 1 malocclusion. The sample of 34 children was divided into two groups of 17 subjects each (ten girls, seven boys), matched by age and gender and with an initial mean age of 8.5 years. The data was analyzed using a Student's t-test for intragroup and intergroup comparison. The results showed that the appliance promoted dentoalveolar restriction of the maxilar growth within normal anteroposterior and vertical growth of the maxillary apical base; increment in the vertical displacement the mandibular symphysis associated with normal horizontal growth of the mandible; palatal tipping of the upper incisors; restriction of the anterior migration of the upper molars; greater eruption pattern and normal anterior displacement of the lower incisors and molars. It was concluded that Klammt appliance induce changes that are predominantly horizontal dentoalveolar in upper arch and vertical dentoalveolar in lower arch and vertical skeletal changes in the mandible.
Resumo:
The maxillary atresia is a alteration in the transverse dimension that can result in a unilateral or bilateral crossbite. For correction of atresia of the upper dental arch appliances with the intent to expand the arch of orthopedic or orthodontic manner are used, obtaining across-compatibility between the dental arches. The purpose of this study was to evaluate the dimensional changes of the maxillary in patients in the mixed dentition with atresia in the upper dental arch, using occlusal radiographs taken before, after rapid maxillary expansion and after removal of the appliance. Methods: the sample consisted of 35 patients who used the appliance type conventional Haas, in the mixed dentition, according to the standard protocol for installation, activation, containment and removal of the appliances rapid maxillary expansion. Results: the results confirm that the suture opening occurs in greater quantities in the anterior (4.3 mm) than posterior to (3.74 mm), representing a triangular opening of 7 degrees on average with the posterior opening 87% of the quantity of anterior opening. The molars region expanded about 5 mm, and the base bone 3.7 mm, representing a 74% bone expansion of the expansion teeth.
Resumo:
Objective: evaluate the immediate dental and skeletal changes induced by the Herbst appliance on early treatment of Angle´s Class II malocclusion. Material and Method: several electronic databases such as Scopus, Pub Med, Medline, Cochrane Library, Lilacs and Scielo were searched. The abstracts that fullfilled the selection criteria were selected and those that did not provide enough information about these criteria were selected but the final decision of including them or not on the research, was taken after the complete reading of the article. The selection criteria were: clinical studies with Class II individuals, both male and female, with initial age of 7 to 10 years, treated with the Herbst appliance that analysed the dental and/or skeletal changes evaluated on lateral cephalometric radiographs; researches where the treatment performed did not involve extractions or surgical interventions; studies that included patients without syndromes or health concerns and articles published in English or Portuguese. Results and Conclusions: five articles were selected. The articles showed that significant changes happened in the mandibular sagittal lenght, on facial convexity angle, on maxillo-mandibular relationship, on retroclination of the upper incisors and on distal movement of the upper molars, on proclination of the lower incisors and on extrusion of the lower molars. The appliance exerted a limited effect on the anterior relocation of the maxillary complex and on facial heights. However, more studies about the performance of the Herbst appliance on early treatment of Class II are needed.
Avaliação das dimensões e relacionamento dos arcos dentários após tratamento com Bionator de Balters
Resumo:
The deficiency of data in the literature took us to evaluate the Bionator of Balters appliance in the alterations of the dimensions and the relationship of the dental archs in children with malocclusion Class II, division 1 of Angle. The experimental group was constituted by 36 pairs cast Caucasians patients, aged between 7 years and 10 months - 11 years and 8 months, being 10 females and 8 males. The Levene´s test showed statistical evidences of likeness among the groups. Statistical analysis was preceded and showed significant alterations (p < 0,005) in the variable indicatives of maxillary first molars' distance, overjet, upper arch total length, upper arch anterior length, right molar relationship, left molar relationship, right canine relationship and left canine relationship. On the other hand, there wasn't significant alteration related to the lower arch and maxillary intercanines distance. The Balters' Bionator appliance had a favorable effect in the improvement of the correction of the malocclusion in Class II (foremost in molars and canines relationship) and transversal increase of the upper arch, mainly in the posterior area of arch.
Resumo:
The aim of this study was to evaluate the stability of the conservative condylectomy technique and articular disc repositioning as the surgical treatment approach for management of mandibular condylar osteochondroma, with appropriate Orthognathic surgery. Fifteen patients (12 females and 3 males), average age of 32.3 years (range, 13 to 56 years), with unilateral active osteochondroma of the mandibular condyle were analyzed. All patients underwent conservative condylectomy, recontouring of the remaining condylar neck stump and articular disc repositioned and indicated orthognatic surgical procedures. Average post surgical follow-up was 19 months. Each patient's lateral cephalograms were traced at 3 intervals (presurgery, immediate post surgery and long-term follow-up). Immediate after surgery the oclusal plane angle decreased -2.8 ± 4.5o, the maxillomandibular complex rotated counter-clockwise with advancement at menton 5.3 ± 5.6 mm, pogonion 5.0 ± 5.1 mm, B point 3.4 ± 4.2 mm and A point 1.0 ± 1.5 mm. The long-term follow-up showed significant changes in overbite (-0.6 ± 0.5 mm) and SNGoMe (0,93° ± 1,53°). Horizontally and vertically small instabilities occurred in Me (-1.21 ± 1.94 mm) and PNS (-1.48 ± 1.67 mm) respectively. The treatment protocol studied produced counterclockwise rotation and maxillofacial mandibular advancement. The long-term follow-up showed solid dental and skeletal stability with horizontal instability of Me and PNS in the vertical direction.
Resumo:
The aim of an orthodontic treatment is the achievement of a balanced, esthetic and, most of all, stable, intra and inter arches relationship. A common problem observed in occlusion is posterior crossbite and atresic maxilla. This problem may be treated by slow expansion, rapid expansion or surgically assisted expansion. For the present study cast models of 14 children between 7 and 11 years old were evaluated. There were 7 male and 7 female subjects that presented posterior crossbite and needed rapid maxillary expansion. The Hyrax appliance performed the therapy for correction of this transversal alteration, which is a common possibility in the treatment of this malocclusion. It was observed that the distance between the upper first molars and upper cuspids increased significantly; the length of the upper arch decreased and its perimeter increased significantly. At the lower arch there were no dimensional changes.
Resumo:
The Herbst appliance is currently one of the most used appliances for the correction of Class II division 1 with mandibular retrusion. When used in peak, or just after the peak of growth it can result in some skeletal gain, which is favorable to the correction of anteroposterior discrepancy with effective and stable results. This article aims to report a case of a patient with malocclusion Class II division 1 with mandibular retrusion, associated with maxillary protusion, treated in two stages: with Herbst splint metallic appliance followed by fixed appliance orthodontic treatment.
Resumo:
The Jasper Jumper appliance was developed as a fixed orthopedic device that is connected to the upper and lower leveling arches to promote the Class II correction by restricting the maxillary growth (headgear effect), mandibular growth inducement (activator effect) and dentoalveolar changes.
Resumo:
The aim of the present study was to analyze the etiology, type and treatment employed in the orbito-zygomatic fractures (OZ). Also, postoperative complications are described and correlated with the type of treatment used. Fifty patients with OZ fractures were evaluated. Orbital fractures in which the zygomatic bone was not involved were excluded. Epidemiologic data and characteristics of treatment such as the type of material used for osteosynthesis, number of anatomical sites on which rigid internal fixation (RIF) was applied, surgical approaches and associated complications were recorded. The main causes of trauma were motorcycle and bicycle accidents, constituting 52% of the sample. The osteosynthesis system used was the 2.0 mm, except in four patients in whom the 1.5mm system was used for fixation at the infra-orbital rim. A total of 18% of the patients required reconstruction of the internal orbit and in all cases titanium mesh was used. 46% of the patients received RIF in three anatomical sites, most in the fronto-zygomatic suture, infra-orbital rim and zygomatic-maxillary buttress. The most frequent complication was paresthesia of the infra-orbital nerve (34 patients, 68%). Other findings were also discussed with the intent of better understanding the treatment of the OZ fractures.